☆ 4.7 Article

Stable Sn@Cu foam enables long cycling life of zinc metal anode for aqueous zinc batteries

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2022)

Related references

Note: Only part of the references are listed.

Article Chemistry, Multidisciplinary

Sn Alloying to Inhibit Hydrogen Evolution of Zn Metal Anode in Rechargeable Aqueous Batteries

Luyao Wang et al.

Summary: Alloying with Sn is an effective strategy to inhibit hydrogen evolution and dendrite growth of Zn metal anodes in rechargeable aqueous batteries. In-situ monitoring shows that Sn alloy electrodes have significantly lower hydrogen evolution compared to pure Zn electrodes, while also providing favorable Zn nucleation sites for more uniform Zn deposition. The Zn-Sn alloy electrodes demonstrate improved cycling performance in terms of plating/stripping cycles and depth of discharge, making them a practical solution for stabilizing Zn metal electrodes in rechargeable aqueous batteries.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Dendrite-free and anti-corrosion Zn metal anode enabled by an artificial layer for high-performance Zn ion capacitor

Zhuo Li et al.

Summary: In this paper, an artificial Sn inorganic layer was constructed on the Zn metal anode through a facile atom exchange strategy. The Sn layer effectively suppressed Zn dendrite growth, improved Coulombic efficiency, and reduced corrosion, leading to enhanced performance of Zn-based energy storage devices.

CHINESE CHEMICAL LETTERS (2022)

Add to Collection

Article Energy & Fuels

Electrospun conductive carbon nanofiber hosts for stable zinc metal anode

Sang Ha Baek et al.

Summary: Rechargeable zinc metal batteries (RZMBs) are considered promising candidates to replace lithium-ion batteries due to their low cost, safety, and stability. Deposition of zinc on carbon nanofiber can reduce plating/stripping overpotential, and pairing with β-MnO2 can enhance the capacity of RZMB.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2022)

Add to Collection

Article Engineering, Environmental

Rationally designed In@Zn@In trilayer structure on 3D porous Cu towards high-performance Zn-Ion batteries

Xiao-Yong Fan et al.

Summary: In this study, a three-dimensional (3D) porous Cu framework with a unique In@Zn@In trilayer structure grown on it was designed and developed for high-performance ZIBs. The sandwich-like In@Zn@In trilayer structure inhibits dendrite growth and side reactions of Zn anode, and the 3D porous architecture allows for rapid electrolyte penetration and sufficient electron/ion transport channels.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Energy & Fuels

S-doped 3D porous carbons derived from potassium thioacetate activation strategy for zinc-ion hybrid supercapacitor applications

Dewei Wang et al.

Summary: The use of potassium thioacetate activation technique to produce S-doped 3D porous carbons (S-3DPCs) for ZHSCs cathodes shows excellent electrochemical performance, with a large specific surface area and a certain amount of sulfur, indicating significant potential for applications.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Anion Texturing Towards Dendrite-Free Zn Anode for Aqueous Rechargeable Batteries

Du Yuan et al.

Summary: Texturing zinc has been demonstrated as an effective approach to address the issue of zinc dendrite formation, showing highly reversible stripping/plating at high current density without dendrite characteristics. The development of anion-induced zinc texturing provides a pathway to explore zinc chemistry and advance aqueous rechargeable batteries.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Add to Collection

Article Engineering, Environmental

A hierarchical porous tin host for dendrite-free, highly reversible zinc anodes

Qinping Jian et al.

Summary: A hierarchical porous framework was developed as a host for Zn anode, addressing issues such as dendrite formation and side reactions during cycling. Experimental and numerical results confirmed that the newly developed host enhances Zn deposition efficiency and cycling stability, outperforming traditional Cu mesh hosts in terms of Coulombic efficiency and cycle life.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Chemistry, Physical

Unveiling the Origin of Alloy-Seeded and Nondendritic Growth of Zn for Rechargeable Aqueous Zn Batteries

Yamin Zhang et al.

