Related references
Note: Only part of the references are listed.
Article
Energy & Fuels
Vanessa Lebarbier Dagle et al.
Summary: The research identified a dimethyl-hexenes rich olefins mixture (DMHROM) as a preferred bioblendstock for SI/ACI combustion engines, with potential for improving gasoline fuel performance. The production, testing, and measurements conducted validated the suitability of DMHROM for enhancing engine efficiency and fuel economy while meeting emissions regulations and ASTM specifications.
Article
Energy & Fuels
Wenjun Zhong et al.
Summary: This study utilized computational fluid dynamic simulation in a constant volume chamber to investigate the spray combustion and emission behavior of a biodiesel and gasoline blend, providing insights into combustion characteristics. A reduced kinetic mechanism for the blend and a multi-step phenomenological soot model were developed to accurately capture spray characteristics and soot formation under GCI engine conditions. The study also explored the effects of ambient oxygen level and temperature on flame structure and soot formation, offering valuable information for practical applications in GCI engines.
Article
Energy & Fuels
Decheng Li et al.
Summary: This study investigated the effects of different water ratios in hydrous ethanol on combustion and emissions of hydrous ethanol-gasoline. The results showed that hydrous ethanol prolongs flame development and propagation duration, decreases Tmax and Pmax, and improves torque and brake thermal efficiency. Increasing water content in gasoline/hydrous ethanol dual fuel also leads to higher HC emissions but lower CO and NOx emissions, as well as smaller particle size.
Article
Energy & Fuels
Xingyu Sun et al.
Summary: Adding hydrogen to natural gas in spark ignition engines improves combustion rate, thermal efficiency, and emissions control.
Article
Energy & Fuels
Erjiang Hu et al.
Summary: A comprehensive experimental and kinetic study was conducted on the low temperature oxidation and pyrolysis of iso-octane and CNPC 92#. The results showed that the five-component model predicted the major intermediates more accurately than the TRF model.
Review
Energy & Fuels
Renat R. Gabdulkhakov et al.
Summary: "Needle coke, essential for the production of high-power graphite electrodes in steel production, is a scarce product in the refining industry. Researchers have been exploring ways to modify raw materials to produce needle coke, and this review provides insights into the various raw materials and additives used in the process."
Article
Energy & Fuels
Zhuoyao He et al.
Summary: The study revealed that variations in fuel components significantly affect both controlled and uncontrolled emissions of the engine. However, these effects are more pronounced under lower engine speed or load conditions, showing the importance of considering operating conditions in emissions studies.
Article
Energy & Fuels
Yoshua Lian Calvin et al.
Summary: The study found that the vapor pressure of GE blends is highly affected by non-ideal vapor-liquid equilibrium mixture, with the initial boiling point gradually increasing as the ethanol concentration rises. Additionally, the addition of ethanol leads to a linear increment in RON, oxygenate content, and density for each type of gasoline.
Article
Chemistry, Physical
Tamer M. M. Abdellatief et al.
Summary: Recently, there has been a rise in requirements for high-quality gasoline and an increase in demand. This research article proposes new insights into a novel octane hyperboosting phenomenon based on isoolefinic hydrocarbons as gasoline additives and its application on Fuzzy modeling. The results show that isooctene and isohexene can significantly improve engine performance, with higher motor octane numbers than pure isooctene and isohexene.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
(2022)
Article
Green & Sustainable Science & Technology
Tolga Kocakulak et al.
Summary: This study experimentally and statistically examined the combustion, performance, and emission results of the HCCI engine under different fuel and engine parameters conditions, and optimized the input parameters to achieve high efficiency operation of the engine.
Article
Environmental Sciences
Mikhail A. Ershov et al.
Summary: This research suggests new approaches to produce modern multifunctional motor gasoline additives, focusing on the components and effects of detergents, corrosion inhibitors, and friction modifiers in the additives. The bench method can be used to assess the effectiveness of the detergent component by accelerating deposit formation under specific conditions.
