Related references
Note: Only part of the references are listed.Mechanical reliability of Ce0.8Gd0.2O2-δ-FeCo2O4 dual phase membranes synthesized by one-step solid-state reaction
Fanlin Zeng et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2021)
Optimization of sintering conditions for improved microstructural and mechanical properties of dense Ce0.8Gd0.2O2-delta-FeCo2O4 oxygen transport membranes
Fanlin Zeng et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)
Enhancing oxygen permeation of solid-state reactive sintered Ce0.8Gd0.2O2-?-FeCo2O4 composite by optimizing the powder preparation method
Fanlin Zeng et al.
JOURNAL OF MEMBRANE SCIENCE (2021)
Fracture behavior of solid electrolyte LATP material based on micro-pillar splitting method
Gang Yan et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)
Micromechanical Characterization of Ce0.8Gd0.2O2-δ-FeCo2O4 Dual Phase Oxygen Transport Membranes
Fanlin Zeng et al.
ADVANCED ENGINEERING MATERIALS (2020)
Quantitative multi-scale characterization of single basalt fibres: Insights into strength loss mechanisms after thermal conditioning
Matteo Lilli et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Insights on the Interfacial Processes Involved in the Mechanical and Redox Stability of the BaCe0.65Zr0.20Y0.15O3-δ-Ce0.85Gd0.15O2-δ Composite
Cecilia Mortalo et al.
ACS APPLIED ENERGY MATERIALS (2020)
Mechanical properties of BaCe0.65Zr0.2Y0.15O3-δ proton-conducting material determined using different nanoindentation methods
Wenyu Zhou et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)
Mechanical and oxidation behavior of textured Ti2AlC and Ti3AlC2 MAX phase materials
Xiaoqiang Li et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)
A review of experimental approaches to fracture toughness evaluation at the micro-scale
J. Ast et al.
MATERIALS & DESIGN (2019)
Optimal sintering temperature for Ce0.9Gd0.1O2-δ-La0.6Sr0.4Co0.2Fe0.8O3-δ composites evaluated through their microstructural, mechanical and elastic properties
Kati Raju et al.
CERAMICS INTERNATIONAL (2019)
Structural evolution of BaCe0.65Zr0.20Y0.15O3-δ-Ce0.85Gd0.15O2-δ composite MPEC membrane by in-situ synchrotron XRD analyses
Cecilia Mortalo et al.
MATERIALS TODAY ENERGY (2019)
Enhanced sulfur tolerance of BaCe0.65Zr0.20Y0.15O3-delta-Ce0.85Gd0.15O2-delta composite for hydrogen separation membranes
C. Mortalo et al.
JOURNAL OF MEMBRANE SCIENCE (2018)
A case study of mechanical properties of perovskite-structured Ba0.5Sr0.5Co0.8Fe0.2O3-δ oxygen transport membrane
Li Wang et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2018)
Mechanical properties of the solid electrolyte Al-substituted Li7La3Zr2O12 (LLZO) by utilizing micro-pillar indentation splitting test
An-Ni Wang et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2018)
Fracture of Silicon: Influence of rate, positioning accuracy, FIB machining, and elevated temperatures on toughness measured by pillar indentation splitting
C. M. Lauener et al.
MATERIALS & DESIGN (2018)
Fabrication and hydrogen permeation through novel BaZr0.9Y0.1O3-δ - Cu composite ceramic-metallic membranes
Wade A. Rosensteel et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)
Effects of indenter angle on micro-scale fracture toughness measurement by pillar splitting
Matteo Ghidelli et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2017)
Mechanical properties and lifetime predictions of dense SrTi1-xFexO3-δ (x=0.25, 0.35, 0.5)
R. Oliveira Silva et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2017)
On the compatibility of dual phase BaCe0.65Zr0.2Y0.15O3-based membrane for hydrogen separation application
Daniel Montaleone et al.
CERAMICS INTERNATIONAL (2017)
A Comparison of Microscale Techniques for Determining Fracture Toughness of LiMn2O4 Particles
Muhammad Zeeshan Mughal et al.
MATERIALS (2017)
Tape-cast asymmetric membranes for hydrogen separation
Elisa Mercadelli et al.
CERAMICS INTERNATIONAL (2017)
Mechanical properties of LSCF (La0.6Sr0.4Co0.2Fe0.8O3-δ,)-GDC (Ce0.9Gd0.1O2-δ) for oxygen transport membranes
Seyoung Kim et al.
