☆ 4.8 Article

Gradient doping Mg and Al to stabilize Ni-rich cathode materials for rechargeable lithium-ion batteries

JOURNAL OF POWER SOURCES (2022)

Related references

Note: Only part of the references are listed.

Article Electrochemistry

Crack-free single-crystalline Co-free Ni-rich LiNi0.95Mn0.05O2 layered cathode

Lianshan Ni et al.

Summary: This study successfully designed a robust single-crystalline, Co-free, Ni-rich cathode material, which has advantages over polycrystalline materials in terms of structural stability and cycling durability and can achieve high discharge capacity and high energy density, with good capacity retention.

ESCIENCE (2022)

Add to Collection

Article Chemistry, Physical

H3BO3 washed LiNi0.8Co0.1Mn0.1O2 with enhanced electrochemical performance and storage characteristics

Longzhen You et al.

Summary: A novel surface modification strategy using H3BO3 to clean the surface of NCM811 and convert residual lithium into a uniform lithium-boron compound layer improves lithium ion diffusion and electron transport, leading to higher discharge capacity and better capacity retention. With a layer of lithium-boron compounds, NCM811 becomes more resistant to corrosion by the electrolyte and shows better storage performance.

JOURNAL OF POWER SOURCES (2021)

Add to Collection

Article Chemistry, Physical

An in-depth understanding of the effect of aluminum doping in high-nickel cathodes for lithium-ion batteries

Kai Zhou et al.

Summary: Increasing the Al content in NCA from 0 to 5.6% gradually improves cycling, air stability, lattice structure, and interphase stability, but going beyond 5.6% leads to adverse effects. A 5.6% Al doping is suggested to be optimal, suppressing adverse effects and enhancing electrode/electrolyte interphases for improved performance.

ENERGY STORAGE MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

A novel trimethylsilyl 2-(fluorosulfonyl)difluoroacetate additive for stabilizing the Ni-rich LiNi0.9Co0.05Mn0.05O2/electrolyte interface

Tianpeng Jiao et al.

Summary: The research reveals that a stable CEI layer formed on the LiNi0.9Co0.05Mn0.05O2 cathode material through the addition of TMSFS multifunctional additive can significantly improve the cycling performance and electrochemical performance of lithium-ion batteries.

JOURNAL OF POWER SOURCES (2021)

Add to Collection

Article Engineering, Environmental

Enhanced cycling stability of Sn-doped Li[Ni0.90Co0.05Mn0.05]O-2 via optimization of particle shape and orientation

Trung Thien Nguyen et al.

Summary: The proposed Sn substitution method improves the cycling stability of Ni-rich layered cathodes by effectively suppressing microcrack formation and propagation. The microstructure-modified Sn-NCM90 cathode shows enhanced cycling performance with high capacity retention after multiple cycles.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Electrochemistry

The Synergistic Effect of Gd Modification on Improving the Electrochemical Performance of LiNi0.88Co0.09Al0.03O2 Cathode Materials

Yike Xiong et al.

Summary: The dual Gd-modified NCA material exhibited improved capacity and cycle life, as well as enhanced performance at high temperature and under fast charging conditions, providing a new idea for modification of Ni-rich layered cathode materials.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2021)

Add to Collection

Article Energy & Fuels

Reactive boride infusion stabilizes Ni-rich cathodes for lithium-ion batteries

Moonsu Yoon et al.

Summary: The use of engineered polycrystalline electrodes in lithium-ion batteries is crucial for cycling stability and safety, but achieving high-quality coatings at both the primary and secondary particle levels can be challenging. A coating-and-infusion approach using cobalt boride metallic glass on a Ni-rich layered cathode has been shown to significantly enhance performance, including rate capability and cycling stability under various conditions. The success of this approach is attributed to the simultaneous suppression of microstructural degradation and side reactions, as well as the critical role of strong selective interfacial bonding in ensuring uniform reactive wetting and facilitating infusion.

NATURE ENERGY (2021)

Add to Collection

Article Chemistry, Physical

Revealing the structural degradation mechanism of the Ni-rich cathode surface: How thick is the surface?

Yoon-Sok Kang et al.

Summary: The thickness of the phase-change region at the surface of Ni-rich NCM/graphite cylindrical cells significantly affects battery performance, leading to a sudden degradation. The deterioration in cell performance is mainly attributed to increasing diffusion resistance in the positive electrode.

JOURNAL OF POWER SOURCES (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Recent breakthroughs and perspectives of high-energy layered oxide cathode materials for lithium ion batteries

Junxiang Liu et al.

