☆ 4.7 Article

An insight into pyrolysis and flame retardant mechanism of unsaturated polyester resin with different valance states of phosphorus structures

POLYMER DEGRADATION AND STABILITY (2022)

Related references

Note: Only part of the references are listed.

Review Engineering, Environmental

Fire-retardant unsaturated polyester thermosets: The state-of-the-art, challenges and opportunities

Seyed Mohsen Seraji et al.

Summary: The increasing demands for structural thermosets and regulations for fire safety have driven the development of high-performance eco-friendly fire-retardant thermoset polymers. There are three main approaches for creating fire-retardant UP, including intrinsically fire-retardant resins, copolymerization with reactive FRs, and hybridization with phosphorus additive FRs. Despite the advantages, challenges remain in terms of processability, curing behavior, and mechanical properties.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Engineering, Environmental

Construction of hierarchical Ti3C2TX@PHbP-PHC architecture with enhanced free-radical quenching capability: Effective reinforcement and fire safety performance in bismaleimide resin

Yifan Zhou et al.

Summary: The study shows that adding polyphosphazene and hindered amine light stabilizer to titanium carbide can improve its flame retardancy and reduce heat release rate and smoke production. Incorporating Ti3C2TX@PHbP-PHC into bismaleimide resin significantly enhances the mechanical properties and flame retardancy of the resin.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Engineering, Multidisciplinary

Constructing hierarchical structure based on LDH anchored boron-doped g-C3N4 assembled with MnO2 nanosheets towards reducing toxicants generation and fire hazard of epoxy resin

Junling Wang et al.

Summary: A hierarchical structure (MLBCN) based on LDH anchored boron-doped g-C3N4 assembled with MnO2 nanosheets was constructed as a flame retardant additive for epoxy resin. The incorporation of 1.0 wt% MLBCN led to significant decreases in heat release rate and smoke production, along with inhibited emissions of toxic gases. Additionally, MLBCN enhanced the mechanical performance of EP. Overall, using MLBCN achieved simultaneous enhancements in fire safety and mechanical capability of the polymer.

COMPOSITES PART B-ENGINEERING (2022)

Add to Collection

Article Chemistry, Physical

Exploration on structural rules of highly efficient flame retardant unsaturated polyester resins

Fukai Chu et al.

Summary: The lack of research on structure-activity relationship and interaction mechanism between unsaturated polyester resins (UPR) and flame retardants has posed challenges for developing high-efficiency flame retardants in industry. This study synthesized various polymeric flame retardants and evaluated their thermal stabilities, uncovering the interaction mechanisms and rules for improving flame retardancy of UPR composites. Key findings included the role of gaseous phase flame retardant mechanism and the effectiveness of phosphorus structures and sulfone groups in enhancing flame retardant efficiency.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

Add to Collection

Article Engineering, Multidisciplinary

Novel glycerol-based polymerized flame retardants with combined phosphorus structures for preparation of high performance unsaturated polyester resin composites

Fukai Chu et al.

Summary: Due to the ineffective flame retardant efficiency and compatibility of traditional flame retardants, it is challenging to prepare unsaturated polyester resin (UPR) composites with excellent flame retardant properties. In this research, novel glycerol-based polymeric flame retardants were synthesized and their effects on flame retardancy efficiency of UPR composites were investigated. Among the different structures, PCH(3)PG and PBPG exhibited better flame retardant efficiency, while POPG was more conducive to improving char formation at high temperatures. The polymeric glycerol-based flame retardants also showed good compatibility with the UPR matrix.

COMPOSITES PART B-ENGINEERING (2022)

Add to Collection

Article Chemistry, Physical

Functionalizing Ti3C2Tx for enhancing fire resistance and reducing toxic gases of flexible polyurethane foam composites with reinforced mechanical properties

Zhenting Yin et al.

Summary: In this study, ZIF-8@Ti3C2Tx was synthesized to reduce the heat and toxic gases of FPUF, resulting in significantly decreased peak of heat release rate (PHRR), total heat release (THR), CO and HCN emissions. The flame-retardant FPUF also exhibited improved tensile and compression strength, showcasing the superior dual metal catalytical charring-forming effect and physical barrier effect of ZIF-8@Ti3C2Tx.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

Add to Collection

Article Engineering, Environmental

Hierarchical core-shell TiO2@LDH@Ni(OH)2 architecture with regularly-oriented nanocatalyst shells: Towards improving the mechanical performance, flame retardancy and toxic smoke suppression of unsaturated polyester resin

Fukai Chu et al.

