☆ 4.4 Article

Seismic Damage Assessment and Shaking-Table Test Validation of Midrise Cold-Formed Steel Composite Shear Wall Buildings

JOURNAL OF STRUCTURAL ENGINEERING (2022)

Related references

Note: Only part of the references are listed.

Article Engineering, Civil

Methodology for the Development of Analytical Seismic Fragility for Full Connection Steel-Framed Gypsum Partition Walls

Hamidreza Salmasi Javid et al.

Summary: Understanding the behavior of gypsum partition walls and their fragility curves is crucial for seismic risk assessment of buildings. Although several experimental and analytical simulations have been developed for partition walls in the past two decades, their fragility curves are limited to specific geometries due to high experimental costs and a lack of robust methodologies. This study presents a practical methodology for obtaining analytical-based seismic fragility curves, validated against values from FEMA P-58.

JOURNAL OF EARTHQUAKE ENGINEERING (2022)

Add to Collection

Article Engineering, Civil

Updated seismic fragility functions for cold-formed steel framed shear walls per FEMA P-58 methodology

Fardad Haghpanah et al.

Summary: Performance-based earthquake engineering offers a robust alternative to traditional design, allowing estimation of damage and economic losses to drive innovative solutions.

ENGINEERING STRUCTURES (2021)

Add to Collection

Article Engineering, Civil

Study on shear performance of cold-formed thin-walled steel walls sheathed by paper straw board

Xiuhua Zhang et al.

Summary: The shear performance of paper straw board composite walls in CFS structures was studied through experiments and finite element analysis, showing that adding diagonal braces and setting paper straw board can significantly improve the shear capacity of walls. A formula for calculating the shear capacity of the composite wall was proposed based on the research results, which can provide a reference for engineering design.

ENGINEERING STRUCTURES (2021)

Add to Collection

Article Construction & Building Technology

High-Fidelity Finite Element Modeling of Wood-Sheathed Cold-Formed Steel Shear Walls

Fani Derveni et al.

Summary: The study aims to numerically assess the performance of CFS-framed shear walls and develop a robust three-dimensional high-fidelity finite element model, with particular attention to the fundamental role of connections and validation through experiments and parametric analysis.

JOURNAL OF STRUCTURAL ENGINEERING (2021)

Add to Collection

Article Engineering, Civil

Experimental and numerical study of the seismic behavior of cold-formed steel walls with diagonal braces

Yu Shi et al.

Summary: This paper studies the seismic performance of cold-formed thin-walled steel walls with diagonal braces through experiments and finite element analysis. It was found that diagonal brace significantly improves the load-bearing capacity, stiffness, and energy dissipation capacity of the walls, while the lateral resistance only slightly increased due to premature buckling of transverse braces.

THIN-WALLED STRUCTURES (2021)

Add to Collection

Article Engineering, Civil

High-strength cold-formed steel framed shear wall with steel sheet sheathing

Wenying Zhang et al.

Summary: The North American specifications provide tabulated values and equations for designing cold-formed steel framed shear walls with steel sheet sheathing. Research has shown that increasing the thickness and screw density can enhance the shear strength of high-strength CFS framed shear walls.

THIN-WALLED STRUCTURES (2021)

Add to Collection

Article Engineering, Civil

Seismic behavior and damage assessment of mid-rise cold-formed steel-framed buildings with normal and reinforced beam-column joints

Liqiang Jiang et al.

Summary: This study investigated the effects of reinforced beam-column joints on the seismic behavior and damages of mid-rise CFS framed buildings through shaking table tests. The results show that the reinforced joints can reduce plastic deformation and damage levels significantly, while appropriate damage models are more accurate for assessing column bases but tend to overestimate damages in CFS beams. It suggests using maximum damage indexes obtained from simplified formulas as preliminary assessments for mid-rise CFS buildings.

ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2021)

Add to Collection

Article Construction & Building Technology

Synergistic shear behaviour of cold-formed steel shear walls and reinforced edge struts

Wang Xingxing et al.

