☆ 4.7 Article

Surface integrity and material removal mechanisms in high-speed grinding of Al/SiCp metal matrix composites

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2022)

Related references

Note: Only part of the references are listed.

Article Engineering, Industrial

Cutting deformation mechanism of SiCp/Al composites based on strain gradient theory

Yihang Fan et al.

Summary: The study shows that the presence of SiC particles changes the microstructure of the matrix material, leading to a high strain gradient in the matrix which makes the material more prone to shear deformation localization. During the cutting process, defects and breakage of SiC particles result in the formation of micro-cracks, which play a key role in chip generation. By comparing simulation and experimental results, it is found that the established theoretical model based on strain gradient better reflects the cutting process of particle-reinforced metal matrix composites.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2022)

Add to Collection

Article Engineering, Industrial

Surface integrity in high-speed grinding of Al6061T6 alloy

Sai Guo et al.

Summary: This study investigates the surface integrity and material removal mechanisms of Al6061T6 alloy during high-speed grinding. The results show that the micrograins are refined into equiaxed nanograins and continuous dynamic recrystallization occurs at decreasing depth due to high strain-rate field and reduced depth of the heat affected layer. These findings contribute to the understanding of material removal mechanisms in high-ductility materials during high-speed grinding.

CIRP ANNALS-MANUFACTURING TECHNOLOGY (2022)

Add to Collection

Article Engineering, Industrial

On understanding the specific cutting mechanisms governing the workpiece surface integrity in metal matrix composites machining

Xiao Han et al.

Summary: The machining of metal matrix composites (MMCs) presents challenges due to the mismatch of mechanical and thermal properties between the matrix and reinforced particles. This paper explores the effects of cutting regimes on surface integrity in MMC machining and identifies two different cutting mechanisms – semi-brittle and ductile cutting – based on feed rate/uncut chip thickness. The semi-brittle cutting regime leads to noticeable damaged surface morphology with a high density of fractured particles.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)

Add to Collection

Article Materials Science, Ceramics

Surface generation in high-speed grinding of brittle and tough ceramics

Amit Choudhary et al.

Summary: The study demonstrates that controlling the scallop height (S-g) can effectively reduce defects induced by grinding in ceramic components. Increasing grinding speed significantly decreases S-g, which has different effects on brittle ceramics and tougher ceramics.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Wear-induced microstructural evolution of ultra-fine grained (UFGs) aluminum

S. Wei et al.

Summary: The study found wear-induced grain refinement in UFG aluminum, with the mean contact stress playing a key role in the transition between grain growth and refinement. Hardness was observed to increase with decreasing grain size, deviating from the Hall-Petch relation. Differences in dislocation contents among samples prepared by different methods contributed to variations in wear resistance.

ACTA MATERIALIA (2021)

Add to Collection

Article Engineering, Manufacturing

Size effects in multi-scale materials processing and manufacturing

M. W. Fu et al.

Summary: Size effects are caused by changes in material parameters and can induce various behaviors and phenomena during multi-scale processing. Parts and components fabricated from multi-scale processing exhibit quality and property scatters. The paper reviews and analyzes the size effects in material processing and manufacturing, discussing future research directions and highlighting key problems to be solved.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2021)

Add to Collection

Article Engineering, Manufacturing

Surface and subsurface damage of reaction-bonded silicon carbide induced by electrical discharge diamond grinding

Xiaoshuang Rao et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2020)

Add to Collection

Review Engineering, Manufacturing

Review of ultrasonic vibration-assisted machining in advanced materials

Zhichao Yang et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2020)

Add to Collection

Review Engineering, Manufacturing

The new challenges of machining Ceramic Matrix Composites (CMCs): Review of surface integrity

Oriol Gavalda Diaz et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2019)

Add to Collection

Article Engineering, Mechanical

Surface roughness prediction model of SiCp/Al composite in grinding

Chuanmin Zhu et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)

Add to Collection

Review Engineering, Manufacturing

State-of-the-art of surface integrity in machining of metal matrix composites

Zhirong Liao et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2019)

Add to Collection

Article Engineering, Industrial

Machining of particulate-reinforced metal matrix composites: An investigation into the chip formation and subsurface damage

Qi Wu et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Formation of a self-lubricating layer by oxidation and solid-state amorphization of nano-lamellar microstructures during dry sliding wear tests

Cun-hong Yin et al.

ACTA MATERIALIA (2019)

Add to Collection

Review Engineering, Manufacturing

Material embrittlement in high strain-rate loading

Xiuxuan Yang et al.