Summary: Ni-rich layered oxides (NRLOs) and Li-rich layered oxides (LRLOs) are promising cathode materials for lithium ion batteries (LIBs) due to their high energy density, low cost, and environmental friendliness. However, they face similar challenges such as capacity fading and different obstacles like thermal runaway for NRLOs and voltage decay for LRLOs. Strategies to improve their performance from different scales including ion-doping, microstructure designs, particle modifications, and electrode/electrolyte interface engineering are essential for their development.

MATERIALS TODAY (2021)

Add to Collection

Review Chemistry, Physical

Fundamental and solutions of microcrack in Ni-rich layered oxide cathode materials of lithium-ion batteries

Shouyi Yin et al.

Summary: This review discusses the challenges and solutions of modifying Ni-rich layered cathodes specifically for microcrack failure, including mechanisms of microcrack formation and evolution, recent advances in stabilizing the structure/interface of Ni-rich cathodes, and strategies to mitigate microcracks and improve electrochemical performance. Additionally, outlook and perspectives for practical application of Ni-rich layered cathodes in electric vehicles are provided.

NANO ENERGY (2021)

Add to Collection

Article Energy & Fuels

Concentration-Gradient LiNi0.85Co0.12Al0.03O2 Cathode Assembled with Primary Particles for Rechargeable Lithium-Ion Batteries

Yudong Zhang et al.

Summary: Concentration-gradient structure design is a promising strategy to stabilize layered nickel-rich LiNi1-x-yCoxAlyO2 (NCA) cathode materials. The influence of particle size on the properties of concentration-gradient NCA material was explored in this study. It was found that controlling the primary particle size is crucial in enhancing the performance of concentration-gradient Ni-rich cathode materials.

ENERGY & FUELS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Interfacial Regulation of Ni-Rich Cathode Materials with an Ion-Conductive and Pillaring Layer by Infusing Gradient Boron for Improved Cycle Stability

Wen Yang et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Chemistry, Physical

Evolution of the rate-limiting step: From thin film to thick Ni-rich cathodes

Jiangtao Hu et al.

JOURNAL OF POWER SOURCES (2020)

Add to Collection

Review Chemistry, Physical

Ni-Rich/Co-Poor Layered Cathode for Automotive Li-Ion Batteries: Promises and Challenges

Xinxin Wang et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Cobalt-Free High-Capacity Ni-Rich Layered Li[Ni0.9Mn0.1]O2 Cathode

Assylzat Aishova et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Energy & Fuels

High-nickel layered oxide cathodes for lithium-based automotive batteries

Wangda Li et al.

NATURE ENERGY (2020)

Add to Collection

Article Chemistry, Physical

Stabilizing surface chemical and structural Ni-rich cathode via a non-destructive surface reinforcement strategy

Kai Yuan et al.

NANO ENERGY (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Regulating the Grain Orientation and Surface Structure of Primary Particles through Tungsten Modification to Comprehensively Enhance the Performance of Nickel-Rich Cathode Materials

Wenjin Li et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Review Engineering, Chemical

Recent advances in Ni-rich layered oxide particle materials for lithium-ion batteries

Yong Lu et al.

PARTICUOLOGY (2020)

Add to Collection

Article Chemistry, Physical

Confined growth of primary grains towards stabilizing integrated structure of Ni-rich materials

Fanghui Du et al.

JOURNAL OF POWER SOURCES (2020)

Add to Collection

Article Chemistry, Physical

High-Energy W-Doped Li[Ni0.95Co0.04Al0.01]O2 Cathodes for Next-Generation Electric Vehicles

Un-Hyuck Kim et al.

ENERGY STORAGE MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Optimized Al Doping Improves Both Interphase Stability and Bulk Structural Integrity of Ni-Rich NMC Cathode Materials

Wengao Zhao et al.

ACS APPLIED ENERGY MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Revealing the Effect of Ti Doping on Significantly Enhancing Cyclic Performance at a High Cutoff Voltage for Ni-Rich LiNi0.8Co0.15Al0.05 O2 Cathode

Da Liu et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)

Add to Collection

Article Multidisciplinary Sciences

Lattice doping regulated interfacial reactions in cathode for enhanced cycling stability

Lianfeng Zou et al.

NATURE COMMUNICATIONS (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Degradation Mechanism of Highly Ni-Rich Li[NixCoyMn1-x-y]O2 Cathodes with x > 0.9

Jae-Hyung Kim et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Chemistry, Physical

Ti-Gradient Doping to Stabilize Layered Surface Structure for High Performance High-Ni Oxide Cathode of Li-Ion Battery

Defei Kong et al.

