☆ 4.7 Article

Evaluation of entropy generation characteristics of boehmite-alumina nanofluid with different shapes of nanoparticles in a helical heat sink

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2022)

Related references

Note: Only part of the references are listed.

Article Thermodynamics

Thermofluidic characteristic of a nanofluid-cooled oblique fin heat sink: An experimental and numerical investigation

Badyanath Tiwary et al.

Summary: This study investigates the thermofluidic performance of Al2O3-water nanofluids through oblique fin heat sink microchannels, showing that the combination of nanofluids and oblique fins significantly enhances heat transfer efficiency. The oblique fin microchannel promotes secondary flow and improves mixing, leading to a substantial increase in heat transfer coefficient compared to straight microchannels. Additionally, the inclusion of nanofluids at higher concentrations and Reynolds numbers further enhances heat transfer performance.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2022)

Add to Collection

Article Engineering, Mechanical

Effect of nanoparticle shape on cooling performance of boehmite-alumina nanofluid in a helical heat sink for laminar and turbulent flow regimes

Amin Shahsavar et al.

Summary: This study investigates the effects of different nanoparticle shapes on flow and heat transfer characteristics in a microchannel helical heat sink. The study finds that the utilization of nanofluids significantly improves heat transfer while increasing pumping power. It also reveals that the nanoparticle shape strongly influences the parameters, with platelet shaped particles being the most advantageous.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2022)

Add to Collection

Article Engineering, Chemical

Heat transfer characteristics and flow features of nanofluids in parallel flat minichannels

Hongyan Wang et al.

Summary: Nanofluid in a mini/microchannel heat sink shows high single-phase enhancement of heat transfer. The Nusselt number reaches the maximum increment at a concentration of 0.01% for Al2O3-H2O nanofluid, and the friction factor increases by 15.1%. Low-concentration nanofluids demonstrate efficient heat transfer under low flow resistance compared to previous studies.

POWDER TECHNOLOGY (2022)

Add to Collection

Article Thermodynamics

Forced air cooled heat sink with uniformly distributed temperature of power electronic modules

Christian Bunnagel et al.

Summary: The paper discusses an approach to design a forced air-cooling heat sink that can uniformly distribute temperature on semiconductor modules. By modifying a conventional fin-based heat sink, an air guide plate is attached to redistribute airflow through the fins. Numerical simulations show that the proposed approach achieves a good uniform distribution of temperature.

APPLIED THERMAL ENGINEERING (2021)

Add to Collection

Article Thermodynamics

A computational analysis of heat transport irreversibility phenomenon in a magnetized porous channel

Souad Marzougui et al.

Summary: This paper evaluates the temperature of parallel horizontal plates by considering the Dirichlet conditions. The effects of various flow parameters on fluid flow are graphically presented and discussed. Through the application of thermodynamic irreversible principle, the study examines the influence of control parameters on flow field and entropy generation in unsteady mixed convection flow.

INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW (2021)

Add to Collection

Article Thermodynamics

Comparison of metal oxide and composite phase change material based nanofluids as coolants in mini channel heat sink

E. Jitheesh et al.

Summary: The study focuses on heat transfer and pressure drop effects of NECPCM and Al2O3 nanofluids in a mini channel heat sink. NECPCM nanofluid shows better heat transfer performance than Al2O3 nanofluid, with lower pressure drop. NECPCM nanofluids perform better at higher flow rates, and there exists an optimal flow rate to achieve maximum heat transfer enhancement and FOM value.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)

Add to Collection

Article Thermodynamics

Thermal management and temperature uniformity enhancement of electronic devices by micro heat sinks: A review

Ziqiang He et al.

Summary: Micro heat sinks are crucial for addressing the challenges of high heat flux and non-uniform temperature distribution in electronic devices. Developments in thermal enhancement technologies and reducing non-uniform temperature distribution are essential. An effective adaptive cooling method is urgently needed to improve the efficiency and lifespan of electronic components.

ENERGY (2021)

Add to Collection

Article Thermodynamics

Three-dimensional analysis of forced convection of Newtonian and non-Newtonian nanofluids through a horizontal pipe using single- and two-phase models

Naser Hazeri-Mahmel et al.