Summary: Rechargeable aqueous zinc anodes are attracting attention for their safety, low cost, and high theoretical volumetric capacity. Zinc anodes in aqueous electrolytes often suffer from dendritic metal deposition, with the regulation of Zn using Zn-alloying metals as a reported solution. By introducing Ag on Zn anodes, uniform Zn deposition was achieved, leading to improved cycling performance. This alloy-seeding design principle could potentially enhance the rechargeability of other metal anodes.

ACS ENERGY LETTERS (2021)

Add to Collection

Article Chemistry, Physical

Calendar Life of Zn Batteries Based on Zn Anode with Zn Powder/Current Collector Structure

Qing Li et al.

Summary: The study highlights the practical issues that may arise when using Zn foil for studying the stability and dendrite formation behavior of Zn anodes, suggesting that a Zn powder/current collector configuration is more practical. The research also reveals that during the aging process of the Zn-P@Cu electrode, hydrogen forms on the surface of Cu and the Zn-P dissolves, leading to morphological changes, which are attributed to galvanic corrosion between Cu and Zn.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Review Chemistry, Physical

Electrolyte Strategies toward Better Zinc-Ion Batteries

Cunxin Liu et al.

Summary: With the increasing demand for large-scale energy storage, high safety and low cost rechargeable zinc-ion batteries are considered as potential substitutes for lithium-ion batteries. However, fundamental issues hinder the development of zinc-based energy storage systems. The electrolyte plays a crucial role in ensuring the compatibility and cycling of battery components, and strategies to address issues such as cathode dissolution, zinc dendrites, corrosion, and hydrogen evolution are discussed.

ACS ENERGY LETTERS (2021)

Add to Collection

Article Chemistry, Physical

Strategies towards the challenges of zinc metal anode in rechargeable aqueous zinc ion batteries

Jiawei Wang et al.

Summary: The research summarized above categorizes and reviews strategies to address challenges related to zinc metal anodes for rechargeable aqueous zinc ion batteries. By focusing on electrochemical and chemical reaction principles, the study aims to provide insights into improving the performance of these batteries and explores prospects for the development of zinc metal anodes.

ENERGY STORAGE MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Toward Planar and Dendrite-Free Zn Electrodepositions by Regulating Sn-Crystal Textured Surface

Shiying Li et al.

Summary: The research investigates the influence of surface structure on the nucleation and deposition of Zn by reconstructing the surface structure of a Zn-metal anode with Sn crystal textures. The high-affinity Zn binding sites of Sn and the high surface energy ensure better wettability from the deposits and promote the lateral growth of Zn crystals, leading to improved stability and cycling performance of the Zn-metal anode.

ADVANCED MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Reversible zinc-based anodes enabled by zincophilic antimony engineered MXene for stable and dendrite-free aqueous zinc batteries

Yuan Tian et al.

Summary: By designing and growing multifunctional uniform antimony nanoarrays on Ti3C2Tx MXene paper, this study demonstrates the feasibility of antimony as an alloying-type Zn storage anode and provides an effective approach to suppress Zn dendrites.

ENERGY STORAGE MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Amine-Functionalized Carbon Cloth Host for Dendrite-Free Zn Metal Anodes

Yao Li et al.

Summary: In this study, an amine-functionalized carbon cloth was used as the host to prepare a dendrite-free Zn anode, which showed stable performance and longer cycling life compared to conventional Zn anodes. The results indicate that the amine functionalization improves the binding energy between Zn atoms and CC, leading to enhanced conductivity and dendrite suppression.

ACS APPLIED ENERGY MATERIALS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Tuning Surface Energy of Zn Anodes via Sn Heteroatom Doping Enabled by a Codeposition for Ultralong Life Span Dendrite-Free Aqueous Zn-Ion Batteries

Zenghua Liu et al.

Summary: By tuning the surface energy of the Zn anode through in situ doping of Sn heteroatoms, the growth of Zn dendrites has been effectively inhibited, leading to a dendrite-free Zn anode.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Chemistry, Physical

Constructing nano-channeled tin layer on metal zinc for high-performance zinc-ion batteries anode

Zhenyu Miao et al.

