☆ 4.6 Review

MXenes as Emerging Materials: Synthesis, Properties, and Applications

MOLECULES (2022)

Related references

Note: Only part of the references are listed.

Article Chemistry, Multidisciplinary

Exfoliation and Delamination of Ti3C2Tx MXene Prepared via Molten Salt Etching Route

Liyuan Liu et al.

Summary: This study reports a successful method for exfoliating MS-Ti3C2Tx, resulting in a self-supported chlorinated MXene film, through intercalation of the organic molecule TBAOH and sonication. The experimental results show that tuning the surface chemistry of MXene has a significant impact on electrochemical performance, leading to improved specific capacity and rate capability in Li-ion battery application.

ACS NANO (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Simplified Synthesis of Fluoride-Free Ti3C2Tx via Electrochemical Etching toward High- Performance Electrochemical Capacitors

Jizhang Chen et al.

Summary: A facile and time-saving electrochemical etching method is developed to synthesize F-free and Cl-containing Ti3C2Tx. Sonification alone is able to delaminate Ti3C2Tx without using any hazardous organic intercalant. The obtained Ti3C2Tx flakes exhibit suitable size and stability, and show excellent performance in supercapacitors and hybrid capacitors.

ACS NANO (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Advanced strategies in Metal-Organic Frameworks for CO2 Capture and Separation

Muhammad Usman et al.

Summary: The article summarizes the most advanced strategies adopted in metal-organic frameworks for CO2 capture and separation, and discusses their role and advancements in CO2 mitigation.

CHEMICAL RECORD (2022)

Add to Collection

Article Energy & Fuels

Effect of MXene Loaded on g-C3N4 Photocatalyst for the Photocatalytic Degradation of Methylene Blue

Muhammad Syahmi Irfan Nasri et al.

Summary: This study successfully synthesized MXene/g-C3N4 heterostructure photocatalysts with different loading amounts of MXene and found that the 1% loading achieved efficient dye degradation. The improvement was attributed to the intimate interfacial contact and larger BET surface area. However, excessive loading of MXene weakened the photocatalytic activity.

ENERGIES (2022)

Add to Collection

Article Chemistry, Physical

Highly-efficient visible-light-driven photocatalytic H2 evolution integrated with microplastic degradation over MXene/ZnxCd1-xS photocatalyst

Bingqian Cao et al.

Summary: In this study, a series of MXene/ZnxCd1-xS photocatalysts were successfully fabricated for H-2 evolution integrated with degradation of polyethylene terephthalate (PET). The photocatalysts exhibited excellent photocatalytic performance, converting PET into useful organic micro molecules while achieving high H-2 evolution rates.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

Add to Collection

Review Chemistry, Analytical

2D MXenes: Synthesis, properties, and electrochemical energy storage for supercapacitors-A review

Mutawara Mahmood Baig et al.

Summary: Supercapacitors, compared to conventional dielectric capacitors, offer higher energy storage capacities but lower than secondary batteries. MXenes, as a family of materials with high surface area and conductivity, significantly enhance the energy storage characteristics of supercapacitors.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2022)

Add to Collection

Article Engineering, Electrical & Electronic

Highly selective NH3 gas sensor based on polypyrrole/Ti3C2Tx nanocomposites operating at room temperature

Pu Chen et al.

Summary: Semiconducting nanomaterials with different sizes and shapes have wide applications in electronics. Recombination of different materials, such as the nanocomposites of polypyrrole (PPy) and MXene, can significantly improve their performance. In this study, PPy/MXene nanocomposites were prepared by a simple in situ polymerization reaction. The sensors made from these nanocomposites showed higher gas sensitivities to ammonia compared to pure PPy and MXene, with excellent selectivity and low detection limit. These findings demonstrate the practicality of PPy/MXene nanocomposites for Internet of Things (IoT) applications.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2022)

Add to Collection

Review Chemistry, Organic

A Review of Preparation Methods for Heterogeneous Catalysts

Israf Ud Din et al.

Summary: Catalysts play a significant role in the industrial revolution by improving reaction rates and reducing production costs. Extensive research has been conducted on various industrial catalysts in recent decades, with the performance of catalysts being influenced by factors such as synthesis methods. This review provides an overview of the most common methods used for synthesizing supported catalysts, including detailed explanations of the background, principles, mechanisms, advantages, limitations, and applications of each method.

MINI-REVIEWS IN ORGANIC CHEMISTRY (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Photocatalytic removal of benzene over Ti3C2Tx MXene and TiO2-MXene composite materials under solar and NIR irradiation

Sergii A. Sergiienko et al.

Summary: MXenes, a family of 2D transition metal carbides, nitrides and carbonitrides, show potential for energy conversion and photocatalysis. While individual MXenes' activity is debated, they are effective co-catalysts. Growing TiO2 on MXene sheets is a mainstream approach, but a study prepared TiO2-MXene composites using different methods.

JOURNAL OF MATERIALS CHEMISTRY C (2022)

Add to Collection

Review Chemistry, Physical

Recent Progress in the Synthesis and Applications of Composite Photocatalysts: A Critical Review

Muhammad Humayun et al.

Summary: Photocatalysis is an advanced technique that converts solar energy into sustainable fuels and oxidizes pollutants with semiconductor photocatalysts. The challenges for effective photocatalysis include the stability and efficiency of semiconductor photocatalysts. Researchers are making progress in developing highly efficient and stable photocatalysts through the design of various semiconductor composite photocatalysts.

SMALL METHODS (2022)

Add to Collection

Review Nanoscience & Nanotechnology

Titanium Carbide MXene Nanostructures as Catalysts and Cocatalysts for Photocatalytic Fuel Production: A Review

Muhammad Tahir et al.

Summary: This review focuses on the utilization of titanium carbide (Ti3C2Tx) MXenes as efficient nanomaterials in photocatalytic applications for solar energy conversion. The synthesis routes, surface functionalization, and cocatalysts construction of Ti3C2Tx MXenes are discussed. Various synthesis approaches and morphologies of Ti3C2Tx MXenes are systematically described, along with their effects on energy conversion reactions. The fabrication of Ti3C2Tx MXene-based nanocomposites for enhanced photocatalytic efficiency with solar energy is also elaborated on. Additionally, challenges and further developments in the synthesis and production of renewable fuels are presented.

ACS APPLIED NANO MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Achieving highly efficient pH-universal hydrogen evolution by superhydrophilic amorphous/crystalline Rh(OH)3/NiTe coaxial nanorod array electrode

Huachuan Sun et al.

Summary: This research reports a unique structure consisting of nickel tellurium nanorods enclosed by rhodium hydroxide, which is synthesized through a chemical process. The structure exhibits superhydrophilicity and aerophobicity, enabling efficient hydrogen electrocatalytic reactions in alkaline, neutral, and acidic media. The findings provide insights for the design of high-performance electrocatalysts.

