Related references
Note: Only part of the references are listed.Contact angles: history of over 200 years of open questions
Jaroslaw W. Drelich et al.
SURFACE INNOVATIONS (2020)
From Austenitic Stainless Steel to Expanded Austenite-S Phase: Formation, Characteristics and Properties of an Elusive Metastable Phase
Francesca Borgioli
METALS (2020)
Effects of Surface Modification by Means of Low-Temperature Plasma Nitriding on Wetting and Corrosion Behavior of Austenitic Stainless Steel
Francesca Borgioli et al.
COATINGS (2020)
Improving the surface durability of patterned AISI 316LM steels by nitriding treatment for dry friction sliding
A. Pavlik et al.
TRIBOLOGY INTERNATIONAL (2020)
Plasma nitriding under low temperature improves the endothelial cell biocompatibility of 316L stainless steel
Janine K. F. S. Braz et al.
BIOTECHNOLOGY LETTERS (2019)
Wetting Criteria of Intrinsic Contact Angle To Distinguish between Hydrophilic and Hydrophobic Micro-/Nanotextured Surfaces: Experimental and Theoretical Analysis with Synchrotron X-ray Imaging
Dong In Yu et al.
LANGMUIR (2019)
The effect of sharp solid edges on the droplet wettability
Zhanlong Wang et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2019)
Low-Temperature Plasma Nitriding of Mini-/Micro-Tools and Parts by Table-Top System
Tatsuhiko Aizawa et al.
APPLIED SCIENCES-BASEL (2019)
Assessment and Interpretation of Surface Wettability Based on Sessile Droplet Contact Angle Measurement: Challenges and Opportunities
Chun Haow Kung et al.
ADVANCED MATERIALS INTERFACES (2019)
Surface Modification of Austenitic Stainless Steel by Means of Low Pressure Glow-Discharge Treatments with Nitrogen
Francesca Borgioli et al.
COATINGS (2019)
Reversible wettability transition between superhydrophilicity and superhydrophobicity through alternate heating-reheating cycle on laser-ablated brass surface
Xinyi Li et al.
APPLIED SURFACE SCIENCE (2019)
Is expanded austenite really a solid solution? Mossbauer observation of an annealed AISI 316L nitrided sample
T. Czerwiec et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Recent advances of bioinspired functional materials with specific wettability: from nature and beyond nature
Yihan Sun et al.
NANOSCALE HORIZONS (2019)
Managing water on heat transfer surfaces: A critical review of techniques to modify surface wettability for applications with condensation or evaporation
M. Edalatpour et al.
APPLIED ENERGY (2018)
How does substrate roughness affect the service life of a superhydrophobic coating?
Xin Zhang et al.
APPLIED SURFACE SCIENCE (2018)
Recent advances in droplet wetting and evaporation
D. Brutin et al.
CHEMICAL SOCIETY REVIEWS (2018)
Superior lubrication properties of biomimetic surfaces with hierarchical structure
Yan Lu
TRIBOLOGY INTERNATIONAL (2018)
Shape Evolution of Droplets Growing on Linear Microgrooves
Ciro Semprebon et al.
LANGMUIR (2018)
Enhancement of Pitting Corrosion Resistance of Austenitic Stainless Steel Through Deposition of Amorphous/Nanocrystalline Oxy-nitrided Phases by Active Screen Plasma Treatment
Yang Li et al.
MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS (2018)
Understanding the wettability of rough surfaces using simultaneous optical and electrochemical analysis of sessile droplets
Beniamin Zahiri et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2017)
Microstructures and tribological behaviour of oxynitrided austenitic stainless steel
Yang Li et al.
VACUUM (2017)
On the degradation of superhydrophobic surfaces: A review
Vahid Mortazavi et al.
WEAR (2017)
Contact angles and wettability: towards common and accurate terminology
Abraham Marmur et al.
SURFACE INNOVATIONS (2017)
A review on the mechanical and thermodynamic robustness of superhydrophobic surfaces
Liam R. J. Scarratt et al.
ADVANCES IN COLLOID AND INTERFACE SCIENCE (2017)
Recent progress in superhydrophobic coatings used for steel protection: A review
Aziz Fihri et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2017)
Recent advances in the mechanical durability of superhydrophobic materials
Athanasios Milionis et al.
