☆ 4.6 Article

Improving mechanical properties and processability of a very high Tg epoxy amine network via anti-plasticizer fortification

JOURNAL OF APPLIED POLYMER SCIENCE (2022)

Related references

Note: Only part of the references are listed.

Article Polymer Science

Aromatic tetra-glycidyl ether versus tetra-glycidyl amine epoxy networks: Influence of monomer structure and epoxide conversion

Samuel R. Swan et al.

Summary: This study investigates the differences between glycidyl ether and glycidyl amine crosslinked networks and compares the structure/property relationships of these networks in depth. The results show that despite some reduced mechanical and thermal properties, the NNE epoxy resin system is a very thermally stable high temperature epoxy resin suitable for a wide range of new applications.

POLYMER (2022)

Add to Collection

Article Materials Science, Composites

MWCNT grafted with POSS-based novel flame retardant-filled epoxy resin nanocomposite: fabrication, mechanical properties, and flammability

Van-Huy Nguyen et al.

Summary: By using MWCNT-L-POSS as an additive for epoxy resin cured at room temperature, the flexural strength of the fabricated composite can be significantly increased and the flame retardancy improved.

COMPOSITE INTERFACES (2021)

Add to Collection

Article Materials Science, Characterization & Testing

The role of β relaxations in determining the compressive properties of an epoxy amine network modified with POSS and mono-functional epoxy resins

Larry Q. Reyes et al.

Summary: This study investigates the glassy state molecular mobility of modified epoxy amine networks using sub-ambient 1 relaxations and its relationship to compressive properties. Two types of additives, bulky inorganic siloxane caged epoxy functional polysilsesquioxanes (POSS) and mono-functional epoxy diluents, were used to modify the networks. Despite structural variations, the glassy state molecular mobility correlates strongly with changes in modulus and yield strain.

POLYMER TESTING (2021)

Add to Collection

Article Engineering, Chemical

A comparative study on the rheological, thermal, and mechanical performance of epoxy resin modified with thermoplastics

Hongfeng Li et al.

Summary: Thermoplastic and functional polymers were used to modify epoxy resin in this study to investigate their influence on the properties of the resin. It was found that BMG had excellent toughening effect on the EP resin compared to PPO and PSF, with EP/BMG blend showing good processing performance and mechanical properties. The influence of polymers on the properties of EP resin was attributed to their molecular structures.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Study of the acoustic emission response to a core-shell rubber-toughened, high-temperature composite

Samuel R. Swan et al.

Summary: Adding core-shell rubber in highly cross-linked networks can improve thermal properties while reducing flexural properties, but enhancing fracture toughness and interlaminar fracture energy release rate.

JOURNAL OF MATERIALS SCIENCE (2021)

Add to Collection

Article Polymer Science

Highly ductile glassy epoxy systems obtained by network topology modification using partially reacted substructures

J. Gao et al.

Summary: A strategy of toughening epoxy thermosets through topological rearrangement of cross-linked networks and adding partially reacted substructures can enhance the strain at failure of the system. However, the addition of substructures also decreases the glass transition temperature of the system, with protovoid formation playing a dominant role in enhancing ductility.

POLYMER (2021)

Add to Collection

Article Polymer Science

Temperature dependent fracture behavior in model epoxy networks with nanoscale heterogeneity

Matthew D. Eaton et al.

Summary: The study investigated the effect of nanoscale heterogeneity on the mode I fracture toughness of model epoxy networks, with results showing that high toughness is achieved in heterogeneous networks.

POLYMER (2021)

Add to Collection

Article Chemistry, Physical

Ductile high-Tg epoxy systems via incorporation of partially reacted substructures

M. Sharifi et al.

Summary: A method is demonstrated to obtain high T-g plastically deformable crosslinked polymer systems by manipulating the network topology of epoxy systems cured with amines. Adding mPRS with elevated degrees of polymerization can significantly improve the elongation-to-failure of the modified epoxy systems.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection

Article Polymer Science

The role of β relaxations in controlling compressive properties in hyperbranched polymer-modified epoxy networks

Larry Q. Reyes et al.

Summary: The study investigates the effects of incorporating a largely miscible second-generation aliphatic polyester hyperbranched polymer (HBP) as a modifier in a cured epoxy amine network on molecular mobility and compressive properties in the glassy state. The beta relaxation, determined by dynamic mechanical analysis, is used to measure short-range motion and is found to strongly correlate with changes in compressive modulus, yield stress, and strain. Parameters such as HBP concentration and interactions with the epoxy matrix play a significant role in these correlations.

POLYMER JOURNAL (2021)

Add to Collection

Article Polymer Science

Phase morphology and mechanical properties of polyetherimide modified epoxy resins: A comparative study

Hong Ma et al.

POLYMER (2019)

Add to Collection

Article Polymer Science

Internal antiplasticisation in highly crosslinked amine cured multifunctional epoxy resins

Roderick Ramsdale-Capper et al.

