☆ 4.5 Article

Synergistic Effects of Incorporating Various Types of Nanoparticles on Tensile, Flexural, and Quasi-static Behaviors of GFRP Composites

FIBERS AND POLYMERS (2022)

Related references

Note: Only part of the references are listed.

Article Mechanics

A comparison between the effects of shape memory alloys and carbon nanotubes on the thermal buckling of laminated composite beams

Saeed Kamarian et al.

Summary: The correct choice of reinforcing materials is essential for designing composite structures exposed to heat. This research compares the performances of two advanced materials, Shape Memory Alloys (SMAs) and Carbon Nanotubes (CNTs), in the thermal buckling behavior of thin composite beams. The results show that depending on the structural conditions, one reinforcing material can outperform the other. Simultaneous use of both materials can significantly enhance the critical buckling temperatures.

MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES (2022)

Add to Collection

Article Mechanics

Influence of carbon nanotubes on thermal expansion coefficient and thermal buckling of polymer composite plates: experimental and numerical investigations

S. Kamarian et al.

Summary: The article experimentally explores the effect of multi-walled carbon nanotubes on the coefficient of thermal expansion of epoxy-based composites and presents conclusions based on experimental data. Additionally, numerical analysis of thermal buckling behavior of composite plates is conducted, revealing the significant impact of MWCNTs on critical buckling temperature. Adding 0.3wt.% CNT into the matrix phase can increase the critical buckling temperature between 35 and 42%.

MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES (2021)

Add to Collection

Article Engineering, Mechanical

Thermal buckling analysis of sandwich plates with soft core and CNT-Reinforced composite face sheets

Saeed Kamarian et al.

Summary: This study investigates the use of carbon nanotubes (CNTs) to increase the critical buckling temperature of sandwich plates with soft core and laminated composite face sheets. Experimental tests show that the addition of only 0.3% CNTs significantly enhances the thermo-mechanical properties of the composite face sheets. Thermal buckling equations for sandwich plates with CNT-reinforced face sheets are derived and various analytical methods are employed to analyze the thermal buckling behavior, with results showing a 22%-36% increase in critical buckling temperature due to CNTs.

JOURNAL OF SANDWICH STRUCTURES & MATERIALS (2021)

Add to Collection

Article Materials Science, Composites

Axial and lateral buckling analysis of kevlar/epoxy fiber-reinforced composite laminates incorporating silica nanoparticles

Ozkan Ozbek

Summary: In this study, the experimental effect of silica nanoparticles on the buckling characteristics of Kevlar/epoxy fiber reinforced composite laminates was determined. Results showed that incorporation of NS particles led to increased critical buckling load values, with 1.5 wt% NS content showing the highest values. However, excessive NS content resulted in decreased critical buckling loads due to poor interfacial bonding and agglomeration.

POLYMER COMPOSITES (2021)

Add to Collection

Article Chemistry, Physical

Self-healing polymers using electrosprayed microcapsules containing oil: Molecular dynamics simulation and experimental studies

Chuan Sun et al.

Summary: The study investigates microcapsule-based smart coatings to reduce corrosion rate in oil and gas transmission lines. It has been found that smaller microcapsules improve corrosion resistance and adhesion of the coating to the substrate. A sample with 40 wt% microcapsules shows the best corrosion resistance, but polymers increase the results of electrochemical and water absorption tests, while the formation of microcracks is a serious problem in polymer composites.

JOURNAL OF MOLECULAR LIQUIDS (2021)

Add to Collection

Article Materials Science, Composites

Fracture Toughness of Hybrid Carbon Fibre/Epoxy Enhanced by Graphene and Carbon Nanotubes

Zixin Wang et al.

Summary: This study investigates the effect of graphene nanoplatelets, multi-walled carbon nanotubes, and their hybridizations on the Mode I interlaminar fracture toughness of a carbon fibre reinforced polymer system. It was found that dispersing the smallest GNP size in a specific solvent can significantly enhance the fracture toughness.

APPLIED COMPOSITE MATERIALS (2021)

Add to Collection

Article Materials Science, Textiles

Investigation of Tensile Properties of Glass Fiber/Epoxy Nanocomposites Laminates Enhanced with Graphene Nanoparticles

Mehmet Cagri Tuzemen et al.

Summary: The study found that the addition of graphene nanoparticles can significantly increase the tensile strength of glass fiber/epoxy nanocomposite materials, especially when the addition rate is 0.45%. However, an addition rate higher than 0.45% has a negative impact on mechanical properties, leading to a decrease in tensile strength. Furthermore, finite element analysis results were found to be consistent with experimental results.

FIBERS AND POLYMERS (2021)

Add to Collection

Article Materials Science, Textiles

Fabrication and Characterization of Titanium Dioxide Nanoparticle Filled Polyacrylonitrile Fiber for Photocatalytic Application by Wet Spinning

Phil Hyun Kang et al.

Summary: In this study, PAN/TiO2 porous fibers were successfully fabricated using a wet spinning method. The rheological properties of the solution and the photocatalytic activities of the fibers were investigated, providing important insights for the process and performance of fabricating fibers with nano particle-filled polymers through spinning.

