Related references
Note: Only part of the references are listed.Optimal surrogate building using SVR for an industrial grinding process
Ravi Kiran Inapakurthi et al.
MATERIALS AND MANUFACTURING PROCESSES (2022)
A modified Kohonen map algorithm for clustering time series data
Kalpathy Jayanth Krishnan et al.
EXPERT SYSTEMS WITH APPLICATIONS (2022)
Optimizing grinding operation with correlated uncertain parameters
Nagajyothi Virivinti et al.
MATERIALS AND MANUFACTURING PROCESSES (2021)
A novel data-driven sampling strategy for optimizing industrial grinding operation under uncertainty using chance constrained programming
Surbhi Sharma et al.
POWDER TECHNOLOGY (2021)
Investigations on laser actuation and life cycle characteristics of NiTi shape memory alloy bimorph for non-contact functional applications
Pravin Karna et al.
SENSORS AND ACTUATORS A-PHYSICAL (2021)
Design and Development of NiTi Shape Memory Alloy Belt for Waste Heat Energy Recovery System
Jayachandran Subbian et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2021)
Analysis of actuation characteristics of CuAlNiMn/Polyimide thin film shape memory alloy
M. Geetha et al.
MATERIALS TODAY-PROCEEDINGS (2021)
Experimental and theoretical studies of a thermal switch based on shape-memory alloy cladded with graphene paper
Jiuming Ma et al.
ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS (2020)
Multi-objective optimization of iron ore induration process using optimal neural networks
Srinivas Soumitri Miriyala et al.
MATERIALS AND MANUFACTURING PROCESSES (2020)
Many-objective optimization of hot-rolling process of steel: A hybrid approach
Prateek Mittal et al.
MATERIALS AND MANUFACTURING PROCESSES (2020)
An Evolutionary Neuro-Fuzzy C-means Clustering Technique
Priyanka D. Pantula et al.
ENGINEERING APPLICATIONS OF ARTIFICIAL INTELLIGENCE (2020)
Deep learning based system identification of industrial integrated grinding circuits
Srinivas Soumitri Miriyala et al.
POWDER TECHNOLOGY (2020)
Towards Efficient Robust Optimization using Data based Optimal Segmentation of Uncertain Space
Priyanka D. Pantula et al.
RELIABILITY ENGINEERING & SYSTEM SAFETY (2020)
Recurrent neural networks based modelling of industrial grinding operation
Ravi Kiran Inapakurthi et al.
CHEMICAL ENGINEERING SCIENCE (2020)
Challenges for practical applications of shape memory alloy actuators
Dileep Kumar Soother et al.
MATERIALS RESEARCH EXPRESS (2020)
Optimization of laser parameters for improved corrosion resistance of nitinol
K. E. Ch Vidyasagar et al.
MATERIALS AND MANUFACTURING PROCESSES (2020)
Data driven robust optimization of grinding process under uncertainty
Ravi Kiran Inapakurthi et al.
MATERIALS AND MANUFACTURING PROCESSES (2020)
Optimization of spark plasma sintering parameters for NiTiCu shape memory alloys
C. Velmurugan et al.
MATERIALS AND MANUFACTURING PROCESSES (2019)
Rapid and low power laser actuation of sputter-deposited NiTi shape memory alloy (SMA) MEMS thermal bimorph actuators
Cory R. Knick et al.
SENSORS AND ACTUATORS A-PHYSICAL (2019)
High frequency, low power, electrically actuated shape memory alloy MEMS bimorph thermal actuators
Cory R. Knick et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2019)
Surface integrity analysis of Nitinol-60 shape memory alloy in WEDM
Biplab Kumar Roy et al.
MATERIALS AND MANUFACTURING PROCESSES (2019)
Shape memory alloy engine for high efficiency low-temperature gradient thermal to electrical conversion
Prashant Kumar et al.