Summary: The study investigated the shear behavior and calculation method of C-CFS shear walls, showing that the system has higher shear capacity and elastic stiffness compared to conventional CFS shear walls, with better energy dissipation capacity and ductility. The synergistic interaction between reinforced edge struts and the interior shear wall forms a reliable lateral resistant system.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2021)

Add to Collection

Article Construction & Building Technology

Earthquake and Postearthquake Fire Testing of a Midrise Cold-Formed Steel-Framed Building. I: Building Response and Physical Damage

Tara C. Hutchinson et al.

Summary: A multidisciplinary experimental program was conducted on the Large High-Performance Outdoor Shake Table (LHPOST) at the University of California, San Diego (UCSD) to advance understanding of the multihazard performance of midrise cold-formed steel (CFS) construction. The project involved earthquake and live fire testing of a full-scale 6-story CFS wall braced building, followed by postfire earthquake tests. The aim was to collect dynamic state data of the building system and study the structural responses and physical damage features throughout the earthquake-fire-earthquake test phases.

JOURNAL OF STRUCTURAL ENGINEERING (2021)

Add to Collection

Article Engineering, Civil

Seismic responses and damage assessment of a mid-rise cold-formed steel building under far-fault and near-fault ground motions

Yi Hu et al.

Summary: The study highlights the significant effects of near-fault ground motions on cold-formed steel structures, suggesting the consideration of this factor in seismic design. The Park-Ang seismic damage index is recommended for a more appropriate seismic design of CFS buildings.

THIN-WALLED STRUCTURES (2021)

Add to Collection

Article Engineering, Geological

Quantifying the effects of various uncertainties on seismic risk assessment of CFS structures

Liqiang Jiang et al.

BULLETIN OF EARTHQUAKE ENGINEERING (2020)

Add to Collection

Article Construction & Building Technology

An energy dissipating hold down device for cold-formed steel structures

Bads Mert Pehlivan et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2020)

Add to Collection

Article Engineering, Civil

Collapse mechanism and shaking table test validation of a 3D mid-rise CFS composite shear wall building

Liqiang Jiang et al.

THIN-WALLED STRUCTURES (2020)

Add to Collection

Article Construction & Building Technology

Lateral performance of a new hybrid CFS shear wall panel for mid-rise construction

Nima Usefi et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2020)

Add to Collection

Article Engineering, Civil

Damage index fragility assessment of low-rise light-frame wood buildings under long duration subduction earthquakes

Yuxin Pan et al.

STRUCTURAL SAFETY (2020)

Add to Collection

Article Engineering, Civil

Behavior factor evaluation of CFS wood sheathed shear walls according to FEMA P695 for Eurocodes

Sarmad Shakeel et al.

ENGINEERING STRUCTURES (2020)

Add to Collection

Article Construction & Building Technology

Cyclic performance of K-braced cold-formed steel shear walls with concrete-filled steel- tubular struts

Wang Xingxing et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2020)

Add to Collection

Article Engineering, Geological

Correlation between earthquake intensity parameters and damage indices of high-rise RC chimneys

Yikun Qiu et al.

SOIL DYNAMICS AND EARTHQUAKE ENGINEERING (2020)

Add to Collection

Article Construction & Building Technology

Seismic performance of CFS strap-braced walls using capacity-based design approach

Shahrzad Kasaeian et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2020)

Add to Collection

Article Engineering, Geological

Shake table tests of three storey cold-formed steel structures with strap-braced walls

Luigi Fiorino et al.

BULLETIN OF EARTHQUAKE ENGINEERING (2019)

Add to Collection

Review Engineering, Civil

Numerical models for lateral behaviour analysis of cold-formed steel framed walls: State of the art, evaluation and challenges

Nima Usefi et al.

THIN-WALLED STRUCTURES (2019)

Add to Collection

Article Construction & Building Technology

Numerical and experimental investigation on cold-formed walls sheathed by fiber cement board

Ahmed R. Badr et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2019)

Add to Collection

Article Construction & Building Technology

Seismic Damage Assessment Indexes for Masonry Structures

Qiwang Su et al.