POLYMER (2018)

Add to Collection

Article Polymer Science

Synthesis, characterization, and shape-memory performances of monoamine-toughened epoxy resin

Xiang-Hai Jing et al.

HIGH PERFORMANCE POLYMERS (2016)

Add to Collection

Article Polymer Science

Phenylene Ring Motions in Isomeric Glassy Epoxy Networks and Their Contributions to Thermal and Mechanical Properties

Jianwei Tu et al.

MACROMOLECULES (2015)

Add to Collection

Article Materials Science, Composites

Out-time effects on cure kinetics and viscosity for an out-of-autoclave (OOA) prepreg: Modelling and monitoring

D. Kim et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2014)

Add to Collection

Article Polymer Science

Characterization and modeling of diglycidyl ether of bisphenol-a epoxy cured with aliphatic liquid amines

Nicola T. Guest et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2013)

Add to Collection

Article Polymer Science

Structure and properties of amine-hardened epoxy/benzoxazine hybrids: Effect of epoxy resin functionality

S. Grishchuk et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2012)

Add to Collection

Article Polymer Science

Investigation of pre-reaction and cure temperature on multiscale dispersion in POSS-epoxy nanocomposites

Katherine L. Frank et al.

POLYMER (2012)

Add to Collection

Article Polymer Science

Multi-functional Epoxy Resins Performing High Thermal Resistance with Good Flow-ability based on Dimeric Naphthols

Ichiro Ogura et al.

HIGH PERFORMANCE POLYMERS (2010)

Add to Collection

Article Polymer Science

The Effects of Monoepoxide Chain Termination and Their Derived Soluble Fractions on the Structure-Property Relationships of Controlled Epoxy Networks

Maurice J. Marks et al.

JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2009)

Add to Collection

Article Chemistry, Physical

Anomalous ductility in thermoset/thermoplastic polymer alloys

Debashish Mukherji et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2009)

Add to Collection

Article Engineering, Manufacturing

Novel core-shell (dendrimer) epoxy tougheners: Processing and hot-wet performance

Felix N. Nguyen et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2008)

Add to Collection

Article Physics, Fluids & Plasmas

Microvoid formation and strain hardening in highly cross-linked polymer networks

Debashish Mukherji et al.

PHYSICAL REVIEW E (2008)

Add to Collection

Article Polymer Science

A model for the prediction of structure-property relations in cross-linked polymers

Joel P. Foreman et al.

POLYMER (2008)

Add to Collection

Article Polymer Science

Chemico-diffusion kinetics and TTT cure diagrams of DGEBA-DGEBF/amine resins cured with phenol catalysts

F. X. Perrin et al.

EUROPEAN POLYMER JOURNAL (2007)

Add to Collection

Article Polymer Science

Modeling the cure of an epoxy-amine resin with bisphenol a as an external catalyst

Francois-Xavier Perrin et al.

MACROMOLECULAR CHEMISTRY AND PHYSICS (2007)

Add to Collection

Article Polymer Science

Study on curing kinetics and curing mechanism of epoxy resin based on diglycidyl ether of bisphenol A and melamine phosphate

WY Chen et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2004)

Add to Collection

Article Polymer Science

Quantitative structure-property relationships for composites: prediction of glass transition temperatures for epoxy resins

HP Liu et al.

POLYMER (2004)

Add to Collection

Article Polymer Science

Toughening of an epoxy anhydride resin system using an epoxidized hyperbranched polymer

RJ Varley et al.

POLYMER INTERNATIONAL (2004)

Add to Collection

Article Engineering, Chemical

Fracture behavior of core-shell rubber-modified clay-epoxy nanocomposites

KT Gam et al.

POLYMER ENGINEERING AND SCIENCE (2003)

Add to Collection

Article Engineering, Chemical

Layered silicate nanocomposites based on various high-functionality epoxy resins: The influence of an organoclay on resin cure

O Becker et al.

POLYMER ENGINEERING AND SCIENCE (2003)

Add to Collection

Article Polymer Science

Mechanical properties of intercalated cyanate ester-layered silicate nanocomposites

S Ganguli et al.

POLYMER (2003)

Add to Collection

Article Polymer Science

Morphology, thermal relaxations and mechanical properties of layered silicate nanocomposites based upon high-functionality epoxy resins

O Becker et al.

POLYMER (2002)

Add to Collection

Article Materials Science, Composites

Improvement of the performance of epoxy-amine thermosets by antiplasticizer-induced nano-scale phase separation during cure

V Sauvant et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2002)

Add to Collection

Article Polymer Science

The curing process and moisture transport in a tetrafunctional epoxy resin as investigated by FT-NIR spectroscopy

P Musto et al.

HIGH PERFORMANCE POLYMERS (2000)

Add to Collection

Article Polymer Science

Structure-property relationships in epoxy-amine networks of well-controlled architecture

JL Halary

HIGH PERFORMANCE POLYMERS (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.