APPLIED ENERGY (2019)
Investigations on performance viability of NiTi, NiTiCu, CuAlNi and CuAlNiMn shape memory alloy/Kapton composite thin film for actuator application
S. Jayachandran et al.
COMPOSITES PART B-ENGINEERING (2019)
Exploring the functional capabilities of NiTi shape memory alloy thin films deposited using electron beam evaporation technique
S. Jayachandran et al.
VACUUM (2019)
A data-driven approach towards finding closer estimates of optimal solutions under uncertainty for an energy efficient steel casting process
Priyanka D. Pantula et al.
ENERGY (2019)
Fabrication and Characterization of Freestanding NiTi Based Thin Film Materials for Shape Memory Micro-actuator Applications
Christoph Bechtold et al.
SHAPE MEMORY AND SUPERELASTICITY (2019)
Enhancing the life cycle behaviour of Cu-Al-Ni shape memory alloy bimorph by Mn addition
K. Akash et al.
MATERIALS LETTERS (2018)
Investigations on actuation characteristics and life cycle behaviour of CuAlNiMn shape memory alloy bimorph towards flappers for aerial robots
K. Akash et al.
MATERIALS & DESIGN (2018)
Investigation on Hot Fluid Based Actuation of SMA Spring and Their Application for the Development of Heat Engine
A. Verma et al.
PROCEEDINGS OF THE 1ST INTERNATIONAL CONFERENCE ON MECHANICAL AND MATERIALS SCIENCE ENGINEERING: INNOVATION AND RESEARCH-2018 (ICMMSE:IR 2018) (2018)
Comparative Study of Electrically and Hot Water Actuated Shape Memory Alloy using Developed Thermo-mechanical Cycletest Bench
Tameshwar Nath et al.
DEFENCE SCIENCE JOURNAL (2017)
KERNEL: Enabler to build smart surrogates for online optimization and knowledge discovery
Priyanka Devi Pantula et al.
MATERIALS AND MANUFACTURING PROCESSES (2017)
Parametric investigations to enhance the thermomechanical properties of CuAlNi shape memory alloy Bi-morph
K. Akash et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Ag implantation-induced modification of Ni-Ti shape memory alloy thin films
V. Kumar et al.
RADIATION EFFECTS AND DEFECTS IN SOLIDS (2017)
Investigations on the life cycle behavior of Cu-Al-Ni/polyimide shape memory alloy bi-morph at varying substrate thickness and actuation conditions
K. Akash et al.
SENSORS AND ACTUATORS A-PHYSICAL (2017)
Investigations on Transformer Oil Temperature Sensing using CuAlNi/Polyimide Shape Memory Alloy composite film
K. Akash et al.
BEHAVIOR AND MECHANICS OF MULTIFUNCTIONAL MATERIALS AND COMPOSITES 2017 (2017)
Comparative study of surrogate approaches while optimizing computationally expensive reaction networks
Srinivas Soumitri Miriyala et al.
CHEMICAL ENGINEERING SCIENCE (2016)
Forced Air Cooling of Shape-Memory Alloy Actuators for a Prosthetic Hand
Fergus Taylor et al.
JOURNAL OF COMPUTING AND INFORMATION SCIENCE IN ENGINEERING (2016)
Shape memory alloy thin films and heterostructures for MEMS applications: A review
Nitin Choudhary et al.
SENSORS AND ACTUATORS A-PHYSICAL (2016)
35 Hz shape memory alloy actuator with bending-twisting mode
Sung-Hyuk Song et al.
SCIENTIFIC REPORTS (2016)
Investigation on actuation and thermo-mechanical behaviour of Shape Memory Alloy spring using hot water
Priya Chouhan et al.
INTERNATIONAL CONFERENCE ON ADVANCES IN MATERIALS AND MANUFACTURING APPLICATIONS (ICONAMMA-2016) (2016)
Effects of Annealing and Training on NiTi Alloy Ring for Clamping Device
W. Li et al.
MATERIALS AND MANUFACTURING PROCESSES (2016)
New Au-Cu-Al thin fihn shape memory alloys with tunable functional properties and high thermal stability
Pio John S. Buenconsejo et al.