APPLIED CATALYSIS B-ENVIRONMENTAL (2022)

Add to Collection

Article Chemistry, Physical

Rational design of Ti3C2/carbon nanotubes/MnCo2S4 electrodes for symmetric supercapacitors with high energy storage

Alei Dang et al.

Summary: This paper focuses on the improvement of electrochemical performance of supercapacitors with high-energy storage by selective electrode materials and rational structural design. The Ti3C2/CNTs/MnCo2S4 composite electrodes were fabricated, which exhibited enhanced specific capacitance, high rate retention, and excellent cycling stability. These improved electrochemical performances were attributed to the synergistic effect of pseudocapative material of MnCo2S4, remarkable conductivity of Ti3C2 and CNTs, and the micro-/nano-porous structures constructed by stacking Ti3C2 flakes with CNTs. The Ti3C2/CNTs/MnCo2S4 electrode-based symmetric supercapacitor also demonstrated a high energy density, indicating the substantial enhancement of Ti3C2-based supercapacitors by rational design and modification.

APPLIED SURFACE SCIENCE (2022)

Add to Collection

Review Materials Science, Ceramics

Recent progress and new perspective of MXene-based membranes for water purification: A review

Gim Pao Lim et al.

Summary: This review provides an up-to-date account on recent progress in MXene-based membranes, including synthesis, properties, preparation, and applications. The results demonstrate that MXene-based membranes have great potential in water treatment and organic pollutant removal.

CERAMICS INTERNATIONAL (2022)

Add to Collection

Review Chemistry, Multidisciplinary

A Review on SAPO-34 Zeolite Materials for CO2 Capture and Conversion

Muhammad Usman et al.

Summary: SAPO-34 zeolite, with its distinct chemical structure and pore size distribution, plays an important role in CO2 capture and separation. This review summarizes its applications in CO2 recycling, utilization, and conversion and discusses the associated challenges and future directions.

CHEMICAL RECORD (2022)

Add to Collection

Article Environmental Sciences

Flexible and high-sensitivity sensor based on Ti3C2-MoS2 MXene composite for the detection of toxic gases

Van Thuan Le et al.

Summary: In this study, a Ti3C2-MoS2 composite with high sensitivity and cyclic response curves to dangerous gases at room temperature was created using 2D MXenes and MoS2 materials. The composite demonstrated a significant dependence on NO2 concentration and also showed reaction signals to other hazardous gases.

CHEMOSPHERE (2022)

Add to Collection

Review Energy & Fuels

Recent advances in MXene as electrocatalysts for sustainable energy generation: A review on surface engineering and compositing of MXene

Himadri Tanaya Das et al.

Summary: Electrocatalysis plays a crucial role in sustainable energy-economy development, but the shortage of catalysts has been a hindrance. MXenes, with characteristics like hydrophilicity, superior conductivity, and facile processing techniques, are recommended as excellent electrocatalysts. This article illustrates important synthesis strategies, applications, and pros and cons of MXenes, and encourages researchers from different scientific fields to contribute to expand this research.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Challenges and opportunities in tailoring MAX phases as a starting materials for MXenes development

Jaroslaw Wozniak et al.

Summary: There are numerous parameters to consider when designing 2D MXene, some essential for specific morphology and others crucial for purity and surface chemistry. The method of synthesizing the MAX phase ultimately determines the efficiency and feasibility of MXene synthesis. Achieving repeatability in MXene materials with consistent properties is a significant challenge that requires special attention in the future.

MATERIALS TECHNOLOGY (2022)

Add to Collection

Review Chemistry, Applied

Perovskite-type lanthanum ferrite based photocatalysts: Preparation, properties, and applications

Muhammad Humayun et al.

Summary: This article discusses the use of LaFeO3 as a photocatalyst in addressing solar energy conversion and environmental purification. It focuses on the characteristics, applications, and strategies for enhancing the activity of LaFeO3.

JOURNAL OF ENERGY CHEMISTRY (2022)

Add to Collection

Article Materials Science, Multidisciplinary

MXene-Polymer Hybrid for High-Performance Gas Sensor Prepared by Microwave-Assisted In-Situ Intercalation

Jin Zhou et al.

Summary: This study demonstrates a facile method to prepare a hybrid of Ti3C2Tx and intercalated polysquaraine through microwave-assisted in situ polymerization, which exhibits a good sensing performance for NH3 detection based on gas sensors.

ADVANCED MATERIALS TECHNOLOGIES (2022)

Add to Collection

Review Chemistry, Multidisciplinary

MXene chemistry, electrochemistry and energy storage applications

Xinliang Li et al.

Summary: The diverse and tunable surface and bulk chemistry of MXenes have valuable and distinctive properties that can be utilized in various components of energy storage devices such as electrodes, electrolytes, and separators. They enhance stability and performance through ion storage, transfer regulation, steric hindrance, and electrocatalytic functions.

NATURE REVIEWS CHEMISTRY (2022)

Add to Collection

Review Energy & Fuels

The future of energy materials: A case of MXenes-carbon dots nanocomposites

Elias E. Elemike et al.

Summary: This review paper explores the synthesis and energy applications of MXenes and carbon dots in a nanocomposite form. MXenes are new and interesting materials with unique properties, while carbon dots have gained attention for their biocompatibility and low toxicity. Both materials have surface groups that allow for flexibility in machining. Their nanocomposite materials are expected to have enhanced properties. The formation of composites between carbon dots and MXenes is particularly interesting for energy purposes. These materials could be used in various energy applications such as fuel cells and batteries due to their stability and conductivity. MXene-carbon dots nanocomposites are expected to demonstrate higher efficiency and durability compared to other materials.

JOURNAL OF ENERGY STORAGE (2022)

Add to Collection

Review Biochemistry & Molecular Biology

Recent Progress of SAPO-34 Zeolite Membranes for CO2 Separation: A Review

Muhammad Usman

Summary: This mini-review summarizes the role of SAPO-34 zeolite membranes in CO2 separation and discusses their potential in removing CO2 from air and natural gas. The study provides significant developments and future ideas for the use of SAPO-34 membranes, aiming to mitigate greenhouse gas emissions.

MEMBRANES (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Recent advances on MXene based materials for energy storage applications

M. Q. Long et al.

Summary: Transition metal nitride, carbide and carbonitride (MXenes) as two-dimensional materials have great potential in energy storage systems. However, their low capacity, unsatisfactory yield and self-stacking limit their practical applications. Effective strategies need to be developed to improve their performance.

MATERIALS TODAY SUSTAINABILITY (2022)

Add to Collection

Review Chemistry, Inorganic & Nuclear

Design strategy for MXene and metal chalcogenides/oxides hybrids for supercapacitors, secondary batteries and electro/photocatalysis

Xinlong Liu et al.

Summary: MXenes, as newly discovered 2D materials since 2011, show great potential in energy storage and conversion due to their exceptional electrical conductivity, large surface areas, variety in composition, and flexibility. Hybridizing MXene with functional materials can prevent restacking and introduce synergistic functionalities. This review comprehensively discusses the application of MXene/transition metal chalcogenide (TMC) or MXene/transition metal oxide (TMO) hybrids in supercapacitors, secondary batteries, and electrocatalysis.

