☆ 4.8 Article

N-doped carbon nanocube with zinc oxide sodiophilic sites enables a superior sodium metal anode

NANO RESEARCH (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

A homogenous solid polymer electrolyte prepared by facile spray drying method is used for room-temperature solid lithium metal batteries

Zehao Zhou et al.

Summary: Solid polymer electrolytes prepared by spray drying method exhibit high tensile strength, high ionic conductivity, and wide electrochemical window, showing good mechanical properties and uniform lithium-ion migration channels, enabling stable cycling performance for lithium batteries.

NANO RESEARCH (2023)

Add to Collection

Article Multidisciplinary Sciences

Research Article Deciphering the Role of Fluoroethylene Carbonate towards Highly Reversible Sodium Metal Anodes

Xueying Zheng et al.

RESEARCH (2022)

Add to Collection

Article Chemistry, Physical

NaF-rich solid electrolyte interphase for dendrite-free sodium metal batteries

Mengyang Xu et al.

Summary: A strategy of in situ forming a protective layer to suppress dendrite growth on sodium metal has been developed, leading to enhanced cyclic stability of sodium metal batteries. The design of a NaF-rich solid electrolyte interface prevents continuous electrolyte depletion during charge/discharge cycles and contributes to the high performance of the batteries.

ENERGY STORAGE MATERIALS (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Surface-substituted Prussian blue analogue cathode for sustainable potassium-ion batteries

Junmin Ge et al.

Summary: Aqueous potassium-ion batteries have emerged as a more sustainable technology to complement lithium-ion counterparts. Ge et al. engineer the surface of a potassium manganese hexacyanoferrate cathode material, achieving unprecedented electrochemical performance in full K-ion cells.

NATURE SUSTAINABILITY (2022)

Add to Collection

Article Chemistry, Multidisciplinary

High-Potential Cathodes with Nitrogen Active Centres for Quasi-Solid Proton-Ion Batteries

Dongyang Shen et al.

Summary: Proton-ion batteries have gained attention for their reliability, safety, toxin-free nature, and low cost, but their development is still at an early stage due to the lack of proper electrolytes and cathodes. Researchers have introduced a novel cathode based on active nitrogen center and a quasi-solid electrolyte to enhance the battery's stability and prevent corrosion and dissolution of the active material. They have also demonstrated the excellent cycle performance of a metal-free, flexible, soft-packed battery.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2022)

Add to Collection

Article Chemistry, Physical

An organosulfide-based energetic liquid as the catholyte in high-energy density lithium metal batteries for large-scale grid energy storage

Zhengkun Xie et al.

Summary: The development of catholytes with long-cycle lifespan, high interfacial stability, and fast electrochemical kinetics is crucial for the comprehensive deployment of high-energy density lithium metal batteries. In this study, a lithiated 2-mercaptopyridine (2-MP-Li) organosulfide was synthesized and used as the soluble catholyte for the first time. The LMB using this 2-MP-Li catholyte exhibited high capacity retention, excellent rate performance, and improved interfacial stability, leading to a potential application in large-scale grid energy storage.

NANO RESEARCH (2022)

Add to Collection

Article Chemistry, Applied

A robust interphase via in-situ pre-reconfiguring lithium anode surface for long-term lithium-oxygen batteries

Pan Xu et al.

Summary: This study successfully improves the cycling stability of lithium-oxygen batteries by constructing a sulfur-modified layer on the lithium surface. The resulting inorganics-rich solid-electrolyte interphase (IR-SEI) enables highly reversible and stable lithium plating/stripping reactions, as well as protecting the lithium metal from oxygen corrosion, thereby significantly enhancing the battery's cycling performance.

JOURNAL OF ENERGY CHEMISTRY (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Nitrogen-Doped Amorphous Zn-Carbon Multichannel Fibers for Stable Lithium Metal Anodes

Yongjin Fang et al.

Summary: The use of nitrogen-doped amorphous Zn-carbon multichannel fibers as hosts for lithium accommodation, with lithiophilic nitrogen-doped carbon and functional Zn nanoparticles for preferred deposition sites, reduces local current density, guides uniform lithium deposition, and improves battery efficiency and stability.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Add to Collection

Article Chemistry, Multidisciplinary

A Carbon Foam with Sodiophilic Surface for Highly Reversible, Ultra-Long Cycle Sodium Metal Anode

Xue-Yang Cui et al.

Summary: An oxygen-doped carbon foam (OCF) derived from starch is reported as a promising material for sodium-ion batteries, with the ability to reduce nucleation resistance of sodium metal, provide abundant nucleation sites, and form a more stable SEI layer, leading to stable cycling and high coulombic efficiency. The OCF electrode can maintain stable 2000 cycles at a current density of 10 mA cm(-2) with a coulombic efficiency of 99.83%, and the Na@OCF||Na3V2(PO4)(3) full cell also shows high capacity retention over 150 cycles. These results provide a simple and effective method for achieving the safety and commercialization of sodium metal anodes.

