☆ 4.8 Review

Realizing high-performance all-solid-state batteries with sulfide solid electrolyte and silicon anode: A review

NANO RESEARCH (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

A homogenous solid polymer electrolyte prepared by facile spray drying method is used for room-temperature solid lithium metal batteries

Zehao Zhou et al.

Summary: Solid polymer electrolytes prepared by spray drying method exhibit high tensile strength, high ionic conductivity, and wide electrochemical window, showing good mechanical properties and uniform lithium-ion migration channels, enabling stable cycling performance for lithium batteries.

NANO RESEARCH (2023)

Add to Collection

Article Chemistry, Multidisciplinary

F and N Rich Solid Electrolyte for Stable All-Solid-State Battery

Hongli Wan et al.

Summary: By adding a small amount of SEI and CEI formers into sulfide electrolytes, the performance of all-solid-state lithium batteries can be significantly enhanced, especially in terms of compatibility with Li anode and high-voltage cathode materials.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Universal Solution Synthesis of Sulfide Solid Electrolytes Using Alkahest for All-Solid-State Batteries

Ji Eun Lee et al.

Summary: The wet-chemical processability of sulfide solid electrolytes (SEs) presents a promising opportunity for all-solid-state batteries. This study introduces a universal solution synthesis method for preparing sulfide SEs from various precursors, including Li2S, P2S5, LiCl, Na2S, as well as metal sulfides such as GeS2 and SnS2. The solution-synthesized sulfide SEs exhibit high ionic conductivities and show potential for application in all-solid-state batteries.

ADVANCED MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Water-Stable Sulfide Solid Electrolyte Membranes Directly Applicable in All-Solid-State Batteries Enabled by Superhydrophobic Li+-Conducting Protection Layer

Jieru Xu et al.

Summary: A universal method was developed to create water-stable sulfide solid electrolyte membranes through spray coating a Li+-conductive superhydrophobic protection layer, which demonstrates excellent superhydrophobicity and maintains high electrochemical performance even under extreme water exposure conditions.

ADVANCED ENERGY MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Graphite-Silicon Diffusion-Dependent Electrode with Short Effective Diffusion Length for High-Performance All-Solid-State Batteries

Ju Young Kim et al.

Summary: Electrode design plays a crucial role in the performance of all-solid-state batteries. A simple electrode configuration using blended graphite and silicon active materials is presented in this study, which efficiently utilizes interdiffusion between the two materials to achieve high power and energy density.

ADVANCED ENERGY MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Exploring the concordant solid-state electrolytes for all-solid-state lithium-sulfur batteries

Xinxin Zhu et al.

Summary: The design of composite sulfur cathode is crucial for determining the physical and chemical properties of all-solid-state lithium-sulfur batteries (ASSLSBs), and the selection of solid-state electrolyte in the composite sulfur cathode is rarely studied. By comparing three typical sulfide solid-state electrolytes, the excellent compatibility between Li7P(3)S(11) electrolyte and sulfur cathode is revealed. The ASSLSBs based on Li7P(3)S(11) electrolytes exhibit fast reaction kinetics and high electrochemical stability, contributing to chemical congruency. These findings provide guidance for developing high-energy-density ASSLSBs.

NANO ENERGY (2022)

Add to Collection

Article Chemistry, Physical

Solvent-Free Approach for Interweaving Freestanding and Ultrathin Inorganic Solid Electrolyte Membranes

Changhong Wang et al.

Summary: This study successfully fabricated representative SE membranes with thin thickness and high room-temperature ionic conductivity using PTFE fibrilization technology. The all-solid-state pouch cells prepared with this technology exhibited high capacity and cycling stability.

ACS ENERGY LETTERS (2022)

Add to Collection

Article Chemistry, Physical

Lithium Argyrodite Sulfide Electrolytes with High Ionic Conductivity and Air Stability for All-Solid-State Li-Ion Batteries

Yongheum Lee et al.

Summary: Solid electrolytes, such as lithium thioantimonate iodide argyrodites, show high ionic conductivities and air-stability, making them promising materials for enhancing the performance of all-solid-state batteries. Ge-substituted thioantimonate argyrodites achieved high ionic conductivity and compatibility with catholytes, showing potential for cost-effective and stable all-solid-state batteries. The superionic conductors with high air-stability reported in this study demonstrate substantial promise for the development of all-solid-state batteries.

ACS ENERGY LETTERS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Long-Cycling Sulfide-Based All-Solid-State Batteries Enabled by Electrochemo-Mechanically Stable Electrodes

Daxian Cao et al.

Summary: The anode is crucial for the energy density in all-solid-state lithium batteries. This study investigates the stability, processability, and cost of silicon anodes, highlighting their potential compared to lithium metal. By sandwiching the stabilized cathode and thin solid-state electrolyte with the silicon anode, high cell-level energy density and stability are achieved, inspiring large-scale commercialization of all-solid-state lithium batteries.

ADVANCED MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Revealing the Design Principles of Ni-Rich Cathodes for All-Solid-State Batteries

Wei Jiang et al.

Summary: This study investigates the correlation between electrode microstructure and electrochemical behaviors through different electrode designs. It reveals a positive correlation between particle size and mass fraction in electrode design. Well interconnected active particles and solid electrolytes construct highly percolated ionic/electronic transfer networks, which determine the overall electrochemical properties.

ADVANCED ENERGY MATERIALS (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Lithium/Sulfide All-Solid-State Batteries using Sulfide Electrolytes

Jinghua Wu et al.

