4.8 Article

Life Cycle Assessment of Microplastics Reveals Their Greater Environmental Hazards than Mismanaged Polymer Waste Losses

Related references

Note: Only part of the references are listed.
Article Green & Sustainable Science & Technology

Energy and environmental sustainability of waste personal protective equipment (PPE) treatment under COVID-19

Xiang Zhao et al.

Summary: This study introduces a novel waste personal protective equipment processing system that enables energy recovery through producing renewable fuels and basic chemicals, with a focus on energy and environmental sustainability evaluation. Findings suggest that establishing facilities in optimal numbers, sizes, and locations in New York State can significantly reduce greenhouse gas emissions and fossil fuel use.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2022)

Article Environmental Sciences

Cross-oceanic distribution and origin of microplastics in the subsurface water of the South China Sea and Eastern Indian Ocean

Changjun Li et al.

Summary: The study revealed significant differences in the abundance of marine microplastics in different aquatic environments in the cross-oceanic region of the South China Sea and Eastern Indian Ocean. Coastal regions showed higher levels of microplastics compared to open ocean areas, indicating a significant contribution of land-based sources. Additionally, no significant correlation was found between the physical and chemical properties of water and the abundance of microplastics.

SCIENCE OF THE TOTAL ENVIRONMENT (2022)

Article Green & Sustainable Science & Technology

Aquatic micro- and nano-plastics in life cycle assessment: Development of an effect factor for the quantification of their physical impact on biota

Jerome Lavoie et al.

Summary: This study focuses on the impact of micro- and nano-sized plastics (MNPs) on aquatic ecosystems, extracting data from academic literature and analyzing the differences in effects on different aquatic species, particularly between polystyrene (PS) and other polymer types. The research suggests that a single generic Effect Factor (EF) could be used for now due to the high uncertainty and lack of statistical difference among MNPs at the single species level.

JOURNAL OF INDUSTRIAL ECOLOGY (2022)

Article Engineering, Environmental

Forecasting plastic waste generation and interventions for environmental hazard mitigation

Yee Van Fan et al.

Summary: This study uses a neural network model to predict plastic waste generation in the EU-27 in 2030 and evaluates interventions to mitigate the environmental impact. Results show the importance of reducing plastic waste, with certain countries needing to address high amounts of untreated plastic waste per capita.

JOURNAL OF HAZARDOUS MATERIALS (2022)

Article Environmental Sciences

Heavy metal leaching behaviour and long-term environmental risk assessment of cement-solidified municipal solid waste incineration fly ash in sanitary landfill

Qin Liu et al.

Summary: This study investigated the leaching characteristics of different heavy metals in cement-solidified MSWIFA blocks and established mechanical models to estimate the long-term environmental risk. The results showed that the leaching of lead was controlled by diffusion, while the leaching of copper, chromium, arsenic, and nickel was mainly controlled by surface wash-off and diffusion.

CHEMOSPHERE (2022)

Article Engineering, Environmental

Plastic Circular Economy Framework using Hybrid Machine Learning and Pinch Analysis

Hon Huin Chin et al.

Summary: This study utilizes machine learning approach to evaluate the recyclability of plastic waste by categorizing the quality trends of polymers, aiming to maximize the waste quality grading system and resource utilization.

RESOURCES CONSERVATION AND RECYCLING (2022)

Review Engineering, Environmental

Environmental source, fate, and toxicity of microplastics

Chunhui Wang et al.

Summary: Microplastics, small plastic particles less than 5 mm in size, have attracted increasing global attention due to their widespread distribution in various environmental compartments. Studies show that the sources of microplastics are diverse, and their presence and impacts in the environment are influenced by multiple factors. Research gaps exist in quantitatively analyzing different exposure routes of microplastics and their toxicity to organisms. Further efforts are needed to focus on the occurrence and fate of microplastics in terrestrial environments, especially in the atmosphere and soil, as well as investigating the toxicity mechanisms of microplastics.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Article Engineering, Chemical

Waste high-density polyethylene recycling process systems for mitigating plastic pollution through a sustainable design and synthesis paradigm

Xiang Zhao et al.

Summary: This article discusses the sustainable design and synthesis of open-loop recycling process for waste HDPE, developing a comprehensive superstructure for producing monomers, aromatic mixtures, and fuels. The optimization problem is formulated as a multi-objective mixed-integer nonlinear fractional programming to optimize unit NPV and unit life cycle environmental impacts. Results show the optimal unit NPV and greenhouse gas emissions for the most environmentally friendly HDPE recycling process.

