☆ 4.4 Article

Optimization and thermodynamic analysis of rib arrangement and height for microchannels with sharkskin bionic ribs

NUMERICAL HEAT TRANSFER PART A-APPLICATIONS (2023)

Related references

Note: Only part of the references are listed.

Article Thermodynamics

Heat transfer enhancement of symmetric and parallel wavy microchannel heat sinks with secondary branch design

Shuo-Lin Wang et al.

Summary: This study investigates the performance of microchannel heat sinks with symmetric and parallel wavy microchannels across a range of Reynolds numbers. It is found that the symmetric configuration shows higher heat transfer enhancement compared to the parallel configuration, but also comes with a higher pressure penalty. Introducing secondary branch designs significantly enhances heat transfer performance for the parallel wavy configurations.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2022)

Add to Collection

Article Thermodynamics

Numerical simulation study of thermal and hydraulic characteristics of laminar flow in microchannel heat sink with water droplet cavities and different rib columns

Qifeng Zhu et al.

Summary: Microchannel heat sinks with a combination of water droplet cavities and rib columns show improved overall performance in heat dissipation. The shape and geometric parameters of rib columns significantly affect hydrothermal performance. Among all cases, microchannels with water droplet cavities and elliptical rib columns exhibit the best overall performance.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2022)

Add to Collection

Article Thermodynamics

Multi-objective optimization and performance assessment of microchannel heat sinks with micro pin-fins

Muhammed Emin Polat et al.

Summary: This study numerically investigated laminar, steady-state microchannel flow and conjugate heat transfer in a microchannel heat sink with micro pin-fins. Through optimizing the arrangement of micro pin-fins, the study obtained optimized heat performance, with diamond-shaped pin-fins significantly enhancing heat transfer at an increased pressure drop ratio.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2022)

Add to Collection

Review Thermodynamics

Recent advances in condensation heat transfer in mini and micro channels: A comprehensive review

Khadije El Kadi et al.

Summary: The paper provides a comprehensive review of condensation studies in microchannels conducted in the last two decades, including experimental investigations, theoretical predictive models, and computational predictions. It presents a wide range of operating conditions, channel geometries, heat transfer fluids, research methods, and advancements in condensation heat transfer in mini and microchannels.

APPLIED THERMAL ENGINEERING (2021)

Add to Collection

Review Biophysics

A comprehensive review of powering methods used in state-of-the-art miniaturized implantable electronic devices

H. Dinis et al.

Summary: Microfabrication techniques, sensor and actuator miniaturization, optimization of microelectronic circuits, and wireless communication capabilities have enabled the development of implants for previously impossible applications. However, the scaling down of implants raises challenges in powering them, leading to emerging energy sources that do not rely on batteries. This paper reviews recent implantable bioelectronic devices that employ alternative powering methods and discusses their suitability for future devices.

BIOSENSORS & BIOELECTRONICS (2021)

Add to Collection

Article Thermodynamics

A numerical parametric study to enhance thermal hydraulic performance of a novel alternating offset oblique microchannel

Sanskar S. Panse et al.

Summary: A novel alternating offset oblique microchannel is proposed to enhance the thermal-hydraulic performance in microchannels, with optimized geometric parameters determined through numerical simulations. The study shows that THP trends vary with different geometric parameters within the tested range, with the optimal parameters of α=0.5, β=0.25, and θ=60 degrees yielding the highest THP.

NUMERICAL HEAT TRANSFER PART A-APPLICATIONS (2021)

Add to Collection

Article Thermodynamics

Thermo-hydraulic performance of nanofluids in a bionic heat sink

Jinghua Tang et al.

Summary: The study focuses on the development of a bionic surface based on the wing structure of the dragon louse for thermal management in electronic components, as well as the behavior of Fe3O4-water nanofluids under magnetic field. Various factors affecting heat transfer, such as nanofluid concentration, Reynolds number, magnetic field angle, and intensity, were considered. Results show that the bionic surface has a significant drag reduction effect and the magnetic field has a notable influence on CPU cooling.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)

Add to Collection

Article Thermodynamics

Thermal management and temperature uniformity enhancement of electronic devices by micro heat sinks: A review

Ziqiang He et al.

Summary: Micro heat sinks are crucial for addressing the challenges of high heat flux and non-uniform temperature distribution in electronic devices. Developments in thermal enhancement technologies and reducing non-uniform temperature distribution are essential. An effective adaptive cooling method is urgently needed to improve the efficiency and lifespan of electronic components.

ENERGY (2021)

Add to Collection

Article Thermodynamics

Numerical and experimental study on optimization of CPU system cooled by nanofluids

Tiantian Chen et al.

Summary: The study found that cooling with nanofluids can significantly reduce the temperature of the CPU, and designing the inlet and outlet at the top of the CPU can achieve better cooling efficiency.

CASE STUDIES IN THERMAL ENGINEERING (2021)

Add to Collection

Article Thermodynamics

Effect of wall roughness by the bionic structure of dragonfly wing on microfluid flow and heat transfer characteristics

Zhen Wang et al.