CERAMICS INTERNATIONAL (2017)
Effect of carbon content on the mechanical behavior of MgO-C refractories characterized by Hertzian indentation
Kee Sung Lee et al.
CERAMICS INTERNATIONAL (2016)
Mechanical properties of tape casted Lanthanum Tungstate for membrane substrate application
V. Stournari et al.
CERAMICS INTERNATIONAL (2016)
Hydrogen permeation through dense BaCe0.8Y0.2O3-δ - Ce0.8Y0.2O2-δ composite-ceramic hydrogen separation membranes
Wade A. Rosensteel et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)
Chemical stability and H2 flux degradation of cercer membranes based on lanthanum tungstate and lanthanum chromite
Jonathan M. Polfus et al.
JOURNAL OF MEMBRANE SCIENCE (2016)
Proton-conducting electrolytes for direct methanol and direct urea fuel cells - A state-of-the-art review
Nikdalila Radenahmad et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)
Effect of lithiation on micro-scale fracture toughness of LixMn2O4 cathode
Muhammad Zeeshan Mughal et al.
SCRIPTA MATERIALIA (2016)
Analysis of the full stress tensor in a micropillar: Ability of and difficulties arising during synchrotron based μLaue diffraction
Anton Davydok et al.
MATERIALS & DESIGN (2016)
Hydrogen separation through tailored dual phase membranes with nominal composition BaCe0.8Eu0.2O3-δ:Ce0.8Y0.2O2-δ at intermediate temperatures
Mariya E. Ivanova et al.
SCIENTIFIC REPORTS (2016)
Symmetry reduction due to gallium substitution in the garnet Li6.43(2)Ga0.52(3)La2.67(4)Zr2O12
Lars Robben et al.
ACTA CRYSTALLOGRAPHICA SECTION E-CRYSTALLOGRAPHIC COMMUNICATIONS (2016)
Grid indentation analysis of mechanical properties of composite electrodes in Li-ion batteries
Luize Scalco de Vasconcelos et al.
EXTREME MECHANICS LETTERS (2016)
Enhanced stability of Zr-doped Ba(CeTb)O3-δ-Ni cermet membrane for hydrogen separation
Yanying Wei et al.
CHEMICAL COMMUNICATIONS (2015)
Measurement of fracture toughness by nanoindentation methods: Recent advances and future challenges
M. Sebastiani et al.
CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2015)
Exceptional hydrogen permeation of all-ceramic composite robust membranes based on BaCe0.65Zr0.20Y0.15O3-delta and Y- or Gd-doped ceria
Elena Rebollo et al.
ENERGY & ENVIRONMENTAL SCIENCE (2015)
A novel pillar indentation splitting test for measuring fracture toughness of thin ceramic coatings
M. Sebastiani et al.
PHILOSOPHICAL MAGAZINE (2015)
Microstructural adjustment of Ni-BaCe0.9Y0.1O3-δ cermet membrane for improved hydrogen permeation
Hyejin Kim et al.
CERAMICS INTERNATIONAL (2014)
Studies on mechanical behavior of LSFT-CGO dual-phase membranes at elevated temperatures in ambient air and slightly reducing environments
Thangamani Nithyanantham et al.
CERAMICS INTERNATIONAL (2014)
Outstanding hydrogen permeation through CO2-stable dual-phase ceramic membranes
S. Escolastico et al.
ENERGY & ENVIRONMENTAL SCIENCE (2014)
Hydrogen permeability and chemical stability of Ni-BaZr0.1Ce0.7Y0.1Yb0.1O3-δ membrane in concentrated H2O and CO2
Shumin Fang et al.
JOURNAL OF MEMBRANE SCIENCE (2014)
Improved Fracture Behavior of Alumina Microstructural Composites with Highly Textured Compressive Layers
Yunfei Chang et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2014)
Synthesis by spark plasma sintering of a novel protonic/electronic conductor composite: BaCe0.2Zr0.7Y0.1O3-δ /Sr0.95Ti0.9Nb0.1O3-δ (BCZY27/STN95)
Jason S. Fish et al.
JOURNAL OF MATERIALS SCIENCE (2013)
Synthesis, stability and conductivity of BaCe0.8-xZrxY0.2O3-δ as electrolyte for proton conducting SOFC
Pooja Sawant et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2012)
NIH Image to ImageJ: 25 years of image analysis
Caroline A. Schneider et al.
