Related references
Note: Only part of the references are listed.Joining of Fibre-Reinforced Thermoplastic Polymer Composites by Friction Stir Welding-A Review
Miguel A. R. Pereira et al.
APPLIED SCIENCES-BASEL (2022)
Effect of vibration on machining and mechanical properties of AZ91 alloy during FSP: modeling and experiments
Behrouz Bagheri et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2021)
A review on manufacturing the surface composites by friction stir processing
Shalok Bharti et al.
MATERIALS AND MANUFACTURING PROCESSES (2021)
A Comprehensive Review on Optimal Welding Conditions for Friction Stir Welding of Thermoplastic Polymers and Their Composites
Syed Haris Iftikhar et al.
POLYMERS (2021)
Effect of Friction Stir Welding Techniques and Parameters on Polymers Joint Efficiency-A Critical Review
Miguel A. R. Pereira et al.
POLYMERS (2021)
A New Approach to Direct Friction Stir Processing for Fabricating Surface Composites
Abdulla I. Almazrouee et al.
CRYSTALS (2021)
Mechanical, wear and corrosion behaviors of AZ91/SiC composite layer fabricated by friction stir vibration processing
Amin Abdollahzadeh et al.
SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES (2021)
Al 5251-based hybrid nanocomposite by FSP reinforced with graphene nanoplates and boron nitride nanoparticles: Microstructure, wear, and mechanical characterization
Essam B. Moustafa et al.
NANOTECHNOLOGY REVIEWS (2021)
Effect of ultrasonic vibration on thermal and material flow behavior, microstructure and mechanical properties of friction stir welded Al/Cu joints
Weihong Tian et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
Development of AZ91/SiC surface composite by FSP: effect of vibration and process parameters on microstructure and mechanical characteristics
Behrouz Bagheri et al.
ADVANCES IN MANUFACTURING (2020)
Experimental and numerical study of polyethylene hybrid joints: Friction stir spot welded joints reinforced with adhesive
M. R. Adibeig et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2020)
Friction lap welding AA6061 alloy and GFR nylon: Influence of welding parameters and groove features on joint morphology and mechanical property
Yinfei Yan et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2020)
Effect of second-phase particle size and presence of vibration on AZ91/SiC surface composite layer produced by FSP
Behrouz Bagheri et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2020)
Friction Stir Welding and Friction Spot Stir Welding Processes of Polymers-State of the Art
Francesco Lambiase et al.
MATERIALS (2020)
A Review of Friction Stir Processing of Structural Metallic Materials: Process, Properties, and Methods
Anna P. Zykova et al.
METALS (2020)
Mechanical and tribological properties of AA7075-T6 metal matrix composite reinforced with ceramic particles and aloevera ash via Friction stir processing
Lakshay Tyagi et al.
MATERIALS RESEARCH EXPRESS (2020)
Ultrasonic-induced excess vacancies in friction stir processing and exploration of acoustoplastic effect
Yanying Hu et al.
SCRIPTA MATERIALIA (2020)
A comparative study between friction stir processing and friction stir vibration processing to develop magnesium surface nanocomposites
Behrouz Bagheri et al.
INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2020)
Friction stir process: a green fabrication technique for surface composites-a review paper
Manoj Kumar Gupta
SN APPLIED SCIENCES (2020)
FABRICATION OF SURFACE COMPOSITE BY FRICTION STIR PROCESSING USING A NOVEL DIRECT PARTICLE INJECTION TOOL
P. Muthukumar et al.
SURFACE REVIEW AND LETTERS (2019)
An investigation on the dissimilar friction stir welding of T-joints between AA5754 aluminum alloy and poly(methyl methacrylate)
Hamed Aghajani Derazkola et al.
THIN-WALLED STRUCTURES (2019)
Research Status and Prospect of Friction Stir Processing Technology
Kan Li et al.
COATINGS (2019)
Metallurgical behavior and variation of vibro-acoustic signal during preheating assisted friction stir welding between AA6061-T6 and AA7075-T651 alloys
Ashu Garg et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2019)
Novel study of joining of acrylonitrile butadiene styrene and polycarbonate plate by using friction stir welding with double-step shoulder
Sudhir Kumar et al.
JOURNAL OF MANUFACTURING PROCESSES (2019)
Constitutive equation including acoustic stress work and plastic strain for modeling ultrasonic vibration assisted friction stir welding process
Wenzhen Zhao et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2019)
Analyzing of joint strength, impact energy, and angular distortion of the ABS friction stir welded joints reinforced by nanosilica addition
Reza Bagherian Azhiri et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Tensile properties of friction stir welding of thermoplastic pipes based on a novel designed mechanism
Amir Mosavvar et al.
WELDING IN THE WORLD (2019)
Investigations into the mechanical, morphological and thermal analyses of friction stir processing of high-density polyethylene composites
Jicheng Gao et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2018)
On the friction stir welding, tool design optimization, and strain rate-dependent mechanical properties of HDPE-ceramic composite joints
Kabeer Raza et al.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2018)
Issues and strategies in composite fabrication via friction stir processing: A review
Sandeep Rathee et al.
MATERIALS AND MANUFACTURING PROCESSES (2018)
Effects of processing parameters on the characteristics of dissimilar friction-stir-welded joints between AA5058 aluminum alloy and PMMA polymer
Hamed Aghajani Derazkola et al.
