4.7 Article

Preparation of cross-linked porous SnO2 nanosheets using three-dimensional reduced graphene oxide as a template and their gas sensing property

Related references

Note: Only part of the references are listed.
Article Chemistry, Physical

MOF-based nanoscale Pt catalyst decorated SnO2 porous nanofibers for acetone gas detection

Long Chen et al.

Summary: The gas sensors fabricated with Pt-ZnO-SnO2 porous NFs showed ultrahigh response, high selectivity, and low detection limit to acetone during dynamic measurements. The performance was attributed to the multi-heterojunctions construction, increase of oxygen vacancies, and the electronic and chemical sensitization of Pt NPs.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Article Chemistry, Physical

TiO2 nanostructures with different crystal phases for sensitive acetone gas sensors

Shuang Cao et al.

Summary: Adjusting the crystal phase structure of sensing materials can optimize the gas sensing characteristics. Rutile phase TiO2 nanorods exhibit excellent sensing properties due to narrow band gap and more oxygen vacancies, showing a possible way for designing gas sensors with remarkable performances.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

Article Chemistry, Physical

A novel CeO2 Hollow-Shell sensor constructed for high sensitivity of acetone gas detection

Lin Lyu et al.

Summary: A novel nanoscale hollow-shell CeO2 sensor with high stability, sensitivity and selectivity for acetone gas detection was developed, showing a sensing response of 270% and excellent selectivity among other gases.

APPLIED SURFACE SCIENCE (2022)

Article Chemistry, Analytical

Sea urchins-like WO3 as a material for resistive acetone gas sensors

Qiao Wang et al.

Summary: Tungsten oxide (WO3) with different morphologies including sea urchin shape exhibited excellent sensitivity and ultrafast response to acetone. Temperature studies using Raman spectroscopy revealed changes in the WO3 structures and expanded the understanding of interactions between gas and sensing materials. The special urchin-shaped structure and oxygen activity regulation contribute to the outstanding sensing properties of the WO3-based sensors.

SENSORS AND ACTUATORS B-CHEMICAL (2022)

Article Nanoscience & Nanotechnology

Engineering SnO2 nanorods/ethylenediamine-modified graphene heterojunctions with selective adsorption and electronic structure modulation for ultrasensitive room-temperature NO2 detection

Shengliang Zheng et al.

Summary: This study investigates the engineering of tin dioxide nanorods/ethylenediamine-modified reduced graphene oxide heterojunctions for highly sensitive and selective detection of NO2 at room temperature. By modifying the electronic structure and adsorption properties, the sensing performance of NO2 is synergistically enhanced.

NANOTECHNOLOGY (2021)

Article Chemistry, Analytical

SnO2 nanowires decorated by insulating amorphous carbon layers for improved room-temperature NO2 sensing

Myung Sik Choi et al.

Summary: Gas sensors were fabricated by decorating amorphous carbon layers on SnO2 nanowires, without the need for pretreatment or functionalization, and operated at room temperature. The amorphous carbon increased surface area and improved NO(2) gas sensing by providing electronic effects to the SnO2.

SENSORS AND ACTUATORS B-CHEMICAL (2021)

Article Chemistry, Physical

Improved acetone sensing characteristics of TiO2 nanobelts with Ag modification

Hao Zhu et al.

Summary: This study focused on the facile synthesis of silver-modified TiO2 nanobelts for enhanced sensitivity to acetone gas, showing excellent acetone sensing properties with high response, short response and recovery time, good linear dependence with the acetone concentration, superior long-term stability, and high selectivity against other gases.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Article Chemistry, Physical

High-performance acetone gas sensor based on Pt-Zn2SnO4 hollow octahedra for diabetic diagnosis

Nguyen Hong Hanh et al.

Summary: This study demonstrates the enhanced acetone-sensing performance of a gas sensor decorated with ultrafine Pt nanoparticles on the surface of Zn2SnO4 (ZTO) hollow octahedra. The sensor showed excellent selectivity, repeatability, and stability in detecting acetone at ppb level, making it suitable for breath analysis in diabetes diagnosis. The Pt-ZTO sensor exhibited a 36.9-fold enhancement in response to acetone compared to pristine ZTO, showcasing the potential for improved gas-sensing efficiency in diabetes diagnosis.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Article Materials Science, Multidisciplinary

Ultrasensitive acetone sensor based on holey zinc oxide nanosheets doped by gold nanoparticles

Jiaxiong Guo et al.