Summary: This study constructs a hierarchical core-shell TiO2-based architecture to enhance the interfacial interaction between TiO2 and UPR matrix, improving the mechanical performance of the composites. The optimization of transition metal compounds is crucial for effectively reducing fire hazards of UPR composites.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Engineering, Environmental

Functionalizing MXene towards highly stretchable, ultratough, fatigue- and fire-resistant polymer nanocomposites

Lei Liu et al.

Summary: This study introduces a hybridized fire retardant (Zr-MXene) strategy, which successfully enhances the mechanical properties of TPU nanocomposites to a record-breaking level while significantly reducing flammability.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Engineering, Environmental

Interfacial flame retardant unsaturated polyester composites with simultaneously improved fire safety and mechanical properties

Shenghe Zhang et al.

Summary: The main problems of low flame retardant efficiency and poor interfacial property in glass-fiber reinforced unsaturated resin (GUPR) composites are effectively solved by grafting modified silane coupling agent on the surface of glass fiber and adding multi-element hybrid flame retardant to matrix. By increasing the addition of flame retardant and using plasma treatment, the fire safety performance and mechanical properties of the materials are significantly improved.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Review Polymer Science

Phosphorus-containing flame retardant epoxy thermosets: Recent advances and future perspectives

Siqi Huo et al.

Summary: Phosphorus (P)-containing flame retardants have been widely used in epoxy thermosets due to their high flame retardancy efficiency, low toxicity, and impact on material properties. They are classified into reactive and additive types, and have potential for future research and development.

PROGRESS IN POLYMER SCIENCE (2021)

Add to Collection

Article Engineering, Environmental

Design of compressible flame retardant grafted porous organic polymer based separator with high fire safety and good electrochemical properties

Xiaowei Mu et al.

Summary: The study focuses on melamine-based porous organic polymers and flame retardant modified P-POP, exploring their performance and mechanism in lithium battery separators. The compressibility and fire safety performance are crucial for increasing internal resistance and preventing thermal runaway.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Thermodynamics

Multiple-distribution DAEM modelling of spruce pyrolysis: An investigation of the best trade-off regarding the number and shape of distributions

Yong Tian et al.

Summary: The study analyzed the performance of multiple-distribution DAEM models in predicting biomass pyrolysis, determining that the two-Gaussian plus one exponential distribution was the best strategy in terms of both distribution shape and number. Validation tests and DTG simulations confirmed the model's ability to accurately predict pyrolysis behaviors and the effects of heating rate.

ENERGY CONVERSION AND MANAGEMENT (2021)

Add to Collection

Article Engineering, Environmental

Barrier function of graphene for suppressing the smoke toxicity of polymer/black phosphorous nanocomposites with mechanism change

Wei Cai et al.

Summary: The use of melamine-mediated graphene/black phosphorous nanohybrids effectively suppresses the heat and smoke release behavior of polymer/BP nanocomposites, reducing the combustion performance of TPU composites significantly. Introducing such nanostructured hybrid materials can greatly improve the fire safety of polymer composites.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Fully Biobased Surface-Functionalized Microcrystalline Cellulose via Green Self-Assembly toward Fire-Retardant, Strong, and Tough Epoxy Biocomposites

Gaobo Lou et al.

Summary: The study presents a simple and green strategy for the fabrication of fully biobased flame retardants by surface-functionalizing microcrystalline cellulose with chitosan and sodium phytate via layer-by-layer assembly in water. The fully biobased flame retardants showed high efficiency and mechanical reinforcement functions when incorporated into epoxy resin composites, enhancing their fire retardancy while simultaneously strengthening and toughening the composite materials. This work provides a promising approach for the development of sustainable and multifunctional biobased flame retardants for polymers.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2021)

Add to Collection

Article Engineering, Environmental

Transparent, highly thermostable and flame retardant polycarbonate enabled by rod-like phosphorous-containing metal complex aggregates

Ting Sai et al.

