☆ 4.4 Article

Shear rupture mechanism and dissipation phenomena in bias-extension test of pantographic sheets: Numerical modeling and experiments

MATHEMATICS AND MECHANICS OF SOLIDS (2022)

Related references

Note: Only part of the references are listed.

Article Mechanics

Static and dynamic mechanical behaviors of cracked Mindlin plates in ordinary state-based peridynamic framework

M. J. Dai et al.

Summary: An ordinary state-based peridynamic (PD) model based on the Mindlin plate theory is presented to deal with fracture mechanics problems. The displacement extrapolation method is used to evaluate static and dynamic stress resultant intensity factors. However, the accuracy of the displacement field near crack surfaces is significantly affected by the PD surface effect. Therefore, the arbitrary horizon domain method is adopted to correct the surface effect. Several numerical examples show that the PD Mindlin plate model incorporated with the arbitrary horizon domain method effectively minimizes the influence of the PD surface effect and provides an effective approach to evaluate static and dynamic moment intensity factors.

ACTA MECHANICA (2022)

Add to Collection

Article Thermodynamics

A new deformation measure for micropolar plates subjected to in-plane loads

Gabriele La Valle et al.

Summary: This study analyzes the effect of a new deformation measure on the response of 2D plates and proposes a method to distinguish the energetic contribution of different deformation mechanisms. Analysis of 2D samples with complex geometries using the finite element method and parametric analyses are performed to test the role of material constants in the new constitutive laws. Explore both isotropic and orthotropic models in the study.

CONTINUUM MECHANICS AND THERMODYNAMICS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Out-of-plane deformation reduction via inelastic hinges in fibrous metamaterials and simplified damage approach

Mario Spagnuolo et al.

Summary: The mechanical behavior of fibrous metamaterials is determined by interactions between fibers, which can be direct or mediated by hinges. The torsional stiffness of inelastic hinges can affect out-of-plane deformations in shear tests, potentially leading to permanent deformations after reaching a certain threshold. Damage in the continuum model is introduced to simplify the treatment of this phenomenon.

MATHEMATICS AND MECHANICS OF SOLIDS (2022)

Add to Collection

Article Mechanics

Piola transformations in second-gradient continua

Simon R. Eugster et al.

Summary: This paper investigates the properties and transformation relationships of second-gradient continua and their internal virtual work functionals. Piola transformation formulae are derived, providing the relationships between Lagrangian and Eulerian fields necessary for the formulation of the Principle of Virtual Work. The transformations for stress, double-stress, and external virtual work functionals compatible with second-gradient internal work functionals are derived. These transformations include the transformations for contact surface and line forces, as well as contact surface double-forces.

MECHANICS RESEARCH COMMUNICATIONS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Are higher-gradient models also capable of predicting mechanical behavior in the case of wide-knit pantographic structures?

Mario Spagnuolo et al.

Summary: Numerical simulations and experimental comparisons show that the second-gradient continuum model is applicable for analyzing wide-knit pantographic structures, with good agreement between predicted results and measured data.

MATHEMATICS AND MECHANICS OF SOLIDS (2021)

Add to Collection

Article Engineering, Multidisciplinary

An implicit G1-conforming bi-cubic interpolation for the analysis of smooth and folded Kirchhoff-Love shell assemblies

L. Greco et al.

Summary: This study presents a quadrilateral bi-cubic G(1)-conforming finite element for analyzing Kirchhoff-Love shell assemblies based on rational Gregory interpolation. The interpolation method allows independent control of side rotations of element boundaries and implicit G(1)-conformity of deformation. By introducing new degrees of freedom and additional constraints, the proposed shell element demonstrates accuracy and robustness in numerical investigations.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2021)

Add to Collection

Article Engineering, Multidisciplinary

A non-linear symmetric G1-conforming Bezier finite element formulation for the analysis of Kirchhoff beam assemblies

L. Greco et al.

Summary: The formulation presented in the study addresses Kirchhoff constraints and G(1)-continuity conditions for slender space curved rods and rod assemblies. It is developed in tensorial coordinate free form and involves a symmetric tangent stiffness operator obtained through the second covariant derivative of the internal energy functional. The G(1)-continuity conditions are met through a change of basis, resulting in a specific geometric term in the tangent stiffness matrix. The robustness and accuracy of the Kirchhoff model are demonstrated using numerical examples with Bezier interpolation.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2021)

Add to Collection

Article Mechanics

Two layers pantographs: A 2D continuum model accounting for the beams' offset and relative rotations as averages in SO(3) Lie groups

Ivan Giorgio et al.

