Related references
Note: Only part of the references are listed.
Article
Automation & Control Systems
Yao Wang et al.
Summary: A novel finite-time control method with q-axis current constrained based on time-varying second-order nonlinear disturbance observer was investigated to improve the overcurrent protection and disturbance rejection performance of permanent magnet synchronous motor system. The proposed control method can achieve high-precision tracking performance while protecting the system from overcurrent damage.
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS
(2022)
Article
Engineering, Electrical & Electronic
Simon Foitzik et al.
Summary: The article introduces a fault tolerant control scheme that reduces the heat of an inter-turn fault by adapting the operating point. The control strategy is based on the hyperbolas of constant torque and a linear time-invariant system description. Machine learning regression and a 3D lumped-parameter model are used for heat estimation and thermal effectiveness evaluation, respectively.
IET ELECTRIC POWER APPLICATIONS
(2022)
Article
Automation & Control Systems
Shubo Wang et al.
Summary: This paper proposes a novel robust tracking control strategy based on funnel control for servo drive systems with unknown disturbances. The modified funnel variable is defined and incorporated into the control design to ensure the tracking error remains within a prescribed boundary. A robust integral of the sign of the error (RISE) controller based on the funnel variable is proposed to reject bounded disturbances in servo drive systems. Additionally, a compensation technique is used to reduce sensor noise in the developed controller. The proposed robust controller guarantees asymptotic tracking control performance with external disturbances, and the convergence of the closed-loop system is analyzed using Lyapunov stability theory. Comparative numerical and experimental results are provided for the servo drive system.
Article
Automation & Control Systems
F. Vijay Amirtha Raj et al.
Summary: PMSM is a dynamic motion control product with advantages of low rotor inertia, high efficiency, and high power density. To address issues like external load disturbances and parameter deviations, researchers introduced the PSMFCDCNLSTFC model, which improves the performance and efficiency of PMSM.
INTERNATIONAL JOURNAL OF FUZZY SYSTEMS
(2022)
Article
Engineering, Electrical & Electronic
Yongxiang Xu et al.
Summary: An improved deadbeat predictive current control (DPCC) method is proposed in this article to enhance the control performance of modern high-precision permanent-magnet synchronous motor (PMSM) system. The method utilizes integral sliding mode control (ISMC) theory for disturbance elimination and avoids the side effects of traditional methods. Experimental results confirm the effectiveness of the proposed method in controlling PMSM systems.
IEEE TRANSACTIONS ON POWER ELECTRONICS
(2022)
Article
Automation & Control Systems
Qiang Zeng et al.
Summary: This article addresses the event-triggered based adaptive finite-time control problem for active suspension systems over the resource-constrained controller area network (CAN) in automotive systems. The aim is to reduce the communication burden from the CAN and improve the suspension performances. A novel finite-time performance function and an event-triggered mechanism are proposed to ensure ride comfort, suspension space limitation, and handling stability.
IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS
(2022)
Article
Engineering, Mechanical
Zizhen Qiu et al.
Summary: This study focuses on the permanent magnet synchronous motor (PMSM) for new energy vehicles, analysing the causes and mechanisms of electromagnetic vibro-acoustics of fractional-slot PMSM. A new control strategy is proposed to suppress torque ripple and reduce electromagnetic noise, and the band-stop filter method is introduced to quantitatively analyse the influence of controller parameters. The relationship among the initial phase angle, frequency, and amplitude of the electromagnetic force and injected harmonic voltage of the stator is studied using the finite element method.
INTERNATIONAL JOURNAL OF HEAVY VEHICLE SYSTEMS
(2022)
Article
Computer Science, Theory & Methods
Xingling Shao et al.
Summary: This paper investigates an improved fuzzy wavelet neural control scheme for MEMS gyroscope, using a hysteresis quantizer (HQ) and modified prescribed performance control (MPPC) to achieve better output tracking and uncertainty identification.
FUZZY SETS AND SYSTEMS
(2021)
Article
Computer Science, Artificial Intelligence
Xingling Shao et al.
Summary: This paper proposes an event-triggered neural intelligent control for uncertain nonlinear systems with guaranteed specified-time behaviors, addressing communication resource constraints and providing design flexibility. A minimum-learning-parameter-based state observer is developed to estimate unavailable states and uncertainties, a modified barrier Lyapunov function is constructed to balance sampling cost and tracking performance, and an event-triggered neural output feedback control strategy is synthesized within the framework of dynamic surface control. The efficiency and superiority of the proposed intelligent control scheme are validated through an application on control design for a micro-electro-mechanical system gyroscope.
NEURAL COMPUTING & APPLICATIONS
(2021)
Article
Automation & Control Systems
Chen Dai et al.
Summary: This paper investigates the speed regulation problem of permanent magnet synchronous motor system under a noncascade structure. A novel current-constrained control algorithm is proposed to tackle both the current constraint and unmatched disturbances simultaneously. Numerical and experimental tests validate that the proposed control approach achieves promising speed tracking performance and guarantees the current constraint in the presence of unmatched disturbances.
