☆ 4.7 Article

A knock study of hydrogen-fueled Wankel rotary engine

FUEL (2022)

Related references

Note: Only part of the references are listed.

Article Energy & Fuels

Comparatively investigating the leading and trailing spark plug on the hydrogen rotary engine

Jinxin Yang et al.

Summary: This study experimentally investigated the effect of spark plug position on the combustion and emission characteristics of a hydrogen-fueled Wankel rotary engine, finding that the leading spark plug is more suitable. With the leading spark plug position, a wider ignition range, higher maximum torque, and lower nitric oxide emissions were achieved.

FUEL (2022)

Add to Collection

Review Energy & Fuels

Review of the backfire occurrences and control strategies for port hydrogen injection internal combustion engines

Jianbing Gao et al.

Summary: Hydrogen-fueled internal combustion engines offer zero carbon emissions and excellent combustion characteristics, but the occurrence of backfire in port hydrogen injection engines can limit engine performance improvement, requiring effective control strategies. Backfire control strategies have specific application conditions to ensure their effectiveness and prevent negative impacts.

FUEL (2022)

Add to Collection

Article Chemistry, Physical

Experimental and numerical study on premixed partially dissociated ammonia mixtures. Part I: Laminar burning velocity of NH3/H2/N2/air mixtures

Changwei Ji et al.

Summary: This study measured the laminar burning velocity at various equivalence ratios and dissociation degrees of ammonia using the constant pressure spherical flame method, and compared fifteen kinetic models with the experimental data to find the model with the best consistency.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

Add to Collection

Article Energy & Fuels

Experimentally investigating the asynchronous ignition on a hydrogen-fueled Wankel rotary engine

Hao Meng et al.

Summary: This work experimentally investigates the asynchronous ignition in a hydrogen-fueled Wankel rotary engine. The findings demonstrate that a suitable asynchronous ignition can lead to better power performance and earlier ignition timing of the leading plug is more preferable. Moreover, asynchronous ignition can also reduce knock tendency and achieve a lower maximum pressure rising rate.

FUEL (2022)

Add to Collection

Article Chemistry, Physical

Numerical study of the premixed ammonia-hydrogen combustion under engine-relevant conditions

Du Wang et al.

Summary: This study extensively investigated the combustion properties of ammonia/hydrogen/air premixed combustion and found that most properties of ammonia/hydrogen combustion could be comparable to that of hydrocarbon fuels, except for a slightly lower mixture heating value. The NO mole fraction of stoichiometric ammonia/hydrogen could be even lower than that of hydrocarbons. Promising working conditions for ammonia/hydrogen mixtures are phi from 1.0 to 1.05 and alpha from 40% to 60%.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Add to Collection

Article Energy & Fuels

Effect of hydrogen direct injection strategies and ignition timing on hydrogen diffusion, energy distributions and NOx emissions from an opposed rotary piston engine

Jianbing Gao et al.

Summary: The study found that hydrogen distribution in the combustion chambers was most uneven at a start of injection of -68.2 degrees crank angle (CA) after top dead centre (aTDC) among three injection strategies; meanwhile, it showed the lowest combustion efficiency, below 98.5%. The peak in-cylinder pressure ranged from 40 bar to 83 bar for the given scenarios. Combustion durations were between 20 degrees CA to 30 degrees CA, with ignition timing ranging from -20.85 degrees CA aTDC to -11.06 degrees CA aTDC.

FUEL (2021)

Add to Collection

Article Energy & Fuels

Optimizing the idle performance of an n-butanol fueled Wankel rotary engine by hydrogen addition

Hao Meng et al.

Summary: This study aimed to improve the idle performance of the n-butanol rotary engine by blending hydrogen and reducing idle speed. Results showed that hydrogen could enhance engine stability and economy, as well as effectively reduce CO and HC emissions. In addition, hydrogen enrichment could compensate for the negative effects of reducing idle speed on combustion and emissions.

FUEL (2021)

Add to Collection

Article Energy & Fuels

Numerical simulation on the combustion and NOx emission characteristics of a turbocharged opposed rotary piston engine fuelled with hydrogen under wide open throttle conditions

Jianbing Gao et al.

Summary: Hybrid vehicles are gaining attention due to environmental concerns, and Opposed Rotary Piston (ORP) engines are seen as a promising power source for these vehicles. Research on a turbocharged ORP engine fueled with hydrogen revealed high volumetric efficiency and excellent torque characteristics, with a maximum indicated power density significantly higher than turbocharged four-stroke reciprocating engines fueled with gasoline.

FUEL (2021)

Add to Collection

Article Thermodynamics

Multiple spark plugs coupled with pressure sensors: A new approach for knock mechanism study on SI engines

Hao Shi et al.

Summary: Controlled knock combustion is the focus of research for modern spark-ignition engines to improve thermal efficiency and performance. The study found that activating more spark plugs can promote knock intensity, but symmetrically activating four spark plugs can effectively suppress knock. Additionally, advancing spark timing leads to earlier auto-ignition and more energy release during knock.