Summary: The pantographic architecture shows significant potential in synthesizing metamaterials, allowing for large macroscopic elongations while remaining within the elastic regime. This is achieved through the design of two arrays of beams interconnected by small cylinders with different behaviors.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2021)

Add to Collection

Article Engineering, Mechanical

A generalized class of uniaxial rate-independent models for simulating asymmetric mechanical hysteresis phenomena

Nicole Vaiana et al.

Summary: This article extends a class of rate-independent models to simulate complex asymmetric mechanical hysteresis phenomena. The novel formulation allows for evaluation of generalized force by solving a scalar equation and using only one history variable, demonstrated through specific instances such as the Asymmetric Bilinear and Exponential Models. The potential accuracy and computational efficiency of these models are illustrated using the Asymmetric Exponential Model.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2021)

Add to Collection

Article Mathematics, Applied

Inverse analysis of metamaterials and parameter determination by means of an automatized optimization problem

Navid Shekarchizadeh et al.

Summary: A novel parameter determination technique is developed for material models in continuum mechanics aimed at describing metamaterials. An automatized optimization process is developed specifically for obtaining metamaterials parameters, which aims at minimizing a mechanically meaningful error function. The parameter identification procedure is tested for an exemplary extension experiment of a metamaterial, proving to be robust and reliable.

ZAMM-ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND MECHANIK (2021)

Add to Collection

Article Thermodynamics

A numerical survey of nonlinear dynamical responses of discrete pantographic beams

Emilio Turco

Summary: This study focuses on the dynamic response of materials and structures based on pantographic cells, adding to the existing literature which has mainly focused on static cases. By utilizing a simple spring mechanical model and addressing the nonlinear equilibrium problem, this research thoroughly discusses frequency-response curves for significant cases, contributing to a better understanding of the mechanical peculiarities of pantographic beams.

CONTINUUM MECHANICS AND THERMODYNAMICS (2021)

Add to Collection

Article Engineering, Civil

Nonlocal elasticity theory for lateral stability analysis of tapered thin-walled nanobeams with axially varying materials

Masoumeh Soltani et al.

Summary: The lateral-torsional buckling behavior of functionally graded non-local beams with a tapered I-section was investigated using an innovative methodology. The study derived governing equations based on nonlocal elasticity theory and energy method, and used the differential quadrature method to determine buckling loads. The research findings can serve as benchmarks for further studies on nanoscale tapered thin-walled beams.

THIN-WALLED STRUCTURES (2021)

Add to Collection

Article Thermodynamics

Contact interactions in complex fibrous metamaterials A proposal for elastic energy and Rayleigh dissipation potential

Mario Spagnuolo et al.

Summary: This work proposes an extension of the strain energy for fibrous metamaterials to account for contact, relative scrolling, and dissipation due to friction between the fibers, modeled by introducing placement fields, coupling terms, interdistance considerations, and Rayleigh dissipation potential.

CONTINUUM MECHANICS AND THERMODYNAMICS (2021)

Add to Collection

Article Mechanics

Higher order theories for the vibration study of doubly-curved anisotropic shells with a variable thickness and isogeometric mapped geometry

Francesco Tornabene et al.

Summary: An innovative strategy based on the Equivalent Single Layer approach is proposed to analyze doubly-curved shells made of anisotropic materials, using the Hamiltonian Principle and GDQ method for numerical solution. Several examples were provided to validate the method, and a large parametric investigation was conducted to assess the sensitivity of vibration response in generally-curved shell structures.

COMPOSITE STRUCTURES (2021)

Add to Collection

Article Thermodynamics

Micromechanics-based elasto-plastic-damage energy formulation for strain gradient solids with granular microstructure

Luca Placidi et al.

Summary: This paper develops a continuum theory for materials with granular microstructure, accounting for dissipative phenomena like damage and plasticity. Objective kinematic descriptors are proposed to explain grain-grain relative displacements. Numerical experiments validate the model’s applicability and assess the competition between damage and plasticity.

