Related references
Note: Only part of the references are listed.Effect of capillary pressure gradient in microporous layer on proton exchange membrane fuel cell performance
Jaebong Sim et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)
Effects of carbon corrosion on proton exchange membrane fuel cell performance using two durability evaluation methods
Jaebong Sim et al.
RENEWABLE ENERGY (2022)
Performance and thermal optimization of different length-width ratio for air-cooled open-cathode fuel cell
Chen Zhao et al.
RENEWABLE ENERGY (2021)
Effects of ratio variation in substrate and micro porous layer penetration on polymer exchange membrane fuel cell performance
Jaebong Sim et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)
Effects of basic gas diffusion layer components on PEMFC performance with capillary pressure gradient
Jaebong Sim et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)
Optimizing the Mass-Transfer Efficiency of a Microporous Layer for High-Performance Proton Exchange Membrane Fuel Cells
Liang Chen et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2021)
Performance improvement of air-breathing proton exchange membrane fuel cell stacks by thermal management
Wei-Mon Yan et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)
Comprehensive Anode Parameter Study for an Open-Cathode PEMFC
Chen Zhao et al.
ENERGY & FUELS (2020)
An experimental study on pressure distribution and performance of end-plate with different optimization parameters for air-cooled open-cathode LT-PEMFC
Chen Zhao et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)
Optimal design of cathode flow channel for air-cooled PEMFC with open cathode
Chen Zhao et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)
Performance enhancement of air-cooled open cathode polymer electrolyte membrane fuel cell with inserting metal foam in the cathode side
Dong Gyun Kang et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)
Performance improvement for air-cooled open-cathode proton exchange membrane fuel cell with different design parameters of the gas diffusion layer
Chen Zhao et al.
PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2020)
Optimized microporous layer for improving polymer exchange membrane fuel cell performance using orthogonal test design
Rui Lin et al.
APPLIED ENERGY (2019)
Influence of Cathode Gas Diffusion Media Porosity on Open-Cathode Fuel Cells
Robert W. Atkinson et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)
Experimental dissection of oxygen transport resistance in the components of a polymer electrolyte membrane fuel cell
Hwanyeong Oh et al.
JOURNAL OF POWER SOURCES (2017)
Optimum design of the carbon composite bipolar plate (BP) for the open cathode of an air breathing PEMFC
Minkook Kim et al.
COMPOSITE STRUCTURES (2016)
Effect of gas diffusion layer properties on water distribution across air-cooled, open-cathode polymer electrolyte fuel cells: A combined ex-situ X-ray tomography and in-operando neutron imaging study
Quentin Meyer et al.
ELECTROCHIMICA ACTA (2016)
Construction of a high-performance air-breathing cathode using platinum catalyst supported by carbon black and carbon nanotubes
Zi'ang Xiong et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)
Performance evaluation of an air-breathing high-temperature proton exchange membrane fuel cell
Qixing Wu et al.
APPLIED ENERGY (2015)
Enhanced water management in the cathode of an air-breathing PEMFC using a dual catalyst layer and optimizing the gas diffusion and microporous layers
Zi'ang Xiang et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2015)
Performance improvement of the open-cathode proton exchange membrane fuel cell by optimizing membrane electrode assemblies
Wenming Liu et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2015)
Combined current and temperature mapping in an air-cooled, open-cathode polymer electrolyte fuel cell under steady-state and dynamic conditions
Q. Meyer et al.
JOURNAL OF POWER SOURCES (2015)
A Factorial Study to Investigate the Purging Effect on the Performance of a Dead-End Anode PEM Fuel Cell Stack
A. P. Sasmito et al.
FUEL CELLS (2015)
Effect of cathode flow field configuration on air-breathing proton exchange membrane fuel cell
Woong Ki Jang et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2015)
Influence of the gas diffusion cathode structure on the performance of an air-breathing proton exchange membrane fuel cell
Paloma Ferreira-Aparicio et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2014)
Electrode structure effects on the performance of open-cathode proton exchange membrane fuel cells: A multiscale modeling approach
Stephan Strahl et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2014)
Effects of cathode channel size and operating conditions on the performance of air-blowing PEMFCs
Bosung Kim et al.