ADVANCED ENERGY MATERIALS (2019)

Add to Collection

Article Electrochemistry

Understanding the role of Mg-doped on core-shell structured layered oxide LiNi0.6Co0.2Mn0.2O2

Ningshuang Zhang et al.

ELECTROCHIMICA ACTA (2019)

Add to Collection

Article Chemistry, Physical

Capacity Fading of Ni-Rich NCA Cathodes: Effect of Microcracking Extent

Gyeong Won Nam et al.

ACS ENERGY LETTERS (2019)

Add to Collection

Article Electrochemistry

Effect of Ti ion doping on electrochemical performance of Ni-rich LiNi0.8Co0.1Mn0.1O2 cathode material

Dengke Zhang et al.

ELECTROCHIMICA ACTA (2019)

Add to Collection

Article Chemistry, Physical

Tungsten doping for stabilization of Li[Ni0.90Co0.05Mn0.05]O2 cathode for Li-ion battery at high voltage

Geon-Tae Park et al.

JOURNAL OF POWER SOURCES (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Stabilizing nickel-rich layered oxide cathodes by magnesium doping for rechargeable lithium-ion batteries

Hang Li et al.

CHEMICAL SCIENCE (2019)

Add to Collection

Article Chemistry, Physical

LiNi0.90Co0.07Mg0.03O2 cathode materials with Mgconcentration gradient for rechargeable lithiumion batteries

Yudong Zhang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Review Chemistry, Physical

Prospect and Reality of Ni-Rich Cathode for Commercialization

Junhyeok Kim et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Capacity Fading of Ni-Rich Li[NixCoyMn1-x-y]O2 (0.6 ≤ x ≤ 0.95) Cathodes for High-Energy-Density Lithium-Ion Batteries: Bulk or Surface Degradation?

Hoon-Hee Ryu et al.

CHEMISTRY OF MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Sufficient Utilization of Zirconium Ions to Improve the Structure and Surface properties of Nickel-Rich Cathode Materials for Lithium-Ion Batteries

Tao He et al.

CHEMSUSCHEM (2018)

Add to Collection

Article Chemistry, Physical

The effect of gradient boracic polyanion-doping on structure, morphology, and cycling performance of Ni-rich LiNi0.8Co0.15Al0.05O2 cathode material

Tao Chen et al.

JOURNAL OF POWER SOURCES (2018)

Add to Collection

Article Chemistry, Physical

Stable layered Ni-rich LiNi0.9Co0.07Al0.03O2 microspheres assembled with nanoparticles as high-performance cathode materials for lithium-ion batteries

Pengfei Zhou et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Advanced Concentration Gradient Cathode Material with Two-Slope for High-Energy and Safe Lithium Batteries

Byung-Beom Lim et al.

ADVANCED FUNCTIONAL MATERIALS (2015)

Add to Collection

Article Chemistry, Physical

Effect of titanium addition as nickel oxide formation inhibitor in nickel-rich cathode material for lithium-ion batteries

Arailym Nurpeissova et al.

JOURNAL OF POWER SOURCES (2015)

Add to Collection

Review Chemistry, Multidisciplinary

Roles of Surface Chemistry on Safety and Electrochemistry in Lithium Ion Batteries

Kyu Tae Lee et al.

ACCOUNTS OF CHEMICAL RESEARCH (2013)

Add to Collection

Article Chemistry, Physical

Improvement of electrochemical properties of layered LiNi1/3Co1/3Mn1/3O2 positive electrode material by zirconium doping

C. X. Ding et al.

SOLID STATE IONICS (2011)

Add to Collection

Article Multidisciplinary Sciences

Building better batteries

M. Armand et al.

NATURE (2008)

Add to Collection

Article Chemistry, Multidisciplinary

Synthesis and characterization of Li[(Ni0.8Co0.1Mn0.1)0.8(Ni0.5Mn0.5)0.2]O2 with the microscale core-shell structure as the positive electrode material for lithium batteries

YK Sun et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2005)

Add to Collection

Article Chemistry, Physical

Structural characterisation of the highly deintercalated LixNi1.02O2 phases (with x <= 0.30)

L Croguennec et al.

JOURNAL OF MATERIALS CHEMISTRY (2001)

Add to Collection

Article Electrochemistry

NiO2 obtained by electrochemical lithium deintercalation from lithium nickelate:: Structural modifications

L Croguennec et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.