JOURNAL OF STRUCTURAL ENGINEERING (2019)

Add to Collection

Review Engineering, Civil

Lightweight steel framed systems in seismic areas: Current achievements and future challenges

Raffaele Landolfo

THIN-WALLED STRUCTURES (2019)

Add to Collection

Article Engineering, Civil

Behaviour factor evaluation of CFS shear walls with gypsum board sheathing according to FEMA P695 for Eurocodes

Sarmad Shakeel et al.

THIN-WALLED STRUCTURES (2019)

Add to Collection

Article Engineering, Civil

Effects of ground motion duration on the seismic damage to and collapse capacity of a mid-rise woodframe building

Yuxin Pan et al.

ENGINEERING STRUCTURES (2019)

Add to Collection

Article Construction & Building Technology

Flexural Behaviour and Design of Cold-Formed Steel Wall Panels Sheathed with Particle Cement Board

Sivaganesh Selvaraj et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2019)

Add to Collection

Article Engineering, Civil

Seismic performance of cold-formed steel framed shear walls with steel sheathing and gypsum board

Ruo-qiang Feng et al.

THIN-WALLED STRUCTURES (2019)

Add to Collection

Article Construction & Building Technology

Damage assessment of squat, thin and lightly-reinforced concrete walls by the Park & Ang damage index

Julian Carrillo et al.

JOURNAL OF BUILDING ENGINEERING (2019)

Add to Collection

Article Engineering, Civil

Redundancy of a mid-rise CFS composite shear wall building based on seismic response sensitivity analysis

Liqiang Jiang et al.

ENGINEERING STRUCTURES (2019)

Add to Collection

Article Construction & Building Technology

Lateral behaviour of hybrid cold-formed and hot-rolled steel wall systems: Experimental investigation

Mina Mortazavi et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2018)

Add to Collection

Article Engineering, Geological

Seismic fragility for high CFRDs based on deformation and damage index through incremental dynamic analysis

Rui Pang et al.

SOIL DYNAMICS AND EARTHQUAKE ENGINEERING (2018)

Add to Collection

Article Green & Sustainable Science & Technology

Simplified Analytical Model and Shaking Table Test Validation for Seismic Analysis of Mid-Rise Cold-Formed Steel Composite Shear Wall Building

Jihong Ye et al.

SUSTAINABILITY (2018)

Add to Collection

Article Construction & Building Technology

Seismic fragility analysis of steel reinforced concrete frame structures based on different engineering demand parameters

Chengxiang Xu et al.

JOURNAL OF BUILDING ENGINEERING (2018)

Add to Collection

Article Engineering, Civil

Seismic Risk Assessment of a 2-storey Steel-sheathed CFS Building Considering Different Sources of Uncertainty

Liqiang Jiang et al.

STRUCTURES (2018)

Add to Collection

Article Engineering, Geological

Seismic assessment of cold-formed steel stud bracing wall panels using direct displacement based design approach

Rojit Shahi et al.

BULLETIN OF EARTHQUAKE ENGINEERING (2017)

Add to Collection

Article Engineering, Civil

Shake table tests of a full-scale two-story sheathing-braced cold-formed steel building

Luigi Fiorino et al.

ENGINEERING STRUCTURES (2017)

Add to Collection

Article Engineering, Civil

Modeling seismic response of a full-scale cold-formed steel-framed building

Jiazhen Leng et al.

ENGINEERING STRUCTURES (2017)

Add to Collection

Article Construction & Building Technology

Behaviour factor (q) evaluation the CFS braced structures according to FEMA P695

Luigi Fiorino et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2017)

Add to Collection

Article Construction & Building Technology

Improved equivalent bracing model for seismic analysis of mid-rise CFS structures

Xingxing Wang et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2017)

Add to Collection

Article Construction & Building Technology

The seismic performance of K-braced cold-formed steel shear panels with improved connections

Omid Pourabdollah et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2017)

Add to Collection

Article Engineering, Civil

Analytical model for the in-plane seismic performance of cold-formed steel-framed gypsum partition walls

Esmaeel Rahmanishamsi et al.

EARTHQUAKE ENGINEERING & STRUCTURAL DYNAMICS (2016)

Add to Collection

Article Construction & Building Technology

Experimental Seismic Response of a Full-Scale Cold-Formed Steel-Framed Building. I: System-Level Response

Kara D. Peterman et al.

