☆ 4.7 Article

Mechanical and thermal properties of synergistic modification of bismaleimide polymer composites with nano-SiO2 and hyperbranched polyimide

POLYMER COMPOSITES (2022)

Related references

Note: Only part of the references are listed.

Article Materials Science, Composites

Effects of particle size of hydroxyapatite on mechanical property and cytocompatibility of hydroxyapatite/poly(amino acid) composites

Defu Lyu et al.

Summary: Three different particle sizes of hydroxyapatites were synthesized and combined with poly(amino acid) to form composites. Mechanical tests showed that particle size played a significant role in the mechanical performance of the composites, with nano-scale long rod HA showing the highest enhancement. Cell culture results demonstrated that all composites exhibited good cytocompatibility.

POLYMER COMPOSITES (2022)

Add to Collection

Article Chemistry, Applied

High toughness, thermal resistance and excellent dielectric properties phenolic epoxy vinyl ester resin modified by hyperbranched polyimide

Feng Gao et al.

Summary: This study investigated the modification of phenolic epoxy vinyl ester resin (PEVER) with hyperbranched polyimide (HBPI) and its impact on the resin properties. The results showed that the addition of HBPI enhanced the toughness and thermal stability of PEVER, while decreasing the dielectric constant and dielectric loss.

PIGMENT & RESIN TECHNOLOGY (2022)

Add to Collection

Article Polymer Science

Bio-based hydroxymethylated eugenol modified bismaleimide resin and its high-temperature composites

Yi Ning et al.

Summary: MEG and PMEG were synthesized to modify BMI resins, and the cured MEG-BMI resins showed good thermal stability and high carbon content. As a new candidate high temperature thermosetting resin, MEG has promising applications in advanced composite matrices.

JOURNAL OF APPLIED POLYMER SCIENCE (2021)

Add to Collection

Article Polymer Science

Improved Mechanical and Tribological Properties of Bismaleimides Resins by Surface-Functionalized Molybdenum Disulfide

Changhu Zhang et al.

Summary: The addition of suitable amount of NH2-MoS2 substantially improved the mechanical properties of BMI resins, reduced the frictional coefficient and wear rate, and transformed the wear mechanism from adhesive wear to abrasive wear. Furthermore, the BMI composite with 5 wt% NH2-MoS2 exhibited better thermotolerance, inhibiting adhesive wear effectively during wear.

JOURNAL OF INORGANIC AND ORGANOMETALLIC POLYMERS AND MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Tribological properties of graphene-modified with ionic liquids and carbon quantum dots/ bismaleimide composites

Chao Liu et al.

Summary: By depositing ionic liquids and carbon quantum dots on the surface of graphene, the tribological properties of polymer composites can be improved, leading to a decrease in friction coefficient and volume wear rate of BMI materials.

CARBON (2021)

Add to Collection

Article Engineering, Manufacturing

Synthesis of a coupling agent containing polyurethane chain and its influence on improving the dispersion of SiO2 nanoparticles in epoxy/amine thermoset

Yuhuan Yuan et al.

Summary: Grafting the polyurethane chain onto the surface of SiO2 nanoparticles is an effective method to achieve uniform dispersion of the nanoparticles in the resin matrix, improving both dispersion and mechanical properties of the composite material.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)

Add to Collection

Article Polymer Science

Silica solid particles toughening, strengthening and anti-aging on epoxy resin

Jie Ai et al.

Summary: In this study, SiO2 particles of different sizes were prepared and modified by TETA, used to toughen epoxy resin. Both SiO2 and SiO2-TETA particles show obvious strengthening effects on EP, with SiO2-TETA demonstrating better cross-linking effect. The particle size has an impact on the toughening effect, with 100 nm SiO2 particles showing better performance.

JOURNAL OF APPLIED POLYMER SCIENCE (2021)

Add to Collection

Article Materials Science, Composites

Evaluation of the morphological, rheological, dynamic mechanical and mechanical characteristics of compatibilized graphene oxide/poly(ethylene terephthalate)/poly(butylene terephthalate) nanocomposites

Bedriye Ucpinar Durmaz et al.

Summary: The study evaluated the effectiveness of GO as reinforcement material and Joncryl as a compatibilizing agent for PET/PBT blends, finding that Joncryl improved mechanical properties while the addition of GO weakened interfacial adhesion.