Summary: By utilizing a one-step solvothermal method, new rod-like phosphorus-containing metal complex aggregates (CePn) were successfully synthesized as a flame retardant for polycarbonate, reducing peak heat release rate and total smoke release while maintaining UL-94 V-0 rating and a 27.3% limiting oxygen index. The final PC composite retains high transparency of 90.1% and comparable tensile strength, while significantly enhancing thermal stability.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Engineering, Environmental

A molecularly engineered bioderived polyphosphate for enhanced flame retardant, UV-blocking and mechanical properties of poly(lactic acid)

Yan Zhang et al.

Summary: This study reports the synthesis of a novel multifunctional bioderived polyphosphate (PPD) using plant-derived diphenolic acid for PLA, which enables PLA to achieve desirable flame retardancy and high UV protection. Adding 6wt% of PPD results in a 31% increase in impact toughness and a slight improvement in tensile strength for PLA.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Thermodynamics

The combustion and pyrolysis process of flame-retardant polystyrene/cobalt-based metal organic frameworks (MOF) nanocomposite

Zhoumei Xu et al.

Summary: The synthesis of a cobalt-based MOF-NH2 modified with PCT named PCT@MOF-NH2 significantly improves the flame retardancy and tensile strength of PS. The addition of PCT@MOF-NH2 leads to over 40% and 31% reductions in pHRR and THR values, showcasing a promising application of MOFs in enhancing flame retardation of polymer materials.

COMBUSTION AND FLAME (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Bioinspired, Highly Adhesive, Nanostructured Polymeric Coatings for Superhydrophobic Fire-Extinguishing Thermal Insulation Foam

Zhewen Ma et al.

Summary: This study presents a biomimetic strategy to design a polymeric coating with strong adhesion and flame-retardant properties, which can self-extinguish during vertical burning and release low heat and smoke, outperforming previous products.

ACS NANO (2021)

Add to Collection

Review Engineering, Multidisciplinary

A review on metal-organic hybrids as flame retardants for enhancing fire safety of polymer composites

Yanbei Hou et al.

Summary: Metal-organic flame retardants are divided into three categories: OMIFRs, MOSs, and MOFs, focusing on the combination types between organics and metallic compounds to develop efficient and polymer-compatible flame retardants.

COMPOSITES PART B-ENGINEERING (2021)

Add to Collection

Article Thermodynamics

Experimental and numerical simulation of multi-component combustion of typical charring material

Yanming Ding et al.

COMBUSTION AND FLAME (2020)

Add to Collection

Article Engineering, Multidisciplinary

One-pot scalable fabrication of an oligomeric phosphoramide towards high-performance flame retardant polylactic acid with a submicron-grained structure

Yijiao Xue et al.

COMPOSITES PART B-ENGINEERING (2020)

Add to Collection

Article Materials Science, Composites

Facile synthesis of lithium containing polyhedral oligomeric phenyl silsesquioxane and its superior performance in transparency, smoke suppression and flame retardancy of epoxy resin

Xinming Ye et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2020)

Add to Collection

Article Materials Science, Multidisciplinary

An efficient synergistic system for simultaneously enhancing the fire retardancy, moisture resistance and electrical insulation performance of unsaturated polyester resins

Lubin Liu et al.

MATERIALS & DESIGN (2020)

Add to Collection

Review Materials Science, Multidisciplinary

Flame retardant polymeric nanocomposites through the combination of nanomaterials and conventional flame retardants

Wentao He et al.

PROGRESS IN MATERIALS SCIENCE (2020)

Add to Collection

Article Engineering, Multidisciplinary

Renewable vanillin-based flame retardant toughening agent with ultra-low phosphorus loading for the fabrication of high-performance epoxy thermoset

Fukai Chu et al.

COMPOSITES PART B-ENGINEERING (2020)

Add to Collection

Review Engineering, Multidisciplinary

The rise of MOFs and their derivatives for flame retardant polymeric materials: A critical review

Ye-Tang Pan et al.

COMPOSITES PART B-ENGINEERING (2020)

Add to Collection

Article Thermodynamics

The effect of chemical composition on the charring of wood across scales

Franz Richter et al.

PROCEEDINGS OF THE COMBUSTION INSTITUTE (2019)

Add to Collection

Article Polymer Science

Modified montmorillonite combined with intumescent flame retardants on the flame retardancy and thermal stability properties of unsaturated polyester resins

Yuan Yu et al.

