Related references
Note: Only part of the references are listed.Three-Dimensional analysis of mixed mode Compact-Tension-Shear (CTS) Specimens: Stress intensity Factors, T-stresses and crack initiation angles
Pengfei Jin et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2022)
Analytical solution of T-stresses for an inclined crack in compression
Yong Fan et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2021)
T-stresses solution and out-of-plane constraint for central cracked plate (CCP) with I-II mixed mode crack under uniaxial compression
Li-Zhu Jin et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2021)
The effect of crack-tip constraint in some problems of fracture mechanics
Yu. G. Matvienko
ENGINEERING FAILURE ANALYSIS (2020)
Application of modified normalization method for J-R curve determination using clamped SENT specimens with varying in-plane and out-of-plane constraints
Zheng Liu et al.
ENGINEERING FRACTURE MECHANICS (2020)
Evaluation of the SIF and T-stress values of the Brazilian disc with a central notch by hybrid method
Petr Miarka et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
On the use of edge cracked short bend beam specimen for PMMA fracture toughness testing under mixed-mode I/II
S. S. Mousavi et al.
POLYMER TESTING (2020)
A review on mixed mode fracture of metals
Yanlin Wang et al.
ENGINEERING FRACTURE MECHANICS (2020)
Mode I fracture growth in anisotropic rocks: Theory and experiment
Morteza Nejati et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2020)
T-Stress on a cruciform specimen: A preliminary study for a new crack propagation model
R. Baptista
1ST VIRTUAL CONFERENCE ON STRUCTURAL INTEGRITY (VCSI1) (2020)
A new experimental method for tensile property study of quartz sandstone under confining pressure
Zaobao Liu et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2019)
Numerical Analysis of Crack Initiation Direction in Quasi-brittle Materials: Effect of T-Stress
A. S. Fayed
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2019)
Rapid evaluation of notch stress intensity factors using the peak stress method: Comparison of commercial finite element codes for a range of mesh patterns
G. Meneghetti et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2018)
Predictions of fracture load, crack initiation angle, and trajectory for V-notched Brazilian disk specimens under mixed mode I/II loading with negative mode I contributions
Bahador Bahrami et al.
INTERNATIONAL JOURNAL OF DAMAGE MECHANICS (2018)
Wing-crack initiation angle: A new maximum tangential stress criterion by considering T-stress
Hongyan Liu
ENGINEERING FRACTURE MECHANICS (2018)
Experimental and numerical investigation on fracture behavior of CTS specimen under I-II mixed mode loading
Xin-Ting Miao et al.
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2018)
Mixed mode crack tip parameters for different wheel positions relative to a vertical crack at the rail foot
M. R. Ayatollahi et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2018)
Experimental and numerical investigation on fracture behavior of I-II mixed mode crack for commercially pure Titanium
Xin-Ting Miao et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2018)
Crack path stability in brittle fracture under pure mode I loading
M. R. Ayatollahi et al.
ECF22 - LOADING AND ENVIRONMENTAL EFFECTS ON STRUCTURAL INTEGRITY (2018)
Three-dimensional mixed-mode (I and II) crack-front fields in ductile thin plates - effects of T-stress
P. Ding et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2017)
Three-dimensional finite element analyses of T-stress for different experimental specimens
Xin-Ting Miao et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2017)
Brittle fracture of rock under combined tensile and compressive loading conditions
S. B. Tang et al.
CANADIAN GEOTECHNICAL JOURNAL (2017)
T-stress effects on crack deflection: Straight vs. curved crack advance
A. Sapora et al.
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2016)
Rapid finite element evaluation of the averaged strain energy density of mixed-mode (I plus II) crack tip fields including the T-stress contribution
A. Campagnolo et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2016)
Determination of fracture parameters in center cracked circular discs of concrete under diametral loading: A numerical analysis and experimental results
Cheng Hou et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2016)
On the necessity of using critical distance model in mixed mode brittle fracture prediction of V-notched Brazilian disk specimens under negative mode I conditions
M. R. Ayatollahi et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2016)
A review of T-stress and its effects in fracture mechanics
M. Gupta et al.
ENGINEERING FRACTURE MECHANICS (2015)
The effect of T-stress on the fracture of brittle rock under compression
S. B. Tang
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2015)
The role of T-stress on kinking angle of interface cracks
M. M. Mirsayar et al.
MATERIALS & DESIGN (2015)
Averaged strain energy density evaluated rapidly from the singular peak stresses by FEM: cracked components under mixed-mode (I plus II) loading
G. Meneghetti et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2015)
A review of fracture toughness transferability with constraint and stress gradient
G. Pluvinage et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2014)
Rock fracture toughness study using cracked chevron notched Brazilian disc specimen under pure modes I and II loading - A statistical approach
M. R. M. Aliha et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2014)
T-stress for crack paths in test specimens subject to mixed mode loading
V. N. Shlyannikov
ENGINEERING FRACTURE MECHANICS (2013)
Analysis of fracture initiation angle in some cracked ceramics using the generalized maximum tangential stress criterion
M. R. M. Aliha et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2012)
Fracture Analysis of Some Ceramics Under Mixed Mode Loading
Majid Reza Ayatollahi et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2011)
Mixed mode fracture in soda lime glass analyzed by using the generalized MTS criterion
M. R. Ayatollahi et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2009)
On the use of Brazilian disc specimen for calculating mixed mode I-II fracture toughness of rock materials
M. R. Ayatollahi et al.
ENGINEERING FRACTURE MECHANICS (2008)
Stress intensity factor for a cracked specimen under compression
ZM Zhu et al.
ENGINEERING FRACTURE MECHANICS (2006)
The role of T-stress in brittle fracture for linear elastic materials under mixed-mode loading
DJ Smith et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2001)
The initiation of secondary cracks in compression
A Bobet
ENGINEERING FRACTURE MECHANICS (2000)