4.6 Article

Multifunctional and stretchable graphene/textile composite sensor for human motion monitoring

Related references

Note: Only part of the references are listed.
Article Polymer Science

Graphene dispersed by pyrene-terminated polyethylene glycol for reinforced epoxy composites

Yaochen Zheng et al.

Summary: Incorporating graphene into epoxy composites is an effective way to enhance their mechanical properties. However, achieving uniform dispersion of graphene within the epoxy matrix remains a challenge. By using a specific dispersant, graphene can be effectively dispersed. Increasing the graphene loading can greatly improve the mechanical properties of the composites.

JOURNAL OF APPLIED POLYMER SCIENCE (2022)

Article Polymer Science

Elastic interface in few-layer graphene/poly(vinylidenefluoride-trifluoroethylene-chlorofluoroethylene) nanocomposite with improved polarization

Huijian Ye et al.

Summary: A polymer film capacitor with high energy density and charge-discharge efficiency was developed using a compatible elastic interface composed of hyperbranched copolymer in graphene/polymer nanocomposite. The energy density was improved by enhancing the interfacial polarization and decreasing the accumulation of charge carriers under high electric field.

JOURNAL OF APPLIED POLYMER SCIENCE (2022)

Article Materials Science, Multidisciplinary

Highly Durable and Stretchable Ti3C2Tx/PPy-Fabric-Based Strain Sensor for Human-Motion Detection

Kun Yang et al.

Summary: The nylon strain sensor fabricated using Ti3C2Tx/PPy materials demonstrates excellent performance in monitoring human activities such as joint bending and subtle motions, indicating its potential for health-care monitoring applications.

ADVANCED MATERIALS TECHNOLOGIES (2022)

Article Engineering, Environmental

Multifunctional MXene/CNTs based flexible electronic textile with excellent strain sensing, electromagnetic interference shielding and Joule heating performances

Dianbo Zhang et al.

Summary: This study develops a high-performance electronic textile with outstanding strain sensing, electromagnetic interference (EMI) shielding, and thermal management performances. The textile is based on a conductive coating of MXene and carbon nanotubes on a thermoplastic polyurethane non-woven fabric. The resulting textile exhibits high sensitivity, wide sensing range, rapid response/recovery time, excellent stability and reliability, as well as superior EMI shielding effectiveness and thermal management performance.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Materials Science, Composites

Flexible, mechanically robust, multifunctional and sustainable cellulose/graphene nanocomposite films for wearable human-motion monitoring

Sensen Han et al.

Summary: The development of sensing technology for flexible electronics has been applied in intelligent robots, human-machine interfaces, and health monitoring. However, it is challenging to create a sensor that is ultra-lightweight, highly durable, flexible, rapidly responsive, and easy to fabricate. This study introduces a cost-effective and sustainable method for creating such a sensor by self-assembling cellulose nanofibers and modified graphene nanoplatelets, and then filtering the mixture.

COMPOSITES SCIENCE AND TECHNOLOGY (2022)

Article Polymer Science

The effect of graphene flake size on the properties of graphene-based polymer composite films

Ali Tarhini et al.

Summary: This study investigates the impact of graphene flake size on the properties of PVDF-HFP composites, demonstrating that larger graphene flakes result in higher electrical and thermal conductivity, as well as tensile strength. The composite films with larger graphene flakes achieved ultra-high in-plane electrical conductivity, in-plane thermal conductivity, and tensile strength. These values are reported to be the highest among PVDF-based composites in the literature.

JOURNAL OF APPLIED POLYMER SCIENCE (2021)

Review Polymer Science

Review of Graphene-Based Textile Strain Sensors, with Emphasis on Structure Activity Relationship

Rufang Yu et al.

Summary: Graphene-based textile strain sensors can be prepared through conductive textiles spinning and weaving techniques or depositing graphene-based materials on the surface of textiles. The gauge factor (GF) value of sensor is a key evaluation indicator, with trends in recoverable and unrecoverable deformation stages. The main challenge lies in limited studies on application capacity, with focus on washability and lack of consideration for other environmental factors.