COORDINATION CHEMISTRY REVIEWS (2022)

Add to Collection

Review Green & Sustainable Science & Technology

Application of MXenes for air purification, gas separation and storage: A review

Fuhar Dixit et al.

Summary: MXenes are a new type of 2D inorganic compound with high surface area, chemical stability, thermal conductivity, hydrophilicity, and environmental compatibility. They have been widely used in environmental, chemical, and medical applications, particularly in air purification and gas storage, showing superior performance compared to traditional materials.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2022)

Add to Collection

Review Engineering, Environmental

Recent advances in Two-dimensional Ti3C2Tx MXene for flame retardant polymer materials

Wenhua Chen et al.

Summary: MXenes, as a new family of two-dimensional nanomaterials, have shown great potential in flame retardant composites due to their metal-like conductivity, diverse surface chemistry and solution processability. This review provides the latest research progress on flame retardant composites using neat MXenes, functionalized MXenes and synergistic systems based on MXenes and other components. The efficiency and modification strategies of MXenes-based flame retardants are discussed, with a focus on the working mechanisms in different matrices. Furthermore, flame retardant MXenes-based composites also exhibit multiple functions such as EMI shielding, thermal conductivity and electro-/photo-thermal conversion, leading to wider applications in high-end fields.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Review Environmental Sciences

Potential of MXene-based membranes in water treatment and desalination: A critical review

Ihsanullah Ihsanullah et al.

Summary: This review critically assessed the recent advances in MXene-based membranes for the development of novel membranes, with a focus on synthesis routes and applications in water treatment and desalination. MXene-based membranes have demonstrated excellent potential in removing pollutants and separating oil/water, but there are still many limitations.

CHEMOSPHERE (2022)

Add to Collection

Article Engineering, Electrical & Electronic

Recent progress in Ti3C2Tx-based materials: From fundamentals to emerging applications

Zeeshan Haider Jaffari et al.

Summary: This study provides a comprehensive review of 2D titanium carbide, including its synthesis, applications in energy and environmental fields, and potential practical applications. The results demonstrate that 2D titanium carbide has great potential as a promising alternative to graphene in various energy and environmental applications.

MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING (2022)

Add to Collection

Review Engineering, Environmental

A review of metal-organic frameworks/graphitic carbon nitride composites for solar-driven green H2 production, CO2 reduction, and water purification

Muhammad Usman et al.

Summary: Population growth and economic development have led to an increase in the consumption of fossil fuel energy resources, resulting in serious environmental implications. Photocatalysis plays a crucial role in sustainable energy development and environmental remediation. Graphitic carbon nitride (g-C3N4) and metal-organic frameworks (MOFs) composites have significant importance in green energy production and environmental pollution control.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2022)

Add to Collection

Article Chemistry, Multidisciplinary

MXene-Copper/Cobalt Hybrids via Lewis Acidic Molten Salts Etching for High Performance Symmetric Supercapacitors

Yang Bai et al.

Summary: MXenes have been studied for their potential as supercapacitors due to their conductivity, density, and hydrophilic nature. Ti3C2-Cu/Co hybrids were synthesized and characterized, showing promising pseudocapacitive behavior and stability for applications in supercapacitors. This work provides insights into the design and application of MXene-based materials for energy storage devices.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Add to Collection

Article Chemistry, Physical

Enhanced NO2 gas-sensing performance of 2D Ti3C2/TiO2 nanocomposites by in-situ formation of Schottky barrier

Siwei Liu et al.

Summary: In this study, Ti3C2/TiO2 nanocomposites were synthesized through in-situ growth of TiO2 on the surface of multilayer Ti3C2 MXene, showing improved response to NO2 gas and excellent gas-sensing performance. The formation of a Schottky barrier at the Ti3C2/TiO2 interface contributed to the outstanding response and selectivity of the composites. This work provides a simple method to enhance the gas-sensing performance of MXene materials in practical applications.

APPLIED SURFACE SCIENCE (2021)

Add to Collection

Review Energy & Fuels

A Review of Supercapacitors: Materials Design, Modification, and Applications

Muhammad Yaseen et al.

Summary: This article reviews the advantages, types, synthesis strategies, and functionalization methods of supercapacitors, providing insights for individuals not directly involved in electrochemical energy storage research.

ENERGIES (2021)

Add to Collection

Article Chemistry, Multidisciplinary

3D Porous Oxidation-Resistant MXene/Graphene Architectures Induced by In Situ Zinc Template toward High-Performance Supercapacitors

Xue Yang et al.

Summary: A fast and efficient self-assembly route was demonstrated to prepare a 3D porous oxidation-resistant MXene/graphene composite, which effectively prevents the oxidation and self-restacking of MXene, ensuring outstanding electrical conductivity, specific capacitance, and cycling stability. This work paves a new avenue to solve the long-standing challenges of MXene.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Materials Science, Ceramics

Improvement of gas sensing property for two-dimensional Ti3C2Tx treated with oxygen plasma by microwave energy excitation

Ming Hou et al.

Summary: Ti3C2Tx activated at 500 degrees C exhibited excellent gas-sensing properties at room temperature to 100 ppm ethanol with a value of 22.47, attributed to the enhancement of the amount of oxygen functional groups and defects on the MXene Ti3C2Tx film. The enhancement of ethanol-sensing performance demonstrated that the activated Ti3C2Tx possess great potential in gas sensing.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Chemistry, Multidisciplinary

A High-Performance Asymmetric Supercapacitor Based on Tungsten Oxide Nanoplates and Highly Reduced Graphene Oxide Electrodes

Muhammad Ashraf et al.

Summary: Tungsten oxide/graphene hybrid materials are promising semiconductors for energy-related applications. An asymmetric supercapacitor (ASC, HRG//m-WO3 ASC) fabricated from m-WO3 nanoplates and HRG shows high specific capacitance, energy density, and cycling stability.

CHEMISTRY-A EUROPEAN JOURNAL (2021)

Add to Collection

Review Energy & Fuels

Preparation, Functionalization, Modification, and Applications of Nanostructured Gold: A Critical Review

Muhammad Yaseen et al.

Summary: Gold nanoparticles play a significant role in science and technology due to their unique properties and potential applications. Various approaches for synthesis, modification and functionalization of nanostructured gold have been discussed in detail in this review. Modification and functionalization of nanostructured gold have shown to enhance catalytic performance, summarizing various methods for better catalytic outcomes.

ENERGIES (2021)

Add to Collection

Review Chemistry, Multidisciplinary

MXenes: Synthesis, Optical Properties, and Applications in Ultrafast Photonics

Bo Fu et al.

Summary: MXenes, as a novel 2D material, have outstanding properties and potential applications in various fields. This review focuses on the synthesis, optical properties, and applications of MXenes in ultrafast lasers, covering preparation methods, optical characteristics, and typical ultrafast pulsed lasers enabled by MXene-based saturable absorbers.