Summary: All-solid-state lithium batteries (ASSLBs) are considered the next generation electrochemical energy storage devices due to their high safety and energy density, along with simple packaging and wide operable temperature range. The sulfide electrolytes, with the highest ionic conductivity among solid-state electrolytes, face challenges such as narrow electrochemical stability window, unstable electrode/electrolyte interfaces, and lithium dendrite formation. Research on emerging sulfide electrolytes and preparation methods is ongoing, focusing on achieving required properties for stable electrochemical performance and compatible interfaces in ASSLBs.

ADVANCED MATERIALS (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Microscale Silicon-Based Anodes: Fundamental Understanding and Industrial Prospects for Practical High-Energy Lithium-Ion Batteries

Guanjia Zhu et al.

Summary: This review discusses the challenges in bridging the gap between industrial application and scientific research in Si-based batteries. Microscale design of Si-based electrodes with densified microstructure is seen as a key solution. Additionally, practical metrics and improvement strategies beyond active material are explored.

ACS NANO (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Promises and Challenges of Next-Generation Beyond Li-ion Batteries for Electric Vehicles and Grid Decarbonization

Yaosen Tian et al.

Summary: The significant advancements in performance and cost of lithium-ion batteries have made them the preferred technology for electrical energy storage, but they may not meet all the requirements for large-scale applications. Hence, exploration of beyond lithium-ion technologies including sodium-ion batteries, potassium-ion batteries, all-solid-state batteries, and multivalent batteries is accelerating.

CHEMICAL REVIEWS (2021)

Add to Collection

Article Chemistry, Physical

Si nanoparticles embedded in carbon nanofiber sheathed with Li6PS5Cl as an anode material for all-solid-state batteries

Jeongheon Kim et al.

Summary: Silicon nanoparticles embedded in carbon nanofiber sheathed with solid electrolyte show enhanced interfacial stability and improved electrochemical properties, leading to high energy density and stable cyclability for all-solid-state batteries.

JOURNAL OF POWER SOURCES (2021)

Add to Collection

Article Chemistry, Physical

Dual-salt-additive electrolyte enables high-voltage lithium metal full batteries capable of fast-charging ability

Xinyang Wang et al.

Summary: The study introduces an advanced carbonate-based electrolyte with dual-salt additives to improve the stability of lithium metal and Ni-rich cathode under high voltage or fast charge operations. The dual-salt additives establish robust and highly conductive solid electrolyte interphases, reducing electrode overpotential and enhancing capacity retention of the battery.

NANO ENERGY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Inhibiting Dendrite Growth via Regulating the Electrified Interface for Fast-Charging Lithium Metal Anode

Xinyang Wang et al.

Summary: In Extreme Fast Charging (XFC), it has been found that adaptively enhanced internal electric field in a constant voltage charging mode can facilitate Li+ migration towards the negatively charged lithium electrode, mitigating Li+ depletion at the interface and suppressing dendrites. Furthermore, more NO3- ions are involved in the solvation sheath, leading to nitride-enriched solid electrolyte interphase and favoring lower barriers for Li+ transport.

ACS CENTRAL SCIENCE (2021)

Add to Collection

Article Chemistry, Physical

Superior lithium-stable Li7P2S8I solid electrolyte for all-solid-state lithium batteries

Liping Wu et al.

Summary: The high lithium ionic conductivity and stability against lithium metal of the synthesized low temperature phase Li7P2S8I glass-ceramic electrolyte show a phase transition from low conductive thio-LISICON III analog to high conductive thio-LISICON II analog phase, resulting in favorable conductivity and long cycling stability for an all-solid-state lithium battery. The electrolyte also exhibits excellent dendrite suppression capability and compatibility with lithium metal, delivering high capacity retention and improved rate capacity.

JOURNAL OF POWER SOURCES (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Designing inorganic electrolytes for solid-state Li-ion batteries: A perspectine of LGPS and garnet

Feng Liang et al.

Summary: Solid-state Li-ion batteries (SSLBs) are promising next-generation energy storage devices with high energy density and enhanced safety. The solid-state electrolyte (SSE) is a key component for delivering the desired electrochemical performance characteristics. LGPS-type and garnet-type Li ion conductors are representative solid-state electrolytes that provide insights for future design and discovery of favorable solid-state Li-ion electrolytes for SSLBs. Recent advances in strategies to address the SSLB challenges have been discussed, along with a perspective on the future research directions of SSLBs.

MATERIALS TODAY (2021)

Add to Collection

Article Chemistry, Physical

Nano-synergy enables highly reversible storage of 9.2 wt% hydrogen at mild conditions with lithium borohydride

Xin Zhang et al.

Summary: This work presents an effective synthetic strategy for low-temperature and highly reversible hydrogen cycling with LiBH4 nanocomposite, showing superior hydrogen sorption capabilities and stable cyclability. The key factor influencing hydrogen cycling is the reactivity of boron, which has been successfully addressed in this study. The synergistic effects of nanostructuring and nanocatalysis contribute to efficient formation of BH4- hydrogenation and elemental boron during dehydrogenation process, shedding light on new strategies for practical hydrogen storage applications in borohydride family.

NANO ENERGY (2021)

Add to Collection

Review Chemistry, Physical

Current status and future directions of all-solid-state batteries with lithium metal anodes, sulfide electrolytes, and layered transition metal oxide cathodes

Chaoshan Wu et al.

Summary: All-solid-state batteries (ASSBs) show great promise as a next-generation energy storage technology with higher energy density, wider operating temperature range, and enhanced safety for electric vehicles. However, limitations in battery cycle life at high cathode mass loading and high current are still present due to incomplete understanding of failure mechanisms.

