Related references
Note: Only part of the references are listed.Axial compression behaviour of thin-walled metallic tubes under quasi-static and dynamic loading
S. K. Tak et al.
THIN-WALLED STRUCTURES (2021)
Soft body impact on composites: Delamination experiments and advanced numerical modelling
Jagan Selvaraj et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2021)
Loading rate dependency of strain energy release rate in mode I delamination of composite laminates
Amin Ekhtiyari et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2021)
The effect of stacking sequence on the LVI damage of laminated composites; experiments and analysis
Shiyao Lin et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)
Mesoscopic and multiscale modelling in materials
Jacob Fish et al.
NATURE MATERIALS (2021)
Energy absorption capacity of composite thin-wall circular tubes under axial crushing with different trigger initiations
J. E. Chambe et al.
JOURNAL OF COMPOSITE MATERIALS (2020)
Compressive intralaminar fracture toughness and residual strength of 2D woven carbon fibre reinforced composites: New developments on using the size effect method
D. Dalli et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2020)
Assessing the current modelling approach for predicting the crashworthiness of Formula One composite structures
D. Dalli et al.
COMPOSITES PART B-ENGINEERING (2020)
Micromechanical modelling of the longitudinal compressive and tensile failure of unidirectional composites: The effect of fibre misalignment introduced via a stochastic process
L. F. Varandas et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2020)
Development and validation of a finite deformation fibre kinking model for crushing of composites
Sergio Costa et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2020)
Predicting the low velocity impact damage of a quasi-isotropic laminate using EST
Shiyao Lin et al.
COMPOSITE STRUCTURES (2020)
An experimental and numerical study on the crush behaviour of hybrid unidirectional/woven carbon-fibre reinforced composite laminates
Haibao Liu et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)
Strain rate effects on the intralaminar fracture toughness of composite laminates subjected to compressive load
Bruno Martins Leite et al.
COMPOSITE STRUCTURES (2018)
Strain rate effects on the intralaminar fracture toughness of composite laminates subjected to tensile load
Luiz Fernando Martins Leite et al.
COMPOSITE STRUCTURES (2018)
Predicting the Compression-After-Impact (CAI) strength of damage-tolerant hybrid unidirectional/woven carbon-fibre reinforced composite laminates
Haibao Liu et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
The role of interfacial properties on the intralaminar and interlaminar damage behaviour of unidirectional composite laminates: Experimental characterization and multiscale modelling
W. Tan et al.
COMPOSITES PART B-ENGINEERING (2018)
Review and benchmark study on the analysis of low-velocity impact on composite laminates
Raffael Bogenfeld et al.
ENGINEERING FAILURE ANALYSIS (2018)
Energy absorption of metal, composite and metal/composite hybrid structures under oblique crushing loading
Guohua Zhu et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)
An experimental method to determine the intralaminar fracture toughness of high-strength carbon-fibre reinforced composite aerostructures
H. Liu et al.
AERONAUTICAL JOURNAL (2018)
Low-velocity impact predictions of composite laminates using a continuum shell based modeling approach Part b: BVID impact and compression after impact
Solver I. Thorsson et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2018)
Comment on A tensorial based progressive damage model for fibre reinforced polymers
Brian G. Falzon et al.
COMPOSITE STRUCTURES (2017)
Modelling damage growth in composites subjected to impact and compression after impact
M. R. Abir et al.
COMPOSITE STRUCTURES (2017)
The role of material characterisation in the crush modelling of thermoplastic composite structures
Wei Tan et al.
COMPOSITE STRUCTURES (2016)
Modelling the crush behaviour of thermoplastic composites
Wei Tan et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2016)
Physical modelling of failure in composites
Ramesh Talreja
PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2016)
Dynamic 4 ENF test for a strain rate dependent mode II interlaminar fracture toughness characterization of unidirectional carbon fibre epoxy composites
H. Zabala et al.
POLYMER TESTING (2016)
Crush responses of composite cylinder under quasi-static and dynamic loading
Louis N. S. Chiu et al.
COMPOSITE STRUCTURES (2015)
Finite element modelling of composite structures under crushing load
Louis N. S. Chiu et al.
COMPOSITE STRUCTURES (2015)
Predicting low velocity impact damage and Compression-After-Impact (CAI) behaviour of composite laminates
Wei Tan et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)
A numerical investigation into size effects in centre-notched quasi-isotropic carbon/epoxy laminates
Xiaodong Xu et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2015)
Predicting the crushing behaviour of composite material using high-fidelity finite element modelling
Wei Tan et al.
INTERNATIONAL JOURNAL OF CRASHWORTHINESS (2015)
Measurement of the compressive crack resistance curve of composites using the size effect law
G. Catalanotti et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2014)
Determination of the mode I crack resistance curve of polymer composites using the size-effect law
G. Catalanotti et al.
ENGINEERING FRACTURE MECHANICS (2014)
Analysis of Crushing Response of Composite Crashworthy Structures
Matthew David et al.