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS
(2021)
Article
Automation & Control Systems
Zhenxiang Lv et al.
Summary: This paper introduces an adaptive fuzzy finite-time dynamic surface control method for PMSMs with full-state constraints. By utilizing finite-time stability theory and constructing a log-type barrier Lyapunov function, the control approach ensures constraint of state variables in predefined compact sets. The use of fuzzy logic systems and first-order filter addresses the complexity issue of differentiation in backstepping approach, achieving fast tracking effect and boundedness of signals. Simulation results comparison highlights the superiority of the proposed design scheme.
INTERNATIONAL JOURNAL OF FUZZY SYSTEMS
(2021)
Article
Physics, Multidisciplinary
Ruobing Li et al.
Summary: In this paper, the U-model, known for its property of facilitating nonlinearity dynamic inversion/cancellation, has been incorporated into Disturbance Observer-Based control methods to enhance the performance of nonlinear systems. A general DOB based U-Control framework was proposed to improve disturbance attenuation capability and establish global exponential stability independently of disturbances and uncertainties. Simulation experiments on Wind Energy Conversion Systems (WECS) and Permanent Magnet Synchronous Motors (PMSM) demonstrated the effectiveness of the proposed method.
Article
Physics, Multidisciplinary
Mei Liu et al.
Summary: This paper investigates the fixed-time synchronization problem for delayed dynamical complex networks and proposes new results and methods to achieve fixed-time synchronization. By designing adaptive controllers and discontinuous feedback controllers, fixed-time synchronization can be achieved by adjusting the main control parameters. The introduction of a new theorem aims to reduce conservatism in existing work, including conditions and synchronization time estimates.
Article
Energy & Fuels
Qiankang Hou et al.
Summary: This paper aims to enhance the performance of the PMSM speed regulation system by combining a novel disturbance observer with the super-twisting sliding mode technique. The introduced composite controller effectively reduces the gain of the sliding mode controller, leading to improved system performance, as verified by simulation and experimental results.
IEEE TRANSACTIONS ON ENERGY CONVERSION
(2021)
Article
Automation & Control Systems
Lakshmanan Shanmugam et al.
Summary: This paper introduces a novel interval type-2 fuzzy-based sampled-data controller for nonlinear systems using fuzzy Lyapunov functional, with sufficient conditions derived from a time-dependent Lyapunov-Krasovskii functional with membership functions. The proposed method is validated numerically with a nonlinear permanent magnet synchronous motors model, and its superiority is demonstrated through comparison with existing methods.
IEEE TRANSACTIONS ON SYSTEMS MAN CYBERNETICS-SYSTEMS
(2021)
Article
Computer Science, Artificial Intelligence
Yi Shi et al.
Summary: This study proposes a neural adaptive appointed-time control for flexible air-breathing hypersonic vehicles, which reduces computational burden for online learning while achieving competitive estimation accuracy. The method combines a neural estimator and event-triggered control to achieve precise control of the aircraft, with simulations verifying its effectiveness.
NEURAL COMPUTING & APPLICATIONS
(2021)
Article
Engineering, Electrical & Electronic
Hyung-June Cho et al.
Summary: This article analyzes the instantaneous flux trajectory and voltage vector of a permanent-magnet synchronous machine in the six-step operation, proposing a time-optimal voltage vector transition scheme to enhance dynamic performance significantly. Simulation and experimental results validate the effectiveness of the proposed scheme, showing over 50% reduction in settling time and 60% reduction in peak current compared to conventional methods.
IEEE TRANSACTIONS ON POWER ELECTRONICS
(2021)
Article
Engineering, Electrical & Electronic
Bo Xu et al.
Summary: A compound control method using an improved NFTSMC and disturbance observer compensation techniques has been developed to enhance the anti-disturbance performance of PMSM drives. The new NSMRL allows for chattering reduction on control output while maintaining high tracking performance, and the introduction of SMDO further improves the anti-disturbance performance. Both simulation and experimental results demonstrate better suppression of chattering effect, fast dynamic response, and disturbance rejection ability with the proposed control method.
IEEE TRANSACTIONS ON TRANSPORTATION ELECTRIFICATION
(2021)
Article
Automation & Control Systems
Cungen Liu et al.
Summary: This paper introduces an adaptive finite-time fuzzy funnel controller for nonaffine nonlinear systems using backstepping. Unknown packaged nonlinear functions are approximated to ensure boundedness of tracking error and signals in the closed-loop system are proven to be semi-globally practically finite-time bounded (SGPFB). Simulations demonstrate the effectiveness of the controller design scheme.
IEEE TRANSACTIONS ON SYSTEMS MAN CYBERNETICS-SYSTEMS
(2021)
Article
Automation & Control Systems
R. Vadivel et al.
Summary: This article presents a dynamic model of PMSM based on Takagi-Sugeno fuzzy model and a reliable H-infinity control method to enhance the performance of PMSM. By taking into account load torque variation and stochastic actuator faults, the robust asymptotic stability of the closed-loop PMSM is ensured.