Summary: Rechargeable aqueous zinc-ion batteries have been studied extensively due to the unique properties of zinc. The tin-modified zinc anode, Sn-Zn, was developed to address dendrite formation and side reactions, improving battery performance. Multiscale investigation techniques, including micro-CT, were used to study zinc dendrite inhibition and the induction mechanism of zinc by tin.

ECOMAT (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Challenges and strategies of zinc anode for aqueous zinc-ion batteries

Weixin He et al.

Summary: This article analyzes the problems with zinc anodes in AZIBs and summarizes recent improvement strategies from four aspects, including construction of composite materials, modification of the anode-electrolyte interface, design of electrolyte, and design of separator. Five suggestions for researchers on investigating the orientation of zinc anodes are proposed.

MATERIALS CHEMISTRY FRONTIERS (2021)

Add to Collection

Review Chemistry, Physical

Recent progress in aqueous zinc-ion batteries: a deep insight into zinc metal anodes

Tian Chen Li et al.

Summary: Aqueous zinc ion batteries have attracted significant research interest due to their environmental benefits and exceptional performance. However, potential issues with the zinc anode, such as dendrite growth and corrosion, must be addressed in order to prolong lifespan and commercialize the technology.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection

Review Chemistry, Physical

The strategies of boosting the performance of highly reversible zinc anodes in zinc-ion batteries: recent progress and future perspectives

Chenghan Zhao et al.

Summary: Rechargeable zinc-metal batteries have attracted attention as a potential substitute for lithium-ion batteries due to their low cost, large volumetric capacity, and safe aqueous electrolyte use. However, issues such as poor cycling durability and low coulombic efficiency of zinc anodes have hindered further development, with research focusing on addressing dendrite growth, surface passivation, and hydrogen evolution during plating/stripping processes.

SUSTAINABLE ENERGY & FUELS (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Interfacial Design of Dendrite-Free Zinc Anodes for Aqueous Zinc-Ion Batteries

Qi Zhang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Novel 3D Nanoporous Zn-Cu Alloy as Long-Life Anode toward High-Voltage Double Electrolyte Aqueous Zinc-Ion Batteries

Botian Liu et al.

SMALL (2020)

Add to Collection

Review Chemistry, Physical

Recent advances in zinc anodes for high-performance aqueous Zn-ion batteries

Hao Jia et al.

NANO ENERGY (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Progress in Stability of Organic Solar Cells

Duan Leiping et al.

ADVANCED SCIENCE (2020)

Add to Collection

Article Chemistry, Multidisciplinary

An In-Depth Study of Zn Metal Surface Chemistry for Advanced Aqueous Zn-Ion Batteries

Junnan Hao et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

An Interface-Bridged Organic-Inorganic Layer that Suppresses Dendrite Formation and Side Reactions for Ultra-Long-Life Aqueous Zinc Metal Anodes

Yanhui Cui et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Add to Collection

Review Green & Sustainable Science & Technology

Challenges and Strategies for Constructing Highly Reversible Zinc Anodes in Aqueous Zinc-Ion Batteries: Recent Progress and Future Perspectives

Yanxia Yu et al.

ADVANCED SUSTAINABLE SYSTEMS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

A Corrosion-Resistant and Dendrite-Free Zinc Metal Anode in Aqueous Systems

Daliang Han et al.

SMALL (2020)

Add to Collection

Review Chemistry, Physical

Strategies for Dendrite-Free Anode in Aqueous Rechargeable Zinc Ion Batteries

Ziyi Cao et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Multidisciplinary Sciences

Enhanced carbon dioxide conversion at ambient conditions via a pore enrichment effect

Wei Zhou et al.

NATURE COMMUNICATIONS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Manipulating the ion-transfer kinetics and interface stability for high-performance zinc metal anodes

Xuesong Xie et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

Add to Collection

Article Multidisciplinary Sciences

Exceptionally active iridium evolved from a pseudo-cubic perovskite for oxygen evolution in acid

Yubo Chen et al.

NATURE COMMUNICATIONS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Dendrite-Free Zinc Deposition Induced by Multifunctional CNT Frameworks for Stable Flexible Zn-Ion Batteries

Yinxiang Zeng et al.

