☆ 4.7 Article

Large eddy simulation of compound angle film cooling with vortex generators

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2022)

Related references

Note: Only part of the references are listed.

Article Thermodynamics

Experimental study of transverse trench effect on unsteady film cooling effectiveness of backward cylindrical-holes with various compound angles

Tiao Zhang et al.

Summary: An experimental investigation was conducted on the effect of transverse trench on unsteady film cooling performances of backward cylindrical-holes with various compound angles using time-resolved thermal infrared technique. The results showed that the trench can significantly improve effectiveness, reduce effectiveness unsteadiness, but also increase flow loss.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2021)

Add to Collection

Article Thermodynamics

Adiabatic effectiveness and heat transfer measurements of simple and trenched cylindrical holes with backward injection

Bo Shi et al.

Summary: Recent studies have shown that in high blowing ratios, the simple cylindrical hole with backward injection has advantages, with uniform adiabatic effectiveness in the spanwise direction and stable cooling performance. The narrow trench combined with forward injection greatly enhances effectiveness, but the enhancement for simple backward injection is limited.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2021)

Add to Collection

Article Thermodynamics

Large eddy simulation of film cooling with different upstream obstacles

Majie Zhao et al.

Summary: Large eddy simulations of jet in crossflow with modified upstream obstacles were conducted to enhance film cooling performance. The results showed that the designed obstacles improved flow structure and adiabatic cooling efficiency. Among the obstacles considered, the ramp had the best overall film cooling performance.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2021)

Add to Collection

Article Thermodynamics

A comperative experimental study between the film effectiveness of trench and diffusion film holes

Sainathkaushik Balaji et al.

Summary: Gas turbine airfoils are often subjected to high temperature gases in order to extract maximum power. Film cooling holes and trenches are used as a solution to protect the airfoil surfaces. This study found that the compound-angle-trench geometry produced the highest film cooling effectiveness, especially in both streamwise and spanwise directions, with a blowing ratio of 1 being the optimum value for the best distribution of film effectiveness.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2021)

Add to Collection

Article Thermodynamics

Hotspot thermal management in microchannel heat sinks with vortex generators

Gaofeng Lu et al.

Summary: This paper investigates hotspot-targeted thermal management using VGs in microchannels, showing that the adoption of VGs can significantly improve cooling effect over the hotspot with lower pressure loss.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2021)

Add to Collection

Article Thermodynamics

Thermal performance analysis of fin-tube heat exchanger with staggered tube arrangement in presence of rectangular winglet pairs

Hemant Naik et al.

Summary: The study investigates the effects of winglet type vortex generators on fin-tube heat exchanger performance, emphasizing the importance of optimal winglet positions and inlet flow conditions in enhancing thermohydraulic performance. The relationship between heat transfer, secondary flow, and irreversibility parameters is analyzed to understand the overall impact on thermal performance.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2021)

Add to Collection

Article Thermodynamics

Large eddy simulation of an inclined jet in crossflow with vortex generators

Zhiyuan Zhao et al.

Summary: The study on film cooling with delta winglet vortex generator pair (DWVGP) shows that vortical structures have a significant impact on film cooling effectiveness in the flow field of a jet in crossflow (JICF). The DWVGP evolved anti-CRVP allows for earlier reattachment of coolant and achieves enhanced film cooling effectiveness in the spanwise direction.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

Add to Collection

Article Thermodynamics

Improvement of film cooling effectiveness on a flat surface subjected to streamwise pressure gradient by using ramp

Ahmet Umit Tepe

Summary: This study numerically investigated the influence of a triangular with concave edge shaped ramp on film cooling effectiveness and flow characteristics. The results showed that mounting the ramp on the surface has the potential to greatly enhance film cooling effectiveness by counteracting the detrimental effects of streamwise pressure gradient.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2021)

Add to Collection

Article Thermodynamics

Numerical comparison of saw-tooth plasma actuators for film cooling flow control over a flat plate

Guozhan Li et al.

Summary: Large eddy simulations were conducted to study film cooling efficiency of an inclined round jet in crossflow with and without a saw-tooth plasma actuator (STPA). Results show that the STPA may not always be advantageous to film cooling. When the tip of the STPA is located at the centerline, it can enhance film cooling efficiency by inducing coolant outward along the wall and promoting the spanwise-coverage of the coolant through anti-counter rotating vortex pair (CRVP).

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2021)

Add to Collection

Article Thermodynamics

An experimental study on the improvements in the film cooling performance by an upstream micro-vortex generator

Kuan Zheng et al.

Summary: This study demonstrates that placing a micro-vortex generator upstream of the cooling hole can enhance film cooling performance, particularly at high blowing ratios. The upstream VG counteracts the detrimental effects of the coolant jet, leading to extended coverage of cooling gas in the spanwise direction.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2021)

Add to Collection

Article Thermodynamics

Combined experimental and numerical studies on flow characteristic and heat transfer in ribbed channels with vortex generators of various types and arrangements

Guohua Zhang et al.

Summary: This study numerically and experimentally explores the heat transfer performances and flow characteristics of vortex generators in a high aspect ratio rectangular ribbed channel. Different types and arrangements of vortex generators are compared, with winglet vortex generators showing superior performance. Longitudinal vortex generators are found to enhance flow mixing and improve heat transfer performance.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2021)

Add to Collection

Article Thermodynamics

Numerical study of using dean vortices to enhance the film cooling performance for fan shaped hole

Pingting Chen et al.