Summary: This study involves a 3D analysis of forced convection of Newtonian and non-Newtonian nanofluids through a horizontal pipe using single- and two-phase mathematical models. The results show that the non-Newtonian mixture model provides more accurate results for a volume fraction of 0.01, and the heat transfer coefficient increases with increasing solid volume fraction in the mixture models.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)

Add to Collection

Article Thermodynamics

Study on the thermal dissipation performance of GPU cooling system with nanofluid as coolant

A. Siricharoenpanich et al.

Summary: The study showed that nanoparticles suspended in the base fluid significantly impact the physical properties and flow features of the nanofluid, leading to higher heat removal capacity and lower thermal resistance. Heat sink with lower flow channels demonstrated lower thermal resistance compared to those with higher flow channels. The findings can be used to develop a knowledge base for designing thermal cooling systems for GPUs and other electronic components.

CASE STUDIES IN THERMAL ENGINEERING (2021)

Add to Collection

Article Thermodynamics

Heat transfer and pressure drop in turbulent nanofluid flow in a pin-fin heat sink: Fin and nanoparticles shape effects

Yacine Khetib et al.

Summary: This study simulated the turbulent flow of a nanofluid in a channel and investigated the effects of factors such as fin shape and nanoparticle shape on the heatsink temperature and pressure drop. The results showed that increasing velocity leads to lower heatsink temperature, and using brick-shaped nanoparticles and circular fins provides the best cooling performance. Additionally, circular fins and brick-shaped nanoparticles require less pressure drop compared to other cases.

CASE STUDIES IN THERMAL ENGINEERING (2021)

Add to Collection

Article Energy & Fuels

Design and optimization of a liquid cooled heat sink for a motor inverter in electric vehicles

Feng Han et al.

Summary: The study focused on the integrated design of liquid-cooled heat sink for a 30 kW motor inverter, selecting a serpentine channel configuration for its best cooling performance. Further optimization of the heat sink's geometrical configuration led to achieving high power density of 9.677 kW/kg. Experiment results validated the numerical simulation results, showcasing the effectiveness of the design approach.

APPLIED ENERGY (2021)

Add to Collection

Article Thermodynamics

A hybrid vapor chamber heat sink incorporating a vapor chamber and liquid cooling channel with outstanding thermal performance and hydraulic characteristics

Huawei Wang et al.

Summary: The hybrid vapor chamber heat sink (HVCHS) incorporates phase change and single-phase heat transfer in a single device, providing high cooling capacity of 1200 W and maintaining a maximum junction temperature of 95.25 degrees C with great temperature uniformity. It has a minimum thermal resistance of 0.04 degrees C/W, minimum pressure drop of 4.83 kPa, and cooling COP above 12,500 for heat inputs of more than 850 W, showing great potential for energy-saving cooling management of high-performance electronics.

ENERGY CONVERSION AND MANAGEMENT (2021)

Add to Collection

Article Thermodynamics

Entropy and convection effect on magnetized hybrid nano-liquid flow inside a trapezoidal cavity with zigzagged wall

F. Mebarek-Oudina et al.

Summary: This study investigates the laminar flow of a nanoliquid in a trapezoidal cavity and measures the convective exchanges that occur. The results show that the application of a magnetic field strongly influences the flow of the nanofluid, and the thermal performance of the cavity is improved with the increase of Ra and Hartmann numbers.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)

Add to Collection

Article Thermodynamics

Experimental and numerical investigation on the thermal performance of triple tube heat exchanger equipped with different inserts with WO3/water nanofluid under turbulent condition

Arun Kumar Tiwari et al.

Summary: This study investigated a novel design called Triple Tube Heat Exchanger to enhance overall heat transfer and effectiveness by using WO3/water nanofluid and various inserts. The results demonstrated significant thermal performance improvement with rib-type insert in both experimental and computational fluid dynamics methods.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2021)

Add to Collection

Article Thermodynamics

Second law analysis for nanofluid flow in mini-channel heat sink with finned surface: a study on fin geometries

Mostafa Azadi et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2020)

Add to Collection

Article Thermodynamics

A numerical investigation on the influence of nanoadditive shape on the natural convection and entropy generation inside a rectangle-shaped finned concentric annulus filled with boehmite alumina nanofluid using two-phase mixture model

Amin Shahsavar et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2020)

Add to Collection

Article Thermodynamics

Analysis of hydro-thermal and entropy generation characteristics of nanofluid in an aluminium foam heat sink by employing Darcy-Forchheimer-Brinkman model coupled with multiphase Eulerian model

Tehmina Ambreen et al.

