Related references
Note: Only part of the references are listed.Tension-tension fatigue behavior of hybrid glass/carbon and carbon/carbon composites
Filipe Ribeiro et al.
INTERNATIONAL JOURNAL OF FATIGUE (2021)
Comparison of progressive damage simulation of 3D woven composites between voxel and conformal discretization models
Tao Zheng et al.
MECHANICS OF MATERIALS (2021)
Carbon/glass hybrid composite laminates in vinylester resin: Bending and low velocity impact tests
I Papa et al.
COMPOSITE STRUCTURES (2020)
Investigation of the mechanical performance of carbon/polypropylene 2D and 3D woven composites manufactured through multi-step impregnation processes
Vijay Goud et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)
Response of 3D woven composites under low velocity impact with different impactor geometries
Behzad Kazemianfar et al.
AEROSPACE SCIENCE AND TECHNOLOGY (2020)
Improved crush energy absorption in 3D woven composites by pick density modification
Geoffrey Neale et al.
COMPOSITES PART B-ENGINEERING (2020)
Low-velocity impact performance of hybrid 3D carbon/glass woven orthogonal composite: Experiment and simulation
Zhenyu Wu et al.
COMPOSITES PART B-ENGINEERING (2020)
Hybridization effect on the impact properties of flax composites
M. P. Silva et al.
1ST VIRTUAL EUROPEAN CONFERENCE ON FRACTURE - VECF1 (2020)
The effect of the through-thickness yarn component on the in- and out-of-plane properties of composites from 3D orthogonal woven preforms
Mohamad Midani et al.
JOURNAL OF THE TEXTILE INSTITUTE (2019)
Impact resistance and damage tolerance of fiber reinforced composites
S. Z. H. Shah et al.
COMPOSITE STRUCTURES (2019)
Impact on carbon fiber composite: Ballistic tests, material tests, and computer simulations
Sidney Chocron et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2019)
Compression after multiple low velocity impacts of NCF, 2D and 3D woven composites
Mohamed Nasr Saleh et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)
Improvement of the mode I interlaminar fracture toughness of carbon fiber; composite reinforced with electrospun nylon nanofiber
Mohannad T. Aljarrah et al.
COMPOSITES PART B-ENGINEERING (2019)
Impact behaviour of hybrid composites for structural applications: A review
Syafiqah Nur Azrie Safri et al.
COMPOSITES PART B-ENGINEERING (2018)
Improvement of Mode I Interlaminar Fracture Toughness of Stitched Glass/Epoxy Composites
D. Goektas et al.
APPLIED COMPOSITE MATERIALS (2017)
Mechanisms and characterization of impact damage in 2D and 3D woven fiber-reinforced composites
Kevin R. Hart et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)
Investigation of the Z-binder role in progressive damage of 3D woven composites
Nestor Castaneda et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)
Investigation on energy absorption efficiency of each layer in ballistic armour panel for applications in hybrid design
Yanfei Yang et al.
COMPOSITE STRUCTURES (2017)
Experimental characterisation of fatigue damage in single Z-pins
F. Warzok et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Experimental determination of the mode I delamination fracture and fatigue properties of thin 3D woven composites
G. Stegschuster et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Ballistic performance of hybrid 3D woven composites: Experiments and simulations
R. Munoz et al.
COMPOSITE STRUCTURES (2015)
3D composite reinforcement meso FE analyses based on X-ray computed tomography
N. Naouar et al.
COMPOSITE STRUCTURES (2015)
Mode I and Mode II interlaminar fracture toughness of composite laminates interleaved with electrospun nanofibre veils
Gareth W. Beckermann et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)
The effect of hybridization on the ballistic impact behavior of hybrid composite armors
Aswani Kumar Bandaru et al.
COMPOSITES PART B-ENGINEERING (2015)
Mechanisms of in-plane shear deformation in hybrid three-dimensional woven composites
R. Munoz et al.
JOURNAL OF COMPOSITE MATERIALS (2015)
Inclusion of a thermoplastic phase to improve impact and post-impact performances of carbon fibre reinforced thermosetting composites - A review
N. H. Nash et al.
MATERIALS & DESIGN (2015)
Mechanical modelling of 3D woven composites considering realistic unit cell geometry
S. D. Green et al.
COMPOSITE STRUCTURES (2014)
Fibre hybridisation in polymer composites: A review
Yentl Swolfs et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2014)
Mechanical behavior and failure micromechanisms of hybrid 3D woven composites in tension
R. Munoz et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2014)
Interlaminar toughening of resin transfer moulded glass fibre epoxy laminates by polycaprolactone electrospun nanofibres
Sam van der Heijden et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2014)
X-ray microtomography analysis of the damage micromechanisms in 3D woven composites under low-velocity impact
R. Seltzer et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2013)
Effect of stitch density and stitch thread thickness on damage progression and failure characteristics of stitched composites under out-of-plane loading
K. T. Tan et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2013)
Drop-weight impact response of hybrid composites impacted by impactor of various geometries
Ercan Sevkat et al.
MATERIALS & DESIGN (2013)
Influence of Fibre Architecture on Impact Damage Tolerance in 3D Woven Composites
P. Potluri et al.
APPLIED COMPOSITE MATERIALS (2012)
The damage resistance of quasi-isotropic carbon/epoxy composite tape laminates impacted by high velocity ice
Jennifer Rhymer et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2012)
Low velocity impact modeling in composite laminates capturing permanent indentation
C. Bouvet et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2012)
A progressive failure model for mesh-size-independent FE analysis of composite laminates subject to low-velocity impact damage
L. Raimondo et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2012)
Effects of ply clustering in laminated composite plates under low-velocity impact loading
E. V. Gonzalez et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2011)
Shear tests of carbon fiber plates bonded to concrete with control of snap-back
Pietro Carrara et al.
ENGINEERING FRACTURE MECHANICS (2011)
Finite element modeling of impact, damage evolution and penetration of thick-section composites
Bazle A. Gama et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2011)
Micromechanisms of deformation and fracture of polypropylene nonwoven fabrics
Alvaro Ridruejo et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2011)
Effect of Glass Fiber Hybridization on the Behavior Under Impact of Woven Carbon Fiber/Epoxy Laminates
A. Enfedaque et al.
JOURNAL OF COMPOSITE MATERIALS (2010)
Low-velocity impact damage on dispersed stacking sequence laminates. Part I: Experiments
C. S. Lopes et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2009)
A continuum damage model for composite laminates:: Part II -: Computational implementation and validation
P. Maimi et al.
MECHANICS OF MATERIALS (2007)
Review of z-pinned composite laminates
A. P. Mouritz
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)
Failure criteria for FRP laminates
CG Davila et al.
JOURNAL OF COMPOSITE MATERIALS (2005)
Mechanisms of crack bridging by composite and metallic rods
DDR Cartie et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2004)
3D-weaving: Theory and practice
N Khokar
JOURNAL OF THE TEXTILE INSTITUTE (2001)
Share Paper