AICHE JOURNAL (2021)

Article Energy & Fuels

Can decontamination and reuse of N95 respirators during COVID-19 pandemic provide energy, environmental, and economic benefits?

Yanqiu Tao et al.

Summary: This study investigates the benefits of decontamination and reuse of N95 respirators in terms of energy, environment, and economics. Dry heat and VHP were found to be effective methods of decontamination, reducing carbon footprint and energy demand compared to single-use cases. The results reaffirm the energy, environmental, and economic favorability of decontamination and reuse of N95 respirators.

APPLIED ENERGY (2021)

Article Environmental Sciences

Seasonal variation and risk assessment of microplastics in surface water of the Manas River Basin, China

Gaoliang Wang et al.

Summary: The study investigated the characteristics of microplastic pollution in the Manas River Basin in China during dry and wet seasons, revealing differences in microplastic abundance between April and July, as well as the impact of high-hazard polymers on the evaluation of microplastic contamination. The results showed that the pollution level caused by microplastic abundance in the study area was minor.

ECOTOXICOLOGY AND ENVIRONMENTAL SAFETY (2021)

Article Engineering, Environmental

Is incineration the terminator of plastics and microplastics?

Zhan Yang et al.

Summary: The study found that a significant amount of microplastics exist in bottom ash generated from incineration, with each metric ton of waste producing a considerable number of microplastic particles. Polypropylene and polystyrene were identified as the predominant types, and microplastics exhibited various forms with abundance influenced by factors such as waste separation, GDP per capita, and furnace types.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Article Engineering, Environmental

New insights into the vertical distribution and microbial degradation of microplastics in urban river sediments

Lihua Niu et al.

Summary: This study investigated the vertical distribution of microplastics and the bacterial community assemblages in urban river sediments. The results showed that microplastics and associated microbial communities have vertical profiles in river sediments. The indicative plastic-degrading bacteria significantly increased in abundance and centrality from shallow to deep layers, suggesting a primary role in the degradation of microplastics in deep sediments.

WATER RESEARCH (2021)

Article Energy & Fuels

Waste respirator processing system for public health protection and climate change mitigation under COVID-19 pandemic: Novel process design and energy, environmental, and techno-economic perspectives

Xiang Zhao et al.

Summary: This study proposes a novel waste respirator processing system to protect public health and mitigate climate change. The system incorporates sterilization and pre-processing technologies to resist viral infection and reduce greenhouse gas emissions, with a payback time of seven years and an internal rate of return of 21.5%.

APPLIED ENERGY (2021)

Article Environmental Sciences

Incorporating use phase chemical leaching and water quality testing for life cycle toxicity assessment of cross-linked polyethylene (PEX) piping

Robert Phillips et al.

Summary: Life cycle assessment is increasingly being considered for material selection in residential drinking water piping, with a focus on the contribution of leached organics to overall lifecycle human toxicity. Integration of empirical leaching data provides valuable insights for considering water quality in LCA studies.

SCIENCE OF THE TOTAL ENVIRONMENT (2021)

Article Engineering, Environmental

Lifetime Accumulation of Microplastic in Children and Adults

Nur Hazimah Mohamed Nor et al.

Summary: The study presents a probabilistic lifetime exposure model for microplastics that considers intake through various pathways, simulating concentrations in different parts of the body and validating against empirical data. Results indicate a small contribution of microplastics to overall chemical intake. Future research should focus on exploring the contributions of other food types to microplastic exposure.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2021)

Article Engineering, Environmental

Modeling the Conditional Fragmentation-Induced Microplastic Distribution

Liuwei Wang et al.

Summary: The study investigates the size distribution of microplastics in the soil environment, revealing trends in the size changes of microplastics under different land use settings and proposing conditional aging as a controlling factor for the size distribution. The model is suitable for describing the size distribution of microplastics from different sources and aging processes, and can be used for various research purposes such as source identification, transport modeling, and risk assessment.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2021)

Article Multidisciplinary Sciences

Second life and recycling: Energy and environmental sustainability perspectives for high-performance lithium-ion batteries

Yanqiu Tao et al.

Summary: Research shows that LIBs with higher specific energy perform better in terms of lifecycle environmental performance, but their environmental benefits from second life application are less pronounced. Direct cathode recycling is found to be the most effective method in reducing environmental impacts, while hydrometallurgical recycling has limited sustainability benefits for high-performance LIBs. Battery design with less aluminum and alternative anode materials, like silicon-based anode, could enable more sustainable LIB recycling.