JOURNAL OF STRUCTURAL ENGINEERING (2016)

Add to Collection

Article Construction & Building Technology

Performance-based evaluation of strap-braced cold-formed steel frames using incremental dynamic analysis

M. R. Davani et al.

STEEL AND COMPOSITE STRUCTURES (2016)

Add to Collection

Article Construction & Building Technology

Experimental Seismic Response of a Full-Scale Cold-Formed Steel-Framed Building. I: System-Level Response

Kara D. Peterman et al.

JOURNAL OF STRUCTURAL ENGINEERING (2016)

Add to Collection

Article Engineering, Civil

Seismic Response and Engineering of Cold-formed Steel Framed Buildings

B. W. Schafer et al.

STRUCTURES (2016)

Add to Collection

Article Construction & Building Technology

Seismic capacity-based design of narrow strap-braced cold-formed steel walls

A. Mirzaei et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2015)

Add to Collection

Article Construction & Building Technology

Computationally efficient fastener-based models of cold-formed steel shear walls with wood sheathing

S. G. Buonopane et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2015)

Add to Collection

Article Construction & Building Technology

Reversed cyclic performance of cold-formed steel shear walls with reinforced end studs

Xingxing Wang et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2015)

Add to Collection

Article Construction & Building Technology

Seismic Performance of Cold-Formed Steel Wall Systems in a Full-Scale Building

X. Wang et al.

JOURNAL OF STRUCTURAL ENGINEERING (2015)

Add to Collection

Article Engineering, Civil

Cyclic performance of cold-formed steel shear walls sheathed with double-layer wallboards on both sides

Jihong Ye et al.

THIN-WALLED STRUCTURES (2015)

Add to Collection

Article Construction & Building Technology

Seismic Performance of Cold-Formed Steel Wall Systems in a Full-Scale Building

X. Wang et al.

JOURNAL OF STRUCTURAL ENGINEERING (2015)

Add to Collection

Article Engineering, Civil

Design of steel sheathed cold-formed steel framed shear walls

N. Balh et al.

THIN-WALLED STRUCTURES (2014)

Add to Collection

Article Construction & Building Technology

Seismic Performance of an Innovative Light-Frame Cold-Formed Steel Frame for Midrise Construction

Thang Nguyen Dao et al.

JOURNAL OF STRUCTURAL ENGINEERING (2013)

Add to Collection

Article Construction & Building Technology

Dynamic Testing of Single- and Double-Story Steel-Sheathed Cold-Formed Steel-Framed Shear Walls

Iman Shamim et al.

JOURNAL OF STRUCTURAL ENGINEERING-ASCE (2013)

Add to Collection

Article Construction & Building Technology

Experimental Seismic Fragility of Cold-Formed Steel Framed Gypsum Partition Walls

Rodrigo Retamales et al.

JOURNAL OF STRUCTURAL ENGINEERING (2013)

Add to Collection

Article Engineering, Civil

Steel sheathed/CFS framed shear walls under dynamic loading: Numerical modelling and calibration

Iman Shamim et al.

THIN-WALLED STRUCTURES (2013)

Add to Collection

Article Engineering, Civil

A numerical study on seismic performance of strap-braced cold-formed steel shear walls

M. Zeynalian et al.

THIN-WALLED STRUCTURES (2012)

Add to Collection

Article Engineering, Civil

Estimation of the Park-Ang damage index for planar multi-storey frames using equivalent single-degree systems

Siddhartha Ghosh et al.

ENGINEERING STRUCTURES (2011)

Add to Collection

Article Construction & Building Technology

Damage Modeling and Damage Limit State Criterion for Wood-Frame Buildings Subjected to Seismic Loads

Hao Liang et al.

JOURNAL OF STRUCTURAL ENGINEERING-ASCE (2011)

Add to Collection

Article Engineering, Civil

Evaluation of the AISI S213 seismic design procedures through testing of strap braced cold-formed steel walls

K. Velchev et al.

THIN-WALLED STRUCTURES (2010)

Add to Collection

© Peeref 2019-2024. All rights reserved.