☆ 4.7 Article

Areca/synthetic fibers reinforced based epoxy hybrid composites for semi-structural applications

POLYMER COMPOSITES (2022)

Related references

Note: Only part of the references are listed.

Article Materials Science, Textiles

An Experimental Study of Physical, Mechanical and Morphological Properties of Alkali Treated Moringa/areca Based Natural Fiber Hybrid Composites

Subhakanta Nayak et al.

Summary: In this study, PET composites reinforced with areca sheath and Moringa oleifera fruit fibers were fabricated using injection molding technique. Comparative analysis of the physical and mechanical properties of the different composite samples was conducted, including void percentage, micro-hardness, impact, flexural and tensile strength. SEM and TGA were used to analyze the surface texture and thermal properties. The results revealed that the MF composites had higher tensile and flexural properties, while the AM composites showed better micro-hardness and impact strength. SEM micrographs showcased improved fiber-matrix bonding in MF composites, indicating enhanced thermal degradation resistance. Consequently, these fiber-reinforced PET composites can be potentially utilized as alternative materials for lightly to moderately loaded structural engineering applications.

JOURNAL OF NATURAL FIBERS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of carbon/kevlar reinforcement and hybrid order on mechanical properties of glass/epoxy composites

D. Saravanan et al.

Summary: The focus of material development research is on materials with high strength to weight ratio to replace conventional high-density materials. This study examined the mechanical properties of epoxy laminates made from different reinforcements and their hybrid configurations, with carbon epoxy laminates showing the highest tensile strength and kevlar epoxy laminates showing the highest impact strength. Hybridization, particularly sandwich hybrids, is noted to improve properties of the composites.

ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES (2022)

Add to Collection

Editorial Material Materials Science, Composites

Editorial

Constantinos Soutis et al.

APPLIED COMPOSITE MATERIALS (2022)

Add to Collection

Article Materials Science, Composites

Properties of organic and inorganic filler hybridization on Timoho Fiber-reinforced polyester polymer composites

Femiana Gapsari et al.

Summary: The study focused on improving the performance of TF-reinforced polyester composites by adding organic and inorganic fillers. It was found that aluminum powder (AP) was more effective in increasing density than egg shell powder (ESP), and the tensile and impact strength of the composite increased with higher TF volume. However, the addition of ESP and AP fillers caused changes in mechanical characteristics, increasing elasticity modulus and toughness while decreasing tensile strength. Additionally, SEM observation supported the analysis of TF-polyester composite mechanical characteristics.

POLYMER COMPOSITES (2022)

Add to Collection

Article Materials Science, Textiles

Influence of Stacking Sequence and Fiber Content on the Mechanical Properties of Natural and Synthetic Fibers Reinforced Penta-Layered Hybrid Composites

V Mohanavel et al.

Summary: This study investigates the influence of fiber content, stacking pattern, and sequence on the mechanical properties of hybrid composites. It was found that the presence of glass fiber mats during the stacking process has a significant effect on the mechanical properties of the composites. The results showed changes in strength and toughness depending on the composition and arrangement of fibers in the composites.

JOURNAL OF NATURAL FIBERS (2022)

Add to Collection

Article Materials Science, Textiles

The Effects of Stacking Sequence on the Mechanical and Water Absorption Properties of Areca-Pineapple Fiber-based Epoxy Composites

Vijay Raghunathan et al.

Summary: The study focuses on developing hybrid Areca-Pineapple fiber epoxy composites with different stacking sequences, evaluating their mechanical and water absorption properties. Pineapple fiber-based composites showed higher strength, while Areca fiber-based composites exhibited better water absorption properties.

JOURNAL OF NATURAL FIBERS (2022)

Add to Collection

Article Materials Science, Textiles

Characterization of Natural Cellulosic Fiber from Cocos nucifera Peduncle for Sustainable Biocomposites

Brailson Mansingh Bright et al.

Summary: Coconut tree peduncle fiber (CTPF) possesses high single fiber tensile strength, large crystalline size, and semi-crystalline nature, low density and water absorption properties, as well as promoting better bonding with the matrix, making it suitable for use as a bio-reinforcement in polymer composites.

