☆ 4.7 Article

Analysis on microstructure and mechanical properties of Ti-47.5Al-3Nb-1.5Cr alloy through heat-treatment

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

Microscale investigation of perovskite-Ti3AlC strengthening and plastic deformation in high niobium containing TiAl alloys

Mingao Li et al.

Summary: The study shows that dispersive perovskite-Ti3AlC can strengthen TiAl alloys and contribute to better plastic deformation and elongation in high niobium containing TiAl alloys. Transmission electron microscopy and high-resolution transmission electron microscopy reveal the dislocation gliding and twinning mechanism during plastic deformation, as well as the relationship between perovskite-Ti3AlC and the neighboring matrix phase.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Phase transition and nano-mechanical properties of directionally solidified Sn-Co peritectic alloy

Jinmian Yue et al.

Summary: In this study, directional solidification method was used to investigate the growth characteristics of intermetallic compounds in Sn-9at.%Co peritectic alloy. The transition of the leading phase was found to occur at a distance that increased with growth velocity, and the hardness was observed to increase with growth velocity as well.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Fabrication of ?-TiAl intermetallic alloy using the twin-wire plasma arc additive manufacturing process: Microstructure evolution and mechanical properties

Lin Wang et al.

Summary: This study introduces a new twin-wire plasma arc additive manufacturing technique for fabricating β-TiAl intermetallic alloy, which results in a more uniform microstructure compared to previous techniques. The investigation shows that the fabricated alloy exhibits different phase composition and mechanical properties at different sections.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

Add to Collection

Article Chemistry, Physical

Effects of Cr alloying on the evolution of solidification microstructure and phase transformations of high-Nb containing γ-TiAl based alloys

Vajinder Singh et al.

Summary: The evolution of as-solidified microstructures and phase stability during high-temperature exposure of Ti-45Al base alloys with alloying elements Nb, Cr, and B were analyzed. It was found that Nb, Cr, and B can be effective grain size refiners, but strong Cr partitioning significantly slows down the kinetics of beta-phase decomposition.

INTERMETALLICS (2021)

Add to Collection

Article Chemistry, Physical

Effects of the addition of transition metals on phase equilibria and phase transformations in TiAl systems in between 1473 and 1073 K

Ali Shaaban et al.

Summary: The experimental study investigated the effects of transition metals on phase transformations in TiAl systems with different Al compositions at temperatures between 1473 and 1073 K. Microstructure evolutions and elemental compositions in different phases were examined, as well as the movements of the threephase tie triangle and changes of tie-lines at different temperatures to estimate the stability of alpha and alpha 2.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Chemistry, Physical

Phase selection and nano-mechanical properties of intermetallic compounds in directionally solidified Cu-68at.%Sn peritectic alloy

Anqiao Zhang et al.

Summary: In this study, directional solidification method was used to investigate the growth characteristics of intermetallic compounds in Cu-68at.%Sn alloys. The research found that growth velocity affects the transition of primary phase, and conclusions about phase transition velocity and properties were obtained through the Interface Response Function and hardness testing.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Chemistry, Physical

Phase transformation and microstructure evolution of a beta-solidified gamma-TiAl alloy

Haitao Huang et al.

Summary: In this study, TiAl alloy with a nominal composition of Ti-43.5Al-6V-1Cr was fabricated using inductive skull melting technology. The microstructure evolution and formation mechanism were investigated through quenching experiments. The study identified phase transition equations and reaction temperatures during heating from room temperature to 1350 degrees Celsius, as well as deduced the phase transformation process during heating and cooling.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Engineering, Chemical

Fabrication of TiAl alloys turbocharger turbine wheel for engines by metal injection molding

Yanjun Liu et al.

Summary: TiAl turbine wheels fabricated using near-net shaping MIM technology exhibit high acceleration responsiveness and low energy consumption, with better rheological properties and excellent mechanical properties shown in the microstructure. This work provides a valuable method for fabricating complex-shaped TiAl turbine wheels.

POWDER TECHNOLOGY (2021)

Add to Collection

Article Chemistry, Physical

Growth velocity and microhardness dependences of intermetallic compound phases on solubility range during peritectic solidification

Peng Peng et al.

Summary: The relationship between the solidification characteristics of intermetallic compound phases (IMCs) and the growth behavior of secondary branches has been investigated. The study found that solid phases with larger solubility ranges tend to have larger growth velocity of secondary branches under the same growth conditions. Additionally, the microhardness of IMCs is also dependent on the growth velocity and their solubility range.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Chemistry, Physical

Influence of Nb on Ti diffusion in γ-TiAl intermetallics studied by mechanical spectroscopy

J. Ibanez-Perez et al.

Summary: This study demonstrates the hindering effect of Nb on the diffusion of Ti atoms in the α(2)-Ti3Al phase through mechanical spectroscopy measurements, with the activation energy increasing with Nb content. The mechanism of next-neighbor interaction of Nb atoms with the local configuration of Ti-V-Ti is proposed to explain the observed experimental behavior, leading to a further broadening of the relaxation peak.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Chemistry, Physical

Hot tensile behavior of a TiAl alloy with a (β0 + γ) microduplex microstructure prepared simply by heat treatments

Liang Cheng et al.