Summary: Acetone, a biomarker present in low concentrations in human breath gas, requires a simple and noninvasive method for trace determination. An ultrasensitive acetone sensor based on gold-doped zinc oxide nanosheets has been developed, showing high sensitivity and selectivity to acetone with a detection limit of 0.2 ppm.

MATERIALS LETTERS (2021)

Article Chemistry, Physical

A rule for operation temperature selection of a conductometric VOC gas sensor based on ZnO nanotetrapods

Fang Xu et al.

Summary: The study investigated the effects of different temperatures on the selectivity and response of a ZnO nanotetrapod-based sensor to four common volatile organic compounds. Results showed that the optimal detection temperatures for formaldehyde and acetone are different, with selectivity shifting at 260 degrees C. Temperature selection for maximizing response magnitude and selectivity to formaldehyde differs, indicating a need for a compromise between selectivity and response magnitude based on the molecular structure of the target gas.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Article Nanoscience & Nanotechnology

Enhanced acetone sensing properties based on in situ growth SnO2 nanotube arrays

Pengfei Cheng et al.

Summary: Large-scale and well-aligned SnO2 nanotube arrays were synthesized on the surface of Al2O3 ceramic tubes using a cost-effective template self-etching method. The sensor exhibited excellent response and selectivity to acetone gas, showing promising potential in monitoring and detecting acetone. The unique hollow structure and controllable growth strategy contribute to the high sensing performance of the sensor.

NANOTECHNOLOGY (2021)

Article Chemistry, Analytical

Synthesis of the ZnFe2O4/ZnSnO3 nanocomposite and enhanced gas sensing performance to acetone

Weiwei Guo et al.

Summary: The ZnFe2O4/ZnSnO3 nanocomposite was prepared and characterized, showing excellent gas-sensing performance towards acetone due to its specific surface area, oxygen vacancy, and n-n heterojunction. This nanocomposite exhibited fast response, long-term stability, and good humidity resistance, making it a promising candidate for gas sensor applications.

SENSORS AND ACTUATORS B-CHEMICAL (2021)

Article Chemistry, Analytical

MOF-derived Au-loaded Co3O4 porous hollow nanocages for acetone detection

Zhou Li et al.

Summary: Metal-organic-framework-derived nanostructured metal oxides, particularly Co3O4 porous hollow nanocages with Au-loading, displayed excellent acetone-sensing performance. The optimum sensor achieved a large response to 100 ppm acetone with a low detection limit at 1 ppm. Additionally, a sensor array combining pure Co3O4 and Au/Co3O4-4 sensors, along with PCA analysis, effectively distinguished acetone from other interfering gases.

SENSORS AND ACTUATORS B-CHEMICAL (2021)

Article Chemistry, Analytical

Controlled synthesis of electrospun hollow Pt-loaded SnO2 microbelts for acetone sensing

Peresi Majura Bulemo et al.

Summary: Novel synthesis techniques were employed to fabricate SiO2@SnO2 core-shell microbelts and hollow SnO2 microbelts, which were sensitized with platinum nanoparticles to enhance their acetone detection capability. The sensitized SnO2 microbelts showed significantly higher response to 2 ppm acetone and faster response time compared to pristine SnO2 microbelts. The sensor based on sensitized SnO2 microbelts also exhibited promising stability and repeatability toward acetone exposure in a humid environment.

SENSORS AND ACTUATORS B-CHEMICAL (2021)

Article Chemistry, Analytical

Oxygen vacancy-based Tb-doped SnO2 nanotubes as an ultra-sensitive sensor for ethanol detection

Li Wang et al.

Summary: In this study, terbium-doped SnO2 nanotubes were synthesized and characterized for gas sensing applications. XPS analysis revealed that 7% terbium-doped SnO2 showed the best sensitivity to ethanol at 100 ppm, reaching 53.6 at 200 degrees Celsius. The doping of terbium increased the number of active sites on the surface of SnO2, enhancing gas sensitivity and electrical responsiveness.

SENSORS AND ACTUATORS B-CHEMICAL (2021)

Article Chemistry, Analytical

ZIF-8 derived ZnO polyhedrons decorated with biomass derived nitrogen-doped porous carbon for enhanced acetone sensing

Xiao Chang et al.