NATURE METHODS (2012)
Synthesis and hydrogen permeation of Ni-Ba(Zr0.1Ce0.7Y0.2) O3-δ metal-ceramic asymmetric membranes
Zhiwen Zhu et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2011)
Depth-resolved residual stress analysis of thin coatings by a new FIB-DIC method
Marco Sebastiani et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Residual stress measurement at the micrometer scale: focused ion beam (FIB) milling and nanoindentation testing
M. Sebastiani et al.
PHILOSOPHICAL MAGAZINE (2011)
H2S poisoning and regeneration of Ni-BaZr0.1Ce0.7Y0.2O3-δ at intermediate temperature
Shumin Fang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2009)
Role of synthetic route on the transport properties of BaCe1-xYxO3 proton conductor
Gaetano Chiodelli et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2009)
Nanoindentation analysis as a two-dimensional tool for mapping the mechanical properties of complex surfaces
Nicholas X. Randall et al.
JOURNAL OF MATERIALS RESEARCH (2009)
Chemical stability of Y-doped Ba(Ce,Zr)O-3 perovskites in H2S-containing H-2
Jinxia Li et al.
ELECTROCHIMICA ACTA (2008)
Barium Non-Stoichiometry Role on the Properties of Ba1+xCe0.65Zr0.20Y0.15O3-δ Proton Conductors for IT-SOFCs
S. Barison et al.
FUEL CELLS (2008)
Synthesis and reactivity study of gadolinia doped ceria-nickel: A potential anode material for solid oxide fuel cell
Pradyot Datta et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2008)
High conductivity and chemical stability of BaCe1-x-yZrxYyO3-delta proton conductors prepared by a sol-gel method
Simona Barison et al.
JOURNAL OF MATERIALS CHEMISTRY (2008)
Mixed ionic-electronic conducting (MIEC) ceramic-based membranes for oxygen separation
J. Sunarso et al.
JOURNAL OF MEMBRANE SCIENCE (2008)
The effect of grain size on the low-temperature electrical conductivity of doped CeO2
Young Jin Kang et al.
SOLID STATE IONICS (2008)
Tailoring the chemical stability of Ba(Ce0.8-xZrx)Y0.2O3-δ protonic conductors for Intermediate Temperature Solid Oxide Fuel Cells (IT-SOFCs)
Emiliana Fabbri et al.
SOLID STATE IONICS (2008)
Conductivity studies of dense yttrium-doped BaZrO3 sintered at 1325 °C
Shanwen Tao et al.
JOURNAL OF SOLID STATE CHEMISTRY (2007)
On the Vickers indentation fracture toughness test
George D. Quinn et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2007)
Recent advances in single-chamber solid oxide fuel cells: A review
Masaya Yano et al.
SOLID STATE IONICS (2007)
Composite Ni-Ba(Zr0.1Ce0.7Y0.2)O3 membrane for hydrogen separation
Chendong Zuo et al.
JOURNAL OF POWER SOURCES (2006)
Effect of Zr-doping on the chemical stability and hydrogen permeation of the Ni-BaCe0.8Y0.2O3-α mixed protonic-electronic conductor
Chendong Zuo et al.
CHEMISTRY OF MATERIALS (2006)
Grid indentation analysis of composite microstructure and mechanics: Principles and validation
G. Constantinides et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
Review of proton conductors for hydrogen separation
J. W. Phair et al.
IONICS (2006)
Protonic conductivity nanostructured ceramic film with improved resistance to carbon dioxide at elevated temperatures
XQ Ma et al.
SURFACE & COATINGS TECHNOLOGY (2005)
Preparation, sintering, and water incorporation of proton conducting Ba0.99Zr0.8Y0.2O3-δ:: comparison between three different synthesis techniques
A Magrez et al.
SOLID STATE IONICS (2004)
Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology
WC Oliver et al.
JOURNAL OF MATERIALS RESEARCH (2004)
Transport in proton conductors for fuel-cell applications: Simulations, elementary reactions, and phenomenology
KD Kreuer et al.
CHEMICAL REVIEWS (2004)
Protonic conduction in Zr-substituted BaCeO3
K Katahira et al.
SOLID STATE IONICS (2000)
Mechanical behaviour of ceramic oxygen ion-conducting membranes
A Atkinson et al.
SOLID STATE IONICS (2000)
Share Paper
