☆ 4.4 Article

Role of copper alumina nanoparticles on the performance of polyvinylchloride nanocomposites

JOURNAL OF VINYL & ADDITIVE TECHNOLOGY (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Composites

Insights into structural, thermal, electrical and mechanical properties of copper alumina reinforced chlorinated natural rubber nanocomposites

K. Parvathi et al.

Summary: This research aimed to fabricate low-cost and highly durable conducting rubber products by incorporating copper alumina nanocomposites into chlorinated natural rubber. The results showed that the addition of nanoparticles significantly improved the electrical conductivity and hardness, while reducing the elongation at break and resilience. These improvements are important for the design of flexible flame retardant electronic devices, electromagnetic induction shielding, and conducting adhesive materials.

JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2023)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Synthesis, characterization, dielectric properties and gas sensing application of polythiophene/chitosan nanocomposites

K. Amruth et al.

Summary: This paper investigates the polymerization of thiophene monomer in the presence of chitosan nano-powders and analyzes the formation and properties of polythiophene/chitosan nanocomposites. The study confirms the chemical interaction between polythiophene and chitosan nano-powders, as well as the uniform positioning of chitosan in polythiophene. The nanocomposites exhibit improved electrical conductivity and gas sensing performance.

INORGANIC CHEMISTRY COMMUNICATIONS (2022)

Add to Collection

Article Chemistry, Applied

Enhanced dielectric performance of polydimethylsiloxane-based ternary composites films via tailored hydrogen bonds between carbon nanotube and barium titanate as modified fillers

Yaokai Tang et al.

Summary: The development of BT-cCNT/PDMS and BT-aCNT/PDMS composites allows for the bridging of BTs and CNTs at the interface through hydrogen bonds, affecting the dielectric properties of the composites. By regulating the hydrogen bonds, tailored performance of the polymer-based dielectric composites can be achieved.

JOURNAL OF VINYL & ADDITIVE TECHNOLOGY (2022)

Add to Collection

Article Chemistry, Applied

Influences of plasticizer molecular structure and content on flexural fatigue of soft poly(vinyl chloride)

Haiyang Liu et al.

Summary: The study found that different plasticizers have significant effects on the glass transition temperature, viscosity, and melt strength of PVC. When the ratio of PVC and plasticizer was 1:1, the sample exhibited the best plasticizing effect and low-temperature toughness.

JOURNAL OF VINYL & ADDITIVE TECHNOLOGY (2022)

Add to Collection

Article Polymer Science

Study of dielectric relaxation and charge transport of titanium dioxide-polyvinyl chloride nanocomposites

T. A. Abdel-Baset et al.

Summary: TiO2 nanoparticles were prepared using the sol-gel method and mixed with polyvinyl chloride (PVC) to create nanocomposite films. The dielectric properties of TiO2/PVC nanocomposite films were thoroughly investigated, showing that the addition of TiO2 nanoparticles can enhance dielectric constant and dielectric modulus.

POLYMER BULLETIN (2022)

Add to Collection

Article Polymer Science

A study on the physical, mechanical, thermal properties and soil biodegradation of HDPE blended with PBS/HDPE-g-MA

E. El-Rafey et al.

Summary: Blends of HDPE/PBS/HDPE-g-MA were prepared using injection molding technique and their properties were studied. Mechanical properties of the blends improved with increasing PBS and HDPE-g-MA content, while thermal analysis indicated a decrease in crystallinity and MFI with PBS addition. The water absorption of the blends was slightly increased compared to neat HDPE.

POLYMER BULLETIN (2022)

Add to Collection

Article Materials Science, Composites

Compliant materials based on nickel oxide/chlorinated natural rubber nanocomposites

K. Parvathi et al.

Summary: This research article focuses on the preparation of chlorinated natural rubber (Cl-NR)/nickel oxide (NiO) nanocomposites using a simple and environmentally friendly two-roll mill mixing technique. The study demonstrates that increasing the nanofiller content improves the crystallinity, dispersion, glass transition temperature, and mechanical properties of the nanocomposites. In addition, the nanocomposites show higher AC conductivity, dielectric loss, and dielectric constant compared to pure Cl-NR. The incorporation of the nanofiller also reduces the cure time, making the fabrication of rubber products more cost-effective. The study suggests that the nanocomposites with 5 phr NiO loading exhibit the best mechanical and electrical properties and can be used for the fabrication of electromagnetic induction shielding materials, conducting adhesives, and flame-resistant flexible electronic devices.