APPLIED COMPOSITE MATERIALS (2013)
Three-dimensional failure criteria for fiber-reinforced laminates
G. Catalanotti et al.
COMPOSITE STRUCTURES (2013)
Validation of low velocity impact modelling on different stacking sequences of CFRP laminates and influence of fibre failure
N. Hongkarnjanakul et al.
COMPOSITE STRUCTURES (2013)
Comparison of intralaminar and interlaminar mode I fracture toughnesses of a unidirectional IM7/8552 carbon/epoxy composite
Michael W. Czabaj et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2013)
Numerical damping of spurious oscillations: a comparison between the bulk viscosity method and the explicit dissipative Tchamwa-Wielgosz scheme
L. Maheo et al.
COMPUTATIONAL MECHANICS (2013)
Static and dynamic axial crushing analysis of car frontal impact hybrid absorbers
M. Costas et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2013)
Low velocity impact modeling in composite laminates capturing permanent indentation
C. Bouvet et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2012)
Investigation into laminate design of open carbon-fibre/epoxy sections by quasi-static and dynamic crushing
A. Jackson et al.
COMPOSITE STRUCTURES (2011)
High strain rate characterisation of unidirectional carbon-epoxy IM7-8552 in longitudinal compression
H. Koerber et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2011)
LS-DYNA MAT54 modeling of the axial crushing of a composite tape sinusoidal specimen
Paolo Feraboli et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2011)
Strain-rate-dependent failure criteria for composites
I. M. Daniel et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2011)
Predicting low-velocity impact damage on a stiffened composite panel
A. Faggiani et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2010)
On a new crush trigger for energy absorption of composite tubes
Jiancheng Huang et al.
INTERNATIONAL JOURNAL OF CRASHWORTHINESS (2010)
High strain rate characterisation of unidirectional carbon-epoxy IM7-8552 in transverse compression and in-plane shear using digital image correlation
H. Koerber et al.
MECHANICS OF MATERIALS (2010)
Nonlinear compressive stiffness in impacted composite laminates determined by an inverse method
Pavel Sztefek et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2009)
Characterization and modeling of rate effects in the dynamic propagation of mode-II delamination in composite laminates
Jean-Mathieu Guimard et al.
INTERNATIONAL JOURNAL OF FRACTURE (2009)
Strain Rate Effects on the Energy Absorption of Rapidly Manufactured Composite Tubes
Aaron Brighton et al.
JOURNAL OF COMPOSITE MATERIALS (2009)
A progressive failure model for composite laminates subjected to low velocity impact damage
M. V. Donadon et al.
COMPUTERS & STRUCTURES (2008)
Evaluating the rate-dependent fracture toughness of an automotive adhesive
D. J. Pohlit et al.
JOURNAL OF ADHESION (2008)
Mechanical behavior of unidirectional fiber-reinforced polymers under transverse compression:: Microscopic mechanisms and modeling
Carlos Gonzalez et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2007)
An engineering solution for mesh size effects in the simulation of delamination using cohesive zone models
A. Turon et al.
ENGINEERING FRACTURE MECHANICS (2007)
Intralaminar toughness characterisation of unbalanced hybrid plain weave laminates
Mauricio V. Donadon et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)
Fracture toughness of the tensile and compressive fibre failure modes in laminated composites
S. T. Pinho et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2006)
Crashworthiness of various random chopped carbon fiber reinforced epoxy composite materials and their strain rate dependence
GC Jacob et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2006)
Physically based failure models and criteria for laminated fibre-reinforced composites with emphasis on fibre kinking. Part II: FE implementation
ST Pinho et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2006)
Formulation and implementation of decohesion elements in an explicit finite element code
ST Pinho et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2006)
Prediction of in situ strengths and matrix cracking in composites under transverse tension and in-plane shear
PP Camanho et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2006)
On the response of thin-walled CFRP composite tubular components subjected to static and dynamic axial compressive loading: experimental
AG Mamalis et al.
COMPOSITE STRUCTURES (2005)
Dynamic mixed-mode I/II delamination fracture and energy release rate of unidirectional graphite/epoxy composites
SN Wosu et al.
ENGINEERING FRACTURE MECHANICS (2005)
A method for testing interlaminar dynamic fracture toughness of polymeric composites
CT Sun et al.
COMPOSITES PART B-ENGINEERING (2004)
Finite element simulation of the axial collapse of metallic thin-walled tubes with octagonal cross-section
AG Mamalis et al.
THIN-WALLED STRUCTURES (2003)
Numerical simulation of mixed-mode progressive delamination in composite materials
PP Camanho et al.
JOURNAL OF COMPOSITE MATERIALS (2003)
Analytical solutions for cohesive zone models
JG Williams et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2002)
Modelling interlaminar and intralaminar damage in filament-wound pipes under quasi-static indentation
Z Zou et al.
JOURNAL OF COMPOSITE MATERIALS (2002)
Energy absorption in polymer composites for automotive crashworthiness
GC Jacob et al.
JOURNAL OF COMPOSITE MATERIALS (2002)
Failure analysis of FRP laminates by means of physically based phenomenological models
A Puck et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2002)
Computational methods for predicting impact damage in composite structures
AF Johnson et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2001)
Impact energy absorption characteristics of composite structures
DG Lee et al.
COMPOSITE STRUCTURES (2000)