Related references
Note: Only part of the references are listed.Investigation on the Thermal Deformation Behavior of the Nickel-Based Superalloy Strengthened by γ′ Phase
Haiping Wang et al.
CRYSTALS (2019)
Constitutive Models for the Prediction of the Hot Deformation Behavior of the 10%Cr Steel Alloy
Abdallah Shokry et al.
MATERIALS (2019)
Hot Deformation Characteristics-Constitutive Equation and Processing Maps-of 21-4N Heat-Resistant Steel
Yiming Li et al.
MATERIALS (2019)
Hot Deformation Behavior of Four Steels: A Comparative Study
C. Menapace et al.
JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME (2018)
Prediction of Ac3 and Martensite Start Temperatures by a Data-driven Model Selection Approach
Hoheok Kim et al.
ISIJ INTERNATIONAL (2017)
Effect of Aluminum Alloying on the Hot Deformation Behavior of Nano-bainite Bearing Steel
Z. N. Yang et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2017)
Deformation-mechanism-based modeling of creep behavior of modified 9Cr-lMo steel
X. Z. Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
A Modified Johnson-Cook Model for Hot Deformation Behavior of 35CrMo Steel
Sanxing Wang et al.
METALS (2017)
Critical Condition of Dynamic Recrystallization in 35CrMo Steel
Yuanchun Huang et al.
METALS (2017)
Constitutive Equation and Hot Compression Deformation Behavior of Homogenized Al-7.5Zn-1.5Mg-0.2Cu-0.2Zr Alloy
Jianliang He et al.
MATERIALS (2017)
Constitutive Relations for Ti-6A1-4V Hot Working
Jyoti S. Jha et al.
PLASTICITY AND IMPACT MECHANICS (2017)
High Temperature Deformation Behavior of P92 Steel
Sultan Alsagabi
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2016)
Hot deformation behavior of Zr-2.5Nb alloy: A comparative study using different materials models
K. K. Saxena et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Creep deformation and rupture behaviour of thermal aged P92 steel
T. Sakthivel et al.
MATERIALS AT HIGH TEMPERATURES (2016)
Creep strength breakdown and microstructure evolution in a 3%Co modified P92 steel
A. Fedoseeva et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Constitutive Model Based on Dynamic Recrystallization Behavior during Thermal Deformation of a Nickel-Based Superalloy
Peng Zhang et al.
METALS (2016)
Investigation on Hot Deformation Behavior and Hot Processing Map of BSTMUF601 Super-Alloy
Chaoyang Sun et al.
METALS (2016)
Study on constitutivemodeling and processingmaps for hot deformation of medium carbon Cr-Ni-Mo alloyed steel
Chi Zhang et al.
MATERIALS & DESIGN (2016)
A physically-based constitutive model for a nitrogen alloyed ultralow carbon stainless steel
An He et al.
COMPUTATIONAL MATERIALS SCIENCE (2015)
Correction of flow stress and determination of constitutive constants for hot working of API X100 pipeline steel
Ling-Yun Qian et al.
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2015)
Warm deformation processing maps for the plain eutectoid steels
H. Rastegari et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Study on hot deformation behaviour and processing maps of low carbon bainitic steel
Zhinan Yang et al.
MATERIALS & DESIGN (2015)
Hot deformation behavior and processing map of a 9Cr ferritic/martensitic ODS steel
Guangming Zhang et al.
JOURNAL OF NUCLEAR MATERIALS (2014)
Constitutive model for AZ31 magnesium alloy based on isothermal compression test
J. Luan et al.
MATERIALS SCIENCE AND TECHNOLOGY (2014)
Hot deformation and processing map of a typical Al-Zn-Mg-Cu alloy
Y. C. Lin et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2013)
Constitutive modeling for flow behavior of GCr15 steel under hot compression experiments
Fei Yin et al.
MATERIALS & DESIGN (2013)
A comparative study on Johnson-Cook, modified Johnson-Cook and Arrhenius-type constitutive models to predict the high temperature flow stress in 20CrMo alloy steel
An He et al.
MATERIALS & DESIGN (2013)
Microstructures and mechanical properties of creep resistant steel for application at elevated temperatures
Lj Milovic et al.