JOURNAL OF NATURAL FIBERS (2022)

Add to Collection

Review Materials Science, Textiles

A comprehensive review on the effect of synthetic filler materials on fiber-reinforced hybrid polymer composites

J. Praveenkumara et al.

Summary: Researchers are currently focused on developing materials that are lightweight, manufacturable, durable, and cost-effective. They are utilizing hybridization and synthetic fillers to enhance the performance and efficiency of polymer composites.

JOURNAL OF THE TEXTILE INSTITUTE (2022)

Add to Collection

Article Materials Science, Composites

Influence of calcium carbonate fillers on pine fiber reinforced polyester composites

Femiana Gapsari et al.

Summary: This study analyzed the influence of calcium carbonate filler loadings on the properties of pine fiber reinforced polyester composites. The results showed that the fillers improved the physical, mechanical, thermal, and morphological properties of the composites. The fillers enhanced the strength, hardness, and thermal resistance of the composites through filling air gaps and enhancing interfacial bonding.

POLYMER COMPOSITES (2022)

Add to Collection

Article Materials Science, Composites

Comparative evaluation of areca/carbon/basalt fiber reinforced epoxy/bio epoxy based hybrid composites

T. G. Yashas Gowda et al.

Summary: This study developed hybrid areca/carbon/basalt reinforced epoxy/bio epoxy composites and investigated their mechanical, thermal, and water absorption behavior. The carbon-areca fiber reinforced composites showed the best mechanical properties and exhibited better bonding between areca, carbon, and basalt fabrics.

POLYMER COMPOSITES (2022)

Add to Collection

Article Materials Science, Textiles

Study on Mechanical and Tribological Characteristics of Epoxy Composites Reinforced with Short Areca-catechu Fibers

Purushottam Kumar Choudhary et al.

Summary: This study investigates the impact of different fiber loadings on the dry-sliding wear behavior of natural fiber reinforced polymer composites. The results show that the addition of short areca-catechu fibers significantly improves the wear resistance of the composites. An optimum fiber content is determined for the lowest wear rate. Additionally, a predictive equation is proposed to estimate the specific wear rate of the composites under varied test conditions, which shows good agreement with experimental results.

JOURNAL OF NATURAL FIBERS (2022)

Add to Collection

Article Materials Science, Textiles

Effect of Layering Sequence on Impact Properties of Alkali Treated Phoenix Pusilla Fibers-Glass-Carbon Fabrics Reinforced Hybrid Composite Laminates

Madhu Puttegowda et al.

Summary: This study evaluates the effect of stacking sequence on the impact properties of polymer hybrid composites, finding that hybrid composites with carbon as outer layers exhibit improved performance. The research also conducted scanning electron microscopy investigation on fractured specimens.

JOURNAL OF NATURAL FIBERS (2022)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Morphological and mechanical properties of short fibres reinforced hybrid composites for automotive applications

K. Dilip Kumar et al.

Summary: In this study, hybrid fibre reinforced epoxy composites were fabricated and tested to improve their mechanical properties for various applications. The samples prepared with different combinations of fibres exhibited the best mechanical properties, but the variation in fibre content significantly affected the mechanical properties.

MATERIALS TODAY-PROCEEDINGS (2022)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Experimental investigation on the mechanical properties of Carbon/Kevlar fibre reinforced epoxy LY556 composites

K. Karthik et al.

Summary: The objective of this research is to identify the unique properties of composites when different reinforcement fibers are used. By evaluating the mechanical properties of hybrid epoxy composites, the study reveals that hybrid composites have a higher strength-to-weight ratio in engineering applications.

MATERIALS TODAY-PROCEEDINGS (2022)

Add to Collection

Article Engineering, Multidisciplinary

Investigation of the mechanical properties of carbon and basalt fiber laminated hybrid epoxy composites

Mehmet Iskender Ozsoy

Summary: This study investigated the mechanical properties of carbon fiber and basalt fiber composites, and achieved the goal of improving the impact performance of the composites through hybridization technology.

PAMUKKALE UNIVERSITY JOURNAL OF ENGINEERING SCIENCES-PAMUKKALE UNIVERSITESI MUHENDISLIK BILIMLERI DERGISI (2022)

Add to Collection

Article Materials Science, Textiles

The Effects of Stacking Sequence on the Tensile and Flexural Properties of Kenaf/Jute Fibre Hybrid Composites

T. Khan et al.

Summary: This study analyzed the effects of stacking sequence of kenaf and jute fibers on hybrid composites, showing that K/J/K composites exhibited higher tensile and flexural properties with better fiber/matrix interfacial bonding compared to J/K/J composites. The layering sequence plays an important role in the mechanical performance of hybrid composites for potential engineering applications like aircraft interiors.

