☆ 4.4 Article

In-situ preparation of novel nanocomposites of PMMA and ordered mesoporous carbon (FDU-15)

JOURNAL OF POLYMER RESEARCH (2022)

Related references

Note: Only part of the references are listed.

Article Materials Science, Multidisciplinary

Fabrication and characterization of composite PMMA/HA scaffold using freeze casting method

Gurdev Singh et al.

Summary: In this study, various PMMA composite scaffolds were fabricated using the freeze casting process, with PMMA/HA scaffold showing higher compressive strength than cancellous bone. The research indicates that PMMA/HA scaffold has good biological adaptability and can be used for bone implant fabrication in the future.

MATERIALS TECHNOLOGY (2022)

Add to Collection

Article Engineering, Chemical

Removal of AV 90 dye using ordered mesoporous carbon materials prepared via nanocasting of KIT-6: Adsorption isotherms, kinetics and thermodynamic analysis

Dilsad Dolunay Eslek Koyuncu et al.

Summary: By utilizing KIT-6 as a template, CMK-8 type ordered mesoporous carbon materials were synthesized. The optimal conditions for obtaining high uniformity, surface area, pore volume, and wall thickness were determined to be 2 M NaOH concentration and one leaching cycle. Adsorption studies showed that the highest removal efficiency for Acid Violet 90 dye was achieved at pH 2, with a Langmuir isotherm model providing the best fit to the data.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Add to Collection

Review Engineering, Environmental

A review of adsorptive remediation of environmental pollutants from aqueous phase by ordered mesoporous carbon

Daniel Gang et al.

Summary: Ordered mesoporous carbon (OMC), a potential adsorbent, has distinct features such as high BET surface area, large pore size and porosity volume, tunable surface chemistry, and thermo-mechanical stability. Research efforts on OMC include preparation, modification, characterization, and environmental application.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Chemistry, Applied

Using mesoporous carbon to pack polyethylene glycol as a shape-stabilized phase change material with excellent energy storage capacity and thermal conductivity

Daili Feng et al.

Summary: A novel shape-stabilized phase change material was prepared using PEG as PCM and FDU-15 as support. The composite showed superior thermal properties due to the enhanced thermal conductivity and reinforced atomic vibration matching between the skeleton and PCM material. FDU-15 demonstrated better thermal performance compared to other mesopore-based composite PCMs.

MICROPOROUS AND MESOPOROUS MATERIALS (2021)

Add to Collection

Article Engineering, Mechanical

Scratch behavior and mechanical properties of alternating multi-layered PMMA/PC materials

Yang Xu et al.

Summary: In this study, the scratch behavior of multi-layered PMMA/PC materials was investigated through experiments and finite element modeling, revealing interfacial delamination during scratching and dividing the delamination process into three stages dominated by shearing mode crack propagation. Increasing the number of layers resulted in significant enhancement of ductility and toughness in the material.

WEAR (2021)

Add to Collection

Article Biochemistry & Molecular Biology

Hydroxyapatite mineralization of chitosan-tragacanth blend/ZnO/Ag nanocomposite films with enhanced antibacterial activity

Shadpour Mallakpour et al.

Summary: The biocompatible nanocomposites were fabricated using chitosan and tragacanth gum with varying percentages of ZnO and ZnO@Ag nanoparticles. Characterization of the nanocomposites revealed the formation of hydroxyapatite on their surfaces. Evaluation of antibacterial activity showed that nanocomposites containing ZnO@Ag NPs exhibited stronger inhibition zones against Staphylococcus aureus and Escherichia coli compared to those containing ZnO NPs.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2021)

Add to Collection

Article Biochemistry & Molecular Biology

Preparation of polylactic acid/TiO2/GO nano-fibrous films and their preservation effect on green peppers

Xiaorong Dong et al.

Summary: The addition of TiO2 NPs and GO significantly improved the mechanical properties and antibacterial properties of PLA nano-fibrous films. The nano-fibrous films showed enhanced water barrier properties and inhibited the growth of bacteria effectively.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2021)

Add to Collection

Article Environmental Sciences

Low-temperature (NO + O2) adsorption performance of alkaline earth metal-doped C-FDU-15

Runping Wu et al.