SCIENCE OF THE TOTAL ENVIRONMENT
(2022)
Article
Environmental Sciences
Tamer M. M. Abdellatief et al.
Summary: This study proposes a new approach to examine the impact of renewable fuel additives through fuzzy modeling, showing that using low carbon oxygenates can enhance the quality and quantity of heavy hydrocracked naphtha, potentially contributing to the production of high quality environmentally friendly gasoline.
SCIENCE OF THE TOTAL ENVIRONMENT
(2022)
Article
Energy & Fuels
Aneesh Vijay Kale et al.
Summary: This study aims to extend the operating load range of a diesel engine in HCCI mode by using high volatile, optimum reactivity fuel. The results show that increasing the content of diisopropyl ether in fuel blends can improve the indicated thermal efficiency, but also increase the emissions of unburned hydrocarbon and carbon monoxide.
Article
Energy & Fuels
I. Schifter et al.
Summary: The merit function allows for the comparison of different gasolines and the optimization of fuel properties. The study found that gasolines blended with ETBE can improve thermal engine efficiency and reduce fuel consumption and emissions, while gasolines blended with ethanol have a greater impact on these factors. For the old vehicular fleet from Mexico, a merit function based on Regular gasoline is proposed.
Article
Energy & Fuels
Dario Lopez Pintor et al.
Summary: This study investigated the effects of stability of 2-methyl furan and 2, 5 dimethyl furan and the addition of butylhydroxytoluene on the autoignition and combustion characteristics of renewable gasoline-like fuel CB#2. The experimental results showed that fuel performance was not affected by the stability of the furans and the addition of butylhydroxytoluene at the concentration explored in this paper.
Article
Energy & Fuels
C. G. Saravanan et al.
Summary: This study investigates the feasibility of using orange peel oil-gasoline blends in a spark-ignition engine and includes fuel characterization, engine experiments, and coating studies. The results show that the physical properties of orange peel oil limit the combustion, but these limitations can be overcome by coating, improving the performance and emissions. These findings have important implications for using orange peel oil as a fuel in spark-ignition engines.
Article
Engineering, Multidisciplinary
Musyaro et al.
Summary: The study found that sweet orange peel oil additive can change the molecular behaviors of fuel blends, increase RON, and influence the physicochemical properties of the fuel blends.
ALEXANDRIA ENGINEERING JOURNAL
(2022)
Article
Energy & Fuels
Mikhail A. Ershov et al.
Summary: This research paper proposes a method to boost the octane rating of low-octane gasoline by adding high-octane isoolefinic hydrocarbons. The study found that the addition of isoolefinic hydrocarbons significantly increased the motor octane number (MON) of the gasoline, indicating improved combustion performance in internal combustion engines.
Article
Thermodynamics
Xumin Zhao et al.
Summary: Increasing octane sensitivity (OS) to reduce end-gas reactivity is conditional, becoming less sensitive with advancing spark timing (ST). The relationship between OS and fuel-specific properties shows that variations beyond OS are crucial in knock tendency when increasing compression ratio (CR). Ethanol Reference Fuels (ERFs) exhibit better knock resistance than Toluene Reference Fuels (TRFs) at high CR conditions due to lower autoignition temperature and more effective chemical and charge cooling effects.
PROCEEDINGS OF THE COMBUSTION INSTITUTE
(2021)
Article
Energy & Fuels
Mikhail A. Ershov et al.
Summary: This study investigates the influence of aromatic amines, aromatic hydrocarbons, and MTBE on the antiknock characteristics of model blends to create a novel technique for producing unleaded aviation gasoline. The results indicate that the optimal fuel composition contains isooctane, isopentane, toluene, isopropylbenzene, MTBE, m-toluidine, and isopropyl alcohol, with characteristics close to commercial aviation gasoline. Furthermore, the non-hydrocarbon additives concentrations tested in this study have been used on an industrial scale in various countries.
