4.4 Article

Linear Mode Avalanche Photodiodes With Antimonide Multipliers on InP Substrates

Related references

Note: Only part of the references are listed.
Article Physics, Applied

Random alloy thick AlGaAsSb avalanche photodiodes on InP substrates

S. Lee et al.

Summary: In this study, low noise random alloy (RA) AlGaAsSb avalanche photodiodes (APDs) with nearly lattice-matched InP substrates were demonstrated. The RA AlGaAsSb material, grown at a low temperature, exhibited high quality and low impurity density. The APDs showed low dark current density and excess noise, making them suitable for commercial applications such as optical communication and LiDAR systems.

APPLIED PHYSICS LETTERS (2022)

Article Physics, Applied

Weibull-Frechet random path length model for avalanche gain and noise in photodiodes

Duu Sheng Ong et al.

Summary: A four-parameter Weibull-Frechet (WF) distribution function has been introduced in the random path length (RPL) model for nonlocal modelling of soft-threshold ionisation in semiconductors. The WF function has been demonstrated to be capable of reproducing the realistic probability distribution function (PDF) of electron and hole ionisation path lengths extracted from full band Monte Carlo (FBMC) transport simulations of bulk GaAs.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2022)

Article Engineering, Electrical & Electronic

Evolution of Low-Noise Avalanche Photodetectors

Joe C. Campbell

Summary: This paper reviews the materials and structural approaches that have been developed to reduce excess noise in avalanche photodiodes and increase the gain-bandwidth product.

IEEE JOURNAL OF SELECTED TOPICS IN QUANTUM ELECTRONICS (2022)

Article Engineering, Electrical & Electronic

Low Excess Noise of Al0.85Ga0.15As0.56Sb0.44 Avalanche Photodiode From Pure Electron Injection

Jonathan Taylor-Mew et al.

Summary: This study presents room temperature data of avalanche gain and excess noise factors of Al0.85Ga0.15As0.56Sb0.44 APDs, showing that pure electron injection results in the best excess noise performance. Other injection profiles with increased portion of injected holes worsen the excess noise performance, highlighting the importance of using pure electron injection.

IEEE PHOTONICS TECHNOLOGY LETTERS (2021)

Article Physics, Applied

Low noise Al0.85Ga0.15As0.56Sb0.44 avalanche photodiodes on InP substrates

S. Lee et al.

Summary: The study demonstrated Al0.85Ga0.15As0.56Sb0.44 avalanche photodiodes (APDs) with a thick 1000nm multiplication layer, showing low dark current densities and excess noise compared to previously reported APDs. The thick AlGaAsSb-based APDs have the potential to be high-performance multipliers, especially when used with available short-wavelength infrared (SWIR) absorption layers.

APPLIED PHYSICS LETTERS (2021)

Article Physics, Applied

AlInAsSb avalanche photodiodes on InP substrates

S. H. Kodati et al.

Summary: The report discusses the gain, noise, and dark current characteristics of Al0.79In0.21As0.74Sb0.26-based APDs on InP substrates and highlights the low excess noise and dark current, as well as the competitive performance compared to other materials. AlInAsSb is proposed as a candidate multiplication layer for avalanche photodiodes in visible to short-wavelength infrared applications.

APPLIED PHYSICS LETTERS (2021)

Review Engineering, Electrical & Electronic

A Review of Single-Photon Avalanche Diode Time-of-Flight Imaging Sensor Arrays

Francois Piron et al.

Summary: This paper presents the technical evolution of SPAD ToF 3D imaging sensors, from early SPAD imagers to state-of-the-art prototypes. The existing methods, options, advantages, drawbacks, and potential applications are described, along with the progress yet to be made. The performance of different approaches is given and compared.

IEEE SENSORS JOURNAL (2021)

Article Optics

Multistep staircase avalanche photodiodes with extremely low noise and deterministic amplification

Stephen D. March et al.

Summary: The study demonstrated a three-step staircase avalanche diode with confirmed gain scaling, which serves as a solid-state analogue to the photomultiplier tube. By arranging the conduction band profile into a series of steps and utilizing impact ionization, the technology achieves twofold gain similar to the dynodes of a photomultiplier tube. Measurements showed expected scaling with the number of staircase steps, and noise properties were found to increase more slowly compared to photomultiplier tubes due to lower stochasticity of impact ionization.