WELDING IN THE WORLD (2018)
Friction stir processing - State of the art
Marek Stanislaw Weglowski
ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2018)
Friction stir welding/processing of polymers and polymer matrix composites
Yongxian Huang et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
Experimental and thermomechanical study on FSW of PMMA polymer T-joint
Majid Elyasi et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Fabrication of UHMW polyethylene/nano-hydroxyapatite biocomposite via heat-assisted friction stir processing
Imran Khan et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Joining of aluminum alloy and polymer via friction stir lap welding
Yongxian Huang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
Effects of alumina nanoparticles on the microstructure, strength and wear resistance of poly(methyl methacrylate)-based nanocomposites prepared by friction stir processing
Hamed Aghajani Derazkola et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2018)
Measurement and evaluation of joint properties in friction stir welding of ABS sheets reinforced by nanosilica addition
Reza Bagherian Azhiri et al.
MEASUREMENT (2018)
Reinforced Dissimilar Friction Stir Weld of Polypropylene to Acrylonitrile Butadiene Styrene with Copper Nanopowder
Mojtaba Rezaee Hajideh et al.
JOURNAL OF MANUFACTURING PROCESSES (2018)
Analysis of welding load reduction in ultrasonic vibration-enhanced friction stir welding
L. Shi et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
A Review of Recent Progress in Solid State Fabrication of Composites and Functionally Graded Systems Via Friction Stir Processing
Sandeep Rathee et al.
CRITICAL REVIEWS IN SOLID STATE AND MATERIALS SCIENCES (2018)
Friction stir welding tooling for polymers: review and prospects
Shayan Eslami et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Fabrication of high-density polyethylene/multiwalled carbon nanotube composites via submerged friction stir processing: Evaluation of morphological, mechanical, and thermal behavior
Jicheng Gao et al.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2017)
Drillability study of pultruded and sheet moulding compound thick polymeric composites
B. Ramesh et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2017)
Fabrication and characterization of in-situ Al/Nb metal/intermetallic surface composite by friction stir processing
Seyyed Reza Hosseini Zeidabadi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Application and exploration of friction stir welding/processing in plastics industry
Jicheng Gao et al.
MATERIALS SCIENCE AND TECHNOLOGY (2017)
Microstructure and tensile properties of dissimilar submerged friction stir welds between HDPE and ABS sheets
Jicheng Gao et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
Effect of processing parameters on morphology and tensile properties of PP/EPDM/organoclay nanocomposites fabricated by friction stir processing
M. R. Nakhaei et al.
IRANIAN POLYMER JOURNAL (2016)
Influence of Multi-Pass Friction Stir Processing on the Corrosion Behavior of an Al-Mg-Si Alloy
M. Esmaily et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2016)
Experimental evaluation of ultrasonic-assisted friction stir process effect on in situ dispersion of multi-walled carbon nanotubes throughout polyamide 6
Reza Farshbaf Zinati
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
Surface composites by friction stir processing: A review
Vipin Sharma et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)
Effects of Carbon Fillers on Crystallization Properties and Thermal Conductivity of Poly(phenylene sulfide)
Shuling Deng et al.
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2015)
Friction stir surfacing of cast A356 aluminium-silicon alloy with boron carbide and molybdenum disulphide powders
R. Srinivasu et al.
DEFENCE TECHNOLOGY (2015)
Enhanced electrical conductivity, mechanical modulus, and thermal stability of immiscible polylactide/polypropylene blends by the selective localization of multi-walled carbon nanotubes
Tae-Won Lee et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2014)
Mechanical and morphological properties of high density polyethylene and polylactide blends
Gaurav Madhu et al.
JOURNAL OF POLYMER ENGINEERING (2014)
Morphology and strength of acrylonitrile butadiene styrene welds performed by robotic friction stir welding
N. Mendes et al.
MATERIALS & DESIGN (2014)
Improving interfacial adhesion between immiscible polymers by carbon nanotubes
Jie Chen et al.
POLYMER (2013)
Injection-Moulding Compounding of PP Polymer Nanocomposites
Markus Gottfried Battisti et al.
STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING (2013)
On the feasibility of producing polymer-metal composites via novel variant of friction stir processing
Ehsan Azarsa et al.
JOURNAL OF MANUFACTURING PROCESSES (2013)
Effect of tool geometry on friction stir spot welding of polypropylene sheets
M. K. Bilici
EXPRESS POLYMER LETTERS (2012)
Composite fabrication using friction stir processing-a review
H. S. Arora et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2012)
The optimization of friction stir welding process parameters to achieve maximum tensile strength in polyethylene sheets
Yahya Bozkurt
MATERIALS & DESIGN (2012)
Multipass Friction-Stir Processing and its Effect on Mechanical Properties of Aluminum Alloy 5086
K. N. Ramesh et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2012)
Integrated modeling of friction stir welding of 6xxx series Al alloys: Process, microstructure and properties
A. Simar et al.
PROGRESS IN MATERIALS SCIENCE (2012)
A novel approach for producing polymer nanocomposites by in-situ dispersion of clay particles via friction stir processing
Mohsen Barmouz et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Investigation of the effects of critical process parameters of friction stir welding of polyethylene
S. Saeedy et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2011)
Friction Stir Processing of Particle Reinforced Composite Materials
Yong X. Gan et al.
MATERIALS (2010)
Mechanical properties of high density polyethylene/carbon nanotube composites
S. Kanagaraj et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2007)
Effects of tool tilt angle on tensile strength and fracture locations of friction stir welding of polyethylene
A. Arici et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2007)
Thermal, mechanical and electrical properties of copper powder filled low-density band linear low-density polyethylene composites
A. S. Luyt et al.
POLYMER DEGRADATION AND STABILITY (2006)
Potential of plasma nitriding of polymer for improved hardness and wear resistance
CX Li et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2005)
Friction stir processing: a novel technique for fabrication of surface composite
RS Mishra et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)
Share Paper