Summary: A (β(0) + γ) microduplex microstructure was prepared in a Ti-42Al-8.5V alloy by quenching-tempering treatments, showing near-superplastic creep behavior at high temperatures. The high elongations were attributed to crystal rotation and fragmentation due to plastic flow and recrystallization. The γ platelets globularized/coarsened during deformation, leading to significant orientation divergence.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Effect of multi-stage heat treatment on mechanical properties and microstructure transformation of Ti-48Al-2Cr-2Nb alloy

Seungkyun Yim et al.

Summary: The study introduced a multi-stage heat treatment method to refine the microstructure of Ti-48Al-2Cr-2Nb alloy, achieving a tailored duplex structure with improved tensile strength and elongation. This study provides a simple pathway to refine the grain size and interlamellar spacing of gamma-TiAl alloys.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

Add to Collection

Article Chemistry, Physical

Enhancing the creep resistance of electron beam melted gamma Ti-48Al-2Cr-2Nb alloy by using two-step heat treatment

Young-Kyun Kim et al.

INTERMETALLICS (2020)

Add to Collection

Article Chemistry, Physical

Dynamic recrystallization of a β(B2)-Stabilized γ-TiAl based Ti-45Al-8Nb-2Cr-0.2B alloy: The contributions of constituent phases and Zener-Hollomon parameter modulated recrystallization mechanisms

Vajinder Singh et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Refinement of massive γ phase with enhanced properties in a Ta containing γ-TiAl-based alloys

Keren Zhang et al.

SCRIPTA MATERIALIA (2019)

Add to Collection

Article Chemistry, Physical

Tailoring microstructure and chemical composition of advanced gamma-TiAl based alloys for improved creep resistance

Michael Kastenhuber et al.

INTERMETALLICS (2018)

Add to Collection

Article Chemistry, Physical

Phase transformation and microstructural control of the α-solidifying γ-Ti-45Al-2Nb-0.7Cr-0.3Si intermetallic alloy

M. N. Mathabathe et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructure and mechanical properties of vacuum diffusion bonding joints for γ-TiAl based alloy

Zhihao Du et al.

VACUUM (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructure and properties of a beta-solidifying TiAl-based alloy with different refiners

Ning Cui et al.

RARE METALS (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Solidification microstructure characteristics of Ti-44Al-4Nb-2Cr-0.1B alloy under various cooling rates during mushy zone

Peng Han et al.

RARE METALS (2016)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Microstructures, micro-segregation and solidification path of directionally solidified Ti-45Al-5Nb alloy

Liang-shun Luo et al.

CHINA FOUNDRY (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Intermetallic titanium aluminides in aerospace applications - processing, microstructure and properties

Helmut Clemens et al.

MATERIALS AT HIGH TEMPERATURES (2016)

Add to Collection

Review Materials Science, Multidisciplinary

Modeling concepts for intermetallic titanium aluminides

F. Appel et al.

PROGRESS IN MATERIALS SCIENCE (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Carbon distribution in multi-phase gamma-TiAl based alloys and its influence on mechanical properties and phase formation

Thomas Klein et al.

ACTA MATERIALIA (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Widmannstatten laths in Ti48Al2Cr2Nb alloy by undercooled solidification

Yi Liu et al.

MATERIALS CHARACTERIZATION (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Grain refinement by trace TiB2 addition in conventional cast TiAl-based alloy

Jianchao Han et al.

MATERIALS CHARACTERIZATION (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Solidification characteristics of high Nb-containing γ-TiAl-based alloys with different aluminum contents

Yi Liu et al.

RARE METALS (2015)

Add to Collection

Article Chemistry, Physical

Phase transformation and microstructure evolution of differently processed Ti-45Al-9Nb-Y alloy

S. Z. Zhang et al.

INTERMETALLICS (2012)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Tuning mechanical properties for β(B2)-containing TiAl intermetallics

Qiu Cong-zhang et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2012)

Add to Collection

Article Chemistry, Physical

Alloy design concepts for refined gamma titanium aluminide based alloys

R. M. Imayev et al.

INTERMETALLICS (2007)

Add to Collection

Article Chemistry, Physical

Intermetallics: Why is it so difficult to introduce them in gas turbine engines?

Alain Lasalmonie

INTERMETALLICS (2006)

Add to Collection

Article Nanoscience & Nanotechnology

Microstructure refinement of cast TiAl alloys by β solidification

YG Jin et al.

SCRIPTA MATERIALIA (2004)

Add to Collection

Article Materials Science, Multidisciplinary

Hall-Petch relationship in two-phase TiAl alloys with fully lamellar microstructures

JC Tang et al.

MATERIALS RESEARCH BULLETIN (2002)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructural refinement and improvement of mechanical properties and oxidation resistance in EPM TiAl-based intermetallics with yttrium addition

Y Wu et al.

ACTA MATERIALIA (2002)

Add to Collection

Review Materials Science, Multidisciplinary

High-temperature structural intermetallics

M Yamaguchi et al.

ACTA MATERIALIA (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.