4.7 Article

Study on Hydraulic Fracture Propagation in Hard Roof Under Abutment Pressure

Related references

Note: Only part of the references are listed.
Article Engineering, Geological

Stability Evaluation of Multi-pillar and Roof System Based on Instability Theory

Xinrong Wang et al.

Summary: Pillars are commonly used to support the roof in underground mining. The failure of pillars can be gradual or sudden, depending on the stability of the system. The stress transfer between pillars can also affect the stability of adjacent pillars. The geometric and mechanical parameters of the system play a crucial role in pillar failure. Adjusting the entry widths can help reduce the possibility of pillar unstable failure.

ROCK MECHANICS AND ROCK ENGINEERING (2022)

Article Mining & Mineral Processing

Fixed-length roof cutting with vertical hydraulic fracture based on the stress shadow effect: A case study

Feiteng Zhang et al.

Summary: Pre-driven longwall retracement roadway (PLRR) is commonly used in large mine shaft. The study concludes that the cutting of roof with vertical hydraulic fracture (HF) at a specified position, known as fixed-length roof cutting, can reduce support load and maintain the integrity of immediate roof. An innovative construction method, based on the stress shadow effect (SSE), is proposed to create vertical HF that surpasses the limitations of axial and transverse hydraulic fracturing. The method improves the stability and deformation of the main PLRR after hydraulic fracturing.

INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY (2022)

Article Engineering, Multidisciplinary

Fully coupled XFEM formulation for hydraulic fracturing simulation based on a generalized fluid leak-off model

A. Jafari et al.

Summary: A novel fully coupled hydro-mechanical model is used to assess the effect of fluid loss on the efficiency of fracturing treatment within saturated porous media. The model incorporates the formation of a cake layer, effects of filtrate, and independent pressure degrees of freedom. Numerical simulations demonstrate the framework's ability to model hydraulic fracturing in medium to low permeability formations.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2021)

Article Energy & Fuels

Directional Hydraulic Fracturing (DHF) of the Roof, as an Element of Rock Burst Prevention in the Light of Underground Observations and Numerical Modelling

Marek Jendrys et al.

Summary: This article analyzes the effectiveness of directional hydraulic fracturing (DHF) in preventing rock burst in black coal mining with a longwall system. Observations on seismic activity and numerical modeling were conducted to study the impact of DHF on rock mass behavior during coal mining.

ENERGIES (2021)

Article Energy & Fuels

An Innovative Technology for Monitoring the Distribution of Abutment Stress in Longwall Mining

Zhibiao Guo et al.

Summary: FRME method with flexible detection unit (FDU) monitoring showed a significant reduction in lateral abutment pressure in the tail entry, compared to the non-splitting head entry. Finite difference software simulation confirmed the decrease in side abutment pressure, indicating that fissures created during splitting can reduce overburden weight on solid coal, mitigating side abutment pressure.

ENERGIES (2021)

Article Engineering, Geological

Evaluation of Borehole Hydraulic Fracturing in Coal Seam Using the Microseismic Monitoring Method

Nan Li et al.

Summary: In this study, microseismic monitoring technology was used to monitor and analyze the cracks caused by borehole hydraulic fracturing in coal seam, establishing a comprehensive event detection and arrival time picking program suitable for weak microseismic signals. The results demonstrated a clear correlation between microseismic activities and hydraulic fracturing operations, showing the fracturing effect within a certain influence range of hydraulic fracturing.

ROCK MECHANICS AND ROCK ENGINEERING (2021)

Article Engineering, Geological

Simulating Hydraulic Fracture Re-orientation in Heterogeneous Rocks with an Improved Discrete Element Method

Qingyuan He et al.

Summary: Understanding the hydraulic fracture (HF) re-orientation mechanism is crucial for screen-out prevention in the petroleum industry and caveability management in the mining industry. The proposed UDEC T-W model can well simulate HF propagation in rocks of different homogeneity, and higher rock strength weakens the impact of differential stress on HF propagation. Recommendations for effective hydraulic fracturing at mine sites are provided based on the research findings.

ROCK MECHANICS AND ROCK ENGINEERING (2021)

Article Energy & Fuels

Experimental study on the effects of pre-cracks, fracturing fluid, and rock mechanical characteristics on directional hydraulic fracturing with axial pre-cracks

Zhenghe Liu et al.

Summary: The study shows that the inclination angle of pre-cracks affects the fracture initiation pressure and extension length, while a longer pre-crack length reduces the fracture initiation pressure. Additionally, increasing fracturing fluid viscosity significantly increases the crack extension length.

GEOMECHANICS AND GEOPHYSICS FOR GEO-ENERGY AND GEO-RESOURCES (2021)

Article Engineering, Geological

Verification of Coupled Hydraulic Fracturing Simulators Using Laboratory-Scale Experiments

Paromita Deb et al.

Summary: This study aims to verify the numerical predictions of hydraulic stimulation experiments by comparing controlled laboratory experiments in granite samples to simulations using CSMP and GEOS. The results show that both simulators accurately reproduced the experimental pressure behavior, emphasizing the impact of fluid-loss and unsaturated flow on fracture pressure.

