☆ 4.8 Article

Ultrastable near-infrared perovskite light-emitting diodes

NATURE PHOTONICS (2022)

Related references

Note: Only part of the references are listed.

Article Optics

Comprehensive defect suppression in perovskite nanocrystals for high-efficiency light-emitting diodes

Young-Hoon Kim et al.

Summary: In this study, a one-dopant alloying strategy was employed to enhance electroluminescence efficiencies of metal halide perovskite nanocrystals (PNCs) by reducing defect formation and enhancing charge carrier confinement. Surface-stabilizing agents and bromide vacancy healing agents were utilized to decrease defect density and improve carrier confinement, resulting in significant enhancement in performance.

NATURE PHOTONICS (2021)

Add to Collection

Article Optics

Efficient and bright white light-emitting diodes based on single-layer heterophase halide perovskites

Jiawei Chen et al.

Summary: Halide perovskite LEDs are a new type of white light-emitting diode that utilizes efficient and low-cost lighting technologies, featuring a single broadband emissive layer without the need for phosphors. These LEDs operate with high peak luminance and external quantum efficiency, with potential for further improvements in the future through advancements in fabrication technology and mechanistic understanding.

NATURE PHOTONICS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Monodisperse Long-Chain Sulfobetaine-Capped CsPbBr3 Nanocrystals and Their Superfluorescent Assemblies

Franziska Krieg et al.

Summary: Ligand-capped nanocrystals of lead halide perovskites, particularly CsPbX3 NCs, exhibit large absorption cross section and efficient photoluminescence, making them attractive for applications in light-emitting devices and quantum optics. Size-selective precipitation of CsPbBr3 NCs coated with a long-chain sulfobetaine ligand yields monodisperse samples with tunable sizes, essential for studying their photophysics and practical applications. Additionally, zwitterion-capped NCs readily form long-range ordered superlattices with larger domain sizes and lower mosaicity, displaying superfluorescence at cryogenic temperatures.

ACS CENTRAL SCIENCE (2021)

Add to Collection

Article Multidisciplinary Sciences

Ligand-engineered bandgap stability in mixed-halide perovskite LEDs

Yasser Hassan et al.

Summary: By utilizing multidentate ligands to treat mixed-halide perovskite nanocrystals, efficient and color-stable red electroluminescence with a wavelength centered at 620 nanometers and an external quantum efficiency of 20.3% has been achieved. The key function of the ligand treatment is to 'clean' the nanocrystal surface by removing lead atoms, which suppresses the formation of iodine Frenkel defects and halide segregation. This work demonstrates the sensitivity of metal halide perovskites to surface properties and provides a pathway to control surface defect formation and migration, crucial for achieving bandgap stability for light emission and potentially impacting other optoelectronic applications.

NATURE (2021)

Add to Collection

Article Multidisciplinary Sciences

Phenylalkylammonium passivation enables perovskite light emitting diodes with record high-radiance operational lifetime: the chain length matters

Yuwei Guo et al.

Summary: Researchers investigate how the use of ammonium passivation molecules with different alkyl chain lengths can enhance device stability by suppressing iodide ion migration through steric hindrance and Coulomb interactions, thereby improving the performance of perovskite light emitting diodes.

NATURE COMMUNICATIONS (2021)

Add to Collection

Article Chemistry, Physical

Critical role of additive-induced molecular interaction on the operational stability of perovskite light-emitting diodes

Chaoyang Kuang et al.

Summary: This study demonstrates greatly improved operational stability of high-efficiency PeLEDs by incorporating dicarboxylic acids into the precursor for perovskite depositions. The stable amides formed through an in situ amidation process prevent detrimental reactions between the perovskites and the charge injection layer, ensuring excellent operational stability. By optimizing the amidation reaction in the perovskite emissive layers, efficient PeLEDs with a peak external quantum efficiency of 18.6% and a long half-life time of 682 h at 20 mA cm(-2) have been achieved, representing a significant breakthrough in PeLEDs.

JOULE (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Perovskite Light-Emitting Diodes with EQE Exceeding 28% through a Synergetic Dual-Additive Strategy for Defect Passivation and Nanostructure Regulation

Zhe Liu et al.