SCIENCE ADVANCES (2021)

Article Green & Sustainable Science & Technology

Acute riverine microplastic contamination due to avoidable releases of untreated wastewater

Jamie Woodward et al.

Summary: The authors discuss how untreated wastewater containing microplastics and raw sewage is discharged into UK rivers, causing severe contamination of river beds and threatening biodiversity and habitats. Climate change and urbanization will exacerbate the microplastic pollution in river ecosystems, as summer flows decrease and wastewater discharges increase.

NATURE SUSTAINABILITY (2021)

Article Engineering, Environmental

Using the US National Air Toxics Assessment to benchmark the USEtox inhalation-mediated carcinogenic impacts of air emissions

Kaixin Huang et al.

Summary: Regional air quality models generate high-resolution predictions of pollutant concentrations using advanced processes, while multi-media box modeling underpinning the USEtox model is simpler but covers a wide range of hazardous air pollutants. Comparison between USEtox and a regulatory model shows good alignment in carcinogenic impacts, with intake fraction being the major driver of cancer risk differences. Both NATA and USEtox results exhibit consistent statistical significance across pollutant characteristics, with molecular weight and vapor pressure playing a significant role in atmospheric fate.

INTERNATIONAL JOURNAL OF LIFE CYCLE ASSESSMENT (2021)

Review Multidisciplinary Sciences

Toward polymer upcycling-adding value and tackling circularity

LaShanda T. J. Korley et al.

Summary: Chemical recycling and polymer upcycling offer solutions to the challenges of plastic waste heterogeneity and property reductions, enabling circularity and reducing energy consumption and environmental impacts. The industrial adoption of these approaches is encouraging and plays a critical role in addressing the fate of plastics and advancing next-generation materials design.

SCIENCE (2021)

Article Chemistry, Multidisciplinary

Consequential Life Cycle Assessment and Optimization of High-Density Polyethylene Plastic Waste Chemical Recycling

Xiang Zhao et al.

Summary: This study develops a CLCO framework to determine the optimal waste HDPE chemical recycling technology pathway. System expansion quantifies environmental consequences and reveals market dynamics. An optimization algorithm solves multi-objective problems. Market dynamics results show the impact of consuming natural gas and onsite manufacturing propylene on the market.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2021)

Article Green & Sustainable Science & Technology

Life cycle assessment of recycling strategies for perovskite photovoltaic modules

Xueyu Tian et al.

Summary: Effective recycling of spent perovskite solar modules can significantly reduce energy payback time and greenhouse gas emission, with the best recycled module architecture showing extremely low energy payback time and greenhouse gas emission factor, outcompeting market-leading silicon materials. Sensitivity analyses highlight the importance of prolonging device lifetime and quantify the effects of uncertainty induced by manufacturing processes, operating conditions, and individual differences for each module.

NATURE SUSTAINABILITY (2021)

Article Environmental Sciences

Distribution of microplastics in surface water and sediments of Qin river in Beibu Gulf, China

Lishan Zhang et al.

SCIENCE OF THE TOTAL ENVIRONMENT (2020)

Review Engineering, Environmental

A Review of Microplastics in Table Salt, Drinking Water, and Air: Direct Human Exposure

Qun Zhang et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2020)

Review Environmental Sciences

A review of microplastics in the aquatic environmental: distribution, transport, ecotoxicology, and toxicological mechanisms

Jia Du et al.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2020)

Article Environmental Sciences

Stochastic evolution of hydraulic geometry relations in the lower Yellow River of China under environmental uncertainties

Xiaolong Song et al.

INTERNATIONAL JOURNAL OF SEDIMENT RESEARCH (2020)

Article Chemistry, Multidisciplinary

Degradation Rates of Plastics in the Environment

Ali Chamas et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)

Article Engineering, Environmental

Effects of Microplastic Fibers and Drought on Plant Communities

Yudi M. Lozano et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2020)

Article Environmental Sciences

Hydrodynamic modelling of traffic-related microplastics discharged with stormwater into the Gota River in Sweden

Mia Bondelind et al.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2020)

Article Engineering, Environmental

Understanding and Improving Microplastic Removal during Water Treatment: Impact of Coagulation and Flocculation

Mathieu Lapointe et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2020)

Article Engineering, Environmental

Solving the Nonalignment of Methods and Approaches Used in Microplastic Research to Consistently Characterize Risk

Albert A. Koelmans et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2020)

Article Engineering, Environmental

Microplastics Reduce Lipid Digestion in Simulated Human Gastrointestinal System

Huiwen Tan et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2020)

Review Engineering, Environmental

Review of microplastic occurrence and toxicological effects in marine environment: Experimental evidence of inflammation

Meghdad Pirsaheb et al.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2020)

Article Multidisciplinary Sciences

Microplastic regulation should be more precise to incentivize both innovation and environmental safety

Denise M. Mitrano et al.

