Related references
Note: Only part of the references are listed.Nondestructive Reverberation Chamber Measurement of Microwave Oven Total Radiated Power and Shielding Effectiveness
Angelo Gifuni et al.
IEEE TRANSACTIONS ON ELECTROMAGNETIC COMPATIBILITY (2021)
A Unified Approach for Uncertainty Analyses for Total Radiated Power and Total Isotropic Sensitivity Measurements in Reverberation Chamber
Wei Xue et al.
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2021)
Guidelines for Limiting Exposure to Electromagnetic Fields (100 kHz to 300 GHz)
HEALTH PHYSICS (2020)
On the Estimated Measurement Uncertainty of the Insertion Loss in a Reverberation Chamber Including Frequency Stirring
Angelo Gifunyliopistoi et al.
IEEE TRANSACTIONS ON ELECTROMAGNETIC COMPATIBILITY (2019)
Review of Uncertainty Quantification of Measurement and Computational Modeling in EMC Part I: Measurement Uncertainty
Carlo F. M. Carobbi et al.
IEEE TRANSACTIONS ON ELECTROMAGNETIC COMPATIBILITY (2019)
Over-the-Air Evaluation of the Antenna Performance of Popular Mobile Phones
Stanislav Stefanov Zhekov et al.
IEEE ACCESS (2019)
Base-Case Model for Measurement Uncertainty in a Reverberation Chamber Including Frequency Stirring
Angelo Gifuni et al.
IEEE TRANSACTIONS ON ELECTROMAGNETIC COMPATIBILITY (2018)
Estimating and Correcting the Device-Under-Test Transfer Function in Loaded Reverberation Chambers for Over-the-Air Tests
Kate A. Remley et al.
IEEE TRANSACTIONS ON ELECTROMAGNETIC COMPATIBILITY (2017)
Configuring and Verifying Reverberation Chambers for Testing Cellular Wireless Devices
Kate A. Remley et al.
IEEE TRANSACTIONS ON ELECTROMAGNETIC COMPATIBILITY (2016)
Effects of the Correction for Impedance Mismatch on the Measurement Uncertainty in a Reverberation Chamber
Angelo Gifuni
IEEE TRANSACTIONS ON ELECTROMAGNETIC COMPATIBILITY (2015)
Analysis of the Measurement Uncertainty of the Absorption Cross Section in a Reverberation Chamber
Angelo Gifuni et al.
IEEE TRANSACTIONS ON ELECTROMAGNETIC COMPATIBILITY (2015)
Design and Experimental Validation of a Mode-Stirred Reverberation Chamber at Millimeter Waves
Abdou Khadir Fall et al.
IEEE TRANSACTIONS ON ELECTROMAGNETIC COMPATIBILITY (2015)
Proximity-effect test for lossy wireless-device measurements in reverberation chambers
Joop Aan Den Toorn et al.
IET SCIENCE MEASUREMENT & TECHNOLOGY (2015)
Rapid and accurate broadband absorption cross-section measurement of human bodies in a reverberation chamber
Ian D. Flintoft et al.
MEASUREMENT SCIENCE AND TECHNOLOGY (2015)
Dosimetric Simulations of Brain Absorption of Mobile Phone Radiation-The Relationship Between psSAR and Age
Claudio Enrique Fernandez-Rodriguez et al.
IEEE ACCESS (2015)
MIMO Characterization on System Level of 5G Microbase Stations Subject to Randomness in LOS
Per-Simon Kildal et al.
IEEE ACCESS (2014)
Measurement and Performance of Textile Antenna Efficiency on a Human Body in a Reverberation Chamber
Stephen J. Boyes et al.
IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION (2013)
Uncertainty From Choice of Mode-Stirring Technique in Reverberation-Chamber Measurements
Kate A. Remley et al.
IEEE TRANSACTIONS ON ELECTROMAGNETIC COMPATIBILITY (2013)
Reverberation Chamber Techniques for Determining the Radiation and Total Efficiency of Antennas
Christopher L. Holloway et al.
IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION (2012)
Characterization of Reverberation Chambers for OTA Measurements of Wireless Devices: Physical Formulations of Channel Matrix and New Uncertainty Formula
Per-Simon Kildal et al.
IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION (2012)
OTA Testing in Multipath of Antennas and Wireless Devices With MIMO and OFDM
Per-Simon Kildal et al.
PROCEEDINGS OF THE IEEE (2012)
Threshold Receiver Model for Throughput of Wireless Devices With MIMO and Frequency Diversity Measured in Reverberation Chamber
Per-Simon Kildal et al.
IEEE ANTENNAS AND WIRELESS PROPAGATION LETTERS (2011)
Static and Dynamic Propagation-Channel Impairments in Reverberation Chambers
Kate A. Remley et al.
IEEE TRANSACTIONS ON ELECTROMAGNETIC COMPATIBILITY (2011)
An International Interlaboratory Comparison of Mobile Phone SAR Calculation With CAD-Based Models
Martin Siegbahn et al.
IEEE TRANSACTIONS ON ELECTROMAGNETIC COMPATIBILITY (2010)
Simulating the Multipath Channel With a Reverberation Chamber: Application to Bit Error Rate Measurements
Evgeni Genender et al.
IEEE TRANSACTIONS ON ELECTROMAGNETIC COMPATIBILITY (2010)
Channel Sounding of Loaded Reverberation Chamber for Over-the-Air Testing of Wireless Devices-A Coherence Bandwidth Versus Average Mode Bandwidth and Delay Spread
Xiaoming Chen et al.
IEEE ANTENNAS AND WIRELESS PROPAGATION LETTERS (2009)
On the Measurement of the Absorption Cross Section and Material Reflectivity in a Reverberation Chamber
Angelo Gifuni
IEEE TRANSACTIONS ON ELECTROMAGNETIC COMPATIBILITY (2009)
Characterization of GSM non-line-of-sight propagation channels generated in a reverberating chamber by using bit error rates
Giuseppe Ferrara et al.
IEEE TRANSACTIONS ON ELECTROMAGNETIC COMPATIBILITY (2007)
On the use of reverberation chambers to simulate a Rician radio environment for the testing of wireless devices
Christopher L. Holloway et al.
IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION (2006)
Comparisons of computed mobile phone induced SAR in the SAM phantom to that in anatomically correct models of the human head
Brian B. Beard et al.
IEEE TRANSACTIONS ON ELECTROMAGNETIC COMPATIBILITY (2006)
Requirements for an effective reverberation chamber: Unloaded or loaded
CL Holloway et al.
IEEE TRANSACTIONS ON ELECTROMAGNETIC COMPATIBILITY (2006)
Share Paper