NANO ENERGY (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Issues and Advances in Scaling up Sulfide-Based All-Solid-State Batteries

Jieun Lee et al.

Summary: All-solid-state batteries are considered the next-generation energy storage concept, focusing on sulfide-based solid electrolytes for their high ionic conductivity and deformability. However, challenges such as air instability and electrode fabrication remain, with recent research efforts aimed at addressing these issues through novel materials and processing techniques.

ACCOUNTS OF CHEMICAL RESEARCH (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Superior All-Solid-State Batteries Enabled by a Gas-Phase-Synthesized Sulfide Electrolyte with Ultrahigh Moisture Stability and Ionic Conductivity

Pushun Lu et al.

Summary: Sulfide solid electrolytes (SEs) are considered promising for all-solid-state batteries (ASSBs) due to their superior ionic conductivity and ductility. A one-step gas-phase synthesis method for sulfide SEs with oxide raw materials in ambient air has been developed, achieving high ionic conductivity. ASSBs with Li3.875Sn0.875As0.125S4 show superior performance, breaking records for reversible capacity and cycle life.

ADVANCED MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

A Micrometer-Sized Silicon/Carbon Composite Anode Synthesized by Impregnation of Petroleum Pitch in Nanoporous Silicon

Sujong Chae et al.

Summary: The study reports a method of preserving the porous Si nanostructure by impregnating petroleum pitch inside porous Si before high-temperature treatment, resulting in a Si/C composite with desired porosity and high conductivity. In a Si||Li(Ni0.5Co0.2Mn0.3)O-2 (NMC532) battery, an anode with 80% pitch-derived carbon/nanoporous Si shows very stable cycling performance.

ADVANCED MATERIALS (2021)

Add to Collection

Article Multidisciplinary Sciences

Carbon-free high-loading silicon anodes enabled by sulfide solid electrolytes

Darren H. S. Tan et al.

Summary: The research successfully achieved stable operation of silicon anodes by using the interface passivating properties of sulfide solid electrolytes. Analysis showed that this approach eliminates continuous interfacial growth and irreversible lithium losses. The promising performance of microsilicon full cells can be attributed to the ideal interface properties between microsilicon and sulfide electrolytes and the unique chemomechanical behavior of the lithium-silicon alloy.

SCIENCE (2021)

Add to Collection

Review Chemistry, Applied

Interface engineering for composite cathodes in sulfide-based all-solid-state lithium batteries

Yu Li et al.

Summary: The all-solid-state lithium battery based on sulfide-based electrolyte is promising for high-energy storage systems, but faces challenges in achieving stable interfaces with composite cathodes. Various strategies have been explored to address the impedance issues at the interfaces. Future developments need to focus on overcoming challenges in composite cathodes to achieve high performance in all-solid-state batteries.

JOURNAL OF ENERGY CHEMISTRY (2021)

Add to Collection

Review Electrochemistry

Designing safer lithium-based batteries with nonflammable electrolytes: A review

Shichao Zhang et al.

Summary: Lithium-based batteries have made a significant impact on modern society, but safety issues like thermal runaway have hindered their practical application, especially with metal anodes. Recent research has focused on flame-retardant and nonflammable electrolytes, exploring their mechanisms, efficiency, and influence on battery performance. Future prospects involve designing safer lithium-based batteries with nonflammable electrolytes.

ESCIENCE (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Recent advances in sulfide electrolytes toward high specific energy solid-state lithium batteries

Tao Yu et al.

Summary: All-solid-state batteries (ASSBs) have attracted extensive attention due to their improved safety and high specific energy density, with sulfide electrolytes considered as the most promising candidates. Recent research focuses on element doping and interface modification of sulfide electrolyte layers to overcome obstacles for commercializing ASSBs.

MATERIALS CHEMISTRY FRONTIERS (2021)

Add to Collection

Article Electrochemistry

Nanostructured Si-C Composites As High-Capacity Anode Material For All-Solid-State Lithium-Ion Batteries

Stephanie Poetke et al.

Summary: The silicon carbon void structures (Si-C) show enhanced performance and lifetime compared to bare silicon nanoparticles in all-solid-state batteries. Kinetic limitations in the anode lead to a lowered voltage plateau in full cells compared to half cells. The solid electrolyte does not penetrate the Si-C void structure, resulting in higher initial coulombic efficiency.

BATTERIES & SUPERCAPS (2021)

Add to Collection

Review Chemistry, Multidisciplinary

All-solid-state lithium batteries enabled by sulfide electrolytes: from fundamental research to practical engineering design

Changhong Wang et al.

Summary: This review highlights the latest progress in sulfide electrolyte-based all-solid-state lithium batteries, focusing on effective strategies to improve ion conductivity and interface stability, as well as methods to address challenges at the cathode and anode interfaces. Advanced in situ characterization techniques are examined to provide a deeper understanding of the interface properties of all-solid-state lithium batteries.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Integration of Graphite and Silicon Anodes for the Commercialization of High-Energy Lithium-Ion Batteries

Sujong Chae et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Add to Collection

Article Chemistry, Physical

Stack Pressure Considerations for Room-Temperature All-Solid-State Lithium Metal Batteries

Jean-Marie Doux et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Li10Ge(P1-xSbx)2S12 Lithium-Ion Conductors with Enhanced Atmospheric Stability

Jianwen Liang et al.

CHEMISTRY OF MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Clarifying the relationship between redox activity and electrochemical stability in solid electrolytes

Tammo K. Schwietert et al.