POLYMERS (2021)

Review Multidisciplinary Sciences

Wearable triboelectric sensors for biomedical monitoring and human-machine interface

Xianjie Pu et al.

Summary: The growing advocacy of healthy and quality life has led to the emergence of wearable electronics. The triboelectric sensor (TS) has become a key technology in this field, capable of monitoring vital signs and movements of the human body. Advancements in biomedical monitoring over the past 5 years have focused on pulse, respiration, and pressure monitoring, with potential for novel human-machine interfaces (HMIs). Future trends in biomedical monitoring and HMIs based on TSs will continue to be explored.

ISCIENCE (2021)

Review Chemistry, Physical

Textile-Based Mechanical Sensors: A Review

Zaiwei Zhou et al.

Summary: Textiles-based sensors have attracted great interest for their flexibility, comfort, low cost, and wearability, collecting mechanical, physical, and chemical stimuli from the human body to monitor health and exercise. This review focuses on textile-based mechanical sensors (TMSs), highlighting their advantages, performance optimization strategies, and potential applications in health monitoring, motion recognition, and human-machine interaction. Challenges and prospects are also discussed to guide future research in promoting the development of the Internet of Things.

MATERIALS (2021)

Article Polymer Science

The composite hydrogel with 2D flexible crosslinking point of reduced graphene oxide for strain sensor

Xu Xiang et al.

Summary: In this research, a PAM-rGO composite hydrogel was developed, which showed improved toughness and mechanical strength. A better linear relationship between resistance and length was established, demonstrating great potential for applications in the field of bionic skin.

JOURNAL OF APPLIED POLYMER SCIENCE (2021)

Article Multidisciplinary Sciences

Ultrasensitive strain sensor based on superhydrophobic microcracked conductive Ti3C2Tx MXene/paper for human-motion monitoring and E-skin

Yibing Bu et al.

Summary: This study presents a paper-based superhydrophobic microcracked conductive strain sensor with high sensitivity, ultra-low detection limit, and good fatigue resistance. It can effectively monitor human motions even underwater, showing great potential in practical applications.

SCIENCE BULLETIN (2021)

Article Engineering, Environmental

Conductive MXene/cotton fabric based pressure sensor with both high sensitivity and wide sensing range for human motion detection and E-skin

Yanjun Zheng et al.

Summary: The flexible wearable pressure sensor based on MXene/cotton fabric exhibits high sensitivity, broad sensing range, rapid response/recovery time, excellent stability, and long-term durability. It can detect and distinguish various human health signals, and can be used in next generation wearable electronics for recognizing different tactile stimuli.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Energy & Fuels

A Wearable Sensor Based on Gold Nanowires/Textile and Its Integrated Smart Glove for Motion Monitoring and Gesture Expression

Zhiqi Zhao et al.

Summary: The article introduces a sensitive flexible piezoresistive pressure sensor with gold nanowires combined with textile, showing high sensitivity and durability in monitoring various human motions and recognizing gestures.

ENERGY TECHNOLOGY (2021)

Article Chemistry, Analytical

Textile Electrocardiogram (ECG) Electrodes for Wearable Health Monitoring

Katya Arquilla et al.

SENSORS (2020)

Article Chemistry, Multidisciplinary

MXene-Based Fibers, Yarns, and Fabrics for Wearable Energy Storage Devices

Ariana Levitt et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Review Materials Science, Paper & Wood

Textile sensors for wearable applications: a comprehensive review

G. M. Nazmul Islam et al.

CELLULOSE (2020)

Review Materials Science, Multidisciplinary

Reviews of wearable healthcare systems: Materials, devices and system integration

Zheng Lou et al.