SMALL (2021)

Add to Collection

Article Chemistry, Physical

Progress in layered cathode and anode nanoarchitectures for charge storage devices: Challenges and future perspective

Ibrahim Khan et al.

Summary: The morphological and structural characteristics of material play pivotal roles in energy storage and conversion applications. Layered nanoarchitectures based electrodes have gained special consideration for their superior electrochemical characteristics and flexible stacking nature, providing slit-shaped channels for fast ion diffusion. Ongoing research focuses on utilizing layered materials, particularly layered metal oxides, carbon-based materials, and metal chalcogenides, to improve energy storage performance.

ENERGY STORAGE MATERIALS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Three-Dimensional Self-Supporting Ti3C2 with MoS2 and Cu2O Nanocrystals for High-Performance Flexible Supercapacitors

Xiaoqi Mao et al.

Summary: A facile method for fabricating 3D self-supporting Ti3C2 with MoS2 and Cu2O nanocrystal composites for supercapacitor applications was developed in this study, showing excellent performance. The composite electrode exhibited a synergistic effect between Ti3C2, MoS2, and Cu2O, enhancing the specific capacitance and cycling stability of the supercapacitor.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Materials Science, Ceramics

In2O3 nanocubes/Ti3C2Tx MXene composites for enhanced methanol gas sensing properties at room temperature

Miao Liu et al.

Summary: In this study, In2O3 nanocubes/Ti3C2Tx MXene nanocomposites were successfully synthesized and showed high response and prominent selectivity to methanol at room temperature. The composites exhibited excellent detection performance, fast response/recovery times, good linearity, and outstanding repeatability.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Chemistry, Physical

In situ polymerized polyaniline/MXene (V2C) as building blocks of supercapacitor and ammonia sensor self-powered by electromagnetic-triboelectric hybrid generator

Xingwei Wang et al.

Summary: This study demonstrates the in situ polymerization of PANI/MXene composites for supercapacitor and ammonia sensor applications, powered by an electromagnetic-triboelectric hybrid generator. The PANI/MXene materials show high performance in terms of capacitance, energy density, and sensor response, making them promising candidates for self-powered gas sensing in industrial and agricultural settings.

NANO ENERGY (2021)

Add to Collection

Review Energy & Fuels

Bismuth-Graphene Nanohybrids: Synthesis, Reaction Mechanisms, and Photocatalytic Applications-A Review

Muhammad Usman et al.

Summary: This review summarizes the applications of bismuth-graphene nanohybrids in photocatalysis, including the synthetic processes, fundamental mechanisms, heterogeneous photocatalysis, benefits, and challenges, covering several key applications in energy conversion and environmental pollution control.

ENERGIES (2021)

Add to Collection

Review Energy & Fuels

Structural Characteristics and Environmental Applications of Covalent Organic Frameworks

Niaz Ali Khan et al.

Summary: Covalent organic frameworks (COFs) are crystalline polymeric materials with highly ordered and uniform pores, offering immense opportunities in various fields through pre-designed pore sizes, geometries, and functionalities, particularly in the removal of environmentally hazardous substances such as metal ions and chemicals through adsorption and separation.

ENERGIES (2021)

Add to Collection

Review Chemistry, Physical

Advanced Catalysts for Photoelectrochemical Water Splitting

Mohsin Ali Marwat et al.

Summary: This review provides a detailed explanation of the basic mechanism of PEC water splitting using electrocatalysts, and highlights recent advancements in the design, fabrication, and modification of high-efficiency electrocatalysts for energy conversion.

ACS APPLIED ENERGY MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Etching Mechanism of Monoatomic Aluminum Layers during MXene Synthesis

Yong-Jae Kim et al.

Summary: Understanding the etching mechanisms of MXene and the influence of etchants on structural features and defects are crucial for improving MXene properties. This study visualizes the etching behavior of the Ti3AlC2 MAX phase at the atomic scale and reveals the etching mechanism for the first time. Differences in etching behavior among different etchants were also observed.

CHEMISTRY OF MATERIALS (2021)

Add to Collection

Review Energy & Fuels

MXene-Derived Quantum Dots for Energy Conversion and Storage Applications

Bishnupad Mohanty et al.

Summary: The rising family of 2D materials MXene, especially MXene-derived quantum dots (MXQDs), has attracted great scientific interest for their unique properties and potential applications. A lot of research has been conducted on the efficient synthesis and promising applications of MXQDs, particularly in the field of energy conversion and storage. The review highlights both the prospects and challenges in developing MXQDs-based materials for energy-related applications, aiming to pave the way for more innovative research in the future.

ENERGY & FUELS (2021)

Add to Collection

Review Chemistry, Physical

Transition metal sulfides for electrochemical hydrogen evolution

Hamid Ghorbani Shiraz et al.

Summary: Hydrogen is considered the most promising zero-carbon fuel for the future, with the hydrogen evolution reaction attracting significant attention as a critical step in hydrogen technology and economy. Transition metal disulfides have emerged as a potential candidate for promoting hydrogen evolution due to their low cost and engineering versatility, with studies showing that manipulating their structure and morphology can enhance their proton reduction performance.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Add to Collection

Article Engineering, Chemical

Ti3C2 Mxene modified SnNb2O6 nanosheets Schottky photocatalysts with directed internal electric field for tetracycline hydrochloride removal and hydrogen evolution

He Wang et al.

Summary: This study successfully designed and constructed a novel 2D/2D ultrathin Ti3C2 Mxene/SnNb2O6 nanosheets, demonstrating significantly enhanced activity and stability in photocatalysis, with potential applications in pollutant degradation and hydrogen production.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Construction of Few-Layer Ti3C2 MXene and Boron-Doped g-C3N4 for Enhanced Photocatalytic CO2 Reduction

Haiqiang Wang et al.

Summary: The study demonstrates the combination of boron-doped graphitic carbon nitride and few-layer MXene for photocatalytic CO2 conversion, showing significantly higher yields under visible light and excellent stability. Characterizations such as spectroscopy and current-time curves indicate the synergistic effect of boron dopants and MXene addition in enhancing photocatalytic activity.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Electrochemical Reduction of CO2: A Review of Cobalt Based Catalysts for Carbon Dioxide Conversion to Fuels

Muhammad Usman et al.

Summary: This review discusses the recent performance of various cobalt electrocatalysts in electrochemical CO2 reduction reaction (CO2RR) and highlights the challenges and stability of these materials in facilitating the conversion of CO2 to valuable products, as well as future perspectives for efficient CO2RR development.

NANOMATERIALS (2021)

Add to Collection

Review Nanoscience & Nanotechnology

Recent advances of MXenes as electrocatalysts for hydrogen evolution reaction

Saishuai Bai et al.