Summary: A synergetic dual-additive strategy was used to prepare perovskite films with low defect density and high environmental stability, leading to the formation of perovskite nanocrystals with a quasi-core/shell structure that exhibited improved stability and efficiency in green PeLEDs.

ADVANCED MATERIALS (2021)

Add to Collection

Article Optics

Bright and stable light-emitting diodes made with perovskite nanocrystals stabilized in metal-organic frameworks

Hsinhan Tsai et al.

Summary: The use of metal-organic frameworks to stabilize perovskite nanocrystals for LED production results in bright and stable light emission, overcoming the instability issues associated with solid films.

NATURE PHOTONICS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Degradation Mechanism of Perovskite Light-Emitting Diodes: An In Situ Investigation via Electroabsorption Spectroscopy and Device Modelling

Yuwei Guo et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Stabilizing Perovskite Light-Emitting Diodes by Incorporation of Binary Alkali Cations

Nan Li et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Multidisciplinary Sciences

A bilateral interfacial passivation strategy promoting efficiency and stability of perovskite quantum dot light-emitting diodes

Leimeng Xu et al.

NATURE COMMUNICATIONS (2020)

Add to Collection

Article Multidisciplinary Sciences

Vapor-assisted deposition of highly efficient, stable black-phase FAPbI3 perovskite solar cells

Haizhou Lu et al.

SCIENCE (2020)

Add to Collection

Article Multidisciplinary Sciences

Impact of strain relaxation on performance of α-formamidinium lead iodide perovskite solar cells

Gwisu Kim et al.

SCIENCE (2020)

Add to Collection

Article Energy & Fuels

All-perovskite tandem solar cells with 24.2% certified efficiency and area over 1 cm2using surface-anchoring zwitterionic antioxidant

Ke Xiao et al.

NATURE ENERGY (2020)

Add to Collection

Article Engineering, Electrical & Electronic

Efficient light-emitting diodes from mixed-dimensional perovskites on a fluoride interface

Baodan Zhao et al.

NATURE ELECTRONICS (2020)

Add to Collection

Article Chemistry, Physical

Zwitterionic-Surfactant-Assisted Room-Temperature Coating of Efficient Perovskite Solar Cells

Kuan Liu et al.

JOULE (2020)

Add to Collection

Article Optics

Visible quantum dot light-emitting diodes with simultaneous high brightness and efficiency

Huaibin Shen et al.

NATURE PHOTONICS (2019)

Add to Collection

Article Optics

Rational molecular passivation for high-performance perovskite light-emitting diodes

Weidong Xu et al.

NATURE PHOTONICS (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Engineering Color-Stable Blue Light-Emitting Diodes with Lead Halide Perovskite Nanocrystals

Stefan T. Ochsenbein et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Multidisciplinary Sciences

Planar perovskite solar cells with long-term stability using ionic liquid additives

Sai Bai et al.

NATURE (2019)

Add to Collection

Article Chemistry, Physical

Understanding the Improvement in the Stability of a Self-Assembled Multiple-Quantum Well Perovskite Light-Emitting Diode

Cheng Li et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2019)

Add to Collection

Article Optics

Efficient blue light-emitting diodes based on quantum-confined bromide perovskite nanostructures

Yang Liu et al.

NATURE PHOTONICS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

An add-on organic green-to-blue photon-upconversion layer for organic light emitting diodes

Lorenz Graf von Reventlow et al.

JOURNAL OF MATERIALS CHEMISTRY C (2018)

Add to Collection

Article Materials Science, Multidisciplinary

MAPbI3 and FAPbI3 perovskites as solar cells: Case study on structural, electrical and optical properties

Farhad Fouladi Targhi et al.

RESULTS IN PHYSICS (2018)

Add to Collection

Article Chemistry, Physical

Colloidal CsPbX3 (X = CI, Br, I) Nanocrystals 2.0: Zwitterionic Capping Ligands for Improved Durability and Stability

Franziska Krieg et al.

ACS ENERGY LETTERS (2018)

Add to Collection

Article Optics

Anion-exchange red perovskite quantum dots with ammonium iodine salts for highly efficient light-emitting devices

Takayuki Chiba et al.

NATURE PHOTONICS (2018)

Add to Collection

Article Multidisciplinary Sciences

Perovskite light-emitting diodes based on spontaneously formed submicrometre-scale structures

Yu Cao et al.