MATERIALS SCIENCE & ENGINEERING R-REPORTS (2020)

Article Nanoscience & Nanotechnology

Multifunctional, durable and highly conductive graphene/sponge nanocomposites

Qingshi Meng et al.

NANOTECHNOLOGY (2020)

Article Materials Science, Composites

Epoxy/graphene film for lifecycle self-sensing and multifunctional applications

Sensen Han et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2020)

Article Materials Science, Multidisciplinary

Stretchable Textile Rechargeable Zn Batteries Enabled by a Wax Dyeing Method

Zi Hao Guo et al.

ADVANCED MATERIALS TECHNOLOGIES (2020)

Article Chemistry, Multidisciplinary

Ultraelastic Yarns from Curcumin-Assisted ELD toward Wearable Human-Machine Interface Textiles

Chuang Zhu et al.

ADVANCED SCIENCE (2020)

Review Electrochemistry

Review-Textile Based Chemical and Physical Sensors for Healthcare Monitoring

Amir Hatamie et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)

Article Polymer Science

A novel, stretchable, silver-coated polyolefin elastomer nanofiber membrane for strain sensor applications

Kangqi Chang et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2019)

Article Materials Science, Multidisciplinary

Stretchable and Designable Textile Pattern Strain Sensors Based on Graphene Decorated Conductive Nylon Filaments

Mingwei Tian et al.

MACROMOLECULAR MATERIALS AND ENGINEERING (2019)

Article Chemistry, Analytical

Impact of Fabric Properties on Textile Pressure Sensors Performance

Luca Possanzini et al.

SENSORS (2019)

Article Engineering, Electrical & Electronic

Highly stretchable and wearable strain sensors using conductive wool yarns with controllable sensitivity

Hamid Souri et al.

SENSORS AND ACTUATORS A-PHYSICAL (2019)

Article Nanoscience & Nanotechnology

Highly Stretchable Multifunctional Wearable Devices Based on Conductive Cotton and Wool Fabrics

Hamid Souri et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Article Materials Science, Multidisciplinary

Preparation of fabric strain sensor based on graphene for human motion monitoring

Hanna Lee et al.

JOURNAL OF MATERIALS SCIENCE (2018)

Article Materials Science, Multidisciplinary

Wearable strain sensors based on electrically conductive natural fiber yarns

Hamid Souri et al.

MATERIALS & DESIGN (2018)

Article Instruments & Instrumentation

Wearable carbon nanotube-based fabric sensors for monitoring human physiological performance

Long Wang et al.

SMART MATERIALS AND STRUCTURES (2017)

Article Chemistry, Multidisciplinary

A highly sensitive graphene woven fabric strain sensor for wearable wireless musical instruments

Xu Liu et al.

MATERIALS HORIZONS (2017)

Article Chemistry, Multidisciplinary

Scalable Production of Graphene-Based Wearable E-Textiles

Nazmul Karim et al.

ACS NANO (2017)

Article Engineering, Environmental

Flexible and wearable strain sensing fabrics

Guangming Cai et al.

CHEMICAL ENGINEERING JOURNAL (2017)

Article Chemistry, Multidisciplinary

Graphene-Enabled Electrodes for Electrocardiogram Monitoring

Numan Celik et al.

NANOMATERIALS (2016)

Article Nanoscience & Nanotechnology

Highly Stretchable and Wearable Graphene Strain Sensors with Controllable Sensitivity for Human Motion Monitoring

Jung Jin Park et al.

ACS APPLIED MATERIALS & INTERFACES (2015)

Article Nanoscience & Nanotechnology

Knitted Strain Sensor Textiles of Highly Conductive All-Polymeric Fibers

Shayan Seyedin et al.

ACS APPLIED MATERIALS & INTERFACES (2015)

Review Chemistry, Multidisciplinary

Structural Defects in Graphene

Florian Banhart et al.

ACS NANO (2011)

Article Polymer Science

Graphene-based polymer nanocomposites

Jeffrey R. Potts et al.

POLYMER (2011)