☆ 4.8 Article

Realizing High Utilization of High-Mass-Loading Sulfur Cathode via Electrode Nanopore Regulation

NANO LETTERS (2022)

Related references

Note: Only part of the references are listed.

Article Chemistry, Multidisciplinary

Packing Sulfur Species by Phosphorene-Derived Catalytic Interface for Electrolyte-Lean Lithium-Sulfur Batteries

Jiangqi Zhou et al.

Summary: Utilizing a hermetic catalytic interface constructed by phosphorene/graphene heterostructure enables rapid LiPS conversion and slow LiPS migration, effectively promoting sulfur redox reactions in lithium-sulfur batteries under lean electrolyte conditions.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Low Tortuosity and Reinforced Concrete Type Ultra-Thick Electrode for Practical Lithium-sulfur Batteries

Zhilong Han et al.

Summary: The study introduces a unique LRCS structure for ultra-thick, high-capacity and stable cycling sulfur cathodes in Li-S batteries, enabling fast kinetics and strengthened electrode integrity. This new design leads to a high capacity retention of 80.8% over 140 cycles and a calculated energy density of 390 Wh kg(-1), providing guidance for practical Li-S battery development.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Freestanding and Sandwich MXene-Based Cathode with Suppressed Lithium Polysulfides Shuttle for Flexible Lithium-Sulfur Batteries

Xiongwei Zhong et al.

Summary: This paper reports a method of preparing large-area MXene film through drop-casting, and using this film to improve the adhesion and capacity retention of lithium-sulfur batteries. At the same time, titanium oxide anchored on MXene was prepared by oxidation treatment, which further promotes lithium ion transport and prevents the shuttle effect of lithium polysulfides.

NANO LETTERS (2022)

Add to Collection

Article Chemistry, Physical

Uniformly Controlled Treble Boundary Using Enriched Adsorption Sites and Accelerated Catalyst Cathode for Robust Lithium-Sulfur Batteries

Rongrong Chu et al.

Summary: This study enhances the adsorption ability and reaction rate of high order lithium polysulfides in lithium-sulfur batteries by designing a heterostructure, leading to excellent rate performance and long-term stability.

ADVANCED ENERGY MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

An encapsulating lithium-polysulfide electrolyte for lithium-sulfur batteries

Li-Peng Hou et al.

Summary: This study proposes an encapsulating LiPS electrolyte (EPSE) to suppress parasitic reactions between lithium metal anodes and soluble LiPS based on a nano-heterogeneous solvation structure design. The addition of reduction-stable DIPS in the outer solvent shell significantly inhibits the parasitic reactions between encapsulated LiPS and lithium metal. Experimental results show that a lithium-sulfur battery with EPSE can undergo 103 cycles under demanding conditions.

CHEM (2022)

Add to Collection

Article Energy & Fuels

Formulating energy density for designing practical lithium-sulfur batteries

Guangmin Zhou et al.

Summary: The authors analyze key Li-S cell parameters, propose an energy density calculation, and discuss the design targets for practical high-performance Li-S batteries.

NATURE ENERGY (2022)

Add to Collection

Article Chemistry, Physical

Polaron hopping-mediated dynamic interactive sites boost sulfur chemistry for flexible lithium-sulfur batteries

Liqun Niu et al.

Summary: Developing flexible and robust sulfur cathodes is crucial for high energy density flexible Li-S batteries. Researchers have reported an all-electrochemically active hybrid sulfur cathode by integrating nest-like O-defective RuO2 with sulfur, achieving good flexibility, durability, and energy density. Moreover, dynamic interactive sites are formed in this system, accelerating Li-S chemistry.

ENERGY STORAGE MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Constructing Heterogeneous Structure in Metal-Organic Framework-Derived Hierarchical Sulfur Hosts for Capturing Polysulfides and Promoting Conversion Kinetics

Yingbo Xiao et al.

Summary: The Bi/Bi2O3 heterostructure within the metal-organic framework-derived sulfur host effectively mitigates the shuttle effects of LiPSs in lithium-sulfur batteries, leading to significantly optimized performance in terms of discharge capacity, cycle life, and areal capacity.