Summary: This study presents a new film cooling hole design using curved holes to generate Dean Vortices for enhanced cooling effectiveness. The comparison of different hole shapes at various blowing ratios reveals that the curved and reversed curved holes exhibit higher film cooling effectiveness values.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2021)

Add to Collection

Article Thermodynamics

Effect of partial blockage on flow and heat transfer of film cooling with cylindrical and fan-shaped holes

Xiaohu Chen et al.

Summary: The study shows that the degree of blockage affects the film cooling effectiveness of cylindrical and fan-shaped holes, with fan-shaped holes having a stronger blockage tolerance. The blockage alters the flow characteristics and can lead to the formation of different vortex structures downstream, impacting the overall cooling performance.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2021)

Add to Collection

Article Thermodynamics

Effects of mainstream attack angles on film-cooling effectiveness of double-jet film-cooling

Jianhong He et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2020)

Add to Collection

Article Thermodynamics

Comparative study on the adiabatic film cooling performances with elliptical or super-elliptical holes of various length-to-width ratios

Guohua Zhang et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2020)

Add to Collection

Article Thermodynamics

Air side heat transfer enhancement using radiantly arranged winglets in fin-and-tube heat exchanger

Mingjie Li et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2020)

Add to Collection

Article Thermodynamics

Heat transfer enhancement in panel type radiators using delta-wing vortex generators

Luciano Garelli et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2019)

Add to Collection

Article Thermodynamics

Multi-fidelity model based optimization of shaped film cooling hole and experimental validation

Hao Zhang et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

Add to Collection

Article Thermodynamics

Optimization of the Coanda bump to improve the film cooling effectiveness of an inclined slot

Jung Uk Choi et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2019)

Add to Collection

Article Thermodynamics

Numerical analysis and parametric optimization on flow and heat transfer of a microchannel with longitudinal vortex generators

Jian-Fei Zhang et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2019)

Add to Collection

Article Thermodynamics

Performance evaluation of a converging-diverging film-cooling hole

Jun-Hee Kim et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2019)

Add to Collection

Article Thermodynamics

Experimentally measured effects of height and location of the vortex generator on flow and heat transfer characteristics of the flat-plate film cooling

Chao Zhang et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

Add to Collection

Article Thermodynamics

Vortex dynamics based analysis of internal crossflow effect on film cooling performance

Ziyu Chen et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

Add to Collection

Article Engineering, Mechanical

Cooling Effectiveness for a Shaped Film Cooling Hole at a Range of Compound Angles

Shane Haydt et al.

JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME (2019)

Add to Collection

Article Thermodynamics

Numerical study on the near-wall characteristics of compound angled film cooling based on hybrid thermal lattice Boltzmann method

Xian Wang et al.

APPLIED THERMAL ENGINEERING (2018)

Add to Collection

Article Thermodynamics

On the Flow Structures and Adiabatic Film Effectiveness for Simple and Compound Angle Hole With Varied Length-to-Diameter Ratio by Large Eddy Simulation and Pressure-sensitive Paint Techniques

Weihong Li et al.

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2017)

Add to Collection

Article Thermodynamics

Experimental investigations on the effects of inclination angle and blowing ratio on the flat-plate film cooling enhancement using the vortex generator downstream

Liming Song et al.

APPLIED THERMAL ENGINEERING (2017)

Add to Collection

Article Thermodynamics

Effects of compound angle on film cooling effectiveness with different streamwise pressure gradient and convex curvature

Yanmin Qin et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2015)

Add to Collection

Article Thermodynamics

Large-eddy simulation of an inclined round jet issuing into a crossflow

E. Sakai et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2014)

Add to Collection

Article Engineering, Mechanical

Modal Analysis of Inclined Film Cooling Jet Flow

Prasad Kalghatgi et al.

JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME (2014)

Add to Collection

Review Green & Sustainable Science & Technology

An overview on heat transfer augmentation using vortex generators and nanofluids: Approaches and applications

H. E. Ahmed et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2012)

Add to Collection

Article Mechanics

Contributions of the wall boundary layer to the formation of the counter-rotating vortex pair in transverse jets

Fabrice Schlegel et al.

JOURNAL OF FLUID MECHANICS (2011)

Add to Collection

Article Engineering, Mechanical

Influence of Flow Structure on Compound Angled Film Cooling Effectiveness and Heat Transfer

Vipluv Aga et al.

JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME (2011)

Add to Collection

Article Engineering, Aerospace

Inclined Jet in Crossflow Interacting with a Vortex Generator

K. B. M. Q. Zaman et al.

JOURNAL OF PROPULSION AND POWER (2010)

Add to Collection

Article Engineering, Aerospace

Gas turbine film cooling

DG Bogard et al.

JOURNAL OF PROPULSION AND POWER (2006)

Add to Collection

Review Thermodynamics

A review of shaped hole turbine film-cooling technology

RS Bunker

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2005)

Add to Collection

Review Thermodynamics

Heat transfer - a review of 2002 literature

RJ Goldstein et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2005)

Add to Collection

Review Multidisciplinary Sciences

Materials science - Thermal barrier coatings for gas-turbine engine applications

NP Padture et al.

SCIENCE (2002)

Add to Collection

Article Mechanics

On the formation of the counter-rotating vortex pair in transverse jets

L Cortelezzi et al.

JOURNAL OF FLUID MECHANICS (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.