Summary: MXenes, an emerging two-dimensional transition metal carbides, have shown great potential as electrocatalysts for hydrogen evolution reaction. This comprehensive study summarizes the preparation, applications, and strategies for enhancing the catalytic activity of MXenes, as well as identifying the existing challenges and new opportunities for MXenes-based electrocatalysts.

NPJ 2D MATERIALS AND APPLICATIONS (2021)

Add to Collection

Review Nanoscience & Nanotechnology

Prospects challenges and stability of 2D MXenes for clean energy conversion and storage applications

Anha Bhat et al.

Summary: Two-dimensional material MXene has shown great potential for applications in energy and storage fields due to its remarkable physiochemical properties. However, there are still challenges and limitations in achieving functional MXene with controlled structures and properties for renewable clean energy conversion and storage applications, which require further research and breakthroughs.

NPJ 2D MATERIALS AND APPLICATIONS (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Competing hydrogen evolution reaction: a challenge in electrocatalytic nitrogen fixation

Jiangyue Chen et al.

Summary: Ammonia (NH3) is a vital chemical for humans, but its conventional production by the Haber-Bosch process poses environmental challenges. The electrocatalytic N-2 reduction reaction offers a promising alternative, although competition with the hydrogen evolution reaction (HER) hampers performance. Understanding various NRR mechanisms and methods for enhancing performance is crucial.

MATERIALS CHEMISTRY FRONTIERS (2021)

Add to Collection

Review Energy & Fuels

Advances in MXene Films: Synthesis, Assembly, and Applications

Xiaohua Li et al.

Summary: This review article focuses on the synthesis methods of MXenes, advanced assembly technologies of MXene films, and recent progress in the applications of MXene films in fields such as electrochemical energy storage, membrane separation, and electromagnetic shielding.

TRANSACTIONS OF TIANJIN UNIVERSITY (2021)

Add to Collection

Article Materials Science, Multidisciplinary

MXenes: An Emerging Platform for Wearable Electronics and Looking Beyond

Neng Li et al.

Summary: Wearable devices have potential applications in various fields, but the development of flexible wearable electronics is still in its early stages. MXenes, as wonder materials, have shown promise in energy storage and sensing applications across different research areas.

MATTER (2021)

Add to Collection

Review Engineering, Environmental

CO2 towards fuels: A review of catalytic conversion of carbon dioxide to hydrocarbons

Mustapha D. Garba et al.

Summary: Meeting the ever-increasing global energy demands is a serious challenge of the 21st century, with one solution being the conversion of CO2 into hydrocarbon fuels. Utilizing heterogeneous catalysis with zeolite and non-zeolite based catalysts, as well as noble and transition metals, can lead to the production of high value-added HC fuels from CO2. This review article emphasizes the importance of research and technological advancements in this area for both industries and academia.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)

Add to Collection

Article Materials Science, Ceramics

Synthesis and photocatalytic H2-production activity of plasma-treated Ti3C2Tx MXene modified graphitic carbon nitride

Fang Xu et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Porous MXenes: Synthesis, structures, and applications

Fanxing Bu et al.

NANO TODAY (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Ultrasound-Driven Two-Dimensional Ti3C2Tx MXene Hydrogel Generator

Kang Hyuck Lee et al.

ACS NANO (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Electromagnetic Shielding of Monolayer MXene Assemblies

Taeyeong Yun et al.

ADVANCED MATERIALS (2020)

Add to Collection

Review Chemistry, Multidisciplinary

A mini-review on MXenes as versatile substrate for advanced sensors

Razium Ali Soomro et al.

CHINESE CHEMICAL LETTERS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

MXenes-A new class of 2D layered materials: Synthesis, properties, applications as supercapacitor electrode and beyond

Sandhya Venkateshalu et al.

APPLIED MATERIALS TODAY (2020)

Add to Collection

Article Chemistry, Multidisciplinary

2D Titanium Carbide (Ti3C2Tx) in Accommodating Intraocular Lens Design

Emma J. Ward et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Scalable Manufacturing of Free-Standing, Strong Ti3C2Tx MXene Films with Outstanding Conductivity

Jizhen Zhang et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Ultrathin ZnIn2S4 Nanosheets Anchored on Ti3C2TX MXene for Photocatalytic H2 Evolution

Gancheng Zuo et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Rational Design of Porous N-Ti3C2 MXene@CNT Microspheres for High Cycling Stability in Li-S Battery

Jianli Wang et al.

NANO-MICRO LETTERS (2020)

Add to Collection

Article Materials Science, Ceramics

Solvothermal synthesis of in situ nitrogen-doped Ti3C2 MXene fluorescent quantum dots for selective Cu2+ detection

Yefeng Feng et al.

CERAMICS INTERNATIONAL (2020)

Add to Collection

Review Chemistry, Physical

Synthesis of Tungsten Disulfide and Molybdenum Disulfide Quantum Dots and Their Applications

Wenxu Yin et al.

CHEMISTRY OF MATERIALS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Electrical and Elastic Properties of Individual Single-Layer Nb4C3Tx MXene Flakes

Alexey Lipatov et al.

ADVANCED ELECTRONIC MATERIALS (2020)

Add to Collection

Review Materials Science, Multidisciplinary

MXene-based photocatalysts

Panyong Kuang et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)

Add to Collection

Article Multidisciplinary Sciences

Nanohybrids of a MXene and transition metal dichalcogenide for selective detection of volatile organic compounds

Winston Yenyu Chen et al.

NATURE COMMUNICATIONS (2020)

Add to Collection

Article Chemistry, Physical

Facile Heterogeneously Catalyzed Nitrogen Fixation by MXenes

Jose D. Gouveia et al.

ACS CATALYSIS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

2D/2D Heterojunction of R-scheme Ti3C2 MXene/MoS2 Nanosheets for Enhanced Photocatalytic Performance

Ziyu Yao et al.

NANOSCALE RESEARCH LETTERS (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Unveiling Fabrication and Environmental Remediation of MXene-Based Nanoarchitectures in Toxic Metals Removal from Wastewater: Strategy and Mechanism

Yassmin Ibrahim et al.

NANOMATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Enhancing N2Fixation Activity by Converting Ti3C2MXenes Nanosheets to Nanoribbons

Hua Wei et al.

CHEMSUSCHEM (2020)

Add to Collection

Article Chemistry, Physical

Photocatalytic solar fuel production and environmental remediation through experimental and DFT based research on CdSe-QDs-coupled P-doped-g-C3N4 composites

Fazal Raziq et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2020)

Add to Collection

Article Chemistry, Physical

Promoting visible-light photocatalytic activities for carbon nitride based 0D/2D/2D hybrid system: Beyond the conventional 4-electron mechanism

Fazal Raziq et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2020)

Add to Collection

Article Chemistry, Physical

2D/2D Ti3C2 MXene/g-C3N4 nanosheets heterojunction for high efficient CO2 reduction photocatalyst: Dual effects of urea

Chao Yang et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2020)

Add to Collection

Article Energy & Fuels

MoS2 Quantum Dots as Efficient Electrocatalyst for Hydrogen Evolution Reaction over a Wide pH Range

Bishnupad Mohanty et al.