ROCK MECHANICS AND ROCK ENGINEERING (2021)

Article Engineering, Geological

Stress-Energy Mechanism for Rock Failure Evolution Based on Damage Mechanics in Hard Rock

Chunlai Wang et al.

ROCK MECHANICS AND ROCK ENGINEERING (2020)

Article Engineering, Geological

Numerical simulation of proppant transport and tip screen-out in hydraulic fracturing with the extended finite element method

N. Hosseini et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2020)

Article Engineering, Geological

The position of hydraulic fracturing to initiate vertical fractures in hard hanging roof for stress relief

Jiangwei Liu et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2020)

Article Engineering, Geological

A new protective destressing technique in underground hard coal mining

Ahmet Gunes Yardimci et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2020)

Article Geochemistry & Geophysics

Distribution characteristics of the advance abutment pressure in a deep stope

Pingsong Zhang et al.

JOURNAL OF GEOPHYSICS AND ENGINEERING (2020)

Article Energy & Fuels

DEM numerical simulation study on fracture propagation of synchronous fracturing in a double fracture rock mass

Wei-min Yang et al.

GEOMECHANICS AND GEOPHYSICS FOR GEO-ENERGY AND GEO-RESOURCES (2020)

Article Engineering, Geological

Effect of frequency during cyclic hydraulic fracturing and the process of fracture development in laboratory experiments

Melvin B. Diaz et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2020)

Review Energy & Fuels

Recent comprehensive review for extended finite element method (XFEM) based on hydraulic fracturing models for unconventional hydrocarbon reservoirs

Belladonna Maulianda et al.

JOURNAL OF PETROLEUM EXPLORATION AND PRODUCTION TECHNOLOGY (2020)

Article Engineering, Geological

Study on Practice of Rockburst Accident Prevention in Multi-seam Mining Controlled by Large Fault and Hard Roof

Xianfeng Shi et al.

GEOTECHNICAL AND GEOLOGICAL ENGINEERING (2020)

Article Mining & Mineral Processing

Large-scale destress blasting for seismicity control in hard rock mines: A case study

Isaac Vennes et al.

INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY (2020)

Article Engineering, Geological

Improved algorithms for generalized finite element simulations of three-dimensional hydraulic fracture propagation

Nathan Shauer et al.

INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS (2019)

Article Engineering, Geological

Effect of Premining on Hard Roof Distress Behavior: A Case Study

Weidong Pan et al.

ROCK MECHANICS AND ROCK ENGINEERING (2019)

Proceedings Paper Mineralogy

Geophysical and geomechanical analysis of coal mass condition during directional hydraulic fracturing (DHF)

V. I. Klishin et al.

INTERNATIONAL SCIENTIFIC AND RESEARCH CONFERENCE ON KNOWLEDGE-BASED TECHNOLOGIES IN DEVELOPMENT AND UTILIZATION OF MINERAL RESOURCES (2019)

Article Energy & Fuels

Understanding mechanisms of destressing mining-induced stresses using hydraulic fracturing

Hongpu Kang et al.

INTERNATIONAL JOURNAL OF COAL GEOLOGY (2018)

Article Engineering, Geological

The reasonable breaking location of overhanging hard roof for directional hydraulic fracturing to control strong strata behaviors of gob-side entry

Bingxiang Huang et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2018)

Article Engineering, Geological

X-FEM Modeling of Multizone Hydraulic Fracturing Treatments Within Saturated Porous Media

M. Vahab et al.

ROCK MECHANICS AND ROCK ENGINEERING (2018)

Article Engineering, Geological

Study of a no-pillar mining technique with automatically formed gob-side entry retaining for longwall mining in coal mines

Qi Wang et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2018)

Proceedings Paper Automation & Control Systems

Longwall top coal caving (LTCC) mining technologies with roof softening by hydraulic fracturing method

V. Klishin et al.

XI ALL-RUSSIAN SCIENTIFIC AND PRACTICAL CONFERENCE (WITH INTERNATIONAL PARTICIPATION) AUTOMATION SYSTEMS IN EDUCATION, SCIENCE AND PRODUCTION, 2017 (2018)

Article Engineering, Geological

Effect of discontinuity stress shadows on hydraulic fracture re-orientation

Qingyuan He et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2017)

Proceedings Paper Mining & Mineral Processing

Simulating the Single- and Multi-Stage Hydraulic Fracturing: Some Insights Gleaned from Discontinuum and Continuum Modelling

H. Konietzky et al.

ISRM EUROPEAN ROCK MECHANICS SYMPOSIUM EUROCK 2017 (2017)

Article Mining & Mineral Processing

Directional hydraulic fracturing in difficult caving roof control and coal degassing

Yu. M. Lekontsev et al.

JOURNAL OF MINING SCIENCE (2014)

Article Mathematics, Applied

An extended finite element method for hydraulic fracture propagation in deformable porous media with the cohesive crack model

T. Mohammadnejad et al.

FINITE ELEMENTS IN ANALYSIS AND DESIGN (2013)

Article Materials Science, Multidisciplinary

A damage model for the simulation of delamination in advanced composites under variable-mode loading

A. Turon et al.

MECHANICS OF MATERIALS (2006)

Article Mechanics

Modeling quasi-static crack growth with the extended finite element method Part I: Computer implementation

N Sukumar et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2003)