POLYMER COMPOSITES (2021)

Add to Collection

Article Materials Science, Composites

Hybridization as an efficient strategy for enhancing the performance of polymer nanocomposites

Ali Tajdari et al.

Summary: This study aimed to compare the effects of different modes of metal oxide addition on the properties of poly(lactic acid) (PLA), synthesizing zinc oxide nanorods and hybrid nanoparticles and incorporating them into PLA matrices. The results showed that proper dispersion and lowest aggregation were achieved with the TZO nano-hybrid, leading to improved physical, mechanical, and antibacterial properties of PLA. This novel nanocomposite film has potential applications in the packaging industry.

POLYMER COMPOSITES (2021)

Add to Collection

Article Materials Science, Composites

Toughening mechanism of PP/EPR/SiO2 composites with superior low-temperature toughness

Shunjie Zhao et al.

Summary: This study investigated the toughening mechanism of iPP/EPR/SiO2 composites at low temperatures. It was found that the synergistic regulation of T-bd by EPR and SiO2, as well as the increase in silica content, could effectively enhance the low-temperature toughness of the composites. Additionally, the proposed toughening mechanism involved the increased internal friction loss induced by the expanded phase interfacial area between EPR and iPP matrix, leading to high-elastic deformation and ductile fracture behavior in the composite at low temperatures.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

Add to Collection

Article Chemistry, Physical

Exceptional Mechanical Properties and Heat Resistance of Photocurable Bismaleimide Ink for 3D Printing

Wenqiang Hua et al.

Summary: A photocurable bismaleimide ink with excellent comprehensive performance for stereolithography (SLA) 3D printing was developed in this study, showing improved mechanical properties and heat resistance compared to commercial inks.

MATERIALS (2021)

Add to Collection

Article Materials Science, Composites

Influence of multiwalled carbon nanotubes on the structure and properties of poly(ethylene-co-vinyl acetate-co-carbon monoxide) nanocomposites

Gibin George et al.

Summary: The study involved creating composites of EVACO and surface-modified MWCNTs using a solution casting technique, with acid treatment enhancing compatibility. The addition of minute quantities of m-MWCNTs significantly improved mechanical properties and thermal stability of the composites, but did not drastically alter electrical conductivity due to filler loading remaining below a threshold level.

POLYMER COMPOSITES (2021)

Add to Collection

Article Polymer Science

Microstructure, mechanical properties and heat-resistance properties of bismaleimide composites modified synergistically by alumina and two kinds of thermoplastic resins

Yufei Chen et al.

Summary: The Al2O3-PES-SPEEK/MBAE composite material shows significantly improved mechanical and heat-resistant properties, with better fracture surface morphology and ductile fracture characteristics.

HIGH PERFORMANCE POLYMERS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Cure Behavior Changes and Compression of Carbon Nanotubes in Aerospace Grade Bismaleimide-Carbon Nanotube Sheet Nanocomposites

Mohammad Hamza Kirmani et al.

Summary: The study examines the effects of carbon nanotubes (CNTs) on the curing of bismaleimide resin matrix (BMI) and vice versa in nanocomposites with up to 40 wt % CNTs. The addition of CNTs has significant impact on the cure temperature and glass transition temperature of BMI, with varying effects depending on the CNT content. The findings highlight the importance of optimizing the cure conditions for each CNT-BMI system to achieve the best mechanical properties.

ACS APPLIED NANO MATERIALS (2021)

Add to Collection

Article Materials Science, Composites

Effect of ceria nanoparticles on mechanical properties, thermal and dielectric properties of poly (butyl methacrylate) nanocomposites

K. Suhailath et al.

POLYMER COMPOSITES (2020)

Add to Collection

Article Chemistry, Physical

Enhancement of Thermal and Mechanical Properties of Bismaleimide Using a Graphene Oxide Modified by Epoxy Silane

Hao Jiang et al.

MATERIALS (2020)

Add to Collection

Article Materials Science, Composites

Study on the surface morphology and wettability of nanocomposite films based on poly(methyl methacrylate) containing polyhedral oligomeric silsesquioxane/silica nanohybrids

Toktam Kargar Abjahan et al.