ENERGY & FUELS (2020)

Add to Collection

Review Chemistry, Multidisciplinary

The Recent Advances in the Mechanical Properties of Self-Standing Two-Dimensional MXene-Based Nanostructures: Deep Insights into the Supercapacitor

Yassmin Ibrahim et al.

NANOMATERIALS (2020)

Add to Collection

Article Engineering, Environmental

Taking MXenes from the lab to commercial products

Christopher E. Shuck et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Article Chemistry, Physical

MXenes: New Horizons in Catalysis

Angel Morales-Garcia et al.

ACS CATALYSIS (2020)

Add to Collection

Review Materials Science, Multidisciplinary

Two-Dimensional Transition Metal Carbides and Nitrides (MXenes): Synthesis, Properties, and Electrochemical Energy Storage Applications

Chuanfang (John) Zhang et al.

ENERGY & ENVIRONMENTAL MATERIALS (2020)

Add to Collection

Review Materials Science, Multidisciplinary

Interfacial structure design of MXene-basednanomaterials for electrochemical energy storage and conversion

Jianmin Luo et al.

INFOMAT (2020)

Add to Collection

Article Chemistry, Physical

Quantifying the rigidity of 2D carbides (MXenes)

Tao Hu et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Highly green fluorescent Nb2C MXene quantum dots

Quan Xu et al.

CHEMICAL COMMUNICATIONS (2020)

Add to Collection

Article Chemistry, Physical

Synthesis of an MXene/polyaniline composite with excellent electrochemical properties

Huizhong Xu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Review Chemistry, Physical

Two-dimensional transition metal carbide and nitride (MXene) derived quantum dots (QDs): synthesis, properties, applications and prospects

Binbin Shao et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Review Chemistry, Physical

MXene and MXene-based composites: synthesis, properties and environment-related applications

Xiaoxue Zhan et al.

NANOSCALE HORIZONS (2020)

Add to Collection

Article Chemistry, Physical

Excellent oxidation resistive MXene aqueous ink for micro-supercapacitor application

Chien-Wei Wu et al.

ENERGY STORAGE MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Oxygen-Functionalized Ultrathin Ti3C2Tx MXene for Enhanced Electrocatalytic Hydrogen Evolution

Yanan Jiang et al.

CHEMSUSCHEM (2019)

Add to Collection

Review Materials Science, Multidisciplinary

Recent advances in MXenes: From fundamentals to applications

Mohammad Khazaei et al.

CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2019)

Add to Collection

Article Chemistry, Multidisciplinary

2D Early Transition Metal Carbides (MXenes) for Catalysis

Zhe Li et al.

SMALL (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Synthesis of Ti3C2/TiO2 heterostructure by microwave heating with high electrochemical performance

Zijiong Li et al.

MATERIALS RESEARCH EXPRESS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Demonstration of a White Laser with V2C MXene-Based Quantum Dots

Dapeng Huang et al.

ADVANCED MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

High-Temperature Behavior and Surface Chemistry of Carbide MXenes Studied by Thermal Analysis

Mykola Seredych et al.

CHEMISTRY OF MATERIALS (2019)

Add to Collection

Review Chemistry, Multidisciplinary

Surface Modified MXene-Based Nanocomposites for Electrochemical Energy Conversion and Storage

Hong Yu et al.

SMALL (2019)

Add to Collection

Review Materials Science, Ceramics

Synthesis, structure, properties and applications of MXenes: Current status and perspectives

Rodrigo Mantovani Ronchi et al.

CERAMICS INTERNATIONAL (2019)

Add to Collection

Article Electrochemistry

Two-dimensional V4C3 MXene as high performance electrode materials for supercapacitors

Xin Wang et al.

ELECTROCHIMICA ACTA (2019)

Add to Collection

Article Chemistry, Physical

Two-Dimensional Transition Metal MXene-Based Photocatalysts for Solar Fuel Generation

Lei Cheng et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Two-Dimensional Vanadium Carbide MXene for Gas Sensors with Ultrahigh Sensitivity Toward Nonpolar Gases

Eunji Lee et al.

ACS SENSORS (2019)

Add to Collection

Article Engineering, Manufacturing

3D Ti3C2Tx MXene/C hybrid foam/epoxy nanocomposites with superior electromagnetic interference shielding performances and robust mechanical properties

Lei Wang et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Plate-to-Layer Bi2MoO6/MXene-Heterostructured Anode for Lithium-Ion Batteries

Peng Zhang et al.

NANO-MICRO LETTERS (2019)

Add to Collection

Review Chemistry, Applied

Recent progress towards mild-condition ammonia synthesis

Qianru Wang et al.

JOURNAL OF ENERGY CHEMISTRY (2019)

Add to Collection

Review Chemistry, Multidisciplinary

Rational Design of Flexible Two-Dimensional MXenes with Multiple Functionalities

Zhongheng Fu et al.

CHEMICAL REVIEWS (2019)

Add to Collection

Review Chemistry, Analytical

Ammonia gas sensors: A comprehensive review

Dongwook Kwak et al.

TALANTA (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Hypoxia-Irrelevant Photonic Thermodynamic Cancer Nanomedicine

Huijing Xiang et al.

ACS NANO (2019)

Add to Collection

Article Chemistry, Physical

Propene Adsorption-Chemisorption Behaviors on H-SAPO-34 Zeolite Catalysts at Different Temperatures

Muhammad Usman et al.

CATALYSTS (2019)

Add to Collection

Article Chemistry, Physical

Multiwall carbon nanotubes loaded with MoS2 quantum dots and MXene quantum dots: Non-Pt bifunctional catalyst for the methanol oxidation and oxygen reduction reactions in alkaline solution

Xinli Yang et al.

APPLIED SURFACE SCIENCE (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Ti3C2 MXene-Based Sensors with High Selectivity for NH3 Detection at Room Temperature

Meng Wu et al.

ACS SENSORS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Magnesium doped carbon quantum dots synthesized by mechanical ball milling and displayed Fe3+ sensing

Yuwan Han et al.

MATERIALS TECHNOLOGY (2019)

Add to Collection

Review Chemistry, Physical

Review of MXenes as new nanomaterials for energy storage/delivery and selected environmental applications

Byung-Moon Jun et al.

NANO RESEARCH (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Electrochromic Effect in Titanium Carbide MXene Thin Films Produced by Dip-Coating

Pol Salles et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Add to Collection

Review Chemistry, Physical

Photodetectors Based on Two-Dimensional Materials and Their van der Waals Heterostructures

Li Jiayi et al.

ACTA PHYSICO-CHIMICA SINICA (2019)

Add to Collection

Article Chemistry, Applied

Controllable design of Zn-Ni-P on g-C3N4 for efficient photocatalytic hydrogen production

Yanbing Li et al.

CHINESE JOURNAL OF CATALYSIS (2019)

Add to Collection

Review Chemistry, Multidisciplinary

Applications of 2D MXenes in energy conversion and storage systems

Jinbo Pang et al.