CONTINUUM MECHANICS AND THERMODYNAMICS (2021)

Add to Collection

Article Mechanics

A rate-independent internal friction to describe the hysteretic behavior of pantographic structures under cyclic loads

A. Ciallella et al.

Summary: This paper investigates the cyclic behavior and dissipative properties of pantographic fabrics through analytical and experimental methods. A two-dimensional second-gradient continuum model is utilized to represent the elastic behavior of the system, and enriched with a suitable Dahl-like phenomenological dissipation law to account for dissipative phenomena. The numerical results are compared against experimental ones, demonstrating the effectiveness of the continuum model in reproducing the real behavior of pantographic fabrics.

MECHANICS RESEARCH COMMUNICATIONS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Inverted and Programmable Poynting Effects in Metamaterials

Aref Ghorbani et al.

Summary: The study designs a metamaterial that can be programmed to contract or extend under torsion and undergo nonlinear twist under compression, showing a novel inverted Poynting effect. By applying pre-compression, the Poynting modulus of the structure can be programmed from initial negative values to zero and positive values, providing new avenues for tuning the nonlinear elastic moduli and couplings of materials.

ADVANCED SCIENCE (2021)

Add to Collection

Article Materials Science, Multidisciplinary

The Dahl's Model for the Inelastic Bending Behavior of Textile Composite Preforms. Analysis of its Influence in Draping Simulation

Theo A. Ghafour et al.

Summary: The study aims to highlight the inelastic bending behavior of textile reinforcements during forming and find its origins, as well as to investigate the influence of bending inelasticity on forming simulation. Through three-point bending tests and the adaptation of the Dahl friction model, the inelastic bending behavior of textile reinforcements was characterized and simulated.

FRONTIERS IN MATERIALS (2021)

Add to Collection

Review Materials Science, Multidisciplinary

Lagrangian descriptions of dissipative systems: a review

Alberto Maria Bersani et al.

Summary: This paper reviews classical and recent results on the Lagrangian description of dissipative systems, focusing on the Helmholtz conditions for the existence of a Lagrangian function for a system of differential equations. The necessary and sufficient conditions are discussed in terms of multiplier factors, exploring the existence of equivalent Lagrangians for the same system. Examples are provided to illustrate the application of the techniques described in the theorems presented in the paper.

MATHEMATICS AND MECHANICS OF SOLIDS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Hemivariational continuum approach for granular solids with damage-induced anisotropy evolution

Dmitry Timofeev et al.

Summary: This study investigates the damage behavior of materials with granular microstructures using energy and variational approaches. By considering granular micromechanics through Piola's ansatz and objective kinematic descriptors, evolution equations and displacement evolution equations are derived, showing interesting damage-induced anisotropy evolution and formation of finite localization zones.

MATHEMATICS AND MECHANICS OF SOLIDS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

On the dependence of standard and gradient elastic material constants on a field of defects

Yury Solyaev et al.

MATHEMATICS AND MECHANICS OF SOLIDS (2020)

Add to Collection

Article Thermodynamics

An iso-parametric G1-conforming finite element for the nonlinear analysis of Kirchhoff rod. Part I: the 2D case

L. Greco

CONTINUUM MECHANICS AND THERMODYNAMICS (2020)

Add to Collection

Article Mechanics

Enriched buckling for beam-lattice metamaterials

Victor A. Eremeyev et al.

MECHANICS RESEARCH COMMUNICATIONS (2020)

Add to Collection

Article Mechanics

Non-standard Timoshenko beam model for chiral metamaterial: Identification of stiffness parameters

Michele De Angelo et al.

MECHANICS RESEARCH COMMUNICATIONS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Three-point bending test of pantographic blocks: numerical and experimental investigation

M. Erden Yildizdag et al.

MATHEMATICS AND MECHANICS OF SOLIDS (2020)

Add to Collection

Article Engineering, Mechanical

An inverse identification strategy for the mechanical parameters of a phenomenological hysteretic constitutive model

Salvatore Sessa et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2020)

Add to Collection

Article Multidisciplinary Sciences

A Cosserat Model of Elastic Solids Reinforced by a Family of Curved and Twisted Fibers

Milad Shirani et al.

SYMMETRY-BASEL (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Stiffness optimization in nonlinear pantographic structures

Boris Desmorat et al.