ADVANCED MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Low cost and efficient alloy electrocatalysts for CO2 reduction to formate

Shahid Rasul et al.

JOURNAL OF CO2 UTILIZATION (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Homogeneous Deposition of Zinc on Three-Dimensional Porous Copper Foam as a Superior Zinc Metal Anode

Xiaodong Shi et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)

Add to Collection

Article Chemistry, Physical

High-performance flexible quasi-solid-state zinc-ion batteries with layer-expanded vanadium oxide cathode and zinc/stainless steel mesh composite anode

Jin Zhao et al.

NANO ENERGY (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Lignin@Nafion Membranes Forming Zn Solid-Electrolyte Interfaces Enhance the Cycle Life for Rechargeable Zinc-Ion Batteries

Du Yuan et al.

CHEMSUSCHEM (2019)

Add to Collection

Article Multidisciplinary Sciences

Impact of transport electrification on critical metal sustainability with a focus on the heavy-duty segment

Han Hao et al.

NATURE COMMUNICATIONS (2019)

Add to Collection

Article Multidisciplinary Sciences

Photoinduced semiconductor-metal transition in ultrathin troilite FeS nanosheets to trigger efficient hydrogen evolution

Gang Zhou et al.

NATURE COMMUNICATIONS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

3D Porous Copper Skeleton Supported Zinc Anode toward High Capacity and Long Cycle Life Zinc Ion Batteries

Zhuang Kang et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Long-life and deeply rechargeable aqueous Zn anodes enabled by a multifunctional brightener-inspired interphase

Zhiming Zhao et al.

ENERGY & ENVIRONMENTAL SCIENCE (2019)

Add to Collection

Article Multidisciplinary Sciences

Predictive modeling of battery degradation and greenhouse gas emissions from US state-level electric vehicle operation

Fan Yang et al.

NATURE COMMUNICATIONS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

3D zinc@carbon fiber composite framework anode for aqueous Zn-MnO2 batteries

Wei Dong et al.

RSC ADVANCES (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Ultrathin Surface Coating Enables Stabilized Zinc Metal Anode

Kangning Zhao et al.

ADVANCED MATERIALS INTERFACES (2018)

Add to Collection

Article Microbiology

Microbial activity response to hydrogen injection in thermophilic anaerobic digesters revealed by genome-centric metatranscriptomics

Alessandra Fontana et al.

MICROBIOME (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Towards High-Safe Lithium Metal Anodes: Suppressing Lithium Dendrites via Tuning Surface Energy

Dong Wang et al.

ADVANCED SCIENCE (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Nanoscale Nucleation and Growth of Electrodeposited Lithium Metal

Allen Pei et al.

NANO LETTERS (2017)

Add to Collection

Article Chemistry, Physical

Superior performance of ZnCo2O4/ZnO@multiwall carbon nanotubes with laminated shape assembled as highly practical all-solid-state asymmetric supercapacitors

Jinkun Sun et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Add to Collection

Article Electrochemistry

Conductive graphite fiber as a stable host for zinc metal anodes

Li-Ping Wang et al.

ELECTROCHIMICA ACTA (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Cation-Deficient Spinel ZnMn2O4 Cathode in Zn(CF3SO3)2 Electrolyte for Rechargeable Aqueous Zn-Ion Battery

Ning Zhang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)

Add to Collection

Article Materials Science, Multidisciplinary

LEED and photoemission study of growth and structural evolution of Sn on Ag(001)

Suvankar Chakraborty et al.

VACUUM (2016)

Add to Collection

Review Chemistry, Multidisciplinary

Design of electrocatalysts for oxygen- and hydrogen-involving energy conversion reactions

Yan Jiao et al.

CHEMICAL SOCIETY REVIEWS (2015)

Add to Collection

Article Multidisciplinary Sciences

Accommodating lithium into 3D current collectors with a submicron skeleton towards long-life lithium metal anodes

Chun-Peng Yang et al.

NATURE COMMUNICATIONS (2015)

Add to Collection

© Peeref 2019-2024. All rights reserved.