Summary: The study shows that chrysanthemum tea derived NPC can form ZnO/NPC heterostructure as a novel acetone sensor, with significantly higher response compared to pure ZnO and NPC. DFT calculations demonstrate stronger adsorption energy between acetone molecules and ZnO/NPC heterostructure.

SENSORS AND ACTUATORS B-CHEMICAL (2021)

Article Chemistry, Physical

Acetone Sensing and Catalytic Conversion by Pd-Loaded SnO2

Pascal M. Gschwend et al.

Summary: The addition of Pd onto nanostructured SnO2 can either enhance or deteriorate the gas sensor performance, depending on the loading and operating temperature. Optimal sensor performance is achieved with Pd loadings of less than 0.2 mol% and operating temperatures of 200-262.5 degrees C, where acetone conversion is around 50%.

MATERIALS (2021)

Article Chemistry, Physical

Excellent gas-sensitive properties towards acetone of In2O3 nanowires prepared by electrospinning

Yanhan Che et al.

Summary: In2O3 nanowires were synthesized successfully and characterized with uniform thickness, structural integrity, and high purity. The In2O3 sensor showed improved response to acetone compared to previously published sensors in gas-sensitive tests.

COLLOID AND INTERFACE SCIENCE COMMUNICATIONS (2021)

Article Chemistry, Analytical

MoS2 nanosheets-decorated SnO2 nanofibers for enhanced SO2 gas sensing performance and classification of CO, NH3 and H2 gases

Nguyen Ngoc Viet et al.

Summary: Decoration of SnO2 nanofibers with MoS2 nanosheets enhances gas-sensing properties, leading to improved response and reduced operating temperature towards SO2 gas. The sensors also exhibit low detection limit and good selectivity for SO2 gas.

ANALYTICA CHIMICA ACTA (2021)

Article Chemistry, Analytical

Highly selective detection of acetone by TiO2-SnO2 heterostructures for environmental biomarkers of diabetes

Bharat Sharma et al.

Summary: The study developed TiO2-SnO2 heterostructures sensors using a novel fabrication technique and investigated the adsorption properties of acetone gas on different surfaces through DFT calculations. The sensor showed ultra-sensitive response towards acetone vapors, high selectivity, repeatability, and long-term stability. The results provide a foundation for the development of advanced gas sensors for detecting hazardous materials in human environments, particularly for diabetic patients.

SENSORS AND ACTUATORS B-CHEMICAL (2021)

Article Chemistry, Multidisciplinary

Bimetallic organic framework-derived SnO2/Co3O4 heterojunctions for highly sensitive acetone sensors

Lixia Sun et al.

Summary: A SnO2/Co3O4 composite with porous structures and heterogeneous compositions has been successfully synthesized, exhibiting improved sensing performance and better selectivity and stability at 275 degrees C. This excellent performance is attributed to the synergistic effect of Co3+ catalysis and the formation of p-n heterojunctions.

NEW JOURNAL OF CHEMISTRY (2021)

Article Chemistry, Analytical

Porosity controlled 3D SnO2 spheres via electrostatic spray: Selective acetone sensors

Hee-Jin Cho et al.

SENSORS AND ACTUATORS B-CHEMICAL (2020)

Article Chemistry, Analytical

Novel ultrathin mesoporous ZnO-SnO2 n-n heterojunction nanosheets with high sensitivity to ethanol

Shuaiwei Qin et al.

SENSORS AND ACTUATORS B-CHEMICAL (2020)

Article Chemistry, Analytical

High-performance acetone gas sensor based on Ru-doped SnO2 nanofibers

Xueying Kou et al.

SENSORS AND ACTUATORS B-CHEMICAL (2020)

Article Chemistry, Physical

Construction of novel Pd-SnO2 composite nanoporous structure as a high-response sensor for methane gas

Lijia Yao et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Review Materials Science, Multidisciplinary

Recent advances and perspectives on constructing metal oxide semiconductor gas sensing materials for efficient formaldehyde detection

Zejun Han et al.

JOURNAL OF MATERIALS CHEMISTRY C (2020)

Article Chemistry, Physical

Nanosheet-assembled, hollowed-out hierarchical γ-Fe2O3 microrods for high-performance gas sensing

Zhijia Song et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Article Engineering, Environmental

Rational shape control of porous Co3O4 assemblies derived from MOF and their structural effects on n-butanol sensing

Mingjing Wang et al.