NATURE MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Structural and electronic descriptors for atmospheric instability of Li-thiophosphate using density functional theory

Ji-Su Kim et al.

SOLID STATE IONICS (2020)

Add to Collection

Article Chemistry, Physical

A Versatile Sn-Substituted Argyrodite Sulfide Electrolyte for All-Solid-State Li Metal Batteries

Feipeng Zhao et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Passivation of the Cathode-Electrolyte Interface for 5 V-Class All-Solid-State Batteries

Gaozhan Liu et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Energy & Fuels

Solid versus Liquid-A Bottom-Up Calculation Model to Analyze the Manufacturing Cost of Future High-Energy Batteries

Joscha Schnell et al.

ENERGY TECHNOLOGY (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Site-Occupation-Tuned Superionic LixScCl3+xHalide Solid Electrolytes for All-Solid-State Batteries

Jianwen Liang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2020)

Add to Collection

Article Energy & Fuels

High-energy long-cycling all-solid-state lithium metal batteries enabled by silver-carbon composite anodes

Yong-Gun Lee et al.

NATURE ENERGY (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Superionic Halogen-Rich Li-Argyrodites Using In Situ Nanocrystal Nucleation and Rapid Crystal Growth

Wo Dum Jung et al.

NANO LETTERS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Materials Design Principles for Air-Stable Lithium/Sodium Solid Electrolytes

Yizhou Zhu et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Add to Collection

Article Chemistry, Physical

An integral interface with dynamically stable evolution on micron-sized SiOx particle anode

Ge Li et al.

NANO ENERGY (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Diatomite-Derived Hierarchical Porous Crystalline-AmorphousNetwork for High-Performance and Sustainable Si Anodes

Ying Zhang et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Solid-State Electrolyte Design for Lithium Dendrite Suppression

Xiao Ji et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Structural Distortion Induced by Manganese Activation in a Lithium-Rich Layered Cathode

Liguang Wang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2020)

Add to Collection

Review Energy & Fuels

A Review of Solid-State Lithium-Sulfur Battery: Ion Transport and Polysulfide Chemistry

Hui Pan et al.

ENERGY & FUELS (2020)

Add to Collection

Article Chemistry, Physical

Effects of volume variations under different compressive pressures on the performance and microstructure of all-solid-state batteries

Mari Yamamoto et al.

JOURNAL OF POWER SOURCES (2020)

Add to Collection

Article Electrochemistry

Stable Cyclability Caused by Highly Dispersed Nanoporous Si Composite Anodes with Sulfide-based Solid Electrolyte

Ryota Okuno et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)

Add to Collection

Article Chemistry, Physical

Interface-assisted in-situ growth of halide electrolytes eliminating interfacial challenges of all-inorganic solid-state batteries

Changhong Wang et al.

NANO ENERGY (2020)

Add to Collection

Review Chemistry, Physical

Processing Strategies to Improve Cell-Level Energy Density of Metal Sulfide Electrolyte-Based All-Solid-State Li Metal Batteries and Beyond

Daxian Cao et al.

ACS ENERGY LETTERS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Functionalized Sulfide Solid Electrolyte with Air-Stable and Chemical-Resistant Oxysulfide Nanolayer for All-Solid-State Batteries

Wo Dum Jung et al.

ACS OMEGA (2020)

Add to Collection

Article Chemistry, Physical

Atomic layer deposition of solid-state electrolytes for next-generation lithium-ion batteries and beyond: Opportunities and challenges

Xiangbo Meng

ENERGY STORAGE MATERIALS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Adhesive Sulfide Solid Electrolyte Interface for Lithium Metal Batteries

Wei Jiang et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Review Chemistry, Physical

Recently advances and perspectives of anode-free rechargeable batteries

Yuan Tian et al.

NANO ENERGY (2020)

Add to Collection

Article Chemistry, Multidisciplinary

All ceramic cathode composite design and manufacturing towards low interfacial resistance for garnet-based solid-state lithium batteries

Kun Joong Kim et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

Add to Collection

Review Chemistry, Multidisciplinary

A review on energy chemistry of fast-charging anodes

Wenlong Cai et al.

CHEMICAL SOCIETY REVIEWS (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Developing high safety Li-metal anodes for future high-energy Li-metal batteries: strategies and perspectives

Dai-Huo Liu et al.

CHEMICAL SOCIETY REVIEWS (2020)

Add to Collection

Article Chemistry, Physical

Impact of the Li substructure on the diffusion pathways in alpha and beta Li3PS4: anin situhigh temperature neutron diffraction study

Kavish Kaup et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Article Electrochemistry

Towards the Commercialization of the All-Solid-State Li-ion Battery: Local Bonding Structure and the Reversibility of Sheet-Style Si-PAN Anodes

Nathan Arthur Dunlap et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)

Add to Collection

Article Chemistry, Physical

Ionic liquid-reinforced carbon nanofiber matrix enabled lean-electrolyte Li-S batteries via electrostatic attraction

Xinyang Wang et al.

ENERGY STORAGE MATERIALS (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Confronting the Challenges of Next-Generation Silicon Anode-Based Lithium-Ion Batteries: Role of Designer Electrolyte Additives and Polymeric Binders

Gebrekidan Gebresilassie Eshetu et al.

CHEMSUSCHEM (2019)

Add to Collection

Article Chemistry, Physical

Electronic and mechanistic origins of the superionic conductivity of sulfide-based solid electrolytes

Yong-Seok Choi et al.