Summary: Through the design of bionic rectangular microchannel (BRM), the influence of wall roughness on flow and heat transfer performance is optimized, resulting in significantly improved heat transfer performance, increased flow velocity, significant temperature reduction, and further enhancement of flow and heat transfer performance.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

Add to Collection

Review Thermodynamics

A review on flow boiling enhancement and fabrication of enhanced microchannels of microchannel heat sinks

Daxiang Deng et al.

Summary: This paper comprehensively reviews recent advancements in flow boiling enhancement and fabrication of enhanced microchannels. It emphasizes the flow boiling enhancement performance of these enhanced microchannels in microchannel heat sinks, while also discussing their advantages and disadvantages after summarizing the classification and manufacturing methods of enhanced microchannels.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

Add to Collection

Article Thermodynamics

Effect of interface curvature on isothermal heat transfer in a hydrophobic microchannel with transverse ribs and cavities

M. G. Arun et al.

Summary: Superhydrophobic microchannels exhibit reduced frictional flow resistance due to entrapped air on their surface micro texture, but this air may negatively impact heat transfer performance. The shape of the menisci formed at the liquid-gas interface in these channels affects the thermo-hydraulic performance, with increased shear-free fraction leading to improved performance and concave menisci showing uniform Nusselt number. Ribbed hydrophobic channels outperform classical channels with uniform heating within a certain protrusion angle range.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2021)

Add to Collection

Article Thermodynamics

Conjugate heat transfer analysis for forced convective flow through a parallel plate microchannel: Effect of nonuniform asymmetric heating

Abhijit Borah et al.

Summary: This study numerically analyzed the influence of nonuniform asymmetric heating on forced convective heat transfer characteristics in a parallel plate microchannel. Results indicated that asymmetric heating has a greater impact on altering the overall thermal transport rate.

NUMERICAL HEAT TRANSFER PART A-APPLICATIONS (2021)

Add to Collection

Article Thermodynamics

Heat transfer enhancement, entropy generation and temperature uniformity analyses of shark-skin bionic modified microchannel heat sink

Ping Li et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

Add to Collection

Article Thermodynamics

Heat transfer enhancement of microchannel heat sink with longitudinal vortex generators and bypass jet flow

Jen-Chieh Cheng et al.

NUMERICAL HEAT TRANSFER PART A-APPLICATIONS (2020)

Add to Collection

Article Thermodynamics

Thermal analyses of minichannels and use of mathematical and numerical models

Manzoore Elahi M. Soudagar et al.

NUMERICAL HEAT TRANSFER PART A-APPLICATIONS (2020)

Add to Collection

Article Engineering, Manufacturing

Modulated vibration texturing of hierarchical microchannels with controllable profiles and orientations

Jianjian Wang et al.

CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY (2020)

Add to Collection

Article Thermodynamics

Thermal and flow characterization in nanochannels with tunable surface wettability: A comprehensive molecular dynamics study

Haiyi Sun et al.

NUMERICAL HEAT TRANSFER PART A-APPLICATIONS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Fabrication of arrays of tapered silicon micro-/nano-pillars by metal-assisted chemical etching and anisotropic wet etching

K. Yamada et al.

NANOTECHNOLOGY (2018)

Add to Collection

Article Engineering, Chemical

Nanofluid heat transfer analysis in a microchannel heat sink (MCHS) under the effect of magnetic field by means of KKL model

S. R. Hosseini et al.

POWDER TECHNOLOGY (2018)

Add to Collection

Article Thermodynamics

An overview of passive techniques for heat transfer augmentation in microchannel heat sink

Nor Azwadi Che Sidik et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2017)

Add to Collection

Article Thermodynamics

Experimental investigation on laminar forced convective heat transfer of ferrofluid loaded with carbon nanotubes under constant and alternating magnetic fields

A. Shahsavar et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2016)

Add to Collection

Article Thermodynamics

Heat and mass transfer characteristics of leaf-vein-inspired microchannels with wall thickening patterns

Yuanqiang Luo et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2016)

Add to Collection

Article Thermodynamics

Numerical investigation of heat transfer in extended surface microchannels

Vikas Yadav et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2016)

Add to Collection

Article Thermodynamics

Characteristics of laminar flow and heat transfer in microchannel heat sink with triangular cavities and rectangular ribs

Y. F. Li et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2016)

Add to Collection

Article Thermodynamics

Nature-inspired Inverted Fish Scale microscale passages for enhanced heat transfer

Aik Ling Goh et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2016)

Add to Collection

Article Thermodynamics

Numerical investigation of thermal enhancement in a micro heat sink with fan-shaped reentrant cavities and internal ribs

Guodong Xia et al.

APPLIED THERMAL ENGINEERING (2013)

Add to Collection

Article Engineering, Electrical & Electronic

Fabrication of nanowires on orthogonal surfaces of microchannels and their effect on pool boiling

Zhonghua Yao et al.

JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2012)

Add to Collection

Article Thermodynamics

A performance evaluation plot of enhanced heat transfer techniques oriented for energy-saving

J. F. Fan et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2009)

Add to Collection

© Peeref 2019-2024. All rights reserved.