☆ 4.6 Article

Recent Progress in the Topologies of the Surface Acoustic Wave Sensors and the Corresponding Electronic Processing Circuits

SENSORS (2022)

Related references

Note: Only part of the references are listed.

Article Engineering, Electrical & Electronic

Fabrication of high frequency SAW devices using tri-layer lift-off photolithography

Liam Kelly et al.

Summary: A new tri-layer lift-off photolithography technique is proposed for the fabrication of high frequency SAW devices, utilizing a BARC layer to improve resolution over traditional techniques. The technique enables reliable fabrication and excellent agreement with numerical results.

MICROELECTRONIC ENGINEERING (2022)

Add to Collection

Article Chemistry, Analytical

Topological Optimization of Circular SAW Resonators: Overcoming the Discreteness Effects

Sergey Yu. Shevchenko et al.

Summary: This study proposes a design for a ring-shaped surface acoustic wave (SAW) resonator sensitive element, and analyzes its characteristics and suggests optimization strategies, with a focus on temperature stability. The design is further optimized to narrow the bandwidth and improve signal detection, while considering technological limitations and the impact of lithography defects. The study validates several design options for the interdigital transducer (IDT) and demonstrates how its pin geometry can be optimized. The results will be used for prototyping and printing ring resonators on a substrate using photolithography.

SENSORS (2022)

Add to Collection

Review Chemistry, Analytical

Surface Acoustic Wave (SAW) Sensors: Physics, Materials, and Applications

Debdyuti Mandal et al.

Summary: This article introduces surface acoustic waves (SAWs) and their applications in sensors. By explaining the physics of guided SAWs and the piezoelectric materials used, it discusses how the materials and cuts can alter sensor functionality. It summarizes key electrode configurations and guidelines for generating different guided wave patterns, and explores the applications of SAW sensors in various fields and potential improvement plans in science and technology.

SENSORS (2022)

Add to Collection

Article Engineering, Electrical & Electronic

Anti-irradiation SAW temperature sensor based on 128° YX LiNbO3 single crystal

Caiqin Zhao et al.

Summary: Ferroelectric materials possess natural anti-irradiation property, making them highly applicable in aerospace fields. In this study, a LiNbO3-based surface acoustic wave (SAW) resonator temperature sensor was developed and showed high accuracy sensing capabilities in extreme conditions. The device was also tested under gamma-ray irradiation, and the results demonstrated the radiation resistance ability of SAW for the development of highly reliable temperature sensors in irradiation environments.

SENSORS AND ACTUATORS A-PHYSICAL (2022)

Add to Collection

Article Chemistry, Analytical

Current Development in Interdigital Transducer (IDT) Surface Acoustic Wave Devices for Live Cell In Vitro Studies: A Review

Mazlee Bin Mazalan et al.

Summary: Acoustics has a wide range of applications, and there has been increasing interest in the development of acoustic-based approaches for biological and biomedical purposes in recent years. This review focuses on the use of surface acoustic waves (SAW) based on interdigital transducers (IDT) for live-cell investigations. The article provides an overview of various IDT SAW devices used on cells and discusses the future applications of SAW techniques in live-cell studies.

MICROMACHINES (2022)

Add to Collection

Article Engineering, Environmental

High performance langasite based SAW NO2 gas sensor using 2D g-C3N4@TiO2 hybrid nanocomposite

Kedhareswara Sairam Pasupuleti et al.

Summary: In this study, a high-performance langasite-based surface acoustic wave (SAW) gas sensor for nitrogen dioxide (NO2) at room temperature was developed. The sensor exhibited excellent selectivity, sensitivity, and response time, as well as stability in various relative humidity conditions. The integration of 2D materials with metal oxides shows promise for environmental protection.

JOURNAL OF HAZARDOUS MATERIALS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Sensor applications based on AlGaN/GaN heterostructures

Kavita T. Upadhyay et al.

Summary: This paper provides a review of significant research work in the field of GaN-based sensor technologies, including classification of existing work, explanation of sensor sensing mechanisms, as well as the challenges and future opportunities facing current sensing systems.

MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2021)

Add to Collection

Article Chemistry, Analytical

Surface acoustic wave (SAW) sensor for volatile organic compounds (VOCs) detection with calix[4]arene functionalized Gold nanorods (AuNRs) and silver nanocubes (AgNCs)

Funda Kus et al.

Summary: The study focused on the detection of polar and nonpolar volatile organic compounds using novel sensing materials based on gold nanorods and silver nanocubes functionalized with Calix[4]arene. After modification, the sensors exhibited significantly enhanced sensitivity and selectivity towards chloroform and toluene, with sensitivity reaching six to eight times higher than individual responses.

SENSORS AND ACTUATORS B-CHEMICAL (2021)

Add to Collection

Article Engineering, Electrical & Electronic

A novel design method for SAW temperature sensor with monotonic and linear frequency-temperature behavior in wide temperature range

Ling Li et al.

SENSORS AND ACTUATORS A-PHYSICAL (2020)

Add to Collection

Article Chemistry, Analytical

SAW Chemical Array Device Coated with Polymeric Sensing Materials for the Detection of Nerve Agents

Jinuk Kim et al.

