☆ 4.6 Article

Unraveling the Formation Mechanism of the 2D/3D Perovskite Heterostructure for Perovskite Solar Cells Using Multi-Method Characterization

JOURNAL OF PHYSICAL CHEMISTRY C (2022)

Related references

Note: Only part of the references are listed.

Article Energy & Fuels

Solar cell efficiency tables (version 59)

Martin A. Green et al.

Summary: This article presents consolidated tables showing the highest independently confirmed efficiencies for solar cells and modules, with guidelines outlined for inclusion of results into these tables and a review of new entries since June 2021.

PROGRESS IN PHOTOVOLTAICS (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Origin of Efficiency and Stability Enhancement in High-Performing Mixed Dimensional 2D-3D Perovskite Solar Cells: A Review

Md Arafat Mahmud et al.

Summary: The mixed-dimensional 2D-3D perovskite solar cells, incorporating long carbon-chain organic spacer cations, have shown promising results in terms of enhancing both device efficiency and stability. By carefully balancing the composition of 2D and 3D perovskite, researchers aim to take advantage of the specific properties of each material phase for further improvement.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Quasi-Two-Dimensional Perovskite Solar Cells with Efficiency Exceeding 22%

Yalan Zhang et al.

Summary: In this study, a quasi-2D perovskite solar cell with a power conversion efficiency of over 22% was achieved by post-treatment with amphoteric imidazolium iodide. The optimal concentration of imidazolium iodide reduced trap density and enhanced charge mobility, resulting in improved phase purity and crystallinity of the device.

ACS ENERGY LETTERS (2022)

Add to Collection

Review Nanoscience & Nanotechnology

Two-dimensional perovskites for photovoltaics

W. Fu et al.

Summary: This review discusses the key issues affecting the performance of 2D perovskites, highlighting the challenges and opportunities for 2D perovskite solar cells.

MATERIALS TODAY NANO (2021)

Add to Collection

Article Chemistry, Physical

Tuning the Interfacial Dipole Moment of Spacer Cations for Charge Extraction in Efficient and Ultrastable Perovskite Solar Cells

Yuankun Qiu et al.

Summary: The design of the spacer cation in 2D perovskites plays a crucial role in defect passivation and carrier extraction. By manipulating the number of fluorine atoms on the para-position of the benzene ring, the dipole moment of 2D cations can be finely tuned, affecting the interfacial dipole at the 2D/3D heterojunction interface. A highly dipolar 2D perovskite layer at the interface between the 3D perovskite and hole-transporting material enhances charge transport and minimizes charge trapping, leading to high efficiency and stability in solar cells.

JOURNAL OF PHYSICAL CHEMISTRY C (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Modifying Surface Termination of CsPbI3 Grain Boundaries by 2D Perovskite Layer for Efficient and Stable Photovoltaics

Tiantian Liu et al.

Summary: In order to improve the performance of all-inorganic perovskite solar cells, an ultra-thin 2D perovskite is used to terminate CsPbI3 grain boundaries, enhancing charge-carrier extraction and transport while effectively suppressing nonradiative recombination.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Multidisciplinary Sciences

Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes

Hanul Min et al.

Summary: By introducing an interlayer between the electron-transporting and perovskite layers in perovskite solar cells, researchers have successfully enhanced charge extraction and transport from the perovskite, leading to higher power conversion efficiency and fewer interfacial defects. The coherent interlayer allowed the fabrication of devices with a certified efficiency of 25.5%, which maintained about 90% of its initial efficiency even after continuous light exposure for 500 hours. The findings provide guidelines for designing defect-minimizing interfaces in metal halide perovskites and electron-transporting layers.

NATURE (2021)

Add to Collection

Article Chemistry, Physical

A review on two-dimensional (2D) and 2D-3D multidimensional perovskite solar cells: Perovskites structures, stability, and photovoltaic performances

Eun-Bi Kim et al.

JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY C-PHOTOCHEMISTRY REVIEWS (2021)

Add to Collection

Article Multidisciplinary Sciences

23.7% Efficient inverted perovskite solar cells by dual interfacial modification

Matteo Degani et al.

Summary: This study presents a dual interfacial modification approach by incorporating large organic cations at both the bottom and top interfaces of the perovskite active layer, leading to simultaneous improvement in both open-circuit voltage and fill factor of the devices, reaching a champion device efficiency of 23.7%. This dual interfacial modification is fully compatible with bulk modification of the perovskite active layer by ionic liquids, resulting in efficient and stable inverted architecture devices.

SCIENCE ADVANCES (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Surface Reconstruction of Halide Perovskites During Post-treatment

Shaun Tan et al.

Summary: In recent years, postfabrication surface treatment strategies have played a crucial role in improving the stability and performance of halide perovskite photovoltaics. This study utilized complementary surface-sensitive and depth-resolved techniques to observe the reconstruction of the perovskite surface induced by the common solvent isopropyl alcohol. The findings suggest that isopropyl alcohol assists in the adsorption process of organic ammonium salts to the surface, enhancing their defect passivation effects.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2021)

Add to Collection

Article Multidisciplinary Sciences

Pseudo-halide anion engineering for α-FAPbI3 perovskite solar cells

Jaeki Jeong et al.

Summary: The research introduces a new concept of using formate anion to suppress defects in metal halide perovskite films and enhance film crystallinity, leading to improved efficiency and stability of solar cells.

NATURE (2021)

Add to Collection

Review Energy & Fuels

Review on persistent challenges of perovskite solar cells? stability

Maithili K. Rao et al.

Summary: Perovskite solar cells have achieved high efficiency, surpassing other types of solar cells like Dye-Sensitized Solar cells. Despite technological advancements, commercialization remains a significant challenge. Stability and environmental challenges are key issues to be addressed in the field.

SOLAR ENERGY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Benzylammonium-Mediated Formamidinium Lead Iodide Perovskite Phase Stabilization for Photovoltaics

Anwar Q. Alanazi et al.

Summary: This research focuses on the use of benzylammonium iodide to achieve a stable formamidinium lead iodide perovskite phase, with the microscopic structure elucidated using solid-state NMR spectroscopy and X-ray scattering measurements. Perovskite solar cells based on the FAPbI(3)(BzI)(0.25) composition achieve power conversion efficiencies exceeding 20%, with enhanced shelf-life and operational stability maintained after one year at ambient conditions, retaining 80% of the performance.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Bi-functional interfaces by poly(ionic liquid) treatment in efficient pin and nip perovskite solar cells

Pietro Caprioglio et al.

Summary: The study highlights the use of poly(ionic liquid) (PIL) to introduce a multi-functional interlayer in perovskite solar cells, leading to significant improvements in efficiency and stability across different perovskite compositions and architectures. By passivating surface traps and enhancing charge extraction, the PIL-treated devices achieved outstanding V-OC and FF values, with the best devices reaching conversion efficiencies up to 21.4%. Moreover, the PIL treatment also enhanced stability during power tracking and maintained efficiencies after long-term storage, showcasing the versatility and effectiveness of this methodology.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Double-Sided Surface Passivation of 3D Perovskite Film for High-Efficiency Mixed-Dimensional Perovskite Solar Cells

Md Arafat Mahmud et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Multidisciplinary Sciences

Efficient, stable silicon tandem cells enabled by anion-engineered wide-bandgap perovskites

Daehan Kim et al.

SCIENCE (2020)

Add to Collection

Article Chemistry, Multidisciplinary

In Situ Analysis Reveals the Role of 2D Perovskite in Preventing Thermal-Induced Degradation in 2D/3D Perovskite Interfaces

Albertus A. Sutanto et al.