ADVANCES IN COLLOID AND INTERFACE SCIENCE (2016)
Aging effect on the wettability of stainless steel
Doogon Kim et al.
MATERIALS LETTERS (2016)
Moving superhydrophobic surfaces toward real-world applications
Xuelin Tian et al.
SCIENCE (2016)
Design of anti-icing surfaces: smooth, textured or slippery?
Michael J. Kreder et al.
NATURE REVIEWS MATERIALS (2016)
Superhydrophobic Coatings and Their Durability
N. Cohen et al.
MATERIALS AND MANUFACTURING PROCESSES (2016)
Volume evolution of small sessile droplets evaporating in stick-slip mode
Dinghua Hu et al.
PHYSICAL REVIEW E (2016)
A review of the recent advances in superhydrophobic surfaces and the emerging energy-related applications
P. Zhang et al.
ENERGY (2015)
Bioinspired Engineering of Thermal Materials
Peng Tao et al.
ADVANCED MATERIALS (2015)
On the lifetimes of evaporating droplets
J. M. Stauber et al.
JOURNAL OF FLUID MECHANICS (2014)
Nonequilibrium Gibbs' Criterion for Completely Wetting Volatile Liquids
Yannis Tsoumpas et al.
LANGMUIR (2014)
Transient Volume of Evaporating Sessile Droplets: 2/3, 1/1, or Another Power Law?
Tuan A. H. Nguyen et al.
LANGMUIR (2014)
Influence of surface morphology and roughness on water wetting properties of low temperature nitrided austenitic stainless steels
Francesca Borgioli et al.
MATERIALS CHARACTERIZATION (2014)
Surface engineering for phase change heat transfer: A review
Daniel Attinger et al.
MRS ENERGY & SUSTAINABILITY (2014)
Biocompatibility studies of low temperature nitrided and collagen-I coated AISI 316L austenitic stainless steel
M. Martinesi et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2013)
Evaporation of pure liquid sessile and spherical suspended drops: A review
H. Yildirim Erbil
ADVANCES IN COLLOID AND INTERFACE SCIENCE (2012)
Wetting Transitions and Depinning of the Triple Line
E. Bormashenko et al.
LANGMUIR (2012)
Superhydrophobic textures for microfluidics
Olga I. Vinogradova et al.
MENDELEEV COMMUNICATIONS (2012)
Hemocompatibility evaluation of plasma-nitrided austenitic stainless steels at low temperature
Yun-Ho Lin et al.
SURFACE & COATINGS TECHNOLOGY (2012)
Evaluation of the biocompatibility of S-phase layers on medical grade austenitic stainless steels
Joseph Buhagiar et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2011)
Suspension of Water Droplets on Individual Pillars
T. Toth et al.
LANGMUIR (2011)
Equilibrium Contact Angles of Liquid Droplets on Ideal Rough Solids
Hie Chan Kang et al.
LANGMUIR (2011)
Natural and biomimetic artificial surfaces for superhydrophobicity, self-cleaning, low adhesion, and drag reduction
Bharat Bhushan et al.
PROGRESS IN MATERIALS SCIENCE (2011)
Lattice rotation induced by plasma nitriding in a 316L polycrystalline stainless steel
J. C. Stinville et al.
ACTA MATERIALIA (2010)
S-phase surface engineering of Fe-Cr, Co-Cr and Ni-Cr alloys
H. Dong
INTERNATIONAL MATERIALS REVIEWS (2010)
Importance of surface activation for nitrided layer formation on austenitic stainless steel
J. Baranowska
SURFACE ENGINEERING (2010)
Fundamental and Innovations in Plasma Assisted Diffusion of Nitrogen and Carbon in Austenitic Stainless Steels and Related Alloys
Thierry Czerwiec et al.
PLASMA PROCESSES AND POLYMERS (2009)
Wetting and Roughness
David Quéré
Annual Review of Materials Research (2008)
How Wenzel and Cassie were wrong
Lichao Gao et al.
LANGMUIR (2007)
On the occurrence of dual diffusion layers during plasma-assisted nitriding of austenitic stainless steel
T Czerwiec et al.
SURFACE & COATINGS TECHNOLOGY (2006)
Evaporative deposition patterns: Spatial dimensions of the deposit
YO Popov
PHYSICAL REVIEW E (2005)
Line energy and the relation between advancing, receding, and young contact angles
R Tadmor
LANGMUIR (2004)