ADVANCED SCIENCE (2021)

Add to Collection

Article Chemistry, Physical

3D Ag@C Cloth for Stable Anode Free Sodium Metal Batteries

Hui Wang et al.

Summary: A 3D Ag@C natrophilic substrate has been developed to serve as a safer anode-free sodium metal anode (SMA) in sodium ion batteries (SIBs). The substrate demonstrates superior sodium plating/stripping cycling stability and enables uniform sodium deposition, leading to improved safety and performance in SIBs. Additionally, a full battery based on Ag@C and Prussian white exhibits high Coulomb efficiency, rate capability and long-term cycling life, showing the potential for anode-free SIBs with enhanced safety and cost efficiency.

SMALL METHODS (2021)

Add to Collection

Article Chemistry, Physical

Hierarchical ZnO nanorod arrays grown on copper foam as an advanced three-dimensional skeleton for dendrite-free sodium metal anodes

Wu Yang et al.

Summary: Na metal is considered as a potential anode material for next-generation batteries, but its practical applications are limited due to dendrite growth and volume changes. In this study, a 3D Cu foam skeleton with hierarchical ZnO nanorod arrays was developed as a stable host for dendrite-free Na metal anodes. The sodiophilic ZnO nanorod arrays provided abundant nucleation sites for Na, resulting in homogeneous nucleation and uniform growth on the electrode, leading to dendrite-free morphology and excellent cycling stability.

NANO ENERGY (2021)

Add to Collection

Review Chemistry, Physical

Prospects of Electrode Materials and Electrolytes for Practical Potassium-Based Batteries

Ling Fan et al.

Summary: This review focuses on high-performance electrode materials and electrolytes for potassium-ion batteries (PIBs), evaluating their potential and challenges for market penetration. Discussions include the current status of PIBs in terms of safety, energy density, power density, cyclability, and sustainability, as well as future research directions for electrode materials, electrolytes, and electrode-electrolyte interfaces in order to commercialize potassium-based full batteries in the near future.

SMALL METHODS (2021)

Add to Collection

Review Chemistry, Physical

Recent advances in semimetallic pnictogen (As, Sb, Bi) based anodes for sodium-ion batteries: Structural design, charge storage mechanisms, key challenges and perspectives

Samrat Sarkar et al.

Summary: This paper reviews the recent progress in semimetallic pnictogens as alloying anodes and their compounds mainly as conversion-alloying anodes, presenting various debatable sodiation mechanisms and proposing research directions to address existing challenges and perspectives.

NANO RESEARCH (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Critical effects of electrolyte recipes for Li and Na metal batteries

Xueying Zheng et al.

Summary: This paper discusses the critical effects of electrolyte design on the stability of Li/Na metal batteries, reviews the working mechanism of fluoroethylene carbonate (FEC) and the controversial role of LiF, and proposes strategies for further development based on a thorough discussion of these effects.

CHEM (2021)

Add to Collection

Article Engineering, Environmental

Enabling high-performance sodium metal anode via a presodiated alloy-induced interphase

Siyuan Liu et al.

Summary: This study utilizes a heterogeneous interfacial layer to optimize cycling stability, achieving satisfactory coulombic efficiency and stable sodium plating/stripping cycling through presodiation process and microflower substrate to help reduce nucleation overpotential.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Chemistry, Physical

A Lithium-Metal Anode with Ultra-High Areal Capacity (50 mAh cm-2) by Gridding Lithium Plating/Stripping

Pan Xu et al.

Summary: By using a functionalized framework and a phosphorized copper mesh as a support skeleton, a lithium anode with excellent performance and practical application significance has been achieved, addressing the issues encountered during Li plating/stripping process in lithium metal batteries.

ENERGY STORAGE MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

A highly reversible sodium metal anode by mitigating electrodeposition overpotential

Pan Xu et al.

Summary: Phosphorizing treatment was used to create a sodiophilic phosphorized copper mesh as a current collector for metallic sodium hosting, resulting in improved electrodeposition efficiency and behavior for sodium plating/stripping.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Knocking down the kinetic barriers towards fast-charging and low-temperature sodium metal batteries

Xueying Zheng et al.