IEEE TRANSACTIONS ON SYSTEMS MAN CYBERNETICS-SYSTEMS
(2021)
Article
Engineering, Electrical & Electronic
Dongliang Ke et al.
Summary: An ESMO with HPRL is proposed in this article to improve the performance and robustness of PCC. HPRL based on the Hurwitz criterion achieves high convergence rate and settles chattering. Experimental results validate high robustness and excellent performance in PMSM systems compared with conventional methods.
IEEE TRANSACTIONS ON POWER ELECTRONICS
(2021)
Article
Chemistry, Physical
Donghai Hu et al.
Summary: The study focused on the air gaps magnetic field distortion issue of super-high-speed permanent magnet synchronous motors (SHSPMSM) and proposed a transient current injection control method to optimize speed regulation response capacity, with simulation and experimental results demonstrating the effectiveness of the method.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
(2021)
Article
Engineering, Aerospace
Samith Sirimanna et al.
Summary: Electric aircraft propulsion systems require consideration of the performance of different components in the electric drive-train system, including the electric motor, gear box, and motor drive. This paper presents a quantitative study comparing the performance of different motor types, confirming the overall advantage of PM motor topologies in aircraft propulsion.
JOURNAL OF PROPULSION AND POWER
(2021)
Article
Engineering, Electrical & Electronic
Haibin Wang et al.
Summary: This study proposes a novel event-based prescribed performance control scheme for trajectory tracking control of dynamic positioning vessels under unknown and time-varying sea loads. By introducing an integral disturbance observer and a new-type performance function, a dynamic event-triggered control policy is designed in the PPC framework to achieve the assigned trajectory tracking mission in an appointed-time with guaranteed performance bounds and less operating frequency of the actuator. The derived controller achieves a trade-off between tracking performance and actuators' operating frequency, which is important for practical engineering applications.
IEEE TRANSACTIONS ON CIRCUITS AND SYSTEMS II-EXPRESS BRIEFS
(2021)
Article
Automation & Control Systems
Hongyun Yue et al.
JOURNAL OF THE FRANKLIN INSTITUTE-ENGINEERING AND APPLIED MATHEMATICS
(2020)
Article
Automation & Control Systems
Jialei Bao et al.
INTERNATIONAL JOURNAL OF ADAPTIVE CONTROL AND SIGNAL PROCESSING
(2020)
Article
Automation & Control Systems
Xuebo Yang et al.
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS
(2020)
Article
Engineering, Electrical & Electronic
Chuanqiang Lian et al.
IET POWER ELECTRONICS
(2020)
Article
Automation & Control Systems
Chao Gong et al.
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS
(2020)
Article
Engineering, Electrical & Electronic
Yang Ge et al.
JOURNAL OF POWER ELECTRONICS
(2020)
Article
Engineering, Mechanical
Mingzhu Xu et al.
INTERNATIONAL JOURNAL OF VEHICLE DESIGN
(2020)
Article
Engineering, Electrical & Electronic
Haitao Xing et al.
IEEE TRANSACTIONS ON VEHICULAR TECHNOLOGY
(2019)
Article
Automation & Control Systems
Wenjie Si et al.
INTERNATIONAL JOURNAL OF SYSTEMS SCIENCE
(2019)
Article
Automation & Control Systems
Kai Zhao et al.
Article
Engineering, Electrical & Electronic
Nihad Ali et al.
JOURNAL OF ELECTRICAL ENGINEERING & TECHNOLOGY
(2019)
Article
Automation & Control Systems
Yajie Jiang et al.
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS
(2019)
Article
Automation & Control Systems
Arie Levant et al.
INTERNATIONAL JOURNAL OF CONTROL
(2018)
Article
Automation & Control Systems
Fengzhong Li et al.
SIAM JOURNAL ON CONTROL AND OPTIMIZATION
(2018)
Article
Automation & Control Systems
Fang Wang et al.
IEEE TRANSACTIONS ON CYBERNETICS
(2018)
Article
Automation & Control Systems
Zewei Zheng et al.
INTERNATIONAL JOURNAL OF ROBUST AND NONLINEAR CONTROL
(2018)
Article
Automation & Control Systems
Shubo Wang et al.
IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING
(2017)
Article
Automation & Control Systems
Qixin Zhu et al.
INTERNATIONAL JOURNAL OF CONTROL AUTOMATION AND SYSTEMS
(2017)
Article
Automation & Control Systems
Huanqing Wang et al.
IEEE TRANSACTIONS ON SYSTEMS MAN CYBERNETICS-SYSTEMS
(2017)
Article
Automation & Control Systems
CJ Qian et al.
SYSTEMS & CONTROL LETTERS
(2001)
Article
Automation & Control Systems
D Swaroop et al.
IEEE TRANSACTIONS ON AUTOMATIC CONTROL
(2000)