SENSORS (2020)

Add to Collection

Article Automation & Control Systems

Surface acoustic wave pressure sensor and its matched antenna design

Yuanyuan Li et al.

MEASUREMENT & CONTROL (2019)

Add to Collection

Article Chemistry, Analytical

Design of a Portable Orthogonal Surface Acoustic Wave Sensor System for Simultaneous Sensing and Removal of Nonspecifically Bound Proteins

Shuangming Li et al.

SENSORS (2019)

Add to Collection

Article Engineering, Electrical & Electronic

Fourier analysis of SAW resonance frequency variations for improved detection

Ionut Nicolae et al.

SENSORS AND ACTUATORS A-PHYSICAL (2019)

Add to Collection

Review Chemistry, Analytical

An Overview of High Frequency Acoustic Sensors-QCMs, SAWs and FBARs-Chemical and Biochemical Applications

Adnan Mujahid et al.

SENSORS (2019)

Add to Collection

Review Chemistry, Analytical

Bulk and Surface Acoustic Wave Sensor Arrays for Multi-Analyte Detection: A Review

Kerstin Laenge

SENSORS (2019)

Add to Collection

Article Chemistry, Analytical

Portable Low-Cost Electronic Nose Based on Surface Acoustic Wave Sensors for the Detection of BTX Vapors in Air

Daniel Matatagui et al.

SENSORS (2019)

Add to Collection

Article Computer Science, Information Systems

Full-SAW Microfluidics-Based Lab-on-a-Chip for Biosensing

Matted Agostini et al.

IEEE ACCESS (2019)

Add to Collection

Article Engineering, Electrical & Electronic

Optimization of interdigital transducers for the generation of surface acoustic waves over a large bandwidth (20-125 MHz)

Dame Fall et al.

SENSORS AND ACTUATORS A-PHYSICAL (2018)

Add to Collection

Article Engineering, Electrical & Electronic

Research of micro area piezoelectric properties of AlN films and fabrication of high frequency SAW devices

Fang Wang et al.

MICROELECTRONIC ENGINEERING (2018)

Add to Collection

Review Materials Science, Multidisciplinary

Advances in piezoelectric thin films for acoustic biosensors, acoustofluidics and lab-on-chip applications

Y. Q. Fu et al.

PROGRESS IN MATERIALS SCIENCE (2017)

Add to Collection

Article Chemistry, Analytical

Passive Downhole Pressure Sensor Based on Surface Acoustic Wave Technology

Sully M. M. Quintero et al.

SENSORS (2017)

Add to Collection

Article Chemistry, Analytical

Resonance Frequency Readout Circuit for a 900 MHz SAW Device

Heng Liu et al.

SENSORS (2017)

Add to Collection

Review Chemistry, Analytical

Surface Acoustic Wave (SAW) for Chemical Sensing Applications of Recognition Layers

Adnan Mujahid et al.

SENSORS (2017)

Add to Collection

Review Chemistry, Analytical

SAW Sensors for Chemical Vapors and Gases

Jagannath Devkota et al.

SENSORS (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Analysis of the sensitivity to pressure and temperature of a membrane based SAW sensor

Hugo Chambon et al.

INTERNATIONAL JOURNAL OF SMART AND NANO MATERIALS (2017)

Add to Collection

Article Biophysics

Fast and sensitive detection of foodborne pathogen using electrochemical impedance analysis, urease catalysis and microfluidics

Qi Chen et al.

BIOSENSORS & BIOELECTRONICS (2016)

Add to Collection

Article Physics, Condensed Matter

Surface acoustic wave devices for sensor applications

Liu Bo et al.

JOURNAL OF SEMICONDUCTORS (2016)

Add to Collection

Article Engineering, Multidisciplinary

Circuit Design of Surface Acoustic Wave Based Micro Force Sensor

Yuanyuan Li et al.

MATHEMATICAL PROBLEMS IN ENGINEERING (2014)

Add to Collection

Article Engineering, Electrical & Electronic

Development of wireless, batteryfree gyroscope based on one-port SAW delay line and double resonant antenna

Chen Fu et al.

SENSORS AND ACTUATORS A-PHYSICAL (2014)

Add to Collection

Article Engineering, Electrical & Electronic

Design and fabrication of SAW pressure, temperature and impedance sensors using novel multiphysics simulation models

G. A. Borrero et al.

SENSORS AND ACTUATORS A-PHYSICAL (2013)

Add to Collection

Article Biochemical Research Methods

Acoustic tweezers: patterning cells and microparticles using standing surface acoustic waves (SSAW)

Jinjie Shi et al.

LAB ON A CHIP (2009)

Add to Collection

Review Chemistry, Analytical

Surface acoustic wave sensors in the bioanalytical field: Recent trends and challenges

Thomas M. A. Gronewold

ANALYTICA CHIMICA ACTA (2007)

Add to Collection

Article Acoustics

Resonator filters using shear horizontal-type leaky surface acoustic wave consisting of heavy-metal electrode and quartz substrate

M Kadota et al.

IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL (2004)

Add to Collection

Article Engineering, Electrical & Electronic

Temperature coefficient of SAW frequency in single crystal bulk AIN

G Bu et al.

ELECTRONICS LETTERS (2003)

Add to Collection

© Peeref 2019-2024. All rights reserved.