NANO LETTERS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Light-Induced Passivation in Triple Cation Mixed Halide Perovskites: Interplay between Transport Properties and Surface Chemistry

Stefania Cacovich et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Energy & Fuels

Bottom-up passivation effects by using 3D/2D mix structure for high performance p-i-n perovskite solar cells

Jiawen Li et al.

SOLAR ENERGY (2020)

Add to Collection

Review Chemistry, Physical

Interface Engineering Driven Stabilization of Halide Perovskites against Moisture, Heat, and Light for Optoelectronic Applications

Aditya Narayan Singh et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Review Chemistry, Physical

Recent progress of two-dimensional lead halide perovskite single crystals: Crystal growth, physical properties, and device applications

Jiayu Di et al.

ECOMAT (2020)

Add to Collection

Article Chemistry, Physical

Dynamical evolution of the 2D/3D interface: a hidden driver behind perovskite solar cell instability

Albertus A. Sutanto et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Article Chemistry, Physical

High-Performance Perovskite Solar Cells with Enhanced Environmental Stability Based on a (p-FC6H4C2H4NH3)2[PbI4] Capping Layer

Qin Zhou et al.

ADVANCED ENERGY MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Record Open-Circuit Voltage Wide-Bandgap Perovskite Solar Cells Utilizing 2D/3D Perovskite Heterostructure

Saba Gharibzadeh et al.

ADVANCED ENERGY MATERIALS (2019)

Add to Collection

Article Multidisciplinary Sciences

Ultrahydrophobic 3D/2D fluoroarene bilayer-based water-resistant perovskite solar cells with efficiencies exceeding 22%

Yuhang Liu et al.

SCIENCE ADVANCES (2019)

Add to Collection

Article Chemistry, Physical

Exciton-Exciton Annihilation in Two-Dimensional Halide Perovskites at Room Temperature

Geraud Delport et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2019)

Add to Collection

Article Chemistry, Physical

Crystal Orientation Drives the Interface Physics at Two/Three-Dimensional Hybrid Perovskites

Marine E. F. Bouduban et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2019)

Add to Collection

Review Chemistry, Multidisciplinary

Two-Dimensional Hybrid Halide Perovskites: Principles and Promises

Lingling Mao et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)

Add to Collection

Review Chemistry, Multidisciplinary

A Review of Perovskites Solar Cell Stability

Rui Wang et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Structure and chemical stability in perovskitepolymer hybrid photovoltaic materials

Daniel J. Fairfield et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Article Chemistry, Physical

Surface & grain boundary co-passivation by fluorocarbon based bifunctional molecules for perovskite solar cells with efficiency over 21%

Pengfei Guo et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Article Chemistry, Multidisciplinary

An interface stabilized perovskite solar cell with high stabilized efficiency and low voltage loss

Jason J. Yoo et al.

ENERGY & ENVIRONMENTAL SCIENCE (2019)

Add to Collection

Article Energy & Fuels

In Situ 2D Perovskite Formation and the Impact of the 2D/3D Structures on Performance and Stability of Perovskite Solar Cells

Matheus S. de Holanda et al.

SOLAR RRL (2019)

Add to Collection

Review Chemistry, Multidisciplinary

Perovskite/Silicon Tandem Solar Cells: Marriage of Convenience or True Love Story? - An Overview

Jeremie Werner et al.

ADVANCED MATERIALS INTERFACES (2018)

Add to Collection

Article Chemistry, Multidisciplinary

In situ identification of cation-exchange-induced reversible transformations of 3D and 2D perovskites

Weixin Huang et al.

CHEMICAL COMMUNICATIONS (2018)

Add to Collection

Article Multidisciplinary Sciences

Scaling law for excitons in 2D perovskite quantum wells

J. -C. Blancon et al.

NATURE COMMUNICATIONS (2018)

Add to Collection

Review Chemistry, Physical

Recent progress in 2D/quasi-2D layered metal halide perovskites for solar cells

Jielin Yan et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

Add to Collection

Review Materials Science, Multidisciplinary

The architecture of the electron transport layer for a perovskite solar cell

Mohamad Firdaus Mohamad Noh et al.