MATERIALS & DESIGN (2013)
Constitutive analysis of the hot deformation behavior of Fe-23Mn-2Al-0.2C twinning induced plasticity steel in consideration of strain
Jingqi Zhang et al.
MATERIALS & DESIGN (2013)
Prediction of flow stress for N08028 alloy under hot working conditions
L. Wang et al.
MATERIALS & DESIGN (2013)
Welding and weldability of candidate ferritic alloys for future advanced ultrasupercritical fossil power plants
S. A. David et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2013)
Creep Deformation and Rupture Behaviour of P92 Steel at 923 K
E. Isaac Samuel et al.
6TH INTERNATIONAL CONFERENCE ON CREEP, FATIGUE AND CREEP-FATIGUE INTERACTION (2013)
A comparative study on Arrhenius-type constitutive equations and artificial neural network model to predict high-temperature deformation behaviour in 12Cr3WV steel
X. Xiao et al.
COMPUTATIONAL MATERIALS SCIENCE (2012)
Effect of Silicon and Aluminium on Austenite Static Recrystallization Kinetics in High-strength TRIP-aided Steels
Pasi Pekka Suikkanen et al.
ISIJ INTERNATIONAL (2012)
Microstructural evolution of delta ferrite in SAVE12 steel under heat treatment and short-term creep
Shengzhi Li et al.
MATERIALS CHARACTERIZATION (2012)
Identification for the optimal working parameters of as-extruded 42CrMo high-strength steel from a large range of strain, strain rate and temperature
Guo-zheng Quan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Constitutive relationships for hot deformation of austenite
Hamed Mirzadeh et al.
ACTA MATERIALIA (2011)
High temperature workability behaviour of a modified P92 steel
Manuel Carsi et al.
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH (2011)
Hot Deformation Behavior of P92 Steel Used for Ultra-Super-Critical Power Plants
Ru-xing SHI et al.
JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2011)
Determination of creep and damage properties for P92 at 675 degrees C
M. Saber et al.
JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN (2011)
Characterization of deformation instability in modified 9Cr-1Mo steel during thermo-mechanical processing
Dipti Samantaray et al.
MATERIALS & DESIGN (2011)
A critical review of experimental results and constitutive descriptions for metals and alloys in hot working
Y. C. Lin et al.
MATERIALS & DESIGN (2011)
Optimization of hot working parameters for thermo-mechanical processing of modified 9Cr-1Mo (P91) steel employing dynamic materials model
Dipti Samantaray et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Hot deformation behavior of a medium carbon microalloyed steel
H. Mirzadeh et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Constitutive analysis to predict high-temperature flow stress in modified 9Cr-1Mo (P91) steel
Dipti Samantaray et al.
MATERIALS & DESIGN (2010)
Characterization of hot deformation behavior of 410 martensitic stainless steel using constitutive equations and processing maps
A. Momeni et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Simulation of 42CrMo steel billet upsetting and its defects analyses during forming process based on the software DEFORM-3D
Z. J. Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
Modeling of flow stress of 42CrMo steel under hot compression
Yong-Cheng Lin et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
Numerical simulation for stress/strain distribution and microstructural evolution in 42CrMo steel during hot upsetting process
Y. C. Lin et al.
COMPUTATIONAL MATERIALS SCIENCE (2008)
3D FEM simulation of the multi-stage forging process of a gas turbine compressor blade
Cheng Lv et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)
Processing maps of Ti662 unreinforced and reinforced with TiC particles according to dynamic models
C. Poletti et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Study on hot deformation behavior of 12%Cr ultra-super-critical rotor steel
Baozhong Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Phase evolution in P92 and E911 weld metals during ageing
A. Vyrostkova et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Weld metal microstructure analysis of 9-12% Cr steels
J. Onoro
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2006)
A comparative analysis of training methods for artificial neural network rainfall-runoff models
S Srinivasulu et al.
APPLIED SOFT COMPUTING (2006)
Grain size effect on the warm deformation behaviour of a Ti-IF steel
A Oudin et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Issues in replacing Cr-Mo steels and stainless steels with 9Cr-1Mo-V steel
RW Swindeman et al.
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2004)
Constitutive analysis in hot working
HJ McQueen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2002)
Creep crack growth behavior in the HAZ of weldments of W containing high Cr steel
M Tabuchi et al.
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2001)
Share Paper
