Related references
Note: Only part of the references are listed.Progress in interlaminar toughening of aerospace polymer composites using particles and non-woven veils
O. Inal et al.
AERONAUTICAL JOURNAL (2022)
Interlaminar toughening of unidirectional CFRP with multilayers graphene and MWCNTs for Mode II fracture
Bin Liu et al.
COMPOSITE STRUCTURES (2020)
Fracture behaviour of carbon fibre/epoxy composites interleaved by MWCNT- and graphene nanoplatelet-doped thermoplastic veils
Dong Quan et al.
COMPOSITE STRUCTURES (2020)
Interleaving light veils to minimise the trade-off between mode-I interlaminar fracture toughness and in-plane properties
S. M. Garcia-Rodriguez et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)
Improved Interlaminar Fracture Toughness and Electrical Conductivity of CFRPs with Non-Woven Carbon Tissue Interleaves Composed of Fibers with Different Lengths
Feng Xu et al.
POLYMERS (2020)
The influence of interlayer/epoxy adhesion on the mode-I and mode-II fracture response of carbon fibre/epoxy composites interleaved with thermoplastic veils
Dong Quan et al.
MATERIALS & DESIGN (2020)
Interlaminar fracture toughness of CFRPs interleaved with stainless steel fibres
Dong Quan et al.
COMPOSITE STRUCTURES (2019)
Intra-laminar toughening mechanisms to enhance impact damage tolerance of 2D woven composite laminates via yarn-level fiber hybridization and fiber architecture
Hussein Dalfi et al.
POLYMER COMPOSITES (2019)
Interlaminar toughening in structural carbon fiber/epoxy composites interleaved with carbon nanotube veils
Yunfu Ou et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)
Towards balancing in-plane mechanical properties and impact damage tolerance of composite laminates using quasi-UD woven fabrics with hybrid warp yarns
K. B. Katnam et al.
COMPOSITE STRUCTURES (2019)
The influence of through-thickness reinforcement geometry and pattern on delamination of fiber-reinforced composites: Part I - Experimental results
Georgios Pappas et al.
COMPOSITE STRUCTURES (2018)
Compression properties of composite laminates reinforced with rectangular z-pins
Julian Hoffmann et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2018)
Mechanical Properties and Interlaminar Fracture Toughness of Glass-Fiber-Reinforced Epoxy Composites Embedded with Shape Memory Alloy Wires
Li-Dan Xu et al.
ADVANCED ENGINEERING MATERIALS (2018)
Effect of Thermoplastic Veils on Interlaminar Fracture Toughness of a Glass Fiber/Vinyl Ester Composite
Belen Del Saz-Orozco et al.
POLYMER COMPOSITES (2017)
Improvement of Mode I Interlaminar Fracture Toughness of Stitched Glass/Epoxy Composites
D. Goektas et al.
APPLIED COMPOSITE MATERIALS (2017)
Carbon nanotubes and core-shell rubber nanoparticles modified structural epoxy adhesives
Dong Quan et al.
JOURNAL OF MATERIALS SCIENCE (2017)
Multiscale Polymer Composites: A Review of the Interlaminar Fracture Toughness Improvement
Vishwesh Dikshit et al.
FIBERS (2017)
Interlaminar toughening of woven fabric carbon/epoxy composite laminates using hybrid aramid/phenoxy interleaves
Doris W. Y. Wong et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)
Toughening performance of glass fibre composites with core-shell rubber and silica nanoparticle modified matrices
Shamsiah Awang Ngah et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Enhanced toughness and glass transition temperature of epoxy nanocomposites filled with solvent-free liquid-like nanocrystal-functionalized graphene oxide
Peipei Li et al.
MATERIALS & DESIGN (2016)
Influence of z-pin length on the delamination fracture toughness and fatigue resistance of pinned composites
F. Pegorin et al.
COMPOSITES PART B-ENGINEERING (2015)
The influence of the nonwoven veil architectures on interlaminar fracture toughness of interleaved composites
Victor A. Ramirez et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2015)
Effect of core-shell rubber (CSR) nano-particles on mechanical properties and fracture toughness of an epoxy polymer
Dong Quan et al.
POLYMER (2015)
Carbon fiber-reinforced composites using an epoxy resin matrix modified with reactive liquid rubber and silica nanoparticles
Stephan Sprenger et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2014)
The mechanisms and mechanics of the toughening of epoxy polymers modified with fullerene C60
Vjacheslav V. Zuev
POLYMER ENGINEERING AND SCIENCE (2012)
Inter laminar toughness of interleaved CFRP using non-woven veils: Part 2. Mode-II testing
M. Kuwata et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2011)
Toughening of epoxy using core-shell particles
G. Giannakopoulos et al.
JOURNAL OF MATERIALS SCIENCE (2011)
Evaluation of the mechanical and damage behaviour of tufted non crimped fabric composites using full field measurements
M. Colin de Verdiere et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2009)
Use of rubber modification technique to improve fracture-resistance of hoop wound composites
M. Abadyan et al.
MATERIALS & DESIGN (2009)
Rubber-Toughened Epoxies: A Critical Review
R. Bagheri et al.
POLYMER REVIEWS (2009)
Influence of in-plane fibre orientation on mode I interlaminar fracture toughness of stitched glass/polyester composites
S. Solaimurugan et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2008)
Influence of bending rotations on three and four-point bend end notched flexure tests
A. Arrese et al.
ENGINEERING FRACTURE MECHANICS (2008)
Delamination of Z-pinned carbon fibre reinforced laminates
DDR Cartié et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2006)
Properties and failure mechanisms of z-pinned laminates in monotonic and cyclic tension
P. Chang et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2006)
The processing, properties, and structure of carbon fibers
ML Minus et al.
JOM (2005)
Mode II delamination toughness of z-pinned laminates\
WY Yan et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2004)
Effect of interleaved non-woven carbon tissue on interlaminar fracture toughness of laminated composites: Part I - Mode II
SH Lee et al.
JOURNAL OF COMPOSITE MATERIALS (2002)
Effect of interleaved non-woven carbon tissue on interlaminar fracture toughness of laminated composites: Part II - Mode I
SH Lee et al.
JOURNAL OF COMPOSITE MATERIALS (2002)
Challenges for composites into the next millennium - a reinforcement perspective
M Bannister
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2001)
A mechanistic approach to the properties of stitched laminates
AP Mouritz et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2000)
Share Paper