JOURNAL OF POWER SOURCES (2019)

Add to Collection

Review Chemistry, Physical

Strategies for improving the storage performance of silicon-based anodes in lithium-ion batteries

Wei Tao et al.

NANO RESEARCH (2019)

Add to Collection

Article Multidisciplinary Sciences

Scalable synthesis of ant-nest-like bulk porous silicon for high-performance lithium-ion battery anodes

Weili An et al.

NATURE COMMUNICATIONS (2019)

Add to Collection

Review Chemistry, Multidisciplinary

Liquid-phase syntheses of sulfide electrolytes for all-solid-state lithium battery

Akira Miura et al.

NATURE REVIEWS CHEMISTRY (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Boosting Solid-State Diffusivity and Conductivity in Lithium Superionic Argyrodites by Halide Substitution

Parvin Adeli et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)

Add to Collection

Article Chemistry, Physical

Weak Anisotropic Lithium-Ion Conductivity in Single Crystals of Li10GeP2S12

Rui Iwasaki et al.

CHEMISTRY OF MATERIALS (2019)

Add to Collection

Review Engineering, Chemical

Realizing High Voltage Lithium Cobalt Oxide in Lithium-Ion Batteries

Xiao Wang et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Graphitic Hollow Nanocarbon as a Promising Conducting Agent for Solid-State Lithium Batteries

Sang Wook Park et al.

SMALL (2019)

Add to Collection

Article Chemistry, Physical

Preparation and characterization of lithium ion conductive Li3SbS4 glass and glass-ceramic electrolytes

Takuya Kimura et al.

SOLID STATE IONICS (2019)

Add to Collection

Article Chemistry, Physical

Sheet-type Li6PS5Cl-infiltrated Si anodes fabricated by solution process for all-solid-state lithium-ion batteries

Dong Hyeon Kim et al.

JOURNAL OF POWER SOURCES (2019)

Add to Collection

Article Chemistry, Physical

Critical stripping current leads to dendrite formation on plating in lithium anode solid electrolyte cells

Jitti Kasemchainan et al.

NATURE MATERIALS (2019)

Add to Collection

Article Energy & Fuels

Long cycle life and dendrite-free lithium morphology in anode-free lithium pouch cells enabled by a dual-salt liquid electrolyte

Rochelle Weber et al.

NATURE ENERGY (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Everlasting Living and Breathing Gyroid 3D Network in Si@SiOx/C Nanoarchitecture for Lithium Ion Battery

Jaewoo Lee et al.

ACS NANO (2019)

Add to Collection

Review Chemistry, Multidisciplinary

Sulfide-Based Solid-State Electrolytes: Synthesis, Stability, and Potential for All-Solid-State Batteries

Qing Zhang et al.

ADVANCED MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Safety-reinforced rechargeable Li-CO2 battery based on a composite solid state electrolyte

Rui Wang et al.

NANO RESEARCH (2019)

Add to Collection

Article Chemistry, Physical

Elucidating Reversible Electrochemical Redox of Li6PS5CI Solid Electrolyte

Darren H. S. Tan et al.

ACS ENERGY LETTERS (2019)

Add to Collection

Article Chemistry, Physical

Effect of N/P ratios on the performance of LiNi0.8Co0.15Al0.05O2∥SiOx/Graphite lithium-ion batteries

Zhan Chen et al.

JOURNAL OF POWER SOURCES (2019)

Add to Collection

Article Chemistry, Physical

All-in-one improvement toward Li6PS5Br-Based solid electrolytes triggered by compositional tune

Zhixia Zhang et al.

JOURNAL OF POWER SOURCES (2019)

Add to Collection

Article Energy & Fuels

High electronic conductivity as the origin of lithium dendrite formation within solid electrolytes

Fudong Han et al.

NATURE ENERGY (2019)

Add to Collection

Article Chemistry, Physical

Covalent interfacial coupling for hybrid solid-state Li ion conductor

Jing Li et al.

ENERGY STORAGE MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

High air-stability and superior lithium ion conduction of Li3+3xP1-xZnxS4-xOx by aliovalent substitution of ZnO for all-solid-state lithium batteries

Gaozhan Liu et al.

ENERGY STORAGE MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Enabling Thin and Flexible Solid-State Composite Electrolytes by the Scalable Solution Process

Darren H. S. Tan et al.

ACS APPLIED ENERGY MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Solid Electrolyte Interphase on Native Oxide-Terminated Silicon Anodes for Li-Ion Batteries

Chuntian Cao et al.

JOULE (2019)

Add to Collection

Article Energy & Fuels

Practical evaluation of energy densities for sulfide solid-state batteries

Lilu Liu et al.

ETRANSPORTATION (2019)

Add to Collection

Article Chemistry, Physical

Stable Li-Metal Deposition via a 3D Nanodiamond Matrix with Ultrahigh Young's Modulus

Weidong Zhang et al.

SMALL METHODS (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Interface Re-Engineering of Li10GeP2S12 Electrolyte and Lithium anode for All-Solid-State Lithium Batteries with Ultralong Cycle Life

Zhihua Zhang et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection

Article Chemistry, Physical

Native Defects in Li10GeP2S12 and Their Effect on Lithium Diffusion

Kyungbae Oh et al.

CHEMISTRY OF MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Chemo-mechanical expansion of lithium electrode materials - on the route to mechanically optimized all-solid-state batteries

Raimund Koerver et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

Add to Collection

Article Chemistry, Physical

Simple and inexpensive coal-tar-pitch derived Si-C anode composite for all-solid-state Li-ion batteries

Nathan Arthur Dunlap et al.

