Related references
Note: Only part of the references are listed.Friction and wear performance evaluation of UHMWPE using Taguchi based grey approach: A study on the influence of load and bio-serum lubrication
Omar Hussain et al.
MATERIALS CHEMISTRY AND PHYSICS (2020)
Multi-objective optimization of parameters affecting Organic Rankine Cycle performance characteristics with Taguchi-Grey Relational Analysis
A. H. Bademlioglu et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2020)
Investigations into the effect of process parameters on surface roughness and burr formation during micro end milling of TI-6AL-4V
K. Vipindas et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Investigation on the performance of AlCrN and AlTiN coated cemented carbide inserts during end milling of maraging steel under dry, wet and cryogenic environments
Vinay Varghese et al.
JOURNAL OF MANUFACTURING PROCESSES (2019)
Performance optimization of absorption refrigeration systems using Taguchi, ANOVA and Grey Relational Analysis methods
A. S. Canbolat et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Optimization of process parameters of metal inert gas welding with preheating on AISI 1018 mild steel using grey based Taguchi method
Sudhir Kumar et al.
MEASUREMENT (2019)
Effect of cryogenic treatment on the microstructure and the wear behavior of WC-Co end mills for machining of Ti6Al4V titanium alloy
Osman Nuri Celik et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Improvement of cutting performance of carbide cutting tools in milling of the Inconel 718 superalloy using multilayer nanocomposite hard coating and cryogenic heat treatment
Bilal Kursuncu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Influences of tool structure, tool material and tool wear on machined surface integrity during turning and milling of titanium and nickel alloys: a review
Bing Wang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Multi-objective optimization of chip-tool interaction parameters using Grey-Taguchi method in MQL-assisted turning
Mozammel Mia et al.
MEASUREMENT (2018)
Machining performance and tool wear analysis on cryogenic treated insert during end milling of Ti-6Al-4V alloy
Vinothkumar Sivalingam et al.
JOURNAL OF MANUFACTURING PROCESSES (2018)
Experimental investigation of machinability characteristics and multi-response optimization of end milling in aluminium composites using RSM based grey relational analysis
B. Rajeswari et al.
MEASUREMENT (2017)
Comparative study of some machinability aspects in turning of pure titanium with untreated and cryogenically treated carbide inserts
Akhtar Khan et al.
JOURNAL OF MANUFACTURING PROCESSES (2017)
Performance and wear analysis of polycrystalline diamond (PCD) tools manufactured with different methods in turning titanium alloy Ti-6Al-4V
Guangxian Li et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
Investigation on the influence of tool wear upon chip morphology in end milling titanium alloy Ti6Al4V
Zhaoju Zhu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
Multi-objective Optimization of FSW Process Parameters of Aluminium Alloy Using Taguchi-Based Grey Relational Analysis
N. D. Ghetiya et al.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2016)
Measurement and optimization of surface roughness and tool wear via grey relational analysis, TOPSIS and RSA techniques
S. Ramesh et al.
MEASUREMENT (2016)
Effects of cutting parameters on dry machining Ti-6Al-4V alloy with ultra-hard tools
F. J. Sun et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
The effect of aCN/TiAlN coating on tool wear, cutting force, surface finish and chip morphology in face milling of Ti6Al4V superalloy
Halil Caliskan et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2015)
Surface topography analysis and cutting parameters optimization for peripheral milling titanium alloy Ti-6Al-4V
Dong Yang et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2015)
Multi-response optimization of minimum quantity lubrication parameters using Taguchi-based grey relational analysis in turning of difficult-to-cut alloy Haynes 25
Murat Sarikaya et al.