ACS NANO (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Array-Structured Double-Ion Cooperative Adsorption Sites as Multifunctional Sulfur Hosts for Lithium-Sulfur Batteries with Low Electrolyte/Sulfur Ratio

Junling Guo et al.

Summary: A Na2Ti6O13 (NTO) nanowire array is developed to address the problems caused by low electrolyte/sulfur ratio (E/S) in lithium-sulfur batteries (LSBs), such as shuttle effect and limited sulfur utilization. NTO exhibits accelerated conversion of polysulfides, enhanced adsorption, improved electron transport, and increased sulfur utilization, leading to high cycle life and shelf-life at low E/S. The array materials with cooperative multi-ion adsorption sites show promise as hosts for LSBs.

ACS NANO (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Engineering d-p Orbital Hybridization in Single-Atom Metal-Embedded Three-Dimensional Electrodes for Li-S Batteries

Zhiyuan Han et al.

Summary: The study reveals that the d-p orbital hybridization between single-atom metals and sulfur species can serve as a descriptor for understanding the catalytic activity of SACs in Li-S batteries. Transition metals with lower atomic numbers, such as titanium, have been found to effectively bind lithium polysulfides and catalyze their electrochemical reaction. Single-atom metal catalysts embedded in three-dimensional electrodes prepared through a nitrogen coordination approach show high catalytic activity and low catalyst loading for improved sulfur utilization in Li-S batteries.

ADVANCED MATERIALS (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Strategy of Enhancing the Volumetric Energy Density for Lithium-Sulfur Batteries

Ya-Tao Liu et al.

Summary: This review focuses on the challenges and key factors in improving the volumetric energy density of lithium-sulfur batteries, proposes strategies for overcoming these challenges, and discusses key technologies for improving performance by enhancing the cathode materials.

ADVANCED MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Isolated Single-Atom Ni-N5 Catalytic Site in Hollow Porous Carbon Capsules for Efficient Lithium-Sulfur Batteries

Shaolong Zhang et al.

Summary: By constructing a multifunctional catalyst of isolated single-atom nickel in hollow nitrogen-doped porous carbon (Ni-N-5/HNPC), the performance of lithium-sulfur batteries has been successfully enhanced, including improved electrical conductivity, enhanced physical-chemical restriction capability towards lithium polysulfides, and boosted redox reaction kinetics.

NANO LETTERS (2021)

Add to Collection

Article Chemistry, Physical

Hypercrosslinked Polymerization Enabled N-Doped Carbon Confined Fe2O3 Facilitating Li Polysulfides Interface Conversion for Li-S Batteries

Yun Lu et al.

Summary: This study successfully improved the performance of lithium-sulfur batteries by confining Fe2O3 nanocrystals in N-doped carbon material, creating dual active sites and enhancing the chemisorption and interface conversion ability of Li polysulfides, leading to high mass capacity and excellent cycling stability.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Mesoporous carbon nanomaterials with tunable geometries and porous structures fabricated by a surface-induced assembly strategy

Shuibin Tu et al.

Summary: The study presents a surface-induced assembly strategy to fabricate mesoporous carbon (MC) nanomaterials with controllable morphologies and porous structures. These MC materials exhibit excellent energy storage performance in flexible sulfur electrodes and supercapacitors, showing great potential for various energy storage applications.

ENERGY STORAGE MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Manipulating Redox Kinetics of Sulfur Species Using Mott-Schottky Electrocatalysts for Advanced Lithium-Sulfur Batteries

Yuanjian Li et al.

Summary: The study presents a Co@NC heterostructure as a Mott-Schottky catalyst to enhance sulfur electrochemistry in lithium-sulfur batteries, improving energy efficiency and performance under high-sulfur-loading and lean-electrolyte conditions.

NANO LETTERS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Semi-Flooded Sulfur Cathode with Ultralean Absorbed Electrolyte in Li-S Battery

Yong Xie et al.

ADVANCED SCIENCE (2020)

Add to Collection

Article Multidisciplinary Sciences

Supercooled liquid sulfur maintained in three-dimensional current collector for high-performance Li-S batteries

Guangmin Zhou et al.