ACTA MATERIALIA (2015)
Intuitionistic Fuzzy Chance Constrained Programming for Handling Parametric Uncertainty: An Industrial Grinding Case Study
Nagajyothi Virivinti et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2015)
Microstructure and shape memory behavior of annealed Ti44.5Ni55.5-XCuX (X=15.3-32.8) thin films with low Ti content
Z. Y. Gao et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Crystallization study of amorphous sputtered NiTi bi-layer thin film
Maryam Mohri et al.
MATERIALS CHARACTERIZATION (2015)
Surface characteristics and electrochemical behaviour of sputter-deposited NiTi thin film
E. Saebnoori et al.
PHILOSOPHICAL MAGAZINE (2015)
Ti-Ni-Cu/polyimide composite-film actuator and simulation tool
Akira Ishida
SENSORS AND ACTUATORS A-PHYSICAL (2015)
Kriging Surrogate Based Multi-objective Optimization of Bulk Vinyl Acetate Polymerization with Branching
Anitha Mogilicharla et al.
MATERIALS AND MANUFACTURING PROCESSES (2015)
NiTiCu/AlN/NiTiCu shape memory thin film heterostructures for vibration damping in MEMS
Navjot Kaur et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
Effects of Mn Additions on the Structure, Mechanical Properties, and Corrosion Behavior of Cu-Al-Ni Shape Memory Alloys
Safaa N. Saud et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2014)
A review of shape memory alloy research, applications and opportunities
Jaronie Mohd Jani et al.
MATERIALS & DESIGN (2014)
Mechanical properties identification and design optimization of nitinol shape memory alloy microactuators
M. Salehi et al.
SMART MATERIALS AND STRUCTURES (2014)
Shape memory NiTi thin films deposited on polyimide at low temperature
V. G. Kotnur et al.
SURFACE & COATINGS TECHNOLOGY (2014)
Deposition of superelastic composite NiTi based films
Wolfgang Tillmann et al.
VACUUM (2014)
Shape memory behavior of TiNi alloy films sputter-deposited on polyimide substrate
Yoichi Kishi et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2013)
Properties and applications of Ti-Ni-Cu shape-memory-alloy thin films
A. Ishida et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2013)
The effect of training on two-way shape memory effect of binary NiTi and NiTi based ternary high temperature shape memory alloys
K. C. Atli et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Sputter deposited Ni-Ti thin films on polyimide substrate
V. G. Kotnur et al.
SURFACE & COATINGS TECHNOLOGY (2013)
Structural Effects of Training Cycles in Shape Memory Actuators for Temperature Control
G. Vitel et al.
MATERIALS AND MANUFACTURING PROCESSES (2012)
Finite Element analysis of a shape memory alloy actuator for a micropump
Tarek Merzouki et al.
SIMULATION MODELLING PRACTICE AND THEORY (2012)
Nano-Impact (Fatigue) Characterization of As-Deposited Amorphous Nitinol Thin Film
Nadimul H. Faisal et al.
COATINGS (2012)
Structure of martensite in deformed Ti-Ni-Cu thin films
X. L. Meng et al.
ACTA MATERIALIA (2011)
A novel lattice correspondence of B19 -> B19 ' transformation in Ti-Ni-Cu shape memory alloy thin film
Xianglong Meng et al.
PHILOSOPHICAL MAGAZINE LETTERS (2011)
Laser annealing of functionally graded NiTi thin plate
Qinglin Meng et al.
SCRIPTA MATERIALIA (2011)
Review on the temperature memory effect in shape memory alloys
Zhiguo Wanga et al.
INTERNATIONAL JOURNAL OF SMART AND NANO MATERIALS (2011)
Effect of Pd content on crystallization and shape memory properties of Ti-Ni-Pd thin films
Hee Young Kim et al.