NATURE PHOTONICS (2021)

Proceedings Paper Engineering, Electrical & Electronic

Thick Al0.85Ga0.15As0.56Sb0.44 avalanche photodiodes on InP substrates

Seunghyun Lee et al.

Summary: The study presents the characteristics of Al0.85Ga0.15As0.56Sb0.44 avalanche photodiodes (APDs) on InP substrates, including gain, dark current, and excess noise. AlGaAsSb layers grown using a digital alloy technique exhibited low dark current density and excess noise, making them suitable for short-wavelength infrared applications.

INFRARED TECHNOLOGY AND APPLICATIONS XLVII (2021)

Article Materials Science, Multidisciplinary

Full band Monte Carlo simulation of AlInAsSb digital alloys

Jiyuan Zheng et al.

INFOMAT (2020)

Article Engineering, Electrical & Electronic

Unintentional As incorporation into AlSb and interfacial layers within InAs/AlSb superlattices

Yunong Hu et al.

JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B (2019)

Article Engineering, Electrical & Electronic

Digital Alloy InAlAs Avalanche Photodiodes

Jiyuan Zheng et al.

JOURNAL OF LIGHTWAVE TECHNOLOGY (2018)

Article Physics, Applied

Toward deterministic construction of low noise avalanche photodetector materials

A. K. Rockwell et al.

APPLIED PHYSICS LETTERS (2018)

Article Physics, Applied

Low-noise AlInAsSb avalanche photodiode

Madison E. Woodson et al.

APPLIED PHYSICS LETTERS (2016)

Article Engineering, Electrical & Electronic

HgCdTe Detectors for Space and Science Imaging: General Issues and Latest Achievements

O. Gravrand et al.

JOURNAL OF ELECTRONIC MATERIALS (2016)

Article Engineering, Electrical & Electronic

InGaAs/InAlAs Avalanche Photodiode With Low Dark Current for High-Speed Operation

Shiyu Xie et al.

IEEE PHOTONICS TECHNOLOGY LETTERS (2015)

Article Engineering, Electrical & Electronic

High-Gain InAs Avalanche Photodiodes

Wenlu Sun et al.

IEEE JOURNAL OF QUANTUM ELECTRONICS (2012)

Article Engineering, Electrical & Electronic

The experimental investigation on dark current for InGaAs-InP avalanche photodiodes

Yanli Zhao et al.

MICROELECTRONIC ENGINEERING (2012)

Article Engineering, Electrical & Electronic

Avalanche Multiplication and Excess Noise in InAs Electron Avalanche Photodiodes at 77 K

Andrew Robert Julian Marshall et al.

IEEE JOURNAL OF QUANTUM ELECTRONICS (2011)

Review Physics, Applied

Nonlocal impact ionization and avalanche multiplication

G. J. Rees et al.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2010)

Article Physics, Applied

Avalanche photodiode punch-through gain determination through excess noise analysis

Han-Din Liu et al.

JOURNAL OF APPLIED PHYSICS (2009)

Article Engineering, Electrical & Electronic

Recent advances in telecommunications avalanche photodiodes

Joe C. Campbell

JOURNAL OF LIGHTWAVE TECHNOLOGY (2007)

Article Engineering, Electrical & Electronic

Excess noise measurement in In0.53Ga0.47As

YL Goh et al.

IEEE PHOTONICS TECHNOLOGY LETTERS (2005)

Article Engineering, Electrical & Electronic

Long-wavelength In0.53Ga0.47As-In0.52Al0.48As large-area avalanche photodiodes and arrays

XG Zheng et al.

IEEE JOURNAL OF QUANTUM ELECTRONICS (2004)

Article Engineering, Electrical & Electronic

Field dependence of impact ionization coefficients in In0.53Ga0.47As

JS Ng et al.

IEEE TRANSACTIONS ON ELECTRON DEVICES (2003)

Article Physics, Applied

InGaAs/InAlAs avalanche photodiode with undepleted absorber

N Li et al.

APPLIED PHYSICS LETTERS (2003)