POLYMERS FOR ADVANCED TECHNOLOGIES (2019)

Add to Collection

Article Construction & Building Technology

Facile preparation of slag or fly ash geopolymer composite coatings with flame resistance

YaChao Wang et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Add to Collection

Article Polymer Science

Preparation of highly efficient flame retardant unsaturated polyester resin by exerting the fire resistant effect in gaseous and condensed phase simultaneously

Jingshang Zhou et al.

POLYMERS FOR ADVANCED TECHNOLOGIES (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Hierarchical Structure: An effective Strategy to Enhance the Mechanical Performance and Fire Safety of Unsaturated Polyester Resin

Fukai Chu et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Polymer Science

Synthesis of a DOPO-containing imidazole curing agent and its application in reactive flame retarded epoxy resin

Siqi Huo et al.

POLYMER DEGRADATION AND STABILITY (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Construction of Bimetallic ZIF-Derived Co-Ni LDHs on the Surfaces of GO or CNTs with a Recyclable Method: Toward Reduced Toxicity of Gaseous Thermal Decomposition Products of Unsaturated Polyester Resin

Yanbei Hou et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection

Article Engineering, Environmental

Highly thermostable and durably flame-retardant unsaturated polyester modified by a novel polymeric flame retardant containing Schiff base and spirocyclic structures

Dan Zhao et al.

CHEMICAL ENGINEERING JOURNAL (2018)

Add to Collection

Article Engineering, Manufacturing

Constructing phosphorus, nitrogen, silicon-co-contained boron nitride nanosheets to reinforce flame retardant properties of unsaturated polyester resin

Dong Wang et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)

Add to Collection

Article Thermodynamics

Fire reaction properties of polystyrene-based nanocomposites using nanosilica and nanoclay as additives in cone calorimeter test

Lubna Ahmed et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2018)

Add to Collection

Article Engineering, Civil

A review of physics and correlations of pool fire behaviour in wind and future challenges

Longhua Hu

FIRE SAFETY JOURNAL (2017)

Add to Collection

Article Engineering, Chemical

Preparation of Metal-Organic Frameworks and Their Application as Flame Retardants for Polystyrene

Yanbei Hou et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2017)

Add to Collection

Article Engineering, Environmental

Effect of cuprous oxide with different sizes on thermal and combustion behaviors of unsaturated polyester resin

Yanbei Hou et al.

JOURNAL OF HAZARDOUS MATERIALS (2017)

Add to Collection

Article Engineering, Environmental

A facile strategy to simultaneously exfoliate and functionalize boron nitride nanosheets via Lewis acid-base interaction

Wei Cai et al.

CHEMICAL ENGINEERING JOURNAL (2017)

Add to Collection

Article Engineering, Environmental

In situ loading ultra-small Cu2O nanoparticles on 2D hierarchical TiO2-graphene oxide dual-nanosheets: Towards reducing fire hazards of unsaturated polyester resin

Dong Wang et al.

JOURNAL OF HAZARDOUS MATERIALS (2016)

Add to Collection

Article Engineering, Chemical

Microencapsulated Ammonium Polyphosphate with Glycidyl Methacrylate Shell: Application to Flame Retardant Epoxy Resin

Qinbo Tang et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2013)

Add to Collection

Review Chemistry, Applied

A new intumescent flame retardant containing phosphorus and nitrogen: Preparation, thermal properties and application to UV curable coating

Lijuan Chen et al.

PROGRESS IN ORGANIC COATINGS (2011)

Add to Collection

Article Materials Science, Multidisciplinary

Flame retardant finishing of cotton fleece fabric: Part V. Phosphorus-containing maleic acid oligomers

Xinying Cheng et al.

FIRE AND MATERIALS (2009)

Add to Collection

Article Polymer Science

Microencapsulation of ammonium polyphosphate with PVA-melamine-formaldehyde resin and its flame retardance in polypropylene

Kun Wu et al.

POLYMERS FOR ADVANCED TECHNOLOGIES (2008)

Add to Collection

Article Polymer Science

Influence of the oxidation state of phosphorus on the decomposition and fire behaviour of flame-retarded epoxy resin composites

Ulrike Braun et al.

POLYMER (2006)

Add to Collection

Article Polymer Science

Re-examination of the thermal oxidation reactions of polymers - 2. Thermal oxidation of polyethylene

F Gugumus

POLYMER DEGRADATION AND STABILITY (2002)

Add to Collection

© Peeref 2019-2024. All rights reserved.