Summary: The study demonstrated that alkaline earth metal-doped ordered mesoporous carbon samples significantly influenced the adsorption performance of NO + O-2, with Mg showing the highest adsorption capacity. The species of alkaline earth metals and basic sites were identified as important factors affecting the NO + O-2 adsorption.

JOURNAL OF ENVIRONMENTAL SCIENCES (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Polymer matrix nanocomposites for heavy metal adsorption: a review

Gholamhossein Mohammadnezhad et al.

JOURNAL OF THE IRANIAN CHEMICAL SOCIETY (2020)

Add to Collection

Article Chemistry, Multidisciplinary

In situ synthesis of nanocomposite materials based on modified-mesoporous silica MCM-41 and methyl methacrylate for copper (II) adsorption from aqueous solution

Gholamhossein Mohammadnezhad et al.

JOURNAL OF THE IRANIAN CHEMICAL SOCIETY (2019)

Add to Collection

Article Chemistry, Physical

The Influence of Graphene in Improvement of Physico-Mechanical Properties in PMMA Denture Base Resins

Cecilia Bacali et al.

MATERIALS (2019)

Add to Collection

Article Engineering, Environmental

Facile room-temperature synthesis of a spherical mesoporous covalent organic framework for ultrasensitive solid-phase microextraction of phenols prior to gas chromatography-tandem mass spectrometry

Lu Liu et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Add to Collection

Article Polymer Science

Scratch damage behaviors of PVDF/PMMA multilayered materials: Experiments and finite element modeling

Yang Xu et al.

POLYMER (2019)

Add to Collection

Article Polymer Science

Transparent PC/PMMA Blends Via Reactive Compatibilization in a Twin-Screw Extruder

Tobias Bubmann et al.

POLYMERS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of carbon nano-dots (CNDs) on structural and optical properties of PMMA polymer composite

Shujahadeen B. Aziz et al.

RESULTS IN PHYSICS (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Some basic aspects of polymer nanocomposites: A critical review

Shaoyun Fu et al.

NANO MATERIALS SCIENCE (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Fabrication of PMMA/ZnO nanocomposite: effect of high nanoparticles loading on the optical and thermal properties

Salim Hammani et al.

JOURNAL OF MATERIALS SCIENCE (2018)

Add to Collection

Article Engineering, Environmental

Adsorption of boron by CA@KH-550@EPH@NMDG (CKEN) with biomass carbonaceous aerogels as substrate

Li Sun et al.

JOURNAL OF HAZARDOUS MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Thermal and mechanical properties of novel nanocomposites from modified ordered mesoporous carbon FDU-15 and poly(methyl methacrylate)

Gholamhossein Mohammadnezhad et al.

APPLIED SURFACE SCIENCE (2015)

Add to Collection

Article Chemistry, Physical

Organo-modified mesoporous carbon FDU-15 as new nanofiller for the preparation of nanocomposite materials based on nylon-6

Mohammad Dinari et al.

COLLOID AND POLYMER SCIENCE (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Comprehensive Study of Pore Evolution, Mesostructural Stability, and Simultaneous Surface Functionalization of Ordered Mesoporous Carbon (FDU-15) by Wet Oxidation as a Promising Adsorbent

Zhangxiong Wu et al.

LANGMUIR (2010)

Add to Collection

Article Materials Science, Multidisciplinary

Surface modification of multi-walled carbon nanotubes using 3-aminopropyltriethoxysilane

John Kathi et al.

JOURNAL OF MATERIALS SCIENCE (2008)

Add to Collection

Article Chemistry, Physical

An aqueous cooperative assembly route to synthesize ordered mesoporous carbons with controlled structures and morphology

Fuqiang Zhang et al.

CHEMISTRY OF MATERIALS (2006)

Add to Collection

Article Chemistry, Multidisciplinary

Ordered mesoporous polymers and homologous carbon frameworks: Amphiphilic surfactant templating and direct transformation

Y Meng et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2005)

Add to Collection

© Peeref 2019-2024. All rights reserved.