JOURNAL OF HAZARDOUS MATERIALS (2019)

Article Chemistry, Analytical

Ultrathin SnO2 nanosheets with dominant high-energy {001} facets for low temperature formaldehyde gas sensor

Ran Xu et al.

SENSORS AND ACTUATORS B-CHEMICAL (2019)

Article Chemistry, Analytical

Hydrothermal synthesis of Bi-doped SnO2/rGO nanocomposites and the enhanced gas sensing performance to benzene

Weiwei Guo et al.

SENSORS AND ACTUATORS B-CHEMICAL (2019)

Article Chemistry, Physical

Ultra-highly sensitive and selective H2S gas sensor based on CuO with sub-ppb detection limit

Dengji Li et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)

Article Nanoscience & Nanotechnology

SnO2 Nanosheets for Selective Alkene Gas Sensing

Pil Gyu Choi et al.

ACS APPLIED NANO MATERIALS (2019)

Article Chemistry, Analytical

On the high response towards TEA of gas sensors based on Ag-loaded 3D porous ZnO microspheres

Zheng Shen et al.

SENSORS AND ACTUATORS B-CHEMICAL (2018)

Article Polymer Science

Nickel Based Paddle-Wheel Metal-Organic Frameworks Towards Adsorption of O3 and SO2 Molecules: Quantum-Chemical Calculations

Ali Shokuhi Rad et al.

JOURNAL OF INORGANIC AND ORGANOMETALLIC POLYMERS AND MATERIALS (2017)

Article Chemistry, Analytical

Highly sensitive and low detection limit of ethanol gas sensor based on hollow ZnO/SnO2 spheres composite material

Jiangyang Liu et al.

SENSORS AND ACTUATORS B-CHEMICAL (2017)

Article Chemistry, Analytical

Enhanced formaldehyde sensing properties of hollow SnO2 nanofibers by graphene oxide

Ding Wang et al.

SENSORS AND ACTUATORS B-CHEMICAL (2017)

Article Chemistry, Multidisciplinary

Highly Efficient Gas Sensor Using a Hollow SnO2 Microfiber for Triethylamine Detection

Yihui Zou et al.

ACS SENSORS (2017)

Article Nanoscience & Nanotechnology

Microwave-Assisted Synthesis of Graphene-SnO2 Nanocomposites and Their Applications in Gas Sensors

Hyoun Woo Kim et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Article Nanoscience & Nanotechnology

Enhanced Gas Sensing Properties of SnO2 Hollow Spheres Decorated with CeO2 Nanoparticles Heterostructure Composite Materials

Jiangyang Liu et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Article Engineering, Electrical & Electronic

Low temperature hydrogen sensing using reduced graphene oxide and tin oxide nanoflowers based hybrid structure

A. Venkatesan et al.

SEMICONDUCTOR SCIENCE AND TECHNOLOGY (2016)

Article Chemistry, Physical

Preparation of porous flower-like SnO2 micro/nano structures and their enhanced gas sensing property

Haibo Ren et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2015)

Article Chemistry, Analytical

Preparation of porous SnO2 microcubes and their enhanced gas-sensing property

Jiarui Huang et al.

SENSORS AND ACTUATORS B-CHEMICAL (2015)

Article Chemistry, Analytical

High triethylamine-sensing properties of NiO/SnO2 hollow sphere P-N heterojunction sensors

Dianxing Ju et al.

SENSORS AND ACTUATORS B-CHEMICAL (2015)

Article Chemistry, Multidisciplinary

A Benzobisimidazolium-Based Fluorescent and Colorimetric Chemosensor for CO2

Zhiqian Guo et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2012)

Article Chemistry, Analytical

Porous flower-like SnO2 nanostructures as sensitive gas sensors for volatile organic compounds detection

Cuiping Gu et al.

SENSORS AND ACTUATORS B-CHEMICAL (2012)

Article Chemistry, Analytical

Effective VOCs gas sensor based on porous SnO2 microcubes prepared via spontaneous phase segregation

Jiarui Huang et al.

SENSORS AND ACTUATORS B-CHEMICAL (2012)

Article Chemistry, Multidisciplinary

Reducing Sugar: New Functional Molecules for the Green Synthesis of Graphene Nanosheets

Chengzhou Zhu et al.

ACS NANO (2010)

Article Chemistry, Physical

One-Step Synthesis and Gas-Sensing Characteristics of Uniformly Loaded Pt@SnO2 Nanorods

Xinyu Xue et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2010)