SOLID STATE IONICS (2018)

Add to Collection

Article Chemistry, Physical

Fabrication of Sub-Micrometer-Thick Solid Electrolyte Membranes of beta-Li3PS4 via Tiled Assembly of Nanoscale, Plate-Like Building Blocks

Zachary D. Hood et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Design Strategies, Practical Considerations, and New Solution Processes of Sulfide Solid Electrolytes for All-Solid-State Batteries

Kern Ho Park et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

Article Multidisciplinary Sciences

Binder-free sheet-type all-solid-state batteries with enhanced rate capabilities and high energy densities

Mari Yamamoto et al.

SCIENTIFIC REPORTS (2018)

Add to Collection

Article Chemistry, Physical

Diagnosis of failure modes for all-solid-state Li-ion batteries enabled by three-electrode cells

Young Jin Nam et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Preparation of sulfide solid electrolytes in the Li2S-P2S5 system by a liquid phase process

Marcela Calpa et al.

INORGANIC CHEMISTRY FRONTIERS (2018)

Add to Collection

Article Chemistry, Physical

Slurry mixing for fabricating silicon-composite electrodes in all-solid-state batteries with high areal capacity and cycling stability

Mari Yamamoto et al.

JOURNAL OF POWER SOURCES (2018)

Add to Collection

Article Multidisciplinary Sciences

Advanced sulfide solid electrolyte by core-shell structural design

Fan Wu et al.

NATURE COMMUNICATIONS (2018)

Add to Collection

Editorial Material Multidisciplinary Sciences

Aligning academia and industry for unified battery performance metrics

Zhan Lin et al.

NATURE COMMUNICATIONS (2018)

Add to Collection

Article Multidisciplinary Sciences

Fluorinated solid electrolyte interphase enables highly reversible solid-state Li metal battery

Xiulin Fan et al.

SCIENCE ADVANCES (2018)

Add to Collection

Review Electrochemistry

High-Performance Anode Materials for Rechargeable Lithium-Ion Batteries

Jun Lu et al.

ELECTROCHEMICAL ENERGY REVIEWS (2018)

Add to Collection

Article Chemistry, Physical

Mechanical Properties of Li2S-P2S5 Glasses with Lithium Halides and Application in All-Solid-State Batteries

Atsutaka Kato et al.

ACS APPLIED ENERGY MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

High-Performance All-Solid-State Lithium-Sulfur Batteries Enabled by Amorphous Sulfur-Coated Reduced Graphene Oxide Cathodes

Xiayin Yao et al.

ADVANCED ENERGY MATERIALS (2017)

Add to Collection

Article Chemistry, Physical

Single-step wet-chemical fabrication of sheet-type electrodes from solid-electrolyte precursors for all-solid-state lithium-ion batteries

Dae Yang Oh et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Add to Collection

Review Chemistry, Physical

An overview of molecular layer deposition for organic and organic-inorganic hybrid materials: mechanisms, growth characteristics, and promising applications

Xiangbo Meng

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Add to Collection

Article Chemistry, Physical

Lithium ion conductivity in Li2S-P2S5 glasses - building units and local structure evolution during the crystallization of superionic conductors Li3PS4, Li7P3S11 and Li4P2S7

Christian Dietrich et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Add to Collection

Article Chemistry, Physical

(Electro)chemical expansion during cycling: monitoring the pressure changes in operating solid-state lithium batteries

Wenbo Zhang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Fast synthesis of Li2S-P2S5-LiI solid electrolyte precursors

Nguyen Huu Huy Phuc et al.

INORGANIC CHEMISTRY FRONTIERS (2017)

Add to Collection

Article Chemistry, Physical

Quantum Mechanics Reactive Dynamics Study of Solid Li-Electrode/Li6PS5Cl-Electrolyte Interface

Tao Cheng et al.

ACS ENERGY LETTERS (2017)

Add to Collection

Review Nanoscience & Nanotechnology

Lithium battery chemistries enabled by solid-state electrolytes

Arumugam Manthiram et al.

NATURE REVIEWS MATERIALS (2017)

Add to Collection

Article Electrochemistry

Effect of Processing Conditions of 75Li2S-25P2S5 Solid Electrolyte on its DC Electrochemical Behavior

Regina Garcia-Mendez et al.

ELECTROCHIMICA ACTA (2017)

Add to Collection

Article Chemistry, Physical

Elastic Properties of the Solid Electrolyte Li7La3Zr2O12 (LLZO)

Seungho Yu et al.

CHEMISTRY OF MATERIALS (2016)

Add to Collection

Article Electrochemistry

High-Capacity and Highly Reversible Silicon-Tin Hybrid Anode for Solid-State Lithium-Ion Batteries

Justin M. Whiteley et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2016)

Add to Collection

Article Chemistry, Physical

Bulk-Type All Solid-State Batteries with 5 V Class LiNi0.5Mn1.5O4 Cathode and Li10GeP2S12 Solid Electrolyte

Gwangseok Oh et al.

CHEMISTRY OF MATERIALS (2016)

Add to Collection

Article Chemistry, Physical

Structural Insights and 3D Diffusion Pathways within the Lithium Superionic Conductor Li10GeP2S12

Dominik A. Weber et al.

CHEMISTRY OF MATERIALS (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Micron-sized Fe-Cu-Si ternary composite anodes for high energy Li-ion batteries

Sujong Chae et al.