SCIENCE ADVANCES (2020)

Add to Collection

Article Chemistry, Applied

Interface enhanced well -dispersed Co 9 S 8 nanocrystals as an efficient polysulfide host in lithium?sulfur batteries

Xue Liu et al.

JOURNAL OF ENERGY CHEMISTRY (2020)

Add to Collection

Article Chemistry, Physical

Fast conversion and controlled deposition of lithium (poly)sulfides in lithium-sulfur batteries using high-loading cobalt single atoms

Yuanjian Li et al.

ENERGY STORAGE MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Rational design of polar/nonpolar mediators toward efficient sulfur fixation and enhanced conductivity

Zihe Chen et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Article Energy & Fuels

Intercalation-conversion hybrid cathodes enabling Li-S full-cell architectures with jointly superior gravimetric and volumetric energy densities

Weijiang Xue et al.

NATURE ENERGY (2019)

Add to Collection

Article Multidisciplinary Sciences

Cathode porosity is a missing key parameter to optimize lithium-sulfur battery energy density

Ning Kang et al.

NATURE COMMUNICATIONS (2019)

Add to Collection

Editorial Material Energy & Fuels

Less pore equals more

Arumugam Manthiram et al.

NATURE ENERGY (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Uniform Mesoporous MnO2 Nanospheres as a Surface Chemical Adsorption and Physical Confinement Polysulfide Mediator for Lithium-Sulfur Batteries

Shuibin Tu et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Review Chemistry, Applied

Recent progress on confinement of polysulfides through physical and chemical methods

Sheng-Yi Li et al.

JOURNAL OF ENERGY CHEMISTRY (2018)

Add to Collection

Article Chemistry, Multidisciplinary

A Polysulfide-Immobilizing Polymer Retards the Shuttling of Polysulfide Intermediates in Lithium-Sulfur Batteries

Shuibin Tu et al.

ADVANCED MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Facilitation of sulfur evolution reaction by pyridinic nitrogen doped carbon nanoflakes for highly-stable lithium-sulfur batteries

Huadong Yuan et al.

ENERGY STORAGE MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Exploiting a robust biopolymer network binder for an ultrahigh-areal-capacity Li-S battery

Jie Liu et al.

ENERGY & ENVIRONMENTAL SCIENCE (2017)

Add to Collection

Article Chemistry, Physical

Efficient Activation of Li2S by Transition Metal Phosphides Nanoparticles for Highly Stable Lithium-Sulfur Batteries

Huadong Yuan et al.

ACS ENERGY LETTERS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Robust, Ultra-Tough Flexible Cathodes for High-Energy Li-S Batteries

Sheng-Heng Chung et al.

SMALL (2016)

Add to Collection

Review Chemistry, Multidisciplinary

Designing high-energy lithium-sulfur batteries

Zhi Wei Seh et al.

CHEMICAL SOCIETY REVIEWS (2016)

Add to Collection

Article Multidisciplinary Sciences

Balancing surface adsorption and diffusion of lithium-polysulfides on nonconductive oxides for lithium-sulfur battery design

Xinyong Tao et al.

NATURE COMMUNICATIONS (2016)

Add to Collection

Article Chemistry, Physical

A High Energy Lithium-Sulfur Battery with Ultrahigh-Loading Lithium Polysulfide Cathode and its Failure Mechanism

Long Qie et al.

ADVANCED ENERGY MATERIALS (2016)

Add to Collection

Article Multidisciplinary Sciences

Pie-like electrode design for high-energy density lithium-sulfur batteries

Zhen Li et al.

NATURE COMMUNICATIONS (2015)

Add to Collection

Article Chemistry, Physical

High Energy Density Lithium-Sulfur Batteries: Challenges of Thick Sulfur Cathodes

Dongping Lv et al.

ADVANCED ENERGY MATERIALS (2015)

Add to Collection

Review Chemistry, Physical

Li-O2 and Li-S batteries with high energy storage

Peter G. Bruce et al.

NATURE MATERIALS (2012)

Add to Collection

© Peeref 2019-2024. All rights reserved.