Related references
Note: Only part of the references are listed.Evading strength and ductility trade-off in an inverse nacre structured magnesium matrix nanocomposite
Xi Luo et al.
ACTA MATERIALIA (2022)
Exceptional mechanical properties of aluminum matrix composites with heterogeneous structure induced by in-situ graphene nanosheet-Cu hybrids
Bowen Pu et al.
COMPOSITES PART B-ENGINEERING (2022)
Mechanical and wear properties of SiCp/CNT/Al6061 hybrid metal matrix composites
Pham Van Trinh et al.
DIAMOND AND RELATED MATERIALS (2022)
Enhancing strength and toughness synergistically via graphene-induced twinning in nanocrystalline nickel
Zhihao Jiang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)
Heterostructured materials: superior properties from hetero-zone interaction
Yuntian Zhu et al.
MATERIALS RESEARCH LETTERS (2021)
Improving ductility of bimodal carbon nanotube/2009Al composites by optimizing coarse grain microstructure via hot extrusion
K. Ma et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)
Enhanced strain hardening by bimodal grain structure in carbon nanotube reinforced Al-Mg composites
Xiaowen Fu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Structure optimization for improving the strength and ductility of heterogeneous carbon nanotube/Al-Cu-Mg composites
K. Ma et al.
CARBON (2021)
Enhancing high-temperature strength of (B4C+Al2O3)/Al designed for neutron absorbing materials by constructing lamellar structure
Y. N. Zan et al.
COMPOSITES PART B-ENGINEERING (2020)
Design of an in-situ multi-scale particles reinforced (Al2O3+ZrB2+AlN)/Al composite with high strength, elasticity modulus and thermal stability
Yihan Bian et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Simultaneous enhancement of strength and ductility with nano dispersoids in nano and ultrafine grain metals: a brief review
Yusheng Hu et al.
REVIEWS ON ADVANCED MATERIALS SCIENCE (2020)
Tailoring and characterization of carbon nanotube dispersity in CNT/6061Al composites
Malin Chen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Effect of ball milling time on graphene nanosheets reinforced Al6063 composite fabricated by pressure infiltration method
Zhenhe Yu et al.
CARBON (2019)
Macrodeformation twinning in a textured aluminum alloy via dynamic equal channel angular pressing
D. K. Qi et al.
JOURNAL OF MATERIALS SCIENCE (2019)
Additively manufactured hierarchical stainless steels with high strength and ductility
Y. Morris Wang et al.
NATURE MATERIALS (2018)
Tailoring the structure and mechanical properties of graphene nanosheet/aluminum composites by flake powder metallurgy via shift-speed ball milling
Yuanyuan Jiang et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
Regain Strain-Hardening in High-Strength Metals by Nanofiller Incorporation at Grain Boundaries
Zan Li et al.
NANO LETTERS (2018)
In-situ synthesis of graphene decorated with nickel nanoparticles for fabricating reinforced 6061Al matrix composites
Guang Liu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
High dislocation density-induced large ductility in deformed and partitioned steels
B. B. He et al.
SCIENCE (2017)
Modelling of carbon nanotube dispersion and strengthening mechanisms in Al matrix composites prepared by high energy ball milling-powder metallurgy method
Z. Y. Liu et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)
Toughening of aluminum matrix nanocomposites via spatial arrays of boron carbide spherical nanoparticles
Lin Jiang et al.
ACTA MATERIALIA (2016)
3D Microstructure-based finite element modeling of deformation and fracture of SiCp/Al composites
Jie Zhang et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2016)
Effects of mold temperature on the microstructure and tensile properties of SiCp/2024 Al-based composites fabricated via powder thixoforming
P. B. Li et al.
MATERIALS & DESIGN (2016)
Metal/ceramic interface structures and segregation behavior in aluminum-based composites
Xinming Zhang et al.
ACTA MATERIALIA (2015)
Modelling evidence of stress concentration mitigation at the micro-scale in polymer composites by the addition of carbon nanotubes
Valentin S. Romanov et al.
CARBON (2015)
Tensile behavior and strengthening mechanisms in a submicron B4C-reinforced Al trimodal composite
Hanry Yang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Mechanical properties of in-situ TiB2/A356 composites
Mingliang Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Enhanced strength and ductility in particulate-reinforced aluminum matrix composites fabricated by flake powder metallurgy
X. Z. Kai et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Strong and ductile particulate reinforced ultrafine-grained metallic composites fabricated by flake powder metallurgy
Xizhou Kai et al.
SCRIPTA MATERIALIA (2013)
Strong and ductile carbon nanotube/aluminum bulk nanolaminated composites with two-dimensional alignment of carbon nanotubes
Lin Jiang et al.
SCRIPTA MATERIALIA (2012)
Strength and Ductility of Bi-Modal Cu
Yonghao Zhao et al.
ADVANCED ENGINEERING MATERIALS (2011)
Strengthening in nanostructured 2024 aluminum alloy and its composites containing carbon nanotubes
H. J. Choi et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2011)
Extended twinning phenomena in Al-4%Mg alloys/B4C nanocomposite
Y. Li et al.
SCRIPTA MATERIALIA (2011)
A flake powder metallurgy approach to Al2O3/Al biomimetic nanolaminated composites with enhanced ductility
Lin Jiang et al.
SCRIPTA MATERIALIA (2011)
Original mechanism of failure initiation revealed through modelling of naturally occurring microstructures
Larissa Gorbatikh et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2010)
An enhanced continuum model for size-dependent strengthening and failure of particle-reinforced composites
Yeong Sung Suh et al.
ACTA MATERIALIA (2009)
High tensile ductility and strength in bulk nanostructured nickel
Yonghao Zhao et al.
ADVANCED MATERIALS (2008)
Optimizing the strength and ductility of fine structured 2024 Al alloy by nano-precipitation
S. Cheng et al.
ACTA MATERIALIA (2007)
Simultaneously increasing the ductility and strength of nanostructured alloys
Yong-Hao Zhao et al.
ADVANCED MATERIALS (2006)
Deformation twinning in nanocrystalline aluminum
MW Chen et al.
SCIENCE (2003)
Effect of clustering on the mechanical properties of SiC particulate-reinforced aluminum alloy 2024 metal matrix composites
SJ Hong et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)
Deformation twinning in nanocrystalline Al by molecular dynamics simulation
V Yamakov et al.
ACTA MATERIALIA (2002)
Correlation between tensile and indentation behavior of particle-reinforced metal matrix composites: An experimental and numerical study
YL Shen et al.
ACTA MATERIALIA (2001)