Related references
Note: Only part of the references are listed.Mechanisms of austenite growth during intercritical annealing in medium manganese steels
Rama Srinivas Varanasi et al.
SCRIPTA MATERIALIA (2022)
Effect of Intercritical Annealing on the Microstructure and Mechanical Properties of 0.1C-13Cr-3Ni Martensitic Stainless Steel
Jaka Burja et al.
METALS (2021)
Laboratory- and Semi-Industrial-Scale Thermomechanical Processing of TRIP-Aided Steel with Acicular Ferrite
Adam Skowronek et al.
APPLIED SCIENCES-BASEL (2021)
Austenite formation and cementite dissolution during intercritical annealing of a medium-manganese steel from a martensitic condition
J. J. Mueller et al.
MATERIALS & DESIGN (2021)
The In Situ Observation of Phase Transformations During Intercritical Annealing of a Medium Manganese Advanced High Strength Steel by High Energy X-Ray Diffraction
Xiaohua Hu et al.
FRONTIERS IN MATERIALS (2021)
Reduction of Thermal Expansion of Ferritic/martensitic Heat Resistant Steels -Alloying Effects on Thermal Expansion of α-Fe Phase-
Satoru Kobayashi et al.
ISIJ INTERNATIONAL (2020)
Enhancing the Robustness and Efficiency in the Production of Medium Mn Steels by Al Addition
Maokun Bai et al.
METALS (2020)
Physical simulation and dilatometric study of double-step heat treatment of medium-Mn steel
A. Skowronek et al.
ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2020)
Structure and mechanical properties of dual-phase steel following heat treatment simulations reproducing a continuous annealing line
Krzysztof Radwanski et al.
ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2019)
Fracture mechanisms and microstructure in a medium Mn quenching and partitioning steel exhibiting macrosegregation
J. Hidalgo et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Effect of the heat treatment on the microstructure and mechanical properties of medium-Mn-steels
Reinhold Schneider et al.
MATERIALS SCIENCE AND TECHNOLOGY (2019)
Microstructure evolution during high-temperature partitioning of a medium-Mn quenching and partitioning steel
S. Ayenampudi et al.
MATERIALIA (2019)
Impact of intercritical annealing temperature and strain state on mechanical stability of retained austenite in medium Mn steel
Yong-Gang Yang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Microstructure, Mechanical Properties and Welding of Low Carbon, Medium Manganese TWIP/TRIP Steel
Pavel Podany et al.
METALS (2018)
Influence of Intercritical Annealing Temperature on Microstructure and Mechanical Properties of a Cold-Rolled Medium-Mn Steel
Yan Ma et al.
METALS (2018)
Retained Austenite Decomposition and Carbide Precipitation during Isothermal Tempering of a Medium- Carbon Low-Alloy Bainitic Steel
Seyyed Hesamodin Talebi et al.
MATERIALS (2018)
Effect of Al on the Microstructure and Mechanical Properties of Hot-Rolled Medium-Mn Steel
D. T. Han et al.
THERMEC 2018: 10TH INTERNATIONAL CONFERENCE ON PROCESSING AND MANUFACTURING OF ADVANCED MATERIALS (2018)
Microstructures and Mechanical Properties of 7Mn Steel Manufactured by Different Rolling Processes
Bin Hu et al.
METALS (2017)
Effect of Prior Athermal Martensite on the Isothermal Transformation Kinetics Below Ms in a Low-C High-Si Steel
A. Navarro-Lopez et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2016)
Structural characterization of low-carbon multiphase steels merging advanced research methods with light optical microscopy
K. Radwanski
ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2016)
Impact Toughness of 0.2 Pct C-1.5 Pct Si-(1.5 to 5) Pct Mn Transformation-Induced Plasticity-Aided Steels with an Annealed Martensite Matrix
Hikaru Tanino et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2016)
Influence of Composition and Hot Rolling on the Subsurface Microstructure and Bendability of Ultrahigh-Strength Strip
Antti Juhani Kaijalainen et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2016)
Mechanism of Austenite Formation from Spheroidized Microstructure in an Intermediate Fe-0.1C-3.5Mn Steel
Qingquan Lai et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2016)
An introduction to medium-Mn steel: Metallurgy, mechanical properties and warm stamping process