POLYMER COMPOSITES (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Copper alumina @ poly (aniline-co-indole) nanocomposites: synthesis, characterization, electrical properties and gas sensing applications

S. Sankar et al.

Summary: Poly(aniline-co-indole)/copper alumina (PANI-co-PIN/Cu-Al2O3) nanocomposites with excellent AC conductivity, dielectric properties, and gas sensing capabilities were synthesized via in situ chemical oxidative polymerization. The successful encapsulation of Cu-Al2O3 nanoparticles in the copolymer was confirmed, and the nanocomposites showed improved electrical and gas sensing properties.

RSC ADVANCES (2022)

Add to Collection

Article Polymer Science

Synthesis, Characterization, Thermal Properties and Temperature-Dependent AC Conductivity Studies of Poly (Butyl Methacrylate)/Neodymium Oxide Nanocomposites

K. Suhailath et al.

Summary: The addition of neodymium oxide nanoparticles enhanced the glass transition temperature and thermal degradation temperature of PBMA, while increasing the electrical conductivity of the nanocomposite. The experimental results demonstrated better compatibility between the components, and the activation energy and exponential values indicated that the system follows small polaron hopping mechanism.

JOURNAL OF INORGANIC AND ORGANOMETALLIC POLYMERS AND MATERIALS (2021)

Add to Collection

Article Engineering, Multidisciplinary

Prediction of mechanical properties of graphite nanoflake/ polydimethylsiloxane nanocomposites as affected by processing method

Seulki Ha et al.

Summary: This study investigates the impact of manufacturing processes on porosity and mechanical properties of nanocomposites. It is found that the evolution of porosity is best modeled with the logistic function, and prediction models for mechanical properties are established based on this. The proposed models are in good agreement with experimental data.

COMPOSITES PART B-ENGINEERING (2021)

Add to Collection

Article Chemistry, Applied

Adenine functionalized antibacterial PVC with both photo and thermal stability

Reham A. Abdel-Monem et al.

Summary: Adenine was used as a precursor to synthesize antibacterial poly(vinyl chloride) (PVC). Adenine-functionalized PVC was successfully prepared and evaluated for antibacterial activity. The study also investigated the photostability, thermal stability, and morphology of the modified PVC, showing promising results.

JOURNAL OF VINYL & ADDITIVE TECHNOLOGY (2021)

Add to Collection

Article Chemistry, Applied

Influences of porous reduction graphene oxide/molybdenum disulfide as filler on dielectric properties, thermal stability, and mechanical properties of natural rubber

Hongwei Pan et al.

Summary: A novel ternary composite system was introduced, with rPGM conductive filler prepared by microwave reduction, resulting in NR composites with high elasticity and thermal resistance. The addition of rPGM significantly improved the electrical, mechanical, and thermal stability of the NR composites.

JOURNAL OF VINYL & ADDITIVE TECHNOLOGY (2021)

Add to Collection

Article Chemistry, Applied

Synergistic effect of talc/calcined kaolin binary fillers on rigid PVC: Improved properties of PVC composites

Oum Keltoum Mallem et al.

Summary: This study developed PVC composites using a combination of talc and calcined kaolin fillers, improving the mechanical properties and thermal stability of rigid PVC widely used in industry. Both chemical and mechanical treatments enhanced filler dispersion and compatibility with PVC, resulting in improved mechanical properties and thermal stability of the composites. The results demonstrated the synergistic effect of using stearic acid and urea treatments for the fillers in enhancing the properties of PVC composites.

JOURNAL OF VINYL & ADDITIVE TECHNOLOGY (2021)

Add to Collection

Article Materials Science, Composites

Synthesis, electrical, and dielectric properties of novel polyaniline/strontium di-nitrate composites

Indavara S. Ashwini et al.

Summary: Polyaniline (PANI) and polyaniline/strontium di-nitrate [Sr(NO3)(2)] composites were synthesized and studied for their charge transport mechanism. The interaction between Sr(NO3)(2) and PANI was confirmed, showing a decrease in DC conductivity with increasing Sr(NO3)(2) concentrations. The composites exhibited a hopping conduction mechanism, as indicated by the calculated exponent values.

POLYMER COMPOSITES (2021)

Add to Collection

Article Materials Science, Composites

Mathematical analysis to predict tensile strength of banana/glass hybrid polymer composite

Hitesh Jariwala et al.