NATURE COMMUNICATIONS (2020)

Article Multidisciplinary Sciences

Currently monitored microplastics pose negligible ecological risk to the global ocean

Ricardo Beiras et al.

SCIENTIFIC REPORTS (2020)

Article Multidisciplinary Sciences

The United States' contribution of plastic waste to land and ocean

Kara Lavender Law et al.

SCIENCE ADVANCES (2020)

Article Multidisciplinary Sciences

Abundance of non-conservative microplastics in the upper ocean from 1957 to 2066

Atsuhiko Isobe et al.

NATURE COMMUNICATIONS (2019)

Article Environmental Sciences

The effect of dams on river transport of microplastic pollution

Lisa Watkins et al.

SCIENCE OF THE TOTAL ENVIRONMENT (2019)

Article Environmental Sciences

Occurrence and fate of microplastic debris in middle and lower reaches of the Yangtze River - From inland to the sea

Xiong Xiong et al.

SCIENCE OF THE TOTAL ENVIRONMENT (2019)

Review Engineering, Environmental

Microplastics in freshwaters and drinking water: Critical review and assessment of data quality

Albert A. Koelmans et al.

WATER RESEARCH (2019)

Article Environmental Sciences

Ecotoxicity and genotoxicity of polystyrene microplastics on higher plant Vicia faba

Xiaofeng Jiang et al.

ENVIRONMENTAL POLLUTION (2019)

Article Engineering, Environmental

Human Consumption of Microplastics

Kieran D. Cox et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2019)

Article Engineering, Environmental

Polymer-Specific Modeling of the Environmental Emissions of Seven Commodity Plastics As Macro- and Microplastics

Delphine Kawecki et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2019)

Correction Geosciences, Multidisciplinary

Atmospheric transport and deposition of microplastics in a remote mountain catchment (vol 12, pg 339, 2019)

Steve Allen et al.

NATURE GEOSCIENCE (2019)

Article Polymer Science

Temperature and light intensity effects on photodegradation of high-density polyethylene

Andrew Fairbrother et al.

POLYMER DEGRADATION AND STABILITY (2019)

Article Environmental Sciences

Modelling global river export of microplastics to the marine environment: Sources and future trends

Jikke van Wijnen et al.

SCIENCE OF THE TOTAL ENVIRONMENT (2019)

Review Environmental Sciences

Microplastics in drinking water treatment - Current knowledge and research needs

Katerina Novotna et al.

SCIENCE OF THE TOTAL ENVIRONMENT (2019)

Article Engineering, Environmental

Simplifying Microplastic via Continuous Probability Distributions for Size, Shape, and Density

Merel Kooi et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY LETTERS (2019)

Article Engineering, Environmental

Riverine Microplastic Pollution in the Pearl River Delta, China: Are Modeled Estimates Accurate?

Lei Mai et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2019)

Review Engineering, Environmental

Emergence of Nanoplastic in the Environment and Possible Impact on Human Health

Roman Lehner et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2019)

Review Chemistry, Analytical

Methods for sampling and detection of microplastics in water and sediment: A critical review

Joana Correia Prata et al.

TRAC-TRENDS IN ANALYTICAL CHEMISTRY (2019)

Article Multidisciplinary Sciences

Plastics in sea surface waters around the Antarctic Peninsula

Ana L. d F. Lacerda et al.

SCIENTIFIC REPORTS (2019)

Article Engineering, Environmental

Cradle-to-Grave Life Cycle Assessment and Techno-Economic Analysis of Polylactic Acid Composites with Traditional and Bio-Based Fillers

Randall Haylock et al.

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2018)

Review Environmental Sciences

Occurrence, sources, human health impacts and mitigation of microplastic pollution

Samaneh Karbalaei et al.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2018)

Article Environmental Sciences

Fate of nano- and microplastic in freshwater systems: A modeling study

Ellen Besseling et al.