MATHEMATICS AND MECHANICS OF SOLIDS (2020)

Add to Collection

Article Mathematics, Applied

On the well posedness of static boundary value problem within the linear dilatational strain gradient elasticity

Victor A. Eremeyev et al.

ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND PHYSIK (2020)

Add to Collection

Article Mathematics

Weak Solutions within the Gradient-Incomplete Strain-Gradient Elasticity

V. A. Eremeyev et al.

LOBACHEVSKII JOURNAL OF MATHEMATICS (2020)

Add to Collection

Article Mechanics

AN APPRECIATION AND DISCUSSION OF PAUL GERMAIN'S THE METHOD OF VIRTUAL POWER IN THE MECHANICS OF CONTINUOUS MEDIA I: SECOND-GRADIENT THEORY

Marcelo Epstein et al.

MATHEMATICS AND MECHANICS OF COMPLEX SYSTEMS (2020)

Add to Collection

Article Mechanics

THE METHOD OF VIRTUAL POWER IN THE MECHANICS OF CONTINUOUS MEDIA I: SECOND-GRADIENT THEORY

Paul Germain

MATHEMATICS AND MECHANICS OF COMPLEX SYSTEMS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Mechanics of fiber composites with fibers resistant to extension and flexure

Mahdi Zeidi et al.

MATHEMATICS AND MECHANICS OF SOLIDS (2019)

Add to Collection

Article Thermodynamics

Out-of-plane buckling of pantographic fabrics in displacement-controlled shear tests: experimental results and model validation

Emilio Barchiesi et al.

CONTINUUM MECHANICS AND THERMODYNAMICS (2019)

Add to Collection

Article Thermodynamics

Isogeometric analysis for nonlinear planar pantographic lattice: discrete and continuum models

F. Maurin et al.

CONTINUUM MECHANICS AND THERMODYNAMICS (2019)

Add to Collection

Article Thermodynamics

The macroscopic behavior of pantographic sheets depends mainly on their microstructure: experimental evidence and qualitative analysis of damage in metallic specimens

Michele De Angelo et al.

CONTINUUM MECHANICS AND THERMODYNAMICS (2019)

Add to Collection

Article Mechanics

Force-displacement relationship in micro-metric pantographs: Experiments and numerical simulations

Francesco dell'Isola et al.

COMPTES RENDUS MECANIQUE (2019)

Add to Collection

Article Engineering, Mechanical

Nonlinear dynamic analysis of hysteretic mechanical systems by combining a novel rate-independent model and an explicit time integration method

Nicolo Vaiana et al.

NONLINEAR DYNAMICS (2019)

Add to Collection

Article Thermodynamics

On existence and uniqueness of weak solutions for linear pantographic beam lattices models

Victor A. Eremeyev et al.

CONTINUUM MECHANICS AND THERMODYNAMICS (2019)

Add to Collection

Article Mechanics

Phenomenological aspects of quasi-perfect pivots in metallic pantographic structures

Mario Spagnuolo et al.

MECHANICS RESEARCH COMMUNICATIONS (2019)

Add to Collection

Article Mechanics

Numerical identification of constitutive parameters in reduced-order bi-dimensional models for pantographic structures: application to out-of-plane buckling

Michele De Angelo et al.

ARCHIVE OF APPLIED MECHANICS (2019)

Add to Collection

Article Mechanics

CONTINUUM THEORY FOR MECHANICAL METAMATERIALS WITH A CUBIC LATTICE SUBSTRUCTURE

Simon R. Eugster et al.

MATHEMATICS AND MECHANICS OF COMPLEX SYSTEMS (2019)

Add to Collection

Article Mechanics

A TWO-DIMENSIONAL CONTINUUM MODEL OF PANTOGRAPHIC SHEETS MOVING IN A 3D SPACE AND ACCOUNTING FOR THE OFFSET AND RELATIVE ROTATIONS OF THE FIBERS

Ivan Giorgio et al.

MATHEMATICS AND MECHANICS OF COMPLEX SYSTEMS (2019)

Add to Collection

Article Engineering, Multidisciplinary

Linear Pantographic Sheets: Existence and Uniqueness of Weak Solutions

Victor A. Eremeyev et al.

