☆ 4.8 Article

Stabilized Multi-Electron Reactions in a High-Energy Na4Mn0.9CrMg0.1(PO4)3 Sodium-Storage Cathode Enabled by the Pinning Effect

SMALL (2022)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

A novel Fe-defect induced pure-phase Na4Fe2.91(PO4)2P2O7 cathode material with high capacity and ultra-long lifetime for low-cost sodium-ion batteries

Along Zhao et al.

Summary: In this study, a novel pure-phase Na4Fe2.91(PO4)(2)(P2O7) cathode material was prepared by introducing a small amount of Fe defects in the lattice of NFPP. First-principles calculations revealed that the Fe defects result in lower band gap and migration energy barriers, leading to higher electron and Na+ ion conductivity. The material exhibited high discharge capacity, excellent rate performance, and outstanding long cycle stability, showcasing the feasibility of the defect regulation strategy for high-quality, low-cost sodium-ion batteries.

NANO ENERGY (2022)

Add to Collection

Article Chemistry, Physical

Mn-Rich Phosphate Cathodes for Na-Ion Batteries with Superior Rate Performance

Chunliu Xu et al.

Summary: In this study, a selective replacement of vanadium rather than manganese in the Na4VMn(PO4)(3) system was developed to enhance the anode performance and structural stability. Experimental results confirmed that the Al-substituted Na4V0.8Al0.2Mn(PO4)(3) anode exhibited favorable ion kinetics and structure stability.

ACS ENERGY LETTERS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Ultra-stable carbon-coated sodium vanadium phosphate as cathode material for sodium-ion battery

Di Wang et al.

Summary: High-performance conductive carbon-coated Na3V2(PO4)(3) materials were successfully prepared via a simple and facile solid-state method, showing excellent cycling stability and rate performances in sodium-ion batteries. The carbon-coated composite electrodes exhibited high initial specific capacity and maintained high coulombic efficiency even at high rates, indicating great potential for large-scale productions and applications.

RARE METALS (2022)

Add to Collection

Review Electrochemistry

Advanced characterizations and measurements for sodium-ion batteries with NASICON-type cathode materials

Yukun Liu et al.

Summary: This article summarizes advanced characterization techniques used for NASICON-structured cathode materials for SIBs, with a focus on both operando and ex situ techniques that help to investigate the relationships among phase, composition, and valence variations within electrochemical responses.

ESCIENCE (2022)

Add to Collection

Article Chemistry, Physical

3D porous spheroidal Na4Mn0.9Ce0.1V(PO4)3@CeO2/C cathode for high-energy Na ion batteries

Kun Wang et al.

Summary: The 3D porous spheroidal Ce3+-doped NMVP@CeO2/C cathode showed improved electronic conductivity and stabilized crystalline structure due to the synergistic effect of Ce3+ doping in the crystal framework and CeO2 surface coating. The optimized NMVP cathode delivered superior discharge performance and long cycle life, with potential for practical utilization in full cells demonstrated through successful assembly.

JOURNAL OF MATERIALS CHEMISTRY A (2022)

Add to Collection

Review Chemistry, Physical

Materials Design for High-Safety Sodium-Ion Battery

Chao Yang et al.

Summary: Sodium-ion batteries are gaining attention for their resource abundance and cost advantages, but safety is crucial, especially for large-scale applications. Thermal energy generated in typical batteries is the main cause of thermal abuse, highlighting the need for further research on improving battery safety.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Activating a Multielectron Reaction of NASICON-Structured Cathodes toward High Energy Density for Sodium-Ion Batteries

Mingzhe Chen et al.

Summary: The demand for efficiently storing and utilizing electricity from renewable energy resources has led to an increased interest in sodium-ion battery technology. By utilizing a doping strategy with Cr in NASICON-structured cathodes, multielectron redox reactions are activated, resulting in significantly improved energy density, overcoming the bottleneck for commercializing sodium-ion batteries.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

A robust carbon coating of Na3V2(PO4)3 cathode material for high performance sodium-ion batteries

Liying Shen et al.

Summary: Na3V2(PO4)(3) is a promising electrode material for sodium-ion batteries, but faces limitations due to poor electronic conductivity. A two-step method was used to prepare carbon-coated Na3V2(PO4)(3) materials with remarkable electrochemical performance, surpassing most advanced cathode materials reported in literature.

CHINESE CHEMICAL LETTERS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Elevating Energy Density for Sodium-Ion Batteries through Multielectron Reactions

Yongjie Zhao et al.

Summary: The study introduces a NASICON-structured Na4MnCr(PO4)(3) cathode with high specific capacity and operation potential, demonstrating a distinct three-electron redox reaction during the insertion/extraction process. The highly stable NASICON structure with minimal volume variation ensures long-term cycling stability, with impedance analysis and interface characterization revealing the correlation between capacity fading and cathode electrolyte interphase evolution at high potential.