JOURNAL OF MATERIALS CHEMISTRY C (2018)

Add to Collection

Review Chemistry, Multidisciplinary

2D Ruddlesden-Popper Perovskites for Optoelectronics

Yani Chen et al.

ADVANCED MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

A novel quadruple-cation absorber for universal hysteresis elimination for high efficiency and stable perovskite solar cells

Tongle Bu et al.

ENERGY & ENVIRONMENTAL SCIENCE (2017)

Add to Collection

Article Multidisciplinary Sciences

Perovskite solar cells with CuSCN hole extraction layers yield stabilized efficiencies greater than 20%

Neha Arora et al.

SCIENCE (2017)

Add to Collection

Article Multidisciplinary Sciences

One-Year stable perovskite solar cells by 2D/3D interface engineering

G. Grancini et al.

NATURE COMMUNICATIONS (2017)

Add to Collection

Review Chemistry, Multidisciplinary

Hybrid Perovskites for Photovoltaics: Charge-Carrier Recombination, Diffusion, and Radiative Efficiencies

Michael B. Johnston et al.

ACCOUNTS OF CHEMICAL RESEARCH (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Hybrid Perovskite/Perovskite Heterojunction Solar Cells

Yinghong Hu et al.

ACS NANO (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Exploration of the compositional space for mixed lead halogen perovskites for high efficiency solar cells

T. Jesper Jacobsson et al.

ENERGY & ENVIRONMENTAL SCIENCE (2016)

Add to Collection

Article Chemistry, Physical

How Lead Halide Complex Chemistry Dictates the Composition of Mixed Halide Perovskites

Seog Joon Yoon et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2016)

Add to Collection

Article Chemistry, Physical

Formamidinium Lead Halide Perovskite Crystals with Unprecedented Long Carrier Dynamics and Diffusion Length

Ayan A. Zhumekenov et al.

ACS ENERGY LETTERS (2016)

Add to Collection

Editorial Material Energy & Fuels

Selecting tandem partners for silicon solar cells

Zhengshan (Jason) Yu et al.

NATURE ENERGY (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Nanocrystals of Cesium Lead Halide Perovskites (CsPbX3, X = Cl, Br, and I): Novel Optoelectronic Materials Showing Bright Emission with Wide Color Gamut

Loredana Protesescu et al.

NANO LETTERS (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Excitons in ultrathin organic-inorganic perovskite crystals

Omer Yaffe et al.

PHYSICAL REVIEW B (2015)

Add to Collection

Review Chemistry, Multidisciplinary

Advancements in perovskite solar cells: photophysics behind the photovoltaics

Tze Chien Sum et al.

ENERGY & ENVIRONMENTAL SCIENCE (2014)

Add to Collection

Article Chemistry, Physical

Room-Temperature Optical Tunability and Inhomogeneous Broadening in 2D-Layered Organic-Inorganic Perovskite Pseudobinary Alloys

Gaetan Lanty et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2014)

Add to Collection

Article Physics, Applied

Synthesis, optical properties and photostability of novel fluorinated organic-inorganic hybrid (R-NH3)2PbX4 semiconductors

Y. Wei et al.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2013)

Add to Collection

Article Multidisciplinary Sciences

Mechanism of carrier accumulation in perovskite thin-absorber solar cells

Hui-Seon Kim et al.

NATURE COMMUNICATIONS (2013)

Add to Collection

Article Multidisciplinary Sciences

Lead Iodide Perovskite Sensitized All-Solid-State Submicron Thin Film Mesoscopic Solar Cell with Efficiency Exceeding 9%

Hui-Seon Kim et al.

SCIENTIFIC REPORTS (2012)

Add to Collection

Article Chemistry, Multidisciplinary

Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells

Akihiro Kojima et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2009)

Add to Collection

© Peeref 2019-2024. All rights reserved.