JOURNAL OF ELASTICITY (2018)

Add to Collection

Article Mechanics

On the validity range of strain-gradient elasticity: A mixed static-dynamic identification procedure

Giuseppe Rosi et al.

EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2018)

Add to Collection

Article Mechanics

Enhanced Piola-Hencky discrete models for pantographic sheets with pivots without deformation energy: Numerics and experiments

Emilio Turco et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2018)

Add to Collection

Article Multidisciplinary Sciences

Energy approach to brittle fracture in strain-gradient modelling

Luca Placidi et al.

PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2018)

Add to Collection

Article Mathematics, Applied

Two-dimensional strain gradient damage modeling: a variational approach

Luca Placidi et al.

ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND PHYSIK (2018)

Add to Collection

Article Mechanics

First experimental observation of the dynamical behavior of a pantographic metamaterial

M. Laudato et al.

MECHANICS RESEARCH COMMUNICATIONS (2018)

Add to Collection

Article Mechanics

A STRAIN GRADIENT VARIATIONAL APPROACH TO DAMAGE: A COMPARISON WITH DAMAGE GRADIENT MODELS AND NUMERICAL RESULTS

Luca Placidi et al.

MATHEMATICS AND MECHANICS OF COMPLEX SYSTEMS (2018)

Add to Collection

Article Mechanics

STRAIN GRADIENT AND GENERALIZED CONTINUA OBTAINED BY HOMOGENIZING FRAME LATTICES

Houssam Abdoul-Anziz et al.

MATHEMATICS AND MECHANICS OF COMPLEX SYSTEMS (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Numerical investigation of a particle system compared with first and second gradient continua: Deformation and fracture phenomena*

Antonio Battista et al.

MATHEMATICS AND MECHANICS OF SOLIDS (2017)

Add to Collection

Article Mechanics

Qualitative pivot damage analysis in aluminum printed pantographic sheets: Numerics and experiments

M. Spagnuolo et al.

MECHANICS RESEARCH COMMUNICATIONS (2017)

Add to Collection

Article Engineering, Multidisciplinary

First versus second gradient energies for planar sheets with two families of inextensible fibres: Investigation on deformation boundary layers, discontinuities and geometrical instabilities

M. Cuomo et al.

COMPOSITES PART B-ENGINEERING (2017)

Add to Collection

Article Mechanics

Fiber rupture in sheared planar pantographic sheets: Numerical and experimental evidence

Emilio Turco et al.

MECHANICS RESEARCH COMMUNICATIONS (2016)

Add to Collection

Article Multidisciplinary Sciences

Large deformations of planar extensible beams and pantographic lattices: heuristic homogenization, experimental and numerical examples of equilibrium

F. dell'Isola et al.

PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2016)

Add to Collection

Article Mathematics, Applied

Hencky-type discrete model for pantographic structures: numerical comparison with second gradient continuum models

Emilio Turco et al.

ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND PHYSIK (2016)

Add to Collection

Article Mathematics, Applied

Designing a light fabric metamaterial being highly macroscopically tough under directional extension: first experimental evidence

Francesco dell'Isola et al.

ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND PHYSIK (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Analytical continuum mechanics a la Hamilton-Piola least action principle for second gradient continua and capillary fluids

N. Auffray et al.

MATHEMATICS AND MECHANICS OF SOLIDS (2015)

Add to Collection

Article Materials Science, Multidisciplinary

At the origins and in the vanguard of peridynamics, non-local and higher-gradient continuum mechanics: An underestimated and still topical contribution of Gabrio Piola

Francesco dell'Isola et al.

MATHEMATICS AND MECHANICS OF SOLIDS (2015)

Add to Collection

Article Engineering, Mechanical

Numerical investigation on mechanical properties of cellular lattice structures fabricated by fused deposition modeling

M. R. Karamooz Ravari et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2014)

Add to Collection

Article Mechanics

Finite deformations of fibre-reinforced elastic solids with fibre bending stiffness

A. J. M. Spencer et al.

INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS (2007)

Add to Collection

Article Materials Science, Multidisciplinary

Truss modular beams with deformation energy depending on higher displacement gradients

JJ Alibert et al.

MATHEMATICS AND MECHANICS OF SOLIDS (2003)

Add to Collection

© Peeref 2019-2024. All rights reserved.