CHEMICAL SOCIETY REVIEWS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Selective electroreduction of dinitrogen to ammonia on a molecular iron phthalocyanine/O-MWCNT catalyst under ambient conditions

Fanfan Xu et al.

CHEMICAL COMMUNICATIONS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

2D/2D heterojunction of Ti3C2/g-C3N4 nanosheets for enhanced photocatalytic hydrogen evolution

Tongming Su et al.

NANOSCALE (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Highly fluorescent Ti3C2 MXene quantum dots for macrophage labeling and Cu2+ ion sensing

Qingwen Guan et al.

NANOSCALE (2019)

Add to Collection

Article Chemistry, Physical

Inhibition of AlF3•3H2O Impurity Formation in Ti3C2Tx MXene Synthesis under a Unique CoFx/HCl Etching Environment

Cody B. Cockreham et al.

ACS APPLIED ENERGY MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

A Red-Phosphorous-Assisted Ball-Milling Synthesis of Few-Layered Ti3C2Tx (MXene) Nanodot Composite

Tianran Zhang et al.

CHEMNANOMAT (2018)

Add to Collection

Article Chemistry, Multidisciplinary

2D/2D Heterojunction of Ultrathin MXene/Bi2WO6 Nanosheets for Improved Photocatalytic CO2 Reduction

Shaowen Cao et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Surface Nanopore Engineering of 2D MXenes for Targeted and Synergistic Multitherapies of Hepatocellular Carcinoma

Zhenli Li et al.

ADVANCED MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Fluorine-Free Synthesis of High-Purity Ti3C2Tx (T=OH, O) via Alkali Treatment

Tengfei Li et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2018)

Add to Collection

Article Chemistry, Physical

Synthesis of ZnO/Bi-doped porous LaFeO3 nanocomposites as highly efficient nano-photocatalysts dependent on the enhanced utilization of visible-light-excited electrons

Muhammad Humayun et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2018)

Add to Collection

Article Chemistry, Physical

Synthesis of S-Doped porous g-C3N4 by using ionic liquids and subsequently coupled with Au-TiO2 for exceptional cocatalyst-free visible-light catalytic activities

Fazal Raziq et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2018)

Add to Collection

Article Materials Science, Ceramics

A hydrothermal etching route to synthesis of 2D MXene (Ti3C2, Nb2C): Enhanced exfoliation and improved adsorption performance

Chao Peng et al.

CERAMICS INTERNATIONAL (2018)

Add to Collection

Review Chemistry, Multidisciplinary

Recent progress in two-dimensional inorganic quantum dots

Yuanhong Xu et al.

CHEMICAL SOCIETY REVIEWS (2018)

Add to Collection

Article Engineering, Electrical & Electronic

Black Phosphorus: A New Platform for Gaseous Sensing Based on Surface Plasmon Resonance

Triranjita Srivastava et al.

IEEE PHOTONICS TECHNOLOGY LETTERS (2018)

Add to Collection

Article Spectroscopy

Chemical bonding in carbide MXene nanosheets

Martin Magnuson et al.

JOURNAL OF ELECTRON SPECTROSCOPY AND RELATED PHENOMENA (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Direct Assessment of Nanoconfined Water in 2D Ti3C2 Electrode Interspaces by a Surface Acoustic Technique

Netanel Shpigel et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)

Add to Collection

Article Chemistry, Multidisciplinary

High-yield fabrication of Ti3C2Tx MXene quantum dots and their electrochemiluminescence behavior

Yunlong Qin et al.

NANOSCALE (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Ratiometric photoluminescence sensing based on Ti3C2 MXene quantum dots as an intracellular pH sensor

Xu Chen et al.

NANOSCALE (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Tailoring Structure, Composition, and Energy Storage Properties of MXenes from Selective Etching of In-Plane, Chemically Ordered MAX Phases

Ingemar Persson et al.

SMALL (2018)

Add to Collection

Review Chemistry, Multidisciplinary

Adsorptive environmental applications of MXene nanomaterials: a review

Yujuan Zhang et al.

RSC ADVANCES (2018)

Add to Collection

Article Chemistry, Physical

MXene-derived TiO2@C/g-C3N4 heterojunctions for highly efficient nitrogen photofixation

Qiuxia Liu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

Add to Collection

Article Multidisciplinary Sciences

Elastic properties of 2D Ti3C2Tx MXene monolayers and bilayers

Alexey Lipatov et al.

SCIENCE ADVANCES (2018)

Add to Collection

Article Chemistry, Multidisciplinary

MXene Sorbents for Removal of Urea from Dialysate: A Step toward the Wearable Artificial Kidney

Fayan Meng et al.

ACS NANO (2018)

Add to Collection

Correction Chemistry, Multidisciplinary

Two-dimensional transition metal carbides and nitrides (MXenes) for biomedical applications (vol 47, pg 5109, 2018)

Kai Huang et al.

CHEMICAL SOCIETY REVIEWS (2018)

Add to Collection

Article Optics

Preparation of graphene quantum dots through liquid phase exfoliation method

L. Zdrazil et al.

JOURNAL OF LUMINESCENCE (2018)

Add to Collection

Review Chemistry, Multidisciplinary

New opportunities for efficient N-2 fixation by nanosheet photocatalysts

Hao Li et al.

NANOSCALE (2018)

Add to Collection

Article Medicine, Research & Experimental

Therapeutic mesopore construction on 2D Nb2C MXenes for targeted and enhanced chemo-photothermal cancer therapy in NIR-II biowindow

Xiaoxia Han et al.

THERANOSTICS (2018)

Add to Collection

Article Multidisciplinary Sciences

2D titanium carbide (MXene) for wireless communication

Asia Sarycheva et al.

SCIENCE ADVANCES (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Highly Electrically Conductive Three-Dimensional Ti3C2TX MXene/Reduced Graphene Oxide Hybrid Aerogels with Excellent Electromagnetic Interference Shielding Performances

Sai Zhao et al.

ACS NANO (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Molybdenum Carbide Nanodots Enable Efficient Electrocatalytic Nitrogen Fixation under Ambient Conditions

Hui Cheng et al.

ADVANCED MATERIALS (2018)

Add to Collection

Article Electrochemistry

Two-dimensional vanadium carbide (V2C) MXene as electrode for supercapacitors with aqueous electrolytes

Qingmin Shan et al.

ELECTROCHEMISTRY COMMUNICATIONS (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Preparation of Ti3C2Tx MXene-Derived Quantum Dots with White/Blue-Emitting Photoluminescence and Electrochemiluminescence

Gengfang Xu et al.

ADVANCED OPTICAL MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

2D Ti3C2 MXene/WO3 Hybrid Architectures for High-Rate Supercapacitors

Swapnil B. Ambade et al.

ADVANCED MATERIALS INTERFACES (2018)

Add to Collection

Review Chemistry, Physical

Two-dimensional quantum dots: Fundamentals, photoluminescence mechanism and their energy and environmental applications

Quan Xu et al.