NANO LETTERS (2021)

Add to Collection

Article Chemistry, Physical

Fast sodium intercalation in Na3.41£0.59FeV(PO4)3: A novel sodium-deficient NASICON cathode for sodium-ion batteries

Mohammed Hadouchi et al.

Summary: The new material exhibits high initial discharge capacity and outstanding rate capability and cycle life, attributed to its small volume change and single-phase mechanism. Experimental data and computational methods reveal the mechanism of sodium extraction and diffusion kinetics. These findings contribute to enhancing the electrochemical performance of sodium-ion batteries.

ENERGY STORAGE MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Achieving highly reversible and fast sodium storage of Na4VMn(PO4)3/C-rGO composite with low-fraction rGO via spray-drying technique

Guijia Cui et al.

Summary: In this study, an ultrahigh rate capable and long cycle life NVMP/C-rGO composite was successfully prepared using spray-drying technique, showing excellent electron conductivity as a cathode in sodium ion batteries. This composite material delivered high reversible capacities at different rates, with outstanding capacity retention over 500 cycles.

NANO ENERGY (2021)

Add to Collection

Article Chemistry, Physical

A Novel NASICON-Typed Na4VMn0.5Fe0.5(PO4)3 Cathode for High-Performance Na-Ion Batteries

Chunliu Xu et al.

Summary: A novel ternary NASICON-type Na4VMn0.5Fe0.5(PO4)(3)/C cathode is designed with large reversible capacity, high voltage, and good stability. The cathode exhibits excellent rate capacity and cycling durability, outperforming Na4VFe(PO4)(3)/C and Na4VMn(PO4)(3)/C. The synergetic contributions of multimetal ions and facilitated Na+ migration are confirmed, providing new perspectives for high-performance Na-ion batteries.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Transition-Metal Vacancy Manufacturing and Sodium-Site Doping Enable a High-Performance Layered Oxide Cathode through Cationic and Anionic Redox Chemistry

Qiuyu Shen et al.

Summary: A novel P2-Na0.76Ca0.05[Ni0.230.08Mn0.69]O-2 cathode material with joint cationic and anionic redox activities has been developed, showing enhanced energy density and cycling stability. This research provides new opportunities for designing high-energy-density and high-stability layered sodium oxide cathodes through tuning local chemical environments.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Review Nanoscience & Nanotechnology

Fundamentals, status and promise of sodium-based batteries

Robert Usiskin et al.

Summary: Sodium batteries have made significant progress in recent years and are considered promising candidates for mitigating supply risks associated with lithium batteries. This review compares the fundamental principles and specific materials of sodium and lithium batteries, and evaluates the performance of recent prototype sodium cells.

NATURE REVIEWS MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Three Electron Reversible Redox Reaction in Sodium Vanadium Chromium Phosphate as a High-Energy-Density Cathode for Sodium-Ion Batteries

Yongjie Zhao et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

A Novel NASICON-Type Na4MnCr(PO4)3 Demonstrating the Energy Density Record of Phosphate Cathodes for Sodium-Ion Batteries

Jian Zhang et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Isostructural and Multivalent Anion Substitution toward Improved Phosphate Cathode Materials for Sodium-Ion Batteries

Mei-Yi Wang et al.

SMALL (2020)

Add to Collection

Article Chemistry, Physical

A High-Energy NASICON-Type Cathode Material for Na-Ion Batteries

Jingyang Wang et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Engineering of Polyanion Type Cathode Materials for Sodium-Ion Batteries: Toward Higher Energy/Power Density

Huangxu Li et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Full Activation of Mn4+/Mn3+ Redox in Na4MnCr(PO4)3 as a High-Voltage and High-Rate Cathode Material for Sodium-Ion Batteries

Wei Zhang et al.

SMALL (2020)

Add to Collection

Article Chemistry, Physical

Dual carbon decorated Na3MnTi(PO4)3: A high-energy-density cathode material for sodium-ion batteries

Ting Zhu et al.

NANO ENERGY (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Symmetric Sodium-Ion Battery Based on Dual-Electron Reactions of NASICON-Structured Na3MnTi(PO4)3 Material

Yu Zhou et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Impact of Mg2+and Al3+Substitutions on the Structural and Electrochemical Properties of NASICON-NaxVMn0.75M0.25(PO4)3(M = Mg and Al) Cathodes for Sodium-Ion Batteries

Subham Ghosh et al.

SMALL (2020)

Add to Collection

Article Multidisciplinary Sciences

Rational design of layered oxide materials for sodium-ion batteries

Chenglong Zhao et al.

SCIENCE (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Polyanion-type cathode materials for sodium-ion batteries

Ting Jin et al.