INTERNATIONAL JOURNAL OF SMART AND NANO MATERIALS (2011)
Tailoring the Response Time of Shape Memory Alloy Wires through Active Cooling and Pre-stress
Yonas Tadesse et al.
JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2010)
Predictive position and force control for shape memory alloy cylinders
Nguyen Trong Tai et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2010)
A Shape Memory Alloy Energy Absorber for Backpack Design
Sindy Mei-ling Lau et al.
MATERIALS AND MANUFACTURING PROCESSES (2010)
The evolution of Ti2Ni precipitates in annealed Ti51Ni49 shape memory melt-spun ribbons
Ling-Mei Wu et al.
PHILOSOPHICAL MAGAZINE LETTERS (2010)
Identification of optimized Ti-Ni-Cu shape memory alloy compositions for high-frequency thin film microactuator applications
R. Zarnetta et al.
SMART MATERIALS AND STRUCTURES (2010)
Micromilling of NiTi Shape-Memory Alloys with Ball Nose Cutters
Dirk Biermann et al.
MATERIALS AND MANUFACTURING PROCESSES (2009)
Study on liquid-jet cooling and heating of the moving SMA actuator
Li-xiang Zhang et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2008)
Recent advances in microscale pumping technologies: a review and evaluation
Brian D. Iverson et al.
MICROFLUIDICS AND NANOFLUIDICS (2008)
Shape memory behaviour of annealed Ti(48.5)Ni((51.5-x))Cu(x) (x=6.2-33.5) thin films
A. Ishida et al.
PHILOSOPHICAL MAGAZINE (2008)
Influence of Ti(2)Cu precipitates on B19 martensite structure in a Ti-rich Ti-Ni-Cu thin film
X. L. Meng et al.
PHILOSOPHICAL MAGAZINE LETTERS (2008)
Ti-M-Cu shape-memory alloy thin fihn formed on polyimide substrate
A. Ishida et al.
THIN SOLID FILMS (2008)
Nanoindentation of Ni-Ti thin films
P. D. Tall et al.
MATERIALS AND MANUFACTURING PROCESSES (2007)
Effect of thermal processing on microstructure and shape-memory characteristics of a copper-zinc-aluminum shape-memory alloy
V. Sampath
MATERIALS AND MANUFACTURING PROCESSES (2007)
Shape memory behavior of Ti-Ni-Cu thin films
A. Ishida et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
Improvement of shape-memory characteristics and mechanical properties of copper-zinc-aluminum shape-memory alloy with low aluminum content by grain refinement
V. Sampath
MATERIALS AND MANUFACTURING PROCESSES (2006)
Microstructure and shape-memory behavior of annealed Ti51.5Ni33.1Cu15.4 thin films
A Ishida et al.
PHILOSOPHICAL MAGAZINE LETTERS (2006)
Laser annealing of amorphous NiTi shape memory alloy thin films to locally induce shape memory properties
X Wang et al.
ACTA MATERIALIA (2005)
Studies on the effect of grain refinement and thermal processing on shape memory characteristics of Cu-Al-Ni alloys
V Sampath
SMART MATERIALS AND STRUCTURES (2005)
Micromirror structure actuated by TiNi shape memory thin films
Y Fu et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2005)
Development of hydraulic linear actuator using thin film SMA
DD Shin et al.
SENSORS AND ACTUATORS A-PHYSICAL (2005)
Investigations on temperature induced martensitic transformations in sputtered TiNi thin films
AKN Kumar et al.
FERROELECTRICS (2005)
TiNi-based thin films in MEMS applications: a review
YQ Fu et al.
SENSORS AND ACTUATORS A-PHYSICAL (2004)
Structural and functional fatigue of NiTi shape memory alloys
G Eggeler et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Recent developments in shape memory thin film technology
B Winzek et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Substrate-induced stress and transformation characteristics of a deposited Ti-Ni-Cu thin film
Y Liu et al.