JOURNAL OF CLEANER PRODUCTION (2015)
Milling behavior of Hadfield steel with cryogenically treated tungsten carbide inserts
Ergun Ekici
MATERIALS TESTING (2015)
Wear behaviour of PVD coated and cryogenically treated tools for Ti-6Al-4V turning
Matteo Strano et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2015)
Effects of cutting conditions on the milling process of titanium alloy Ti6Al4V
Hongbing Wu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
Problems and solutions in machining of titanium alloys
A. Pramanik
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)
Cutting Force and Surface Roughness Characterization in Cryogenic High-Speed End Milling of Ti-6Al-4V ELI
H. Safari et al.
MATERIALS AND MANUFACTURING PROCESSES (2014)
A method for identification of geometrical tool changes during machining of titanium alloy Ti6Al4V
Manouchehr Vosough et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
Multi-objective optimization of milling parameters - the trade-offs between energy, production rate and cutting quality
Jihong Yan et al.
JOURNAL OF CLEANER PRODUCTION (2013)
Multi-objective optimization using Taguchi based grey relational analysis for micro-milling of Al 7075 material with ball nose end mill
Emel Kuram et al.
MEASUREMENT (2013)
Analysis of Process Parameters in Wire EDM with Stainless Steel using Single Objective Taguchi Method and Multi Objective Grey Relational Grade
M. Durairaj et al.
INTERNATIONAL CONFERENCE ON DESIGN AND MANUFACTURING (ICONDM2013) (2013)
Study of surface quality in high speed turning of Inconel 718 with uncoated and coated CBN tools
Jinming Zhou et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2012)
Determination of optimum parameters with multi-performance characteristics in laser drilling-A grey relational analysis approach
Sumanta Panda et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2011)
New observations on tool life, cutting forces and chip morphology in cryogenic machining Ti-6Al-4V
M. J. Bermingham et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2011)
Investigations on the effects of multi-layered coated inserts in machining Ti-6Al-4V alloy with experiments and finite element simulations
T. Ozel et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2010)
Machinability improvement of titanium alloy (Ti-6Al-4V) via LAM and hybrid machining
Chinmaya R. Dandekar et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2010)
Comparison of the machinabilities of Ti6Al4V and TIMETAL® 54M using uncoated WC-Co tools
M. Armendia et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2010)
Influence of sub-zero treatments on fracture toughness of AISI D2 steel
Debdulal Das et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Performance analysis of cryogenically treated coated carbide inserts
K. Vadivel et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2009)
Wear behaviour of cryogenically treated tungsten carbide inserts under dry and wet turning conditions
Simranpreet Singh Gill et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2009)
Characteristics of cutting forces and chip formation in machining of titanium alloys
S. Sun et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2009)
Machinability of C45 steel with deep cryogenic treated tungsten carbide cutting tool inserts
T. V. SreeramaReddy et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2009)
Inconsistent wear behaviour of cryotreated tool steels: role of mode and mechanism
D. Das et al.
MATERIALS SCIENCE AND TECHNOLOGY (2009)
Influence of temperature of sub-zero treatments on the wear behaviour of die steel
D. Das et al.
WEAR (2009)
Influence of varied cryotreatment on the wear behavior of AISI D2 steel
D. Dasa et al.
WEAR (2009)
On the enhancement of wear resistance of tool steels by cryogenic treatment
D. Das et al.
PHILOSOPHICAL MAGAZINE LETTERS (2008)
An investigation of cutting forces and surface damage in high-speed turning of Inconel 718
R. S. Pawade et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2007)
Effectiveness of uncoated WC-Co and PCD inserts in end milling of titanium alloy-Ti-6Al-4V
A. K. M. Nurul Amin et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2007)
Performance of cryogenically treated tungsten carbide tools in milling operations
A. Y. L. Yong et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2007)
The influence of feed rate and cutting speed on the cutting forces, surface roughness and tool-chip contact length during face milling
I. Korkut et al.
MATERIALS & DESIGN (2007)
Effect of deep cryogenic treatment on the carbide precipitation and tribological behavior of D2 steel
D. Das et al.
MATERIALS AND MANUFACTURING PROCESSES (2007)
Key improvements in the machining of difficult-to-cut aerospace superalloys
EO Ezugwu
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2005)
Performance evaluation of cryogenically treated tungsten carbide cutting tool inserts
KHW Seah et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2003)
Evaluation of wear mechanisms of coated carbide tools when face milling titanium alloy
A Jawaid et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2000)
Share Paper