CHEMICAL SOCIETY REVIEWS (2020)

Add to Collection

Article Chemistry, Physical

Multidimensional Na4VMn0.9Cu0.1(PO4)3/C cotton-candy cathode materials for high energy Na-ion batteries

Vaiyapuri Soundharrajan et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Article Chemistry, Physical

Highly efficient, fast and reversible multi-electron reaction of Na3MnTi(PO4)3 cathode for sodium-ion batteries

Huangxu Li et al.

ENERGY STORAGE MATERIALS (2020)

Add to Collection

Article Multidisciplinary Sciences

NASICON-type air-stable and all-climate cathode for sodium-ion batteries with low cost and high-power density

Mingzhe Chen et al.

NATURE COMMUNICATIONS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Realizing a High-Performance Na-Storage Cathode by Tailoring Ultrasmall Na2FePO4F Nanoparticles with Facilitated Reaction Kinetics

Fanfan Wang et al.

ADVANCED SCIENCE (2019)

Add to Collection

Article Multidisciplinary Sciences

Tailoring sodium intercalation in graphite for high energy and power sodium ion batteries

Zheng-Long Xu et al.

NATURE COMMUNICATIONS (2019)

Add to Collection

Article Chemistry, Physical

Realizing Three-Electron Redox Reactions in NASICON-Structured Na3MnTi(PO4)3 for Sodium-Ion Batteries

Ting Zhu et al.

ADVANCED ENERGY MATERIALS (2019)

Add to Collection

Review Chemistry, Physical

Research Progress in Multielectron Reactions in Polyanionic Materials for Sodium-Ion Batteries

Rui Liu et al.

SMALL METHODS (2019)

Add to Collection

Article Chemistry, Physical

A NASICON-Type Positive Electrode for Na Batteries with High Energy Density: Na4MnV(PO4)3

Fan Chen et al.

SMALL METHODS (2019)

Add to Collection

Article Chemistry, Physical

Understanding the Electrochemical Mechanisms Induced by Gradient Mg2+ Distribution of Na-Rich Na3+xV2-xMgx(PO4)(3)/C for Sodium Ion Batteries

Hui Li et al.

CHEMISTRY OF MATERIALS (2018)

Add to Collection

Review Chemistry, Physical

Prussian Blue Cathode Materials for Sodium-Ion Batteries and Other Ion Batteries

Jiangfeng Qian et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Highly Reversible Na Storage in Na3V2(PO4)(3) by Optimizing Nanostructure and Rational Surface Engineering

Yu Jiang et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

Article Nanoscience & Nanotechnology

A cost and resource analysis of sodium-ion batteries

Christoph Vaalma et al.

NATURE REVIEWS MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Na3MnZr(PO4)3: A High-Voltage Cathode for Sodium Batteries

Hongcai Gao et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)

Add to Collection

Review Chemistry, Multidisciplinary

Polyanion-Type Electrode Materials for Sodium-Ion Batteries

Qiao Ni et al.

ADVANCED SCIENCE (2017)

Add to Collection

Review Chemistry, Multidisciplinary

Challenges and Perspectives for NASICON-Type Electrode Materials for Advanced Sodium-Ion Batteries

Shuangqiang Chen et al.

ADVANCED MATERIALS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Prussian Blue@C Composite as an Ultrahigh-Rate and Long-Life Sodium-Ion Battery Cathode

Yinzhu Jiang et al.

ADVANCED FUNCTIONAL MATERIALS (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Subzero-Temperature Cathode for a Sodium-Ion Battery

Ya You et al.

ADVANCED MATERIALS (2016)

Add to Collection

Article Chemistry, Physical

Sodium Extraction from NASICON-Structured Na3MnTi(PO4)3 through Mn(III)/Mn(II) and Mn(IV)/Mn(III) Redox Couples

Hongcai Gao et al.

CHEMISTRY OF MATERIALS (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Anomalous Jahn-Teller behavior in a manganese-based mixed-phosphate cathode for sodium ion batteries

Hyungsub Kim et al.

ENERGY & ENVIRONMENTAL SCIENCE (2015)

Add to Collection

Article Chemistry, Physical

The First Report on Excellent Cycling Stability and Superior Rate Capability of Na3V2(PO4)3 for Sodium Ion Batteries

Kuppan Saravanan et al.

ADVANCED ENERGY MATERIALS (2013)

Add to Collection

Article Chemistry, Physical

Estimation of electronegativity values of elements in different valence states

Keyan Li et al.

JOURNAL OF PHYSICAL CHEMISTRY A (2006)

Add to Collection

Article Electrochemistry

Optimized LiFePO4 for lithium battery cathodes

A Yamada et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2001)

Add to Collection

Article Chemistry, Physical

A climbing image nudged elastic band method for finding saddle points and minimum energy paths

G Henkelman et al.

JOURNAL OF CHEMICAL PHYSICS (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.