JOURNAL OF NATURAL FIBERS (2021)

Add to Collection

Article Materials Science, Composites

A new study on flax-basalt-carbon fiber reinforced epoxy/bioepoxy hybrid composites

Yashas T. G. Gowda et al.

Summary: The present research investigates the development and performance of flax-basalt-carbon fiber reinforced epoxy/bioepoxy hybrid composites under different stacking sequence techniques. Through various mechanical experiments, it was demonstrated that these composites are suitable for structural applications with medium load in engineering fields.

POLYMER COMPOSITES (2021)

Add to Collection

Article Engineering, Chemical

Effects of Hydrothermal Seawater Aging on the Mechanical Properties and Water Absorption of Glass/Aramid/Epoxy Hybrid Composites

Z. A. Oguz et al.

Summary: The experimental investigation on the effect of seawater aging on the mechanical properties of composite materials showed that as temperature increases, water absorption ratio increases leading to a decrease in flexural strength. The performance of the re-dried test groups was better than that of the wet state test samples.

INTERNATIONAL POLYMER PROCESSING (2021)

Add to Collection

Article Polymer Science

The Effect of Stacking Sequence and Ply Orientation on the Mechanical Properties of Pineapple Leaf Fibre (PALF)/Carbon Hybrid Laminate Composites

Mohd Khairul Rabani Hashim et al.

Summary: The study investigated the effects of stacking sequence and ply orientation on the mechanical properties of PALF/carbon hybrid laminate composites. Different laminate configurations led to varied tensile and flexural performance, with the highest strengths and moduli observed in specific configurations. Failure analysis revealed that failure typically initiated at the weakest PALF layer, with various failure modes observed.

POLYMERS (2021)

Add to Collection

Article Materials Science, Composites

Pongamia pinnata shell powder filled sisal/kevlar hybrid composites: Physicomechanical and morphological characteristics

Praveenkumara Jagadeesh et al.

Summary: The study focused on incorporating sisal and kevlar woven fabrics with an epoxy matrix and investigating the impact of Pongamia pinnata shell powder on the sisal/kevlar hybrid composite. Results showed that increasing filler content led to a decrease in void percentage, with the addition of kevlar fabric significantly improving the impact strength, tensile strength, and tensile modulus. The composition of the natural fiber reinforced polymer materials played a crucial role in determining the mechanical properties of the composites.

POLYMER COMPOSITES (2021)

Add to Collection

Article Materials Science, Composites

Characterization of chemically treated new natural cellulosic fibers from peduncle of Cocos nucifera L. Var typica

Brailson Mansingh Bright et al.

Summary: The study found that fibers treated with 0.5% potassium permanganate showed the highest cellulose content and improved mechanical properties, making them suitable as bio-reinforcement in high performance polymer composites.

POLYMER COMPOSITES (2021)

Add to Collection

Article Materials Science, Composites

Mechanical, microstructural, and thermal characterization insights of pyrolyzed carbon black from waste tires reinforced epoxy nanocomposites for coating application

Akarsh Verma et al.

POLYMER COMPOSITES (2020)

Add to Collection

Article Construction & Building Technology

Accelerated weathering studies of kenaf/sisal fiber fabric reinforced fully biobased hybrid bioepoxy composites for semi-structural applications: Morphology, thermo-mechanical, water absorption behavior and surface hydrophobicity

Krittirash Yorseng et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Article Mechanics

The tensile properties and interlaminar shear strength of microcapsules-glass fibers/epoxy self-healable composites

Hossein Ebrahimnezhad-Khaljiri et al.

ENGINEERING FRACTURE MECHANICS (2020)

Add to Collection

Article Materials Science, Textiles

Investigation on the mechanical behavior of areca sheath fibers/jute fibers/glass fabrics reinforced hybrid composite for light weight applications

S. Jothibasu et al.

JOURNAL OF INDUSTRIAL TEXTILES (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Effects of Date Palm fibres loading on mechanical, and thermal properties of Date Palm reinforced phenolic composites

Mohammad Asim et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

Add to Collection

Article Geochemistry & Geophysics

Effect of Basalt Fibers for Reinforcing Resin-Based Brake Composites

Xiaoguang Zhao et al.