Summary: This article presents a mathematical model to predict the tensile strength of banana/glass hybrid polymer composites, taking into account the effects of equivalent fiber surface efficiency factor and fiber waviness factor. The model is tested against experimental and literature results, showing a good approximation of tensile strength for hybrid composites with varying fiber loading.

POLYMER COMPOSITES (2021)

Add to Collection

Article Polymer Science

Development of hydroxyapatite nanoparticles reinforced chlorinated acrylonitrile butadiene rubber/chlorinated ethylene propylene diene monomer rubber blends

Alasseri Nihmath et al.

Summary: The polymer blend composites reinforced with hydroxyapatite nanoparticles showed enhanced mechanical properties, oil resistance, hardness, and AC conductivity. The addition of nanoparticles also decreased the diffusion rate of the blend composites with an anomalous trend in the diffusion mechanism. Among the blend composites, the sample with 7 phr of HA exhibited good oil and solvent resistance, increased AC conductivity, and improved mechanical properties.

JOURNAL OF APPLIED POLYMER SCIENCE (2021)

Add to Collection

Article Engineering, Environmental

ZnO-PVA Polymer Matrix with Transition Metals Oxide Nano-fillers for High Dielectric Mediums

Tahir Iqbal et al.

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2020)

Add to Collection

Article Thermodynamics

Investigations on the structural, mechanical, thermal, and electrical properties of Ce-doped TiO2/poly(n-butyl methacrylate) nanocomposites

K. Suhailath et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2019)

Add to Collection

Article Chemistry, Applied

The Surface Modification of Diatomite, Thermal, and Mechanical Properties of Poly(vinyl chloride)/Diatomite Composites

Guangfeng Wu et al.

JOURNAL OF VINYL & ADDITIVE TECHNOLOGY (2019)

Add to Collection

Article Chemistry, Applied

Effect of neodymium-doped titanium dioxide nanoparticles on the structural, mechanical, and electrical properties of poly(butyl methacrylate) nanocomposites

Kallan Suhailath et al.

JOURNAL OF VINYL & ADDITIVE TECHNOLOGY (2019)

Add to Collection

Article Chemistry, Applied

Thermal, Thermomechanical, and Morphological Characterization of Poly(vinyl chloride) (PVC)/ZnO Nanocomposites: PVC Molecular Weight Effect

Marziyeh Dastpaki et al.

JOURNAL OF VINYL & ADDITIVE TECHNOLOGY (2019)

Add to Collection

Article Chemistry, Applied

Properties of nanofillers/crosslinked polyethylene composites for cable insulation

Kai Sheng Lim et al.

JOURNAL OF VINYL & ADDITIVE TECHNOLOGY (2019)

Add to Collection

Article Polymer Science

Design and fabrication of flexible poly(vinyl chloride) dielectric composite reinforced with ZnO microvaristors

Jeen Maria Mathews et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2018)

Add to Collection

Article Polymer Science

Nanocomposite materials based on zinc sulfide nanoparticles reinforced chlorinated styrene butadiene rubber

V. C. Jasna et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2018)

Add to Collection

Article Chemistry, Applied

Investigation of the effects of nonisothermal suspension polymerization of vinyl chloride on resin properties

R. Darvishi et al.

JOURNAL OF VINYL & ADDITIVE TECHNOLOGY (2017)

Add to Collection

Article Materials Science, Composites

Enhanced Toughness of Multilayer Graphene-Filled Poly(vinyl chloride) Composites Prepared Using Melt-Mixing Method

Han Wang et al.

POLYMER COMPOSITES (2017)

Add to Collection

Article Materials Science, Composites

Surface and spectroscopic properties of CdSe/ZnS/PVC nanocomposites

R. M. Ahmed

POLYMER COMPOSITES (2017)

Add to Collection

Article Engineering, Multidisciplinary

Influences of nanoparticles aggregation/agglomeration on the interfacial/interphase and tensile properties of nanocomposites

Yasser Zare et al.

COMPOSITES PART B-ENGINEERING (2017)

Add to Collection

Article Chemistry, Applied

Palm oil-based compound as environmentally friendly plasticizer for poly(vinyl chloride)

Desmond Teck-Chye Ang et al.