Y. Chang et al.
MATERIALS & DESIGN (2016)
NON-METALLIC INCLUSIONS AND HOT-WORKING BEHAVIOUR OF ADVANCED HIGH-STRENGTH MEDIUM-Mn STEELS
A. Grajcar et al.
ARCHIVES OF METALLURGY AND MATERIALS (2016)
Effects of Aluminium on the Microstructure and Mechanical Properties in 0.2C-5Mn Steels under Different Heat Treatment Conditions
Haifeng Xu et al.
ISIJ INTERNATIONAL (2015)
The effects of heating/cooling rate on the phase transformations and thermal expansion coefficient of C-Mn as-cast steel at elevated temperatures
Zhang Jian et al.
JOURNAL OF MATERIALS RESEARCH (2015)
Effects of retained austenite volume fraction, morphology, and carbon content on strength and ductility of nanostructured TRIP-assisted steels
Y. F. Shen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Current opinion in medium manganese steel
Y. -K. Lee et al.
MATERIALS SCIENCE AND TECHNOLOGY (2015)
EMPIRICAL FORMULAE FOR THE CALCULATION OF AUSTENITE SUPERCOOLED TRANSFORMATION TEMPERATURES
J. Trzaska
ARCHIVES OF METALLURGY AND MATERIALS (2015)
The effects of the initial martensite microstructure on the microstructure and tensile properties of intercritically annealed Fe-9Mn-0.05C steel
Jeongho Han et al.
ACTA MATERIALIA (2014)
Microstructural analysis of martensite constituents in quenching and partitioning steels
M. J. Santofimia et al.
MATERIALS CHARACTERIZATION (2014)
Effect of fresh martensite on the stability of retained austenite in quenching and partitioning steel
Dorien De Knijf et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
A Dilatometric Study of the Phase Transformations in 300 and 350 Maraging Steels During Continuous Heating Rates
Leandro Gomes de Carvalho et al.
MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS (2013)
Austenite stabilization through manganese enrichment
Emmanuel De Moor et al.
SCRIPTA MATERIALIA (2011)
High temperature X-ray diffraction studies of the sample heating units
Cheng-xi Hu et al.
INTERNATIONAL CONFERENCE ON ADVANCES IN ENGINEERING 2011 (2011)
Evaluation of the Crystallographic Orientation Relationships between FCC and BCC Phases in TRIP Steels
Kim Verbeken et al.
ISIJ INTERNATIONAL (2009)
Advanced high strength steels for automotive industry: a review
R. Kuziak et al.
ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2008)
Effects of morphology and stability of retained austenite on the ductility of TRIP-aided bainitic steels
Francisca G. Caballero et al.
ISIJ INTERNATIONAL (2008)
Uncertainties in dilatometric determination of martensite start temperature
Hong-Seok Yang et al.
MATERIALS SCIENCE AND TECHNOLOGY (2007)
EBSD image quality mapping
SI Wright et al.
MICROSCOPY AND MICROANALYSIS (2006)
Thermal stability of retained austenite in TRIP steels studied by synchrotron X-ray diffraction during cooling
NH van Dijk et al.
ACTA MATERIALIA (2005)
Dilatometric study of reaustenitisation of high silicon bainitic steels:: Decomposition of retained austenite
FG Caballero et al.
MATERIALS TRANSACTIONS (2005)
Image quality analysis: A new method of characterizing microstructures
JH Wu et al.
ISIJ INTERNATIONAL (2005)
Modelling of kinetics of austenite formation in steels with different initial microstructures
FG Caballero et al.
ISIJ INTERNATIONAL (2001)