ENERGY & ENVIRONMENTAL SCIENCE (2016)

Add to Collection

Article Chemistry, Physical

Oxygen-driven transition from two-dimensional to three-dimensional transport behaviour in β-Li3PS4 electrolyte

Xuelong Wang et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2016)

Add to Collection

Article Chemistry, Physical

Preparation of Li3PS4 solid electrolyte using ethyl acetate as synthetic medium

Nguyen Huu Huy Phuc et al.

SOLID STATE IONICS (2016)

Add to Collection

Article Chemistry, Physical

Structural and electrolyte properties of Li4P2S6

Zachary D. Hood et al.

SOLID STATE IONICS (2016)

Add to Collection

Article Chemistry, Physical

Chemical synthesis of Li3PS4 precursor suspension by liquid-phase shaking

Nguyen Huu Huy Phuc et al.

SOLID STATE IONICS (2016)

Add to Collection

Article Chemistry, Physical

Electrochemical Stability of Li10GeP2S12 and Li7La3Zr2O12 Solid Electrolytes

Fudong Han et al.

ADVANCED ENERGY MATERIALS (2016)

Add to Collection

Article Chemistry, Physical

Fabrication of ultrathin solid electrolyte membranes of β-Li3PS4 nanoflakes by evaporation-induced self-assembly for all-solid-state batteries

Hui Wang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2016)

Add to Collection

Article Energy & Fuels

Growth of conformal graphene cages on micrometre-sized silicon particles as stable battery anodes

Yuzhang Li et al.

NATURE ENERGY (2016)

Add to Collection

Article Energy & Fuels

High-power all-solid-state batteries using sulfide superionic conductors

Yuki Kato et al.

NATURE ENERGY (2016)

Add to Collection

Article Energy & Fuels

Lithium Superionic Conductor Li9.42Si1.02P2.1S9.96O2.04 with Li10GeP2S12-Type Structure in the Li2S-P2S5-SiO2 Pseudoternary System: Synthesis, Electrochemical Properties, and Structure Composition Relationships

Satoshi Hori et al.

FRONTIERS IN ENERGY RESEARCH (2016)

Add to Collection

Article Nanoscience & Nanotechnology

Origin of Outstanding Stability in the Lithium Solid Electrolyte Materials: Insights from Thermodynamic Analyses Based on First-Principles Calculations

Yizhou Zhu et al.

ACS APPLIED MATERIALS & INTERFACES (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Ultra-thin Solid-State Li-Ion Electrolyte Membrane Facilitated by a Self-Healing Polymer Matrix

Justin M. Whiteley et al.

ADVANCED MATERIALS (2015)

Add to Collection

Article Chemistry, Multidisciplinary

An Iodide-Based Li7P2S8I Superionic Conductor

Ezhiylmurugan Rangasamy et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Bendable and Thin Sulfide Solid Electrolyte Film: A New Electrolyte Opportunity for Free-Standing and Stackable High-Energy All-Solid-State Lithium-Ion Batteries

Young Jin Nam et al.

NANO LETTERS (2015)

Add to Collection

Article Chemistry, Physical

Design principles for solid-state lithium superionic conductors

Yan Wang et al.

NATURE MATERIALS (2015)

Add to Collection

Article Chemistry, Physical

The filler effect: A study of solid oxide fillers with β-Li3PS4 for lithium conducting electrolytes

Zachary D. Hood et al.

SOLID STATE IONICS (2015)

Add to Collection

Article Electrochemistry

Preparation of Mesoporous Si@PAN Electrodes for Li-Ion Batteries via the In-Situ Polymerization of PAN

Thomas A. Yersak et al.

ECS ELECTROCHEMISTRY LETTERS (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Systematic Computational and Experimental Investigation of Lithium-Ion Transport Mechanisms in Polyester-Based Polymer Electrolytes

Michael A. Webb et al.

ACS CENTRAL SCIENCE (2015)

Add to Collection

Article Chemistry, Physical

Space-Charge Layer Effect at Interface between Oxide Cathode and Sulfide Electrolyte in All-Solid-State Lithium-Ion Battery

Jun Haruyama et al.

CHEMISTRY OF MATERIALS (2014)

Add to Collection

Article Electrochemistry

Comparative Study of TiS2/Li-In All-Solid-State Lithium Batteries Using Glass-Ceramic Li3PS4 and Li10GeP2S12 Solid Electrolytes

Bum Ryong Shin et al.

ELECTROCHIMICA ACTA (2014)

Add to Collection

Article Chemistry, Multidisciplinary

A sulphide lithium super ion conductor is superior to liquid ion conductors for use in rechargeable batteries

Yoshikatsu Seino et al.

ENERGY & ENVIRONMENTAL SCIENCE (2014)

Add to Collection

Article Chemistry, Physical

Improved chemical stability and cyclability in Li2S-P2S5-P2O5-ZnO composite electrolytes for all-solid-state rechargeable lithium batteries

Akitoshi Hayashi et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2014)

Add to Collection

Article Chemistry, Physical

A synthesis of crystalline Li7P3S11 solid electrolyte from 1,2-dimethoxyethane solvent

Seitaro Ito et al.