APPLIED THERMAL ENGINEERING (2020)

Add to Collection

Article Thermodynamics

A novel composite pinfin heat sink for hotspot mitigation

Danish Ansari et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

Add to Collection

Article Thermodynamics

Open manifold microchannel heat sink for high heat flux electronic cooling with a reduced pressure drop

Nicholas Gilmore et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

Add to Collection

Article Engineering, Mechanical

Cu-Al2O3 hybrid nanofluid natural convection in an inclined enclosure with wavy walls partially layered by porous medium

Hakim T. Kadhim et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)

Add to Collection

Article Engineering, Mechanical

Non-Newtonian nanofluid natural convection in a U-shaped cavity under magnetic field

Farooq H. Ali et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)

Add to Collection

Article Engineering, Chemical

Influence of heat flux and Reynolds number on the entropy generation for different types of nanofluids in a hexagon microchannel heat sink

A. A. Alfaryjat et al.

CHINESE JOURNAL OF CHEMICAL ENGINEERING (2019)

Add to Collection

Article Thermodynamics

Second law analysis of turbulent convection flow of boehmite alumina nanofluid inside a double-pipe heat exchanger considering various shapes for nanoparticle

Mostafa Monfared et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2019)

Add to Collection

Article Thermodynamics

Numerical assessment into the hydrothermal and entropy generation characteristics of biological water-silver nano-fluid in a wavy walled microchannel heat sink

Abdullah A. A. A. Al-Rashed et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2019)

Add to Collection

Article Engineering, Chemical

Investigation of the nanofluid convective flow and entropy generation within a microchannel heat sink involving magnetic field

S. R. Hosseini et al.

POWDER TECHNOLOGY (2019)

Add to Collection

Article Thermodynamics

Numerical investigation of forced convection heat transfer and flow irreversibility in a novel heatsink with helical microchannels working with biologically synthesized water-silver nano-fluid

Amin Shahsavar et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2019)

Add to Collection

Article Thermodynamics

Numerical simulation of entropy generation due to unsteady natural convection in a semi-annular enclosure filled with nanofluid

Sonia Bezi et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)

Add to Collection

Article Thermodynamics

Experimental analysis of energy and friction factor for titanium dioxide nanofluid in a water block heat sink

S. S. Khaleduzzaman et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)

Add to Collection

Article Mechanics

Experimental evaluation of cooling performance of circular heat sinks for heat dissipation from electronic chips using nanofluid

Seyed Ebrahim Ghasemi et al.

MECHANICS RESEARCH COMMUNICATIONS (2017)

Add to Collection

Article Thermodynamics

Investigation of PCM-assisted heat pipe for electronic cooling

Hamidreza Behi et al.

APPLIED THERMAL ENGINEERING (2017)

Add to Collection

Article Thermodynamics

Intensification of forced convection heat transfer using biological nanofluid in a double-pipe heat exchanger

M. M. Sarafraz et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2015)

Add to Collection

Article Thermodynamics

An experimental study on the thermal and hydraulic performances of nanofluids flow in a miniature circular pin fin heat sink

Weerapun Duangthongsuk et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2015)

Add to Collection

Article Thermodynamics

Multi-objective optimization of water-cooled pinfin heatsinks

Keisuke Horiuchi et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2015)

Add to Collection

Article Thermodynamics

Optimization and comparison of double-layer and double-side micro-channel heat sinks with nanofluid for power electronics cooling

Assel Sakanova et al.

APPLIED THERMAL ENGINEERING (2014)

Add to Collection

Article Thermodynamics

Effect of different nanoparticle shapes on shell and tube heat exchanger using different baffle angles and operated with nanofluid

M. M. Elias et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2014)

Add to Collection

Article Engineering, Chemical

Effect of a magnetic field on natural convection in an inclined half-annulus enclosure filled with Cu-water nanofluid using CVFEM

M. Sheikholeslami et al.

ADVANCED POWDER TECHNOLOGY (2013)

Add to Collection

Article Thermodynamics

Analysis of entropy generation using nanofluid flow through the circular microchannel and minichannel heat sink

M. R. Sohel et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2013)

Add to Collection

Article Thermodynamics

Numerical study of forced convective heat transfer of Nanofluids: Comparison of different approaches

R. Lotfi et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2010)

Add to Collection

Article Thermodynamics

Entropy Generation Analysis for Nanofluid Flow in Microchannels

Jie Li et al.

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2010)

Add to Collection

Article Thermodynamics

Experimental determination of thermal conductivity of three nanofluids and development of new correlations

Ravikanth S. Vajjha et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2009)

Add to Collection

© Peeref 2019-2024. All rights reserved.