FIBERS AND POLYMERS (2021)

Add to Collection

Article Materials Science, Composites

Low-velocity impact behavior of incorporated GFRP composites with nanoclay and nanosilica in a corrosive environment: Experimental and numerical study

Yasaman Gitiara et al.

Summary: Investigating the impact properties of GFRP composite specimens with nanoclay and nanosilica in a corrosive environment showed that samples with nanoparticles performed better than the pure sample. The addition of 5 wt.% of nanoclay increased impact force and decreased displacement during low-velocity impact tests. Overall, specimens containing 5 wt.% of nanoclay exhibited better strength after immersion in corrosive solution compared to other samples.

JOURNAL OF COMPOSITE MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Molecular dynamics simulations of the effect of temperature and strain rate on mechanical properties of graphene-epoxy nanocomposites

Mohsen Moeini et al.

MOLECULAR SIMULATION (2020)

Add to Collection

Article Materials Science, Composites

Low velocity impact and fracture characterization of SiO2 nanoparticles filled basalt fiber reinforced composite tubes

Mehmet Turan Demirci

JOURNAL OF COMPOSITE MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Synergistic Effects of Graphene/Carbon Nanotubes Hybrid Coating on the Interfacial and Mechanical Properties of Fiber Composites

Wenzhen Qin et al.

MATERIALS (2020)

Add to Collection

Article Materials Science, Composites

Low-velocity impact behavior of UHMWPE fabric/thermoplastic laminates with combined surface treatments of polydopamine and functionalized carbon nanotubes

Logesh Shanmugam et al.

COMPOSITES COMMUNICATIONS (2020)

Add to Collection

Article Materials Science, Composites

Synergistic effects of double-walled carbon nanotubes and nanoclays on mechanical, electrical and piezoresistive properties of epoxy based nanocomposites

A. Esmaeili et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2020)

Add to Collection

Article Multidisciplinary Sciences

Mechanical and Dynamic Properties of Basalt Fiber-Reinforced Composites with Nanoclay Particles

Mehmet Bulut et al.

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2020)

Add to Collection

Article Engineering, Multidisciplinary

Effect of interphase, curvature and agglomeration of SWCNTs on mechanical properties of polymer-based nanocomposites: Experimental and numerical investigations

Mohammad Ali Maghsoudlou et al.

COMPOSITES PART B-ENGINEERING (2019)

Add to Collection

Article Materials Science, Characterization & Testing

Synergistic effect between hybrid nanoparticles of TiO2 and Nb2O5 in the nanostructured materials based on eva matrix

Ana Claudia Silva Valentim et al.

POLYMER TESTING (2018)

Add to Collection

Article Engineering, Mechanical

Synergistic effects of hybrid MWCNT/nanosilica on the tensile and tribological properties of woven carbon fabric epoxy composites

Reza Moghimi Monfared et al.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2018)

Add to Collection

Article Materials Science, Textiles

Incorporation of Functionalized Silica Nanoparticles into Polymeric Films for Enhancement of Water Absorption and Water Vapor Transition

Seyed Jalil Poormohammadian et al.

FIBERS AND POLYMERS (2018)

Add to Collection

Article Materials Science, Composites

Hybrid Composite Using Natural Filler and Multi-Walled Carbon Nanotubes (MWCNTs)

Omid Nabinejad et al.

APPLIED COMPOSITE MATERIALS (2018)

Add to Collection

Article Materials Science, Composites

Effects of multi-walled carbon nanotube and nanosilica on tensile properties of woven carbon fabric-reinforced epoxy composites fabricated using VARIM

M. R. Ayatollahi et al.

JOURNAL OF COMPOSITE MATERIALS (2017)

Add to Collection

Article Materials Science, Composites

Low-velocity impact performance of carbon fiber-reinforced plastics modified with carbon nanotube, nanoclay and hybrid nanoparticles

Tanjheel H. Mahdi et al.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2017)

Add to Collection

Article Materials Science, Composites

Influence of biobased silica/carbon hybrid nanoparticles on thermal and mechanical properties of biodegradable polymer films

Manik C. Biswas et al.

COMPOSITES COMMUNICATIONS (2017)

Add to Collection

Article Materials Science, Textiles

Effect of Alumina Nanoparticles on the Enhancement of Impact and Flexural Properties of the Short Glass/Carbon Fiber Reinforced Epoxy Based Composites

Akash Mohanty et al.

FIBERS AND POLYMERS (2015)

Add to Collection

Article Chemistry, Physical

Synergistic effect of hybrid carbon nantube-graphene oxide as a nanofiller in enhancing the mechanical properties of PVA composites

Yuanqing Li et al.

JOURNAL OF MATERIALS CHEMISTRY (2011)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Endodontic management of a fused mandibular third molar and distomolar: A case report

Ali Zeylabi et al.

AUSTRALIAN ENDODONTIC JOURNAL (2010)

Add to Collection

© Peeref 2019-2024. All rights reserved.