Summary: This study demonstrates the development of a high-voltage Na/Na3V2(PO4)(2)O2F battery that can withstand temperatures as low as -30 degrees Celsius and fast charging up to 30C. By utilizing a weakly solvated electrolyte and a biphasic artificial SEI, the researchers have successfully achieved low-temperature and fast-charging performances for sodium metal batteries. The design strategy highlights the importance of de-solvation and SEI control in overcoming kinetic barriers under extreme conditions.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Add to Collection

Article Engineering, Environmental

A honeycomb-like nitrogen-doped carbon as high-performance anode for potassium-ion batteries

Junpeng Li et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Review Nanoscience & Nanotechnology

Designing solid-state electrolytes for safe, energy-dense batteries

Qing Zhao et al.

NATURE REVIEWS MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Embedding a percolated dual-conductive skeleton with high sodiophilicity toward stable sodium metal anodes

Xueying Zheng et al.

NANO ENERGY (2020)

Add to Collection

Review Chemistry, Physical

Anodes and Sodium-Free Cathodes in Sodium Ion Batteries

Xuming Yang et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

N-doped interconnected carbon aerogels as an efficient SeS2 host for long life Na-SeS2 batteries

Yurui Deng et al.

NANO RESEARCH (2020)

Add to Collection

Article Chemistry, Physical

Ultrastable All-Solid-State Sodium Rechargeable Batteries

Jing Yang et al.

ACS ENERGY LETTERS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Ion-Solvent Chemistry-Inspired Cation-Additive Strategy to Stabilize Electrolytes for Sodium-Metal Batteries

Xiang Chen et al.

CHEM (2020)

Add to Collection

Article Chemistry, Physical

High reversible Li plating and stripping by in-situ construction a multifunctional lithium-pinned array

Pan Xu et al.

ENERGY STORAGE MATERIALS (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Solid Electrolyte Interphases on Sodium Metal Anodes

Changyuan Bao et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

3D uniform nitrogen-doped carbon skeleton for ultra-stable sodium metal anode

Ben Liu et al.

NANO RESEARCH (2020)

Add to Collection

Article Chemistry, Physical

Interfacial design principle of sodiophilicity-regulated interlayer deposition in a sandwiched sodium metal anode

Xin Jin et al.

ENERGY STORAGE MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Affinity-engineered carbon nanofibers as a scaffold for Na metal anodes

Alessandro Susca et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Review Chemistry, Physical

Advanced carbon nanostructures for future high performance sodium metal anodes

Caiyun Ma et al.

ENERGY STORAGE MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Dendrite-free all-solid-state lithium batteries with lithium phosphorous oxynitride-modified lithium metal anode and composite solid electrolytes

Chunhua Wang et al.

NANO RESEARCH (2019)

Add to Collection

Article Chemistry, Physical

Flame-retardant quasi-solid polymer electrolyte enabling sodium metal batteries with highly safe characteristic and superior cycling stability

Jinfeng Yang et al.

NANO RESEARCH (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Stable Na Metal Anode Enabled by a Reinforced Multistructural SEI Layer

Zhixin Xu et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Add to Collection

Article Multidisciplinary Sciences

Homogeneous guiding deposition of sodium through main group II metals toward dendrite-free sodium anodes

Mengqi Zhu et al.

SCIENCE ADVANCES (2019)

Add to Collection

Article Chemistry, Physical

A stable artificial protective layer for high capacity dendrite-free lithium metal anode

Zhipeng Wen et al.

NANO RESEARCH (2019)

Add to Collection

Article Multidisciplinary Sciences

Sustainability-inspired cell design for a fully recyclable sodium ion battery

Tiefeng Liu et al.

NATURE COMMUNICATIONS (2019)

Add to Collection

Review Chemistry, Multidisciplinary

Developments and Perspectives on Emerging High-Energy-Density Sodium-Metal Batteries

Yunxiao Wang et al.

CHEM (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Boosting the Reversibility of Sodium Metal Anode via Heteroatom-Doped Hollow Carbon Fibers

Xueying Zheng et al.

SMALL (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Revealing an Interconnected Interfacial Layer in Solid-State Polymer Sodium Batteries

Chenglong Zhao et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)

Add to Collection

Article Chemistry, Multidisciplinary

A Sodiophilic Interphase-Mediated, Dendrite-Free Anode with Ultrahigh Specific Capacity for Sodium-Metal Batteries

Lei Ye et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Mega High Utilization of Sodium Metal Anodes Enabled by Single Zinc Atom Sites

Tingzhou Yang et al.

NANO LETTERS (2019)

Add to Collection

Article Multidisciplinary Sciences

Cross-linked beta alumina nanowires with compact gel polymer electrolyte coating for ultra-stable sodium metal battery

Danni Lei et al.

NATURE COMMUNICATIONS (2019)

Add to Collection

Article Chemistry, Physical

Binding ZnO nanorods in reduced graphene oxide via facile electrochemical method for Na-ion battery

Mingjun Jing et al.