MATERIALS TODAY ENERGY (2018)

Add to Collection

Article Chemistry, Physical

Single platinum atoms immobilized on an MXene as an efficient catalyst for the hydrogen evolution reaction

Jinqiang Zhang et al.

NATURE CATALYSIS (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Ultrasmall Mo2C Nanoparticle-Decorated Carbon Polyhedrons for Enhanced Microwave Absorption

Yahui Wang et al.

ACS APPLIED NANO MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Tuning the Basal Plane Functionalization of Two-Dimensional Metal Carbides (MXenes) To Control Hydrogen Evolution Activity

Albertus D. Handoko et al.

ACS APPLIED ENERGY MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Conductive transparent V2CTx (MXene) films

Guobing Ying et al.

FLATCHEM (2018)

Add to Collection

Review Chemistry, Multidisciplinary

Three-Dimensional Architectures Constructed from Transition-Metal Dichalcogenide Nanomaterials for Electrochemical Energy Storage and Conversion

Qinbai Yun et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Stretchable Ti3C2Tx MXene/Carbon Nanotube Composite Based Strain Sensor with Ultrahigh Sensitivity and Tunable Sensing Range

Yichen Cai et al.

ACS NANO (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Theranostic 2D Tantalum Carbide (MXene)

Han Lin et al.

ADVANCED MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

2D MXenes: A New Family of Promising Catalysts for the Hydrogen Evolution Reaction

Guoping Gao et al.

ACS CATALYSIS (2017)

Add to Collection

Article Chemistry, Physical

Two-Dimensional MXenes as Catalysts for Electrochemical Hydrogen Evolution: A Computational Screening Study

Mohnish Pandey et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2017)

Add to Collection

Article Chemistry, Multidisciplinary

A Two-Dimensional Biodegradable Niobium Carbide (MXene) for Photothermal Tumor Eradication in NIR-I and NIR-II Biowindows

Han Lin et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Fluorine-free preparation of titanium carbide MXene quantum dots with high near-infrared photothermal performances for cancer therapy

Xinghua Yu et al.

NANOSCALE (2017)

Add to Collection

Article Chemistry, Physical

A new etching environment (FeF3/HCl) for the synthesis of two-dimensional titanium carbide MXenes: a route towards selective reactivity vs. water

X. Wang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Add to Collection

Review Nanoscience & Nanotechnology

2D metal carbides and nitrides (MXenes) for energy storage

Babak Anasori et al.

NATURE REVIEWS MATERIALS (2017)

Add to Collection

Article Chemistry, Physical

Improved charge separation and surface activation via boron-doped layered polyhedron SrTiO3 for co-catalyst free photocatalytic CO2 conversion

Jingjing Shan et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Theoretical and Experimental Exploration of a Novel In-Plane Chemically Ordered (Cr2/3M1/3)2AIC i-MAX Phase with M = Sc and Y

J. Lu et al.

CRYSTAL GROWTH & DESIGN (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Surface Modified Ti3C2 MXene Nanosheets for Tumor Targeting Photothermal/Photodynamic/Chemo Synergistic Therapy

Gongyuan Liu et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Versatile Cutting Method for Producing Fluorescent Ultrasmall MXene Sheets

Zhiqiang Wang et al.

ACS NANO (2017)

Add to Collection

Article Chemistry, Physical

Guidelines for Synthesis and Processing of Two-Dimensional Titanium Carbide (Ti3C2TX MXene)

Mohamed Alhabeb et al.

CHEMISTRY OF MATERIALS (2017)

Add to Collection

Article Chemistry, Physical

Photogenerated electron modulation to dominantly induce efficient 2,4-dichlorophenol degradation on BiOBr nanoplates with different phosphate modification

Shuangying Chen et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Photoluminescent Ti3C2 MXene Quantum Dots for Multicolor Cellular Imaging

Qi Xue et al.

ADVANCED MATERIALS (2017)

Add to Collection

Article Chemistry, Physical

Improved photoelectrocatalytic activities of BiOCl with high stability for water oxidation and MO degradation by coupling RGO and modifying phosphate groups to prolong carrier lifetime

Zhijun Li et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2017)

Add to Collection

Article Chemistry, Physical

Synthesis of SnO2/B-P codoped g-C3N4 nanocomposites as efficient cocatalyst-free visible-light photocatalysts for CO2 conversion and pollutant degradation

Fazal Raziq et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Interacting Carbon Nitride and Titanium Carbide Nanosheets for High-Performance Oxygen Evolution

Tian Yi Ma et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2016)

Add to Collection

Article Chemistry, Physical

Enhanced visible-light activities of porous BiFeO3 by coupling with nanocrystalline TiO2 and mechanism

Muhammad Humayun et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2016)

Add to Collection

Article Physics, Multidisciplinary

Role of the surface effect on the structural, electronic and mechanical properties of the carbide MXenes

Xian-Hu Zha et al.

EPL (2015)

Add to Collection

Article Chemistry, Physical

Probing the Mechanism of High Capacitance in 2D Titanium Carbide Using In Situ X-Ray Absorption Spectroscopy

Maria R. Lukatskaya et al.

ADVANCED ENERGY MATERIALS (2015)

Add to Collection

Article Multidisciplinary Sciences

A green strategy to construct non-covalent, stable and bioactive coatings on porous MOF nanoparticles

V. Agostoni et al.

SCIENTIFIC REPORTS (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Drug Delivery with PEGylated MoS2 Nano-sheets for Combined Photothermal and Chemotherapy of Cancer

Teng Liu et al.

ADVANCED MATERIALS (2014)

Add to Collection

Article Multidisciplinary Sciences

Conductive two-dimensional titanium carbide 'clay' with high volumetric capacitance

Michael Ghidiu et al.

NATURE (2014)

Add to Collection

Article Chemistry, Multidisciplinary

An extraordinarily stable catalyst: Pt NPs supported on two-dimensional Ti3C2X2 (X = OH, F) nanosheets for oxygen reduction reaction

Xiaohong Xie et al.

CHEMICAL COMMUNICATIONS (2013)

Add to Collection

Article Chemistry, Multidisciplinary

Are MXenes Promising Anode Materials for Li Ion Batteries? Computational Studies on Electronic Properties and Li Storage Capability of Ti3C2 and Ti3C2X2 (X = F, OH) Monolayer

Qing Tang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2012)

Add to Collection

Article Chemistry, Multidisciplinary

Two-Dimensional Nanocrystals Produced by Exfoliation of Ti3AlC2

Michael Naguib et al.

ADVANCED MATERIALS (2011)

Add to Collection

Article Chemistry, Multidisciplinary

Graphene in Mice: Ultrahigh In Vivo Tumor Uptake and Efficient Photothermal Therapy

Kai Yang et al.

NANO LETTERS (2010)

Add to Collection

© Peeref 2019-2024. All rights reserved.