PHILOSOPHICAL MAGAZINE (2004)
Grain-size effect on shape-memory behavior of Ti35.0Ni49.7Zr15.4 thin films
T Sawaguchi et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2004)
A comparison of PZT-based and TiNi shape memory alloy-based MEMS microactuators
BK Lai et al.
FERROELECTRICS (2004)
Thickness effect on shape memory behavior of Ti-50.0at.%Ni thin film
A Ishida et al.
ACTA MATERIALIA (2003)
Magnetron sputtered Ti50Ni40Pt10 shape memory alloy thin films
YQ Fu et al.
JOURNAL OF MATERIALS SCIENCE LETTERS (2003)
Effects of film composition and annealing on residual stress evolution for shape memory TiNi film
YQ Fu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)
Is weaning failure caused by low-frequency fatigue of the diaphragm?
F Laghi et al.
AMERICAN JOURNAL OF RESPIRATORY AND CRITICAL CARE MEDICINE (2003)
Thermoelastic stress-induced thin film martensites
C Craciunescu et al.
SCRIPTA MATERIALIA (2003)
RF magnetron sputtered TiNiCu shape memory alloy thin film
YQ Fu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)
Adhesion and interfacial structure of magnetron sputtered TiNi films on Si/SiO2 substrate
YQ Fu et al.
THIN SOLID FILMS (2003)
Microactuators based on conducting polymers
M Roemer et al.
ANALYTICAL AND BIOANALYTICAL CHEMISTRY (2002)
Microstructure and shape memory behavior of Ti51.2(Pd27.0Ni21.8) and Ti49.5(Pd28.5Ni22.0) thin films
T Sawaguchi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2002)
Examination of the sputtering profile of NiTi under target heating conditions
KK Ho et al.
THIN SOLID FILMS (2002)
Transformation properties and microstructure of sputter-deposited Ni-Ti shape memory alloy thin films
T Lehnert et al.
JOURNAL OF MATERIALS SCIENCE (2002)
Relaxation and recovery of stress during martensite transformation for sputtered shape memory TiNi film
YQ Fu et al.
SURFACE & COATINGS TECHNOLOGY (2002)
The effects of process-induced stress on the microstructures and the phase transformation characteristics of sputtered titanium-nickel thin-film shape-memory alloys
RX Wang et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2001)
Manufacturing issues of thin film NiTi microwrapper
JJ Gill et al.
SENSORS AND ACTUATORS A-PHYSICAL (2001)
Interfacial microstructures of rf-sputtered TiNi shape memory alloy thin films on (100) silicon
SK Wu et al.
PHILOSOPHICAL MAGAZINE A-PHYSICS OF CONDENSED MATTER STRUCTURE DEFECTS AND MECHANICAL PROPERTIES (2001)
Characterization of TiNi shape-memory alloy thin films for MEMS applications
YQ Fu et al.
SURFACE & COATINGS TECHNOLOGY (2001)
Effects of composition and annealing on shape memory behavior of Ti-rich Ti-Ni thin films formed by sputtering
A Ishida et al.
MATERIALS TRANSACTIONS (2001)
Novel fabrication technique of TiNi shape memory alloy film using separate Ti and Ni targets
A Ohta et al.
SENSORS AND ACTUATORS A-PHYSICAL (2000)
Experimental determination of thermal and electrical properties of Ni-Ti shape memory wires
MG Faulkner et al.
SMART MATERIALS & STRUCTURES (2000)
Thermodynamic modeling of the recovery strains of sputter-deposited shape memory alloys Ti-Ni and Ti-Ni-Cu thin films
B Gabry et al.
THIN SOLID FILMS (2000)
Sputter deposition of NiTi thin film shape memory alloy using a heated target
KK Ho et al.
THIN SOLID FILMS (2000)
Texture of Ti-Ni rolled thin plates and sputter-deposited thin films
S Miyazaki et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2000)