APPLIED ENERGY (2013)
The performance improvement of membrane and electrode assembly in open-cathode proton exchange membrane fuel cell
Bingbing Wu et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2013)
Characterization of MEA degradation for an open air cathode PEM fuel cell
R.A. Silva et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2012)
A review of gas diffusion layer in PEM fuel cells: Materials and designs
Sehkyu Park et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2012)
Experimental characterization methodology for the identification of voltage losses of PEMFC: Applied to an open cathode stack
A. Husar et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2012)
Experimental study of the pressure drop in the cathode side of air-forced Open-cathode proton exchange membrane fuel cells
Felix Barreras et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2011)
Theoretical model with experimental validation of a regenerative blower for hydrogen recirculation in a PEM fuel cell system
M. Badami et al.
ENERGY CONVERSION AND MANAGEMENT (2010)
Effect of cathode design on the performance of an air-breathing PEM fuel cell
P. Manoj Kumar et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2010)
The development of air-breathing proton exchange membrane fuel cell (PEMFC) with a cylindrical configuration
Kang In Lee et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2010)
Effect of cathode channel dimensions on the performance of an air-breathing PEM fuel cell
P. Manoj Kumar et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2010)
Innovative water management in micro air-breathing polymer electrolyte membrane fuel cells
Nicolas Karst et al.
JOURNAL OF POWER SOURCES (2010)
Planar air breathing PEMFC with self-humidifying MEA and open cathode geometry design for portable applications
Narissara Bussayajarn et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2009)
The formation of water droplets in an air-breathing PEMFC
Talal Ous et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2009)
Understanding cathode flooding and dry-out for water management in air breathing PEM fuel cells
Mathieu Paquin et al.
JOURNAL OF POWER SOURCES (2008)
High performance PEMFC stack with open-cathode at ambient pressure and temperature conditions
D. T. Santa Rosa et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2007)
Improvement of water management in air-breathing and air-blowing PEMFC at low temperature using hydrophilic silica nano-particles
Un Ho Jung et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2007)
Concentration and ohmic losses in free-breathing PEMFC
Luis Matamoros et al.
JOURNAL OF POWER SOURCES (2007)
Three-dimensional heat and mass transfer analysis in an air-breathing proton exchange membrane fuel cell
Ying Wang et al.
JOURNAL OF POWER SOURCES (2007)
Effect of cathode separator structure on performance characteristics of free-breathing PEMFCs
Yutaka Tabe et al.
JOURNAL OF POWER SOURCES (2006)
A study on cathode structure and water transport in air-breathing PEM fuel cells
Seong Uk Jeong et al.
JOURNAL OF POWER SOURCES (2006)
Effects of cathode open area and relative humidity on the performance of air-breathing polymer electrolyte membrane fuel cells
Seong Uk Jeong et al.
JOURNAL OF POWER SOURCES (2006)
Influence of cathode opening size and wetting properties of diffusion layers on the performance of air-breathing PEMFCs
A Schmitz et al.
JOURNAL OF POWER SOURCES (2006)
Performance of planar free-breathing PEMFC at temperatures below freezing
T Hottinen et al.
JOURNAL OF POWER SOURCES (2006)
Effects of cathode channel configurations on the performance of an air-breathing PEMFC
W Ying et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2005)
Three-dimensional modeling and experimental investigation for an air-breathing polymer electrolyte membrane fuel cell (PEMFC)
W Ying et al.
JOURNAL OF POWER SOURCES (2005)
Three-dimensional analysis for effect of channel configuration on the performance of a small air-breathing proton exchange membrane fuel cell (PEMFC)
W Ying et al.
JOURNAL OF POWER SOURCES (2005)
Modelling Approach for Planar Self-Breathing PEMFC and Comparison with Experimental Results
A. Schmitz et al.
FUEL CELLS (2004)
Effect of cathode structure on planar free-breathing PEMFC
T Hottinen et al.
JOURNAL OF POWER SOURCES (2004)
Mass transport in the cathode of a free-breathing polymer electrolyte membrane fuel cell
T Mennola et al.
JOURNAL OF APPLIED ELECTROCHEMISTRY (2003)