Article
Thermodynamics
Ayat Gharehghani et al.
Summary: This study focuses on using machine learning tools to learn the behavior of a single-cylinder engine with HCCI strategy using different fuels. It analyzes the impact of engine Inlet Valve Closing (IVC) temperature and air-fuel equivalence ratio on six objective functions, including thermal efficiency, combustion efficiency, IMEP, NOx, CO, and HC emissions. The results show that HCCI engine fueled with Ethanol and Methanol could produce lower HC and CO emissions, but higher NOx emissions compared to CNG-fueled engine.
Article
Energy & Fuels
Mario Feinauer et al.
Summary: This study investigates the environmental profile of farmed pine wood butanol blended with gasoline in a volumetric ratio of 30% compared to neat gasoline as a fossil reference fuel. The analysis shows that while the production stage of the blend has higher environmental impacts, the use stage presents lower impacts compared to fossil gasoline due to reduced tailpipe emissions.
Article
Thermodynamics
Changfa Tao et al.
Summary: The study investigates the effects of ambient temperatures and gasoline blending ratios on evaporation and combustion characteristics of lubricating oil, used lubricating oil, and the mixture of lubricating oil and gasoline using droplet suspension technology. It shows that different conditions lead to distinct characteristics of lubricating oil and used lubricating oil, and the combustion properties of the mixture of lubricating oil and gasoline vary with the gasoline component ratio.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
(2021)
Review
Energy & Fuels
Xiongbo Duan et al.
Summary: The HCCI engine presents superior fuel economy and emissions compared to traditional combustion engines, but lacks direct control over auto-ignition timing. Effective techniques and controlling strategies, such as fuel management and exhaust gas recirculation, are used to optimize combustion and expand operation range.
Article
Chemistry, Applied
Mikhail A. Ershov et al.
Summary: The development of E30 fuel with an ethyl alcohol content of 20-40% has great potential for automotive technology without modifications. By blending bioethanol with low-octane hydrocarbon fractions, the antiknock performance can be significantly improved, offering promising economic parameters for fuel production.
FUEL PROCESSING TECHNOLOGY
(2021)
Article
Energy & Fuels
D. A. Petrova et al.
Summary: Naphtha reforming is a crucial industrial process in refineries, producing aromatic hydrocarbons for gasoline additives. A mathematical model has been proposed to develop a new method for naphtha reforming, based on kinetic equations and industrial-scale conditions, validated by comparing results with industrial data.
CHEMISTRY AND TECHNOLOGY OF FUELS AND OILS
(2021)
Article
Thermodynamics
Mohd Asjad Siddiqui et al.
Summary: A novel combined power and cooling cycle involving ERC and ORC was proposed to enhance the efficiency of a wet-ethanol fuelled HCCI engine. Simulation and analysis showed improved performance under certain operating conditions with different working fluids.
Review
Energy & Fuels
Tamer M. M. Abdellatief et al.
Summary: Engineers and researchers aim to develop environmentally friendly high-octane gasoline by incorporating organic components to improve low-octane hydrocarbons, addressing global energy and environmental challenges.
Article
Chemistry, Multidisciplinary
Alexey Kameshkov et al.
Summary: This study investigates the potential of producing petroleum coking additives from heavy petroleum residues, with experiments showing that the additives could replace coking coals in the production of metallurgical coke, meeting the required quality indicators.
Article
Multidisciplinary Sciences
Endar Puspawiningtiyas et al.
Summary: Pyrolysis is used to convert oleic basic soap into gasoline-compatible fuel by reacting oleic acid with metal hydroxides. The study found that the highest RON value (89.6) was achieved at 450 degrees Celsius using a Ca/Mg/Zn ratio of 0.15:0.85:1. The pyrolysis process produced bio-hydrocarbon, solid residue, water, and gas with varying compositions of hydrocarbon compounds.
Article
Chemistry, Multidisciplinary
Ignaty Efimov et al.