ENERGY (2021)

Add to Collection

Article Energy & Fuels

Combined effects of excess air ratio and EGR rate on combustion and emissions behaviors of a GDI engine with CO2 as simulated EGR (CO2) at low load

Changming Gong et al.

Summary: The study demonstrates that simulated EGR (CO2) has a weaker impact on combustion compared to actual EGR, and results in increased peak cylinder pressure, heat release rate, and cylinder temperature under the same EGR rate and excess air ratio conditions. Additionally, simulated EGR (CO2) can improve the COVimep of the engine, while having minimal effect on CO and HC emissions in lean-burn and stoichiometric conditions. Overall, NOX and soot emissions decrease significantly with EGR rate, but soot emissions from simulated EGR (CO2) are higher than actual EGR under any excess air ratios.

FUEL (2021)

Add to Collection

Article Energy & Fuels

Statistical study on engine knock oscillation and heat release using multiple spark plugs and pressure sensors

Hao Shi et al.

Summary: The study investigates the use of a specialized liner with four side spark plugs to trigger controllable knock and produce different in-cylinder flame propagations. Various spark strategies are applied to analyze knock intensities, with results showing the importance of pre-oscillation growth in pressure oscillation amplitude and the effectiveness of four spark ignitions in reducing heat release fluctuations. Insights are provided into the pressure wave propagation during knock and the relationships between knock conditions, pressure oscillations, and heat release.

FUEL (2021)

Add to Collection

Article Chemistry, Physical

Experimental study of the effects of excess air ratio on combustion and emission characteristics of the hydrogen-fueled rotary engine

Hao Meng et al.

Summary: The study investigates the effect of excess air ratio on the combustion and emission characteristic of a hydrogen-fueled rotary engine. It was found that thermal efficiency increases first and then decreases with a decrease in excess air ratio. Increasing MAP can improve thermal efficiency and the highest brake thermal efficiency is achieved at specific conditions. The stability and flame development period decrease with a decreased excess air ratio and increased load.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Add to Collection

Review Chemistry, Physical

Hydrogen and ethanol: Production, storage, and transportation

Yin Ma et al.

Summary: This paper examines the feasibility of using hydrogen and bioethanol blends as energy carriers in the future, providing comprehensive overviews on production, storage, and transportation. Current issues and potential solutions for the three stages are summarized, with optimistic prospects for hydrogen and bioethanol.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Add to Collection

Article Thermodynamics

Realizing stratified mixtures distribution in a hydrogen-enriched gasoline Wankel engine by different compound intake methods

Changwei Ji et al.

ENERGY CONVERSION AND MANAGEMENT (2020)

Add to Collection

Article Energy & Fuels

Experimental investigation of equivalence ratio effects on combustion and emissions characteristics of an H2/methanol dual-injection engine under different spark timings

Changming Gong et al.

FUEL (2020)

Add to Collection

Article Energy & Fuels

Research on the performance of a hydrogen/methanol dual-injection assisted spark-ignition engine using late-injection strategy for methanol

Changming Gong et al.

FUEL (2020)

Add to Collection

Article Chemistry, Physical

Progress on the studies about NOx emission in PFI-H2ICE

Dong-Shuo Ma et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)

Add to Collection

Article Energy & Fuels

Evaluation on combustion and lean-burn limit of a medium compression ratio hydrogen/methanol dual-injection spark-ignition engine under methanol late-injection

Changming Gong et al.

APPLIED ENERGY (2020)

Add to Collection

Article Thermodynamics

A new knock event definition for knock detection and control optimization

P. Bares et al.

APPLIED THERMAL ENGINEERING (2018)

Add to Collection

Article Chemistry, Physical

Experimental investigation on effects of knocking on backfire and its control in a hydrogen fueled spark ignition engine

Vipin Dhyani et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)

Add to Collection

Article Chemistry, Physical

Recent studies on hydrogen usage in Wankel SI engine

Mustafa Ozcanli et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)

Add to Collection

Article Thermodynamics

Knock characterization and development of a new knock indicator for dual-fuel engines

M. S. Lounici et al.

ENERGY (2017)

Add to Collection

Article Thermodynamics

Experimental investigation on effects of exhaust gas recirculation on flame kernel growth rate in a hydrogen fuelled spark ignition engine

B. L. Salvi et al.

APPLIED THERMAL ENGINEERING (2016)

Add to Collection

Review Green & Sustainable Science & Technology

On reliability and flexibility of sustainable energy application route for vehicles in China

Zuo-Yu Sun et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2015)

Add to Collection

Article Thermodynamics

Analysis of onset and severity of knock in SI engine based on in-cylinder pressure oscillations

Gequn Shu et al.

APPLIED THERMAL ENGINEERING (2013)

Add to Collection

Article Chemistry, Physical

Dual nature of hydrogen combustion knock

Stanislaw Szwaja et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2013)

Add to Collection

Article Thermodynamics

The effects of tumble and swirl flows on flame propagation in a four-valve SI engine

Kihyung Lee et al.

APPLIED THERMAL ENGINEERING (2007)

Add to Collection

Article Chemistry, Physical

Knock in spark ignition hydrogen engines

HL Li et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2004)

Add to Collection

© Peeref 2019-2024. All rights reserved.