POLYMER COMPOSITES (2019)

Add to Collection

Article Chemistry, Physical

Fabrication of thermally robust carbon nanotube (CNT)/SiO2 composite films and their high-temperature mechanical properties

Jingyu He et al.

CARBON (2019)

Add to Collection

Article Materials Science, Composites

Achieving highly electrical conductivity and piezoresistive sensitivity in polydimethylsiloxane/multi-walled carbon nanotube composites via the incorporation of silicon dioxide micro-particles

Yi-Fu Chen et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2019)

Add to Collection

Article Materials Science, Multidisciplinary

3D Printing of Bismaleimides: From New Ink Formulation to Printed Thermosetting Polymer Objects

Irina Gouzman et al.

ADVANCED MATERIALS TECHNOLOGIES (2019)

Add to Collection

Article Materials Science, Composites

Synthesis of epoxy-ended hyperbranched polyesters with reinforcing and toughening function for diglycidyl ether of bisphenol-A

Luping Wang et al.

POLYMER COMPOSITES (2018)

Add to Collection

Article Materials Science, Composites

Nanomechanical and nanoscratch performance of polystyrene/poly(methyl methacrylate)/multi-walled carbon nanotubes nanocomposite coating

Abdolhosein Fereidoon et al.

POLYMER COMPOSITES (2018)

Add to Collection

Review Polymer Science

Modern advances in bismaleimide resin technology: A 21st century perspective on the chemistry of addition polyimides

Robert J. Iredale et al.

PROGRESS IN POLYMER SCIENCE (2017)

Add to Collection

Article Polymer Science

Enhancement of Thermal Diffusivity in Phase-Separated Bismaleimide/Poly(ether imide) Composite Films Containing Needle-Shaped ZnO Particles

Shoya Uchida et al.

POLYMERS (2017)

Add to Collection

Article Chemistry, Physical

Enhanced tribological properties of aligned reduced graphene oxide-Fe3O4@polyphosphazene/bismaleimides composites

Chao Liu et al.

CARBON (2016)

Add to Collection

Article Polymer Science

Fatigue crack propagation behaviour of epoxy resins modified with silica-nanoparticles

M. H. Kothmann et al.

POLYMER (2015)

Add to Collection

Article Chemistry, Applied

Bio-based thermosetting bismaleimide resins using cardany linolenate and allyl cardanyl ether

Yoshiki Hannoda et al.

REACTIVE & FUNCTIONAL POLYMERS (2015)

Add to Collection

Article Chemistry, Physical

Hyperbranched polyether as an all-purpose epoxy modifier: controlled synthesis and toughening mechanisms

Tuan Liu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2015)

Add to Collection

Article Chemistry, Physical

Enhanced tribological properties of bismaleimides filled with aligned graphene nanosheets coated with Fe3O4 nanorods

Chao Liu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2015)

Add to Collection

Article Materials Science, Composites

Improving mechanical properties of fiber-reinforced composites based on epoxy resins containing industrial surface-modified silica nanoparticles: review and outlook

Stephan Sprenger

JOURNAL OF COMPOSITE MATERIALS (2015)

Add to Collection

Article Thermodynamics

Polymerization kinetics of reactive N,N′-bismaleimide-4,4′-diphenylmethane/barbituric acid based microgel particles

Quoc-Thai Pham et al.

THERMOCHIMICA ACTA (2014)

Add to Collection

Article Polymer Science

Preparation and properties of modified bismaleimide resins based on phthalide-containing monomer

Xuhai Xiong et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2013)

Add to Collection

Article Engineering, Chemical

Design, Synthesis, and Characterization of Bismaleimide Co-Curing Elastomers

Karthik Vikram Siva Shanmugam et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2012)

Add to Collection

Article Polymer Science

High-performance polymer alloys of polybenzoxazine and bismaleimide

Tsutomu Takeichi et al.

POLYMER (2008)

Add to Collection

Article Materials Science, Composites

A novel method of hyperbranched poly(amide-ester) modifying nano-SiO2 and study of mechanical properties of PVC/nano-SiO2 composites

Hui Zhao et al.

POLYMER COMPOSITES (2008)

Add to Collection

Article Materials Science, Composites

Preparation and properties of polyimide/Silica hybrid nanocomposites

J. C. Tang et al.

POLYMER COMPOSITES (2007)

Add to Collection

© Peeref 2019-2024. All rights reserved.