APPLIED SURFACE SCIENCE (2019)

Add to Collection

Article Materials Science, Ceramics

Atomic layer deposited-ZnO@3D-Ni-foam composite for Na-ion battery anode: A novel route for easy and efficient electrode preparation

Soumyadeep Sinha et al.

CERAMICS INTERNATIONAL (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Prevention of dendrite growth and volume expansion to give high-performance aprotic bimetallic Li-Na alloy-O-2 batteries

Jin-ling Ma et al.

NATURE CHEMISTRY (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Stable Na Plating and Stripping Electrochemistry Promoted by In Situ Construction of an Alloy-Based Sodiophilic Interphase

Shuai Tang et al.

ADVANCED MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Dendrite-tamed deposition kinetics using single-atom Zn sites for Li metal anode

Kangli Xu et al.

ENERGY STORAGE MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Uniform nucleation of sodium in 3D carbon nanotube framework via oxygen doping for long-life and efficient Na metal anodes

Chenxiao Chu et al.

ENERGY STORAGE MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

A Chemically Engineered Porous Copper Matrix with Cylindrical Core-Shell Skeleton as a Stable Host for Metallic Sodium Anodes

Chuanlong Wang et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

A robust 3D host for sodium metal anodes with excellent machinability and cycling stability

Wan-Sheng Xiong et al.

CHEMICAL COMMUNICATIONS (2018)

Add to Collection

Article Chemistry, Physical

A room-temperature sodium metal anode enabled by a sodiophilic layer

Shuai Tang et al.

NANO ENERGY (2018)

Add to Collection

Article Chemistry, Physical

Highly dispersed Zn nanoparticles confined in a nanoporous carbon network: promising anode materials for sodium and potassium ion batteries

Chunliu Yan et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Lightweight, Thin, and Flexible Silver Nanopaper Electrodes for High-Capacity Dendrite-Free Sodium Metal Anodes

Zhaohui Wang et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Honeycomb-like porous 3D nickel electrodeposition for stable Li and Na metal anodes

Yaolin Xu et al.

ENERGY STORAGE MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Porous Al Current Collector for Dendrite-Free Na Metal Anodes

Shan Liu et al.

NANO LETTERS (2017)

Add to Collection

Review Chemistry, Physical

Challenges and perspectives on high and intermediate-temperature sodium batteries

Karina B. Hueso et al.

NANO RESEARCH (2017)

Add to Collection

Review Nanoscience & Nanotechnology

Reviving the lithium metal anode for high-energy batteries

Dingchang Lin et al.

NATURE NANOTECHNOLOGY (2017)

Add to Collection

Article Electrochemistry

Rhombic Dodecahedron ZIF-8 Precursor: Designing Porous N-Doped Carbon for Sodium-Ion Batteries

Yang Liu et al.

CHEMELECTROCHEM (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Stable Na plating/stripping electrochemistry realized by a 3D Cu current collector with thin nanowires

Yanying Lu et al.

CHEMICAL COMMUNICATIONS (2017)

Add to Collection

Article Chemistry, Physical

Ammonia-treated porous carbon derived from ZIF-8 for enhanced CO2 adsorption

Xiancheng Ma et al.

APPLIED SURFACE SCIENCE (2016)

Add to Collection

Article Chemistry, Multidisciplinary

A novel synergistic composite with multi-functional effects for high-performance Li-S batteries

Yi-Juan Li et al.

ENERGY & ENVIRONMENTAL SCIENCE (2016)

Add to Collection

Article Multidisciplinary Sciences

NiO-PTA supported on ZIF-8 as a highly effective catalyst for hydrocracking of Jatropha oil

Jing Liu et al.

SCIENTIFIC REPORTS (2016)

Add to Collection

Article Multidisciplinary Sciences

Bimetallic Metal-Organic Frameworks for Controlled Catalytic Graphitization of Nanoporous Carbons

Jing Tang et al.

SCIENTIFIC REPORTS (2016)

Add to Collection

Article Chemistry, Multidisciplinary

From Bimetallic Metal-Organic Framework to Porous Carbon: High Surface Area and Multicomponent Active Dopants for Excellent Electrocatalysis

Yu-Zhen Chen et al.

ADVANCED MATERIALS (2015)

Add to Collection

Review Chemistry, Multidisciplinary

Towards greener and more sustainable batteries for electrical energy storage

D. Larcher et al.

NATURE CHEMISTRY (2015)

Add to Collection

Article Multidisciplinary Sciences

High-throughput synthesis of zeolitic imidazolate frameworks and application to CO2 capture

Rahul Banerjee et al.

SCIENCE (2008)

Add to Collection

© Peeref 2019-2024. All rights reserved.