JOURNAL OF POWER SOURCES (2014)

Add to Collection

Article Electrochemistry

Mechanical Deformation of a Lithium-Metal Anode Due to a Very Stiff Separator

Anthony Ferrese et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2014)

Add to Collection

Article Chemistry, Multidisciplinary

Lithium Polysulfidophosphates: A Family of Lithium-Conducting Sulfur-Rich Compounds for Lithium-Sulfur Batteries

Zhan Lin et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2013)

Add to Collection

Article Chemistry, Multidisciplinary

Li10SnP2S12: An Affordable Lithium Superionic Conductor

Philipp Bron et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2013)

Add to Collection

Article Chemistry, Multidisciplinary

Anomalous High Ionic Conductivity of Nanoporous β-Li3PS4

Zengcai Liu et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2013)

Add to Collection

Article Electrochemistry

Effect of Compressive Stress on Electrochemical Performance of Silicon Anodes

Daniela Molina Piper et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2013)

Add to Collection

Article Electrochemistry

An All-Solid-State Li-Ion Battery with a Pre-Lithiated Si-Ti-Ni Alloy Anode

Thomas A. Yersak et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2013)

Add to Collection

Article Multidisciplinary Sciences

Sulfide Solid Electrolyte with Favorable Mechanical Property for All-Solid-State Lithium Battery

Atsushi Sakuda et al.

SCIENTIFIC REPORTS (2013)

Add to Collection

Article Chemistry, Physical

Improvement of chemical stability of Li3PS4 glass electrolytes by adding MxOy (M = Fe, Zn, and Bi) nanoparticles

Akitoshi Hayashi et al.

JOURNAL OF MATERIALS CHEMISTRY A (2013)

Add to Collection

Article Materials Science, Ceramics

Evaluation of elastic modulus of Li2S-P2S5 glassy solid electrolyte by ultrasonic sound velocity measurement and compression test

Atsushi Sakuda et al.

JOURNAL OF THE CERAMIC SOCIETY OF JAPAN (2013)

Add to Collection

Article Chemistry, Physical

New Lithium Chalcogenidotetrelates, LiChT: Synthesis and Characterization of the Li+-Conducting Tetralithium ortho-Sulfidostannate Li4SnS4

Thomas Kaib et al.

CHEMISTRY OF MATERIALS (2012)

Add to Collection

Article Chemistry, Physical

Mechanochemical synthesis of Li-argyrodite Li6PS5X (X = Cl, Br, I) as sulfur-based solid electrolytes for all solid state batteries application

Sylvain Boulineau et al.

SOLID STATE IONICS (2012)

Add to Collection

Article Chemistry, Physical

Structure, ionic conductivity and electrochemical stability of Li2S-P2S5-LiI glass and glass-ceramic electrolytes

Satoshi Ujiie et al.

SOLID STATE IONICS (2012)

Add to Collection

Article Chemistry, Physical

Electrochemical properties of the amorphous solid electrolytes in the system Li2S-Al2S3-P2S5

Yuji Ooura et al.

SOLID STATE IONICS (2012)

Add to Collection

Article Chemistry, Physical

A lithium superionic conductor

Noriaki Kamaya et al.

NATURE MATERIALS (2011)

Add to Collection

Article Chemistry, Physical

Structural change of Li2S-P2S5 sulfide solid electrolytes in the atmosphere

Hiromasa Muramatsu et al.

SOLID STATE IONICS (2011)

Add to Collection

Article Chemistry, Physical

Crystal structure and phase transitions of the lithium ionic conductor Li3PS4

Kenji Homma et al.

SOLID STATE IONICS (2011)

Add to Collection

Article Electrochemistry

Improved Performance of All-Solid-State Lithium-Ion Batteries Using Nanosilicon Active Material with Multiwalled-Carbon-Nanotubes as a Conductive Additive

James E. Trevey et al.

ELECTROCHEMICAL AND SOLID STATE LETTERS (2010)

Add to Collection

Article Engineering, Electrical & Electronic

What is the Young's Modulus of Silicon?

Matthew A. Hopcroft et al.

JOURNAL OF MICROELECTROMECHANICAL SYSTEMS (2010)

Add to Collection

Article Electrochemistry

Glass-ceramic Li2S-P2S5 electrolytes prepared by a single step ball billing process and their application for all-solid-state lithium-ion batteries

James Trevey et al.

ELECTROCHEMISTRY COMMUNICATIONS (2009)

Add to Collection

Article Chemistry, Multidisciplinary

Li6PS5X: A class of crystalline Li-rich solids with an unusually high Li+ mobility

Hans-Joerg Deiseroth et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2008)

Add to Collection

Article Materials Science, Ceramics

Structure and properties of the 70Li2S•(30-x)P2S5 • xP2O5 oxysulfide glasses and glass-ceramics

Keiichi Minami et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2008)

Add to Collection

Article Multidisciplinary Sciences

Building better batteries

M. Armand et al.

NATURE (2008)

Add to Collection

Article Electrochemistry

Reversible cycling of crystalline silicon powder

M. N. Obrovac et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2007)

Add to Collection

Article Chemistry, Multidisciplinary

New, highly ion-conductive crystals precipitated from Li2S-P2S5 glasses

F Mizuno et al.

ADVANCED MATERIALS (2005)

Add to Collection

Article Electrochemistry

The impact of elastic deformation on deposition kinetics at lithium/polymer interfaces

C Monroe et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2005)

Add to Collection

Article Electrochemistry

Formation of superionic crystals from mechanically milled Li2S-P2S5 glasses

A Hayashi et al.

ELECTROCHEMISTRY COMMUNICATIONS (2003)

Add to Collection

Article Chemistry, Physical

New lithium ion conducting glass-ceramics prepared from mechanochemical Li2S-P2S5 glasses

M Tatsumisago et al.

SOLID STATE IONICS (2002)

Add to Collection

Article Electrochemistry

Lithium ionic conductor thio-LISICON -: The Li2S-GeS2-P2S5 system

R Kanno et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.