MINERALS (2020)

Add to Collection

Article Materials Science, Composites

Preparation and characterization of new hybrid polymer composites fromPhoenix pusillafibers/E-glass/carbon fabrics on potential engineering applications: Effect of stacking sequence

Madhu Puttegowda et al.

POLYMER COMPOSITES (2020)

Add to Collection

Article Materials Science, Composites

Experimental investigation on the mechanical and morphological behavior ofProsopis juliflorabark fibers/E-glass/carbon fabrics reinforced hybrid polymeric composites for structural applications

Puttegowda Madhu et al.

POLYMER COMPOSITES (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Differences in microstructure and nano-hardness of selective laser melted Inconel 718 single tracks under various melting modes of molten pool

Hongying Wang et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Physical and thermal behaviour of areca and coconut shell powder reinforced epoxy composites

G. Kishore Chowdari et al.

MATERIALS TODAY-PROCEEDINGS (2020)

Add to Collection

Article Engineering, Multidisciplinary

Improvement of mechanical properties of hybrid composites through interply rearrangement of glass and carbon woven fabrics for marine application

Dipak Kumar Jesthi et al.

COMPOSITES PART B-ENGINEERING (2019)

Add to Collection

Article Mechanics

Effect of hybridization on the impact properties of flax/basalt epoxy composites: Influence of the stacking sequence

M. R. Ricciardi et al.

COMPOSITE STRUCTURES (2019)

Add to Collection

Article Mechanics

Thermal degradation and viscoelastic properties of Kevlar/Cocos nucifera sheath reinforced epoxy hybrid composites

J. Naveen et al.

COMPOSITE STRUCTURES (2019)

Add to Collection

Article Engineering, Chemical

Processing and characterization analysis of pyrolyzed oil rubber (from waste tires)-epoxy polymer blend composite for lightweight structures and coatings applications

Akarsh Verma et al.

POLYMER ENGINEERING AND SCIENCE (2019)

Add to Collection

Article Engineering, Civil

Flexural performance and cost efficiency of carbon/basalt/glass hybrid FRP composite laminates

Dongdong Chen et al.

THIN-WALLED STRUCTURES (2019)

Add to Collection

Review Polymer Science

Review on Hybrid Carbon/Flax Composites and Their Properties

Madina Shamsuyeva et al.

INTERNATIONAL JOURNAL OF POLYMER SCIENCE (2019)

Add to Collection

Review Materials Science, Multidisciplinary

Natural Fibers as Sustainable and Renewable Resource for Development of Eco-Friendly Composites: A Comprehensive Review

Yashas Gowda Thyavihalli Girijappa et al.

FRONTIERS IN MATERIALS (2019)

Add to Collection

Proceedings Paper Engineering, Manufacturing

Mechanical Properties of Flax Fiber Reinforced Composites Manufactured Using Hand Layup and Compression Molding-A Comparison

Vishnu Prasad et al.

ADVANCES IN INDUSTRIAL AND PRODUCTION ENGINEERING (2019)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Mechanical Characterization of Areca husk-Coir fiber reinforced hybrid Composites

N. H. Padmaraj et al.

MATERIALS TODAY-PROCEEDINGS (2018)

Add to Collection

Article Polymer Science

Optimization of short Indian Areca fruit husk fiber (Areca catechu L.)-reinforced polymer composites for maximizing mechanical properties

J. S. Binoj et al.

INTERNATIONAL JOURNAL OF POLYMER ANALYSIS AND CHARACTERIZATION (2016)

Add to Collection

Article Materials Science, Characterization & Testing

Tailoring of interface of polypropylene/polystyrene/carbon nanofibre composites by polystyrene-block-poly(ethylene-ran-butylene)-block-polystyrene

Jyotishkumar Parameswaranpillai et al.

POLYMER TESTING (2016)

Add to Collection

Article Engineering, Multidisciplinary

Effect of fibre orientations on the mechanical properties of kenaf-aramid hybrid composites for spall-liner application

R. Yahaya et al.

DEFENCE TECHNOLOGY (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Chemical resistance, void content and tensile properties of oil palm/jute fibre reinforced polymer hybrid composites

M. Jawaid et al.

MATERIALS & DESIGN (2011)

Add to Collection

© Peeref 2019-2024. All rights reserved.