INTERNATIONAL JOURNAL OF EXTREME MANUFACTURING (2019)

Add to Collection

Review Engineering, Manufacturing

The 'skin effect' of subsurface damage distribution in materials subjected to high-speed machining

Bi Zhang et al.

INTERNATIONAL JOURNAL OF EXTREME MANUFACTURING (2019)

Add to Collection

Article Mechanics

Comparison of cutting mechanism when machining micro and nano-particles reinforced SiC/Al metal matrix composites

Xiangyu Teng et al.

COMPOSITE STRUCTURES (2018)

Add to Collection

Article Automation & Control Systems

Investigation of cutting forces, surface integrity, and tool wear when high-speed milling of high-volume fraction SiCp/Al6063 composites in PCD tooling

Junfeng Xiang et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)

Add to Collection

Article Engineering, Multidisciplinary

Materials removal mechanism in high-speed grinding of particulate reinforced titanium matrix composites

Chaojie Liu et al.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Behaviour of Al6061-T6 alloy at different temperatures and strain-rates: Experimental characterization and material modelling

M. Scapin et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

Add to Collection

Proceedings Paper Engineering, Mechanical

High Rate Response and Dynamic Failure of Aluminosilicate Glass under Compression Loading

Sheikh Muhammad Zakir et al.

ECF22 - LOADING AND ENVIRONMENTAL EFFECTS ON STRUCTURAL INTEGRITY (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Dynamic recrystallization in nanocrystalline AZ31 Mg-alloy

W. Zhang et al.

VACUUM (2017)

Add to Collection

Article Engineering, Industrial

Abrasive machining of advanced aerospace alloys and composites

Fritz Klocke et al.

CIRP ANNALS-MANUFACTURING TECHNOLOGY (2015)

Add to Collection

Article Engineering, Manufacturing

Material removal behavior in ultrasonic-assisted scratching of SiC ceramics with a single diamond tool

Jianguo Cao et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2014)

Add to Collection

Review Materials Science, Multidisciplinary

Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions

Taku Sakai et al.

PROGRESS IN MATERIALS SCIENCE (2014)

Add to Collection

Article Engineering, Mechanical

On adiabatic shear localized fracture during serrated chip evolution in high speed machining of hardened AISI 1045 steel

Gu Liyao et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Ultrastrong Mg Alloy via Nano-spaced Stacking Faults

W. W. Jian et al.

MATERIALS RESEARCH LETTERS (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Quantitative study of grain refinement in Al-Mg alloy processed by equal channel angular pressing at cryogenic temperature

Y. J. Chen et al.

MATERIALS LETTERS (2011)

Add to Collection

Article Engineering, Industrial

Grinding characteristics in high speed grinding of engineering ceramics with brazed diamond wheels

Jianyi Chen et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2010)

Add to Collection

Article Nanoscience & Nanotechnology

Modeling of continuous dynamic recrystallization in commercial-purity aluminum

Hakan Hallberg et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)

Add to Collection

Article Engineering, Manufacturing

Machining of metal matrix composites: Effect of ceramic particles on residual stress, surface roughness and chip formation

A. Pramanik et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2008)

Add to Collection

Article Engineering, Industrial

Experimental study of surface integrity during end milling of Al/SiC particulate metal-matrix composites

N. Suresh Kumar Reddy et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)

Add to Collection

Article Engineering, Manufacturing

An FEM investigation into the behavior of metal matrix composites: Tool-particle interaction during orthogonal cutting

A. Pramanik et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2007)

Add to Collection

Article Engineering, Manufacturing

Surface characteristics of machined aluminium metal matrix composites

S. Kannan et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2006)

Add to Collection

Article Materials Science, Composites

Tensile and fatigue properties of the AA6061/20 vol.% Al2O3p and AA7005/10 vol.% Al2O3p composites

L Ceschini et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2006)

Add to Collection

Article Engineering, Industrial

A study on machinability of Al/SiC-MMC

A Manna et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2003)

Add to Collection

Article Engineering, Industrial

Design of optimisation of cutting parameters for turning metal matrix composites based on the orthogonal arrays

JP Davim

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2003)

Add to Collection

Article Engineering, Industrial

Simulation and experimental analysis of super high-speed grinding of ductile material

J Shimizu et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2002)

Add to Collection

Article Engineering, Mechanical

A simple model for dislocation behavior, strain and strain rate hardening evolution in deforming aluminum alloys

F Barlat et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2002)

Add to Collection

Article Engineering, Manufacturing

A comparison between conventional abrasives and superabrasives in grinding of SiC-aluminium composites

A Di Ilio et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.