NATURE (2018)

Add to Collection

Article Multidisciplinary Sciences

Perovskite light-emitting diodes with external quantum efficiency exceeding 20 per cent

Kebin Lin et al.

NATURE (2018)

Add to Collection

Article Optics

High-efficiency perovskite-polymer bulk heterostructure light-emitting diodes

Baodan Zhao et al.

NATURE PHOTONICS (2018)

Add to Collection

Article Multidisciplinary Sciences

Unravelling the role of vacancies in lead halide perovskite through electrical switching of photoluminescence

Cheng Li et al.

NATURE COMMUNICATIONS (2018)

Add to Collection

Article Chemistry, Physical

Efficient Blue and White Perovskite Light-Emitting Diodes via Manganese Doping

Shaocong Hou et al.

JOULE (2018)

Add to Collection

Article Optics

Efficient perovskite light-emitting diodes featuring nanometre-sized crystallites

Zhengguo Xiao et al.

NATURE PHOTONICS (2017)

Add to Collection

Article Multidisciplinary Sciences

Long-lived efficient delayed fluorescence organic light-emitting diodes using n-type hosts

Lin-Song Cui et al.

NATURE COMMUNICATIONS (2017)

Add to Collection

Review Chemistry, Physical

Capturing the Sun: A Review of the Challenges and Perspectives of Perovskite Solar Cells

Michiel L. Petrus et al.

ADVANCED ENERGY MATERIALS (2017)

Add to Collection

Article Chemistry, Physical

Stabilizing the α-Phase of CsPbI3 Perovskite by Sulfobetaine Zwitterions in One-Step Spin-Coating Films

Qi Wang et al.

JOULE (2017)

Add to Collection

Article Chemistry, Multidisciplinary

CsPbX3 Quantum Dots for Lighting and Displays: Room-Temperature Synthesis, Photoluminescence Superiorities, Underlying Origins and White Light-Emitting Diodes

Xiaoming Li et al.

ADVANCED FUNCTIONAL MATERIALS (2016)

Add to Collection

Review Optics

Perovskite photonic sources

Brandon R. Sutherland et al.

NATURE PHOTONICS (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Interfacial Control Toward Efficient and Low-Voltage Perovskite Light-Emitting Diodes

Jianpu Wang et al.

ADVANCED MATERIALS (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Quantum Dot Light-Emitting Diodes Based on Inorganic Perovskite Cesium Lead Halides (CsPbX3)

Jizhong Song et al.

ADVANCED MATERIALS (2015)

Add to Collection

Review Chemistry, Multidisciplinary

Degradation Mechanisms and Reactions in Organic Light-Emitting Devices

Sebastian Scholz et al.

CHEMICAL REVIEWS (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Understanding the rate-dependent J-V hysteresis, slow time component, and aging in CH3NH3PbI3 perovskite solar cells: the role of a compensated electric field

W. Tress et al.

ENERGY & ENVIRONMENTAL SCIENCE (2015)

Add to Collection

Article Multidisciplinary Sciences

Overcoming the electroluminescence efficiency limitations of perovskite light-emitting diodes

Himchan Cho et al.

SCIENCE (2015)

Add to Collection

Article Chemistry, Physical

Anomalous Hysteresis in Perovskite Solar Cells

Henry J. Snaith et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2014)

Add to Collection

Article Nanoscience & Nanotechnology

Bright light-emitting diodes based on organometal halide perovskite

Zhi-Kuang Tan et al.

NATURE NANOTECHNOLOGY (2014)

Add to Collection

Article Multidisciplinary Sciences

Solution-processed multilayer small-molecule light-emitting devices with high-efficiency white-light emission

Naoya Aizawa et al.

NATURE COMMUNICATIONS (2014)

Add to Collection

Article Engineering, Electrical & Electronic

High-efficiency p-i-n organic light-emitting diodes with long lifetime

P Wellmann et al.

JOURNAL OF THE SOCIETY FOR INFORMATION DISPLAY (2005)

Add to Collection

Article Materials Science, Multidisciplinary

Long-term degradation mechanism of tris(8-hydroxyquinoline) aluminum-based organic light-emitting devices

ZD Popovic et al.

SYNTHETIC METALS (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.