Related references
Note: Only part of the references are listed.Effects of tool pin thread on temperature field and material mixing in friction stir welding of dissimilar Al/Mg alloys
Tao Jiang et al.
JOURNAL OF MANUFACTURING PROCESSES (2022)
Joint formation and mechanical properties of ultrasonic-assisted transient liquid bonding of dissimilar Al/Mg with a Zn interlayer in air
Xuesong Liu et al.
JOURNAL OF MANUFACTURING PROCESSES (2022)
Comparing the roles of Sb and Bi on microstructures and application properties of the Al-15% Si alloy
Cleiton Luiz Pereira et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
High strength-ductility and rapid degradation rate of as-cast Mg-Cu-Al alloys for application in fracturing balls
Wei Tan et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)
Investigation on mechanical, tribological and microstructural properties of Al-Mg-Si-T6/SiC/muscovite-hybrid metal-matrix composites for high strength applications
Shubham Sharma et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)
Dissimilar friction stir lap welding of AA7075 to AZ31B in the presence of Sn interlayer
Omid Karimi-Dermani et al.
JOURNAL OF MANUFACTURING PROCESSES (2021)
Grain refinement caused by intensified cavitation within narrow channel and its improvement to ultrasonically soldered Al joint property
Zhengwei Li et al.
ULTRASONICS SONOCHEMISTRY (2020)
Direct Ultrasonic Soldering of AlN Ceramics with Copper Substrate Using Zn-Al-Mg Solder
Roman Kolenak et al.
METALS (2020)
Microstructure evolution and mechanical properties of ultrasonically TLP bonded Mg joint
Zhiwu Xu et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
Diffusion bonding of aluminum-magnesium using cold rolled copper interlayer
Javad Varmazyar et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Enhancing the solid/liquid interfacial metallurgical reaction of Sn plus Cu composite solder by ultrasonic-assisted chip attachment
Hao Pan et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Cavitation at filler metal/substrate interface during ultrasonic-assisted soldering. Part II: Cavitation erosion effect
Zhengwei Li et al.
ULTRASONICS SONOCHEMISTRY (2019)
Ultra-rapid transient liquid phase bonding of Mg alloys within 1 s in air by ultrasonic assistance
Zhiwu Xu et al.
MATERIALS & DESIGN (2019)
Ultrasonic-assisted fluxless reactive bonding of Mg/Al dissimilar alloy using Zn-Al solder in air
Zhiwei Lai et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2018)
Control of Mg2Sn formation through ultrasonic-assisted transient liquid phase bonding of Mg to Al
Zhengwei Li et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
Homogeneous (Cu, Ni)6Sn5 intermetallic compound joints rapidly formed in asymmetrical Ni/Sn/Cu system using ultrasound-induced transient liquid phase soldering process
Z. L. Li et al.
ULTRASONICS SONOCHEMISTRY (2018)
Dissimilar welding of A7075-T651 and AZ31B alloys by gas metal arc plug welding method
M. R. Islam et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Microstructure and mechanical properties of dissimilar inertia friction welding of 7A04 aluminum alloy to AZ31 magnesium alloy
Wei Guo et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Effect of bonding time on the joint properties of transient liquid phase bonding between Ti-6Al-4V and AISI 304
Ehsan Norouzi et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Study on the microstructure and mechanical properties of Cu-Sn intermetallic joints rapidly formed by ultrasonic-assisted transient liquid phase soldering
J. H. Liu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Ultrasound-Assisted Transient Liquid Phase Bonding of Magnesium Alloy Using Brass Interlayer in Air
Zhiwei Lai et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2017)
Crystallographic orientations of intermetallic compounds of a multi-pass friction stir processed Al/Mg composite materials
Yadong Zhao et al.
MATERIALS CHARACTERIZATION (2017)
Non-interfacial growth of Cu3Sn in Cu/Sn/Cu joints during ultrasonic assisted transient liquid phase soldering process
H. Y. Zhao et al.
MATERIALS LETTERS (2017)
Rapid Ag/Sn/Ag transient liquid phase bonding for high-temperature power devices packaging by the assistance of ultrasound
Huakai Shao et al.
ULTRASONICS SONOCHEMISTRY (2017)
Joining Mg alloys with Zn interlayer by novel ultrasonic-assisted transient liquid phase bonding method in air
Zhiwei Lai et al.
MATERIALS LETTERS (2016)
Joining of magnesium and aluminum via arc-assisted ultrasonic seam welding with Sn/Zn composite interlayer
Xiangyu Dai et al.
MATERIALS LETTERS (2016)
Effect of thermal tempering on microstructure and mechanical properties of Mg-AZ31/Al-6061 diffusion bonding
Mojtaba Jafarian et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Rapid formation of intermetallic joints through ultrasonic-assisted die bonding with Sn-0.7Cu solder for high temperature packaging application
Hongjun Ji et al.
SCRIPTA MATERIALIA (2016)
Theoretical model of ice nucleation induced by acoustic cavitation. Part 1: Pressure and temperature profiles around a single bubble
C. Cogne et al.
ULTRASONICS SONOCHEMISTRY (2016)
Effect of lap configuration on magnesium to aluminum friction stir lap welding assisted by external stationary shoulder
Shude Ji et al.
MATERIALS & DESIGN (2016)
Microstructure, mechanical properties and mechanism of ultrasound-assisted rapid transient liquid phase bonding of magnesium alloy in air
Ruishan Xie et al.
MATERIALS & DESIGN (2016)
Evaluation of diffusion welding of 6061 aluminum and AZ31 magnesium alloys without using an interlayer
Mojtaba Jafarian et al.
MATERIALS & DESIGN (2015)
CFD simulation of acoustic cavitation in a crude oil upgrading sonoreactor and prediction of collapse temperature and pressure of a cavitation bubble
Shahram Niazi et al.
CHEMICAL ENGINEERING RESEARCH & DESIGN (2014)
Joining of aluminum and magnesium via pre-roll-assisted A-TIG welding with Zn interlayer
H. T. Zhang et al.
MATERIALS LETTERS (2014)
Effect of Al foils interlayer on microstructures and mechanical properties of Mg-Al butt joints welded by gas tungsten arc welding filling with Zn filler metal
Fei Liu et al.
MATERIALS & DESIGN (2013)
The thermal cycle during the dissimilar friction spot welding of aluminum and magnesium alloy
U. F. H. Suhuddin et al.
SCRIPTA MATERIALIA (2013)
Microstructure design and dissolution behavior between 2024 Al/Sn with the ultrasonic-associated soldering
Yuanxing Li et al.
MATERIALS & DESIGN (2012)
Influence of holding time on microstructure and shear strength of Mg-Al alloys joint diffusion bonded with Zn-5Al interlayer
L. M. Liu et al.
MATERIALS SCIENCE AND TECHNOLOGY (2011)
Effect of Zn alloy interlayer on interface microstructure and strength of diffusion-bonded Mg-Al joints
L. M. Zhao et al.
SCRIPTA MATERIALIA (2008)
Temperature and pressure fields due to collapsing bubble under ultrasound
Ki Young Kim et al.
CHEMICAL ENGINEERING JOURNAL (2007)
Reactive brazing of Al alloy to Mg alloy using zinc-based brazing alloy
Liming Liu et al.
MATERIALS LETTERS (2007)