JOURNAL OF VINYL & ADDITIVE TECHNOLOGY (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of Zn(NO3)2 filler on the dielectric permittivity and electrical modulus of PMMA

P. Maji et al.

BULLETIN OF MATERIALS SCIENCE (2015)

Add to Collection

Article Chemistry, Applied

Application of Response Surface Methodology in Describing Fusion Characteristics of Rigid Poly(vinyl chloride)/Nanoclay/Wood Flour/Calcium Carbonate Hybrid Nanocomposites

M. R. Saeb et al.

JOURNAL OF VINYL & ADDITIVE TECHNOLOGY (2015)

Add to Collection

Article Materials Science, Composites

Influence of the Compatibilizing Agent on Permeability and Contact Angle of Composites Based on Polylactide

Ewa Olewnik et al.

POLYMER COMPOSITES (2015)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Synthesis and characterization of copper nanoparticles/polyvinyl chloride (Cu NPs/PVC) nanocomposites

A. Guzman et al.

INTERNATIONAL CONGRESS OF SCIENCE AND TECHNOLOGY OF METALLURGY AND MATERIALS, SAM - CONAMET 2014 (2015)

Add to Collection

Article Polymer Science

Mechanical and thermal properties of nanosized titanium dioxide filled rigid poly(vinyl chloride)

Yun-xiang Zhang et al.

CHINESE JOURNAL OF POLYMER SCIENCE (2013)

Add to Collection

Article Polymer Science

Surface properties of graphene oxide reinforced polyvinyl chloride nanocomposites

Kalim Deshmukh et al.

JOURNAL OF POLYMER RESEARCH (2013)

Add to Collection

Article Materials Science, Composites

Study of the effect of silica nanofillers on the sea-water diffusion barrier property of unsaturated polyester composites

Nilesh Maheshwari et al.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2013)

Add to Collection

Article Chemistry, Applied

Effects of Some PVC-Grafted Maleic Anhydrides (PVC-g-MAs) on the Morphology, and the Mechanical and Thermal Properties of (Alfa Fiber)-Reinforced PVC Composites

Dalila Hammiche et al.

JOURNAL OF VINYL & ADDITIVE TECHNOLOGY (2013)

Add to Collection

Article Polymer Science

High dielectric constant and superparamagnetic polymer-based nanocomposites induced by percolation effect

Xinming Wang et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2012)

Add to Collection

Article Polymer Science

Dielectric relaxation behavior and electrical conduction mechanism in polymer-ceramic composites based on Sr modified Barium Zirconium Titanate ceramic

V. Senthil et al.

JOURNAL OF POLYMER RESEARCH (2012)

Add to Collection

Article Materials Science, Composites

Characterization and DC electrical conductivity of the composite films containing polyaniline-carboxymethyl cellulose

C. Basavaraja et al.

POLYMER COMPOSITES (2012)

Add to Collection

Article Chemistry, Physical

On the correlation between bond-length change and vibrational frequency shift in halogen-bonded complexes

Weizhou Wang et al.

JOURNAL OF CHEMICAL PHYSICS (2011)

Add to Collection

Article Chemistry, Applied

Effect of Nanocalcium Carbonate on the Impact Strength and Accelerated Weatherability of Rigid Poly(vinyl chloride)/Acrylic Impact Modifier

Wilaiporn Chetanachan et al.

JOURNAL OF VINYL & ADDITIVE TECHNOLOGY (2011)

Add to Collection

Article Materials Science, Composites

DC and AC Conductivity in Epoxy Resin/Multiwall Carbon Nanotubes Percolative System

A. Vavouliotis et al.

POLYMER COMPOSITES (2010)

Add to Collection

Article Chemistry, Physical

Fabrication of copper-alumina nanocomposites by mechano-chemical routes

F. Shehata et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2009)

Add to Collection

Article Engineering, Chemical

High-Strength Composites Based on Tung Oil Polyurethane and Wood Flour: Effect of the Filler Concentration on the Mechanical Properties

U. Casado et al.

POLYMER ENGINEERING AND SCIENCE (2009)

Add to Collection

Article Chemistry, Applied

Preparation of PVC-clay nanocomposites by solution blending

DY Wang et al.

JOURNAL OF VINYL & ADDITIVE TECHNOLOGY (2002)

Add to Collection

Article Chemistry, Applied

Review of specialty PVC resins

AC Shah et al.

JOURNAL OF VINYL & ADDITIVE TECHNOLOGY (2002)

Add to Collection

Article Chemistry, Physical

Heats of adsorption of CO on a Cu/Al2O3 catalyst using FTIR spectroscopy at high temperatures and under adsorption equilibrium conditions

O Dulaurent et al.

JOURNAL OF PHYSICAL CHEMISTRY B (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.