ENVIRONMENTAL POLLUTION (2017)

Article Engineering, Environmental

Characterizing Aggregated Exposure to Primary Particulate Matter: Recommended Intake Fractions for Indoor and Outdoor Sources

Peter Fantke et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2017)

Article Engineering, Environmental

Microplastic Exposure Assessment in Aquatic Environments: Learning from Similarities and Differences to Engineered Nanoparticles

Thorsten Hueffer et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2017)

Article Engineering, Environmental

Assessing the Risk of Engineered Nanomaterials in the Environment: Development and Application of the nanoFate Model

Kendra L. Garner et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2017)

Review Environmental Sciences

The plastic in microplastics: A review

Anthony L. Andrady

MARINE POLLUTION BULLETIN (2017)

Review Engineering, Environmental

Challenges and opportunities of biodegradable plastics: A mini review

Maja Rujnic-Sokele et al.

WASTE MANAGEMENT & RESEARCH (2017)

Article Engineering, Environmental

Effect of Microplastic on the Gills of the Shore Crab Carcinus maenas

Andrew J. R. Watts et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2016)

Article Environmental Sciences

Release of primary microplastics from consumer products to wastewater in the Netherlands

Annemarie van Wezel et al.

ENVIRONMENTAL TOXICOLOGY AND CHEMISTRY (2016)

Article Biochemical Research Methods

Secreted protein eco-corona mediates uptake and impacts of polystyrene nanoparticles on Daphnia magna

Fatima Nasser et al.

JOURNAL OF PROTEOMICS (2016)

Article Environmental Sciences

Freshwater ecotoxicity characterisation factor for metal oxide nanoparticles: A case study on titanium dioxide nanoparticle

Beatrice Salieri et al.

SCIENCE OF THE TOTAL ENVIRONMENT (2015)

Article Engineering, Environmental

Health effects of fine particulate matter in life cycle impact assessment: findings from the Basel Guidance Workshop

Peter Fantke et al.

INTERNATIONAL JOURNAL OF LIFE CYCLE ASSESSMENT (2015)

Article Engineering, Environmental

Multimedia Modeling of Engineered Nanoparticles with SimpleBox4nano: Model Definition and Evaluation

Johannes A. J. Meesters et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2014)

Article Engineering, Environmental

Multimedia Environmental Distribution of Engineered Nanomaterials

Haoyang Haven Liu et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2014)

Article Engineering, Environmental

New Perspectives on Nanomaterial Aquatic Ecotoxicity: Production Impacts Exceed Direct Exposure Impacts for Carbon Nanotoubes

Matthew J. Eckelman et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2012)

Editorial Material Engineering, Environmental

Microplastic in Terrestrial Ecosystems and the Soil?

Matthias C. Rillig

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2012)

Article Engineering, Environmental

Spatially explicit fate factors of phosphorous emissions to freshwater at the global scale

Roel J. K. Helmes et al.

INTERNATIONAL JOURNAL OF LIFE CYCLE ASSESSMENT (2012)

Article Engineering, Environmental

Environmental Impact of Pyrolysis of Mixed WEEE Plastics Part 2: Life Cycle Assessment

Sue M. Alston et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2011)

Article Engineering, Environmental

Accumulation of Microplastic on Shorelines Woldwide: Sources and Sinks

Mark Anthony Browne et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2011)

Article Engineering, Environmental

USEtox fate and ecotoxicity factors for comparative assessment of toxic emissions in life cycle analysis: sensitivity to key chemical properties

Andrew D. Henderson et al.

INTERNATIONAL JOURNAL OF LIFE CYCLE ASSESSMENT (2011)

Article Engineering, Environmental

USES-LCA 2.0-a global nested multi-media fate, exposure, and effects model

Rosalie van Zelm et al.

INTERNATIONAL JOURNAL OF LIFE CYCLE ASSESSMENT (2009)

Article Engineering, Environmental

USEtox-the UNEP-SETAC toxicity model: recommended characterisation factors for human toxicity and freshwater ecotoxicity in life cycle impact assessment

Ralph K. Rosenbaum et al.

INTERNATIONAL JOURNAL OF LIFE CYCLE ASSESSMENT (2008)

Article Environmental Sciences

Calculating life-cycle assessment effect factors from potentially affected fraction-based ecotoxicological response functions

D Van de Meent et al.

ENVIRONMENTAL TOXICOLOGY AND CHEMISTRY (2005)

Review Environmental Sciences

Life cycle assessment Part 1: Framework, goal and scope definition, inventory analysis, and applications

G Rebitzer et al.

ENVIRONMENT INTERNATIONAL (2004)