Summary: The study used the UNIFAC model to calculate the partition coefficients of polycyclic aromatic hydrocarbons and found that methyl derivatives of naphthalene, fluorene, anthracene, and pyrene can be accurately identified by the position of the figurative point on the partition coefficient-retention index plane.
Article
Energy & Fuels
Nitin Lokachari et al.
Summary: The study explores the ignition behavior of an unsaturated alcohol, 3-methyl-2-butenol (prenol), and develops a detailed kinetic model to understand its reactivity pathways and critical reactions. The experimental data and speciation information from literature are used to validate the new kinetic model, contributing to the development of tailor-made fuels for advanced combustion engines.
Article
Energy & Fuels
Jinfei Wang et al.
Summary: The study found that the continuous variable valve lift system can reduce pumping loss, slightly increase volumetric efficiency, and accelerate combustion rate and improve combustion efficiency. Under the Miller cycle strategy, late intake valve close can reduce peak in-cylinder pressure and peak combustion temperature, thereby reducing NOx emissions and mitigating knocking combustion.
Article
Chemistry, Physical
Ahmet Yakin et al.
Summary: The study compared the effects of different fuels on a gasoline engine, finding that E20 blended fuel had higher torque compared to pure gasoline, while ES20 blended fuel had lower torque. However, both blended fuels showed lower engine power and higher specific fuel consumption compared to the pure gasoline engine.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
(2021)
Proceedings Paper
Materials Science, Multidisciplinary
Sanjeev Kumar Verma et al.
Summary: The main purpose of this paper is to study the performance characteristics of homogeneous charge compression ignition (HCCI) engine for various fuels and additives, as well as to analyze the influence of various operating conditions on HCCI engine's performance. HCCI is an alternate internal combustion technology that is more efficient and cleaner than traditional combustion techniques.
MATERIALS TODAY-PROCEEDINGS
(2021)
Article
Energy & Fuels
Ahmet Alper Yontar
Article
Energy & Fuels
M. A. Ershov et al.
Article
Energy & Fuels
Mikhail Ershov et al.
Article
Energy & Fuels
S. M. Ledenev et al.
CHEMISTRY AND TECHNOLOGY OF FUELS AND OILS
(2020)
Article
Energy & Fuels
Mikhail A. Ershov et al.
Article
Energy & Fuels
Mikhail A. Ershov et al.
Article
Energy & Fuels
E. A. Chernysheva et al.
CHEMISTRY AND TECHNOLOGY OF FUELS AND OILS
(2020)
Article
Energy & Fuels
Tamer M. M. Abdellatief et al.
Article
Energy & Fuels
M. Parthasarathy et al.
Article
Energy & Fuels
P. A. Nikul'shin et al.
CHEMISTRY AND TECHNOLOGY OF FUELS AND OILS
(2020)
Article
Transportation Science & Technology
David Vuilleumier et al.
SAE INTERNATIONAL JOURNAL OF FUELS AND LUBRICANTS
(2018)
Review
Thermodynamics
Zhi Wang et al.
PROGRESS IN ENERGY AND COMBUSTION SCIENCE
(2017)
Article
Thermodynamics
James P. Szybist et al.
COMBUSTION AND FLAME
(2017)
Article
Engineering, Chemical
Wael Abdelmoez et al.
INTERNATIONAL JOURNAL OF CHEMICAL REACTOR ENGINEERING
(2016)
Article
Engineering, Chemical
Wael Abdelmoez et al.
INTERNATIONAL JOURNAL OF CHEMICAL REACTOR ENGINEERING
(2016)
Review
Chemistry, Applied
Wael Abdelmoez et al.
JOURNAL OF OLEO SCIENCE
(2014)
Article
Energy & Fuels
S. A. Karpov
CHEMISTRY AND TECHNOLOGY OF FUELS AND OILS
(2007)
Article
Energy & Fuels
EA Nikitina et al.
CHEMISTRY AND TECHNOLOGY OF FUELS AND OILS
(2006)
