☆ 4.7 Article

A novel enhanced anti-tetra-missing rib auxetic structure with tailorable in-plane mechanical properties

ENGINEERING STRUCTURES (2022)

Related references

Note: Only part of the references are listed.

Article Mechanics

Design and analysis of an auxetic metamaterial with tuneable stiffness

Yi Zhang et al.

Summary: Auxetic materials have weaker stiffness compared to solid structures due to internal holes, but a new methodology using variable stiffness scale factor (VSF) has been proposed to enhance their stiffness. Experimental investigation showed that the designed VSF can be effectively tuned by changing the height of the deformation area.

COMPOSITE STRUCTURES (2022)

Add to Collection

Article Mechanics

A novel auxetic chiral lattice composite: Experimental and numerical study

Xue Gang Zhang et al.

Summary: This paper investigates a new method to enhance the mechanical properties of auxetic composites by designing joints of frames. Through experiments and numerical analysis, optimizing the design of joints can improve energy absorption capacity and auxetic behavior.

COMPOSITE STRUCTURES (2022)

Add to Collection

Article Mechanics

Stiffened star-shaped auxetic structure with tri-directional symmetry

Krishna Prasath Logakannan et al.

Summary: In this work, a new auxetic structure with rigid diamonds was designed to enhance the strength and symmetry of a star-shaped auxetic structure. The new structure showed better specific plateau stress and the Poisson's ratio can be adjusted by changing the angle of inclined members, as revealed by experimental and theoretical analysis.

COMPOSITE STRUCTURES (2022)

Add to Collection

Article Mechanics

Mechanical properties of foam-filled hexagonal and re-entrant honeycombs under uniaxial compression

Hui Chen Luo et al.

Summary: Filling slow recovery foam into re-entrant honeycombs can prevent lateral buckling, increase stiffness and energy absorption capacity, showing promising potential in protective engineering.

COMPOSITE STRUCTURES (2022)

Add to Collection

Review Engineering, Multidisciplinary

Manufacturing, characteristics and applications of auxetic foams: A state-of-the-art review

Wei Jiang et al.

Summary: Auxetic foams exhibit unique mechanical properties and multiphysics characteristics, making them potential candidates for applications in biomedicine, aerospace, and smart sensing. However, challenges such as complex fabrication and lacking stability hinder their practical applications, requiring further research and development to overcome these barriers.

COMPOSITES PART B-ENGINEERING (2022)

Add to Collection

Article Engineering, Civil

Paper tube-guided blast response of sandwich panels with auxetic re-entrant and regular hexagonal honeycomb cores - An experimental study

Ganchao Chen et al.

Summary: This paper investigates the dynamic behavior and failure modes of metallic sandwich panels with different auxetic and non-auxetic cores under blast tests. The study reveals the effects of blast impulse and core density on the panel blast resistance and failure mechanisms. The research provides valuable references for the design of auxetic honeycomb sandwich core in protection applications.

ENGINEERING STRUCTURES (2022)

Add to Collection

Review Instruments & Instrumentation

On the design workflow of auxetic metamaterials for structural applications

Matthew Wallbanks et al.

Summary: Auxetic metamaterials exhibit the unexpected behavior of negative Poisson's ratio, expanding transversely when stretched longitudinally, which has applications in energy absorption, sensors, smart filters, vibration isolation, and medical fields. The potential of these structures can be further explored through additive manufacturing. There is currently a lack of guidance on the design of these structures, and this paper provides insights into the state-of-the-art and design approaches.

SMART MATERIALS AND STRUCTURES (2022)

Add to Collection

Article Engineering, Civil

Mechanical properties of foam-filled auxetic circular tubes: Experimental and numerical study

Xin Ren et al.

Summary: By filling rigid polyurethane foam into hollow auxetic tubes, this study successfully enhanced the energy absorption capacity. The composite foam-filled auxetic tubes demonstrated superior energy absorption compared to single foams and hollow tubes. Geometrical parameters such as wall thickness and ellipticity significantly impact the structural deformation mode and energy absorption of the FFATs.

THIN-WALLED STRUCTURES (2022)

Add to Collection

Article Construction & Building Technology

Mechanical properties of concrete composites with auxetic single and layered honeycomb structures

Ru Zhong et al.

Summary: Auxetic materials and honeycomb sandwich structures exhibit desirable mechanical properties, and a novel concrete composite with auxetic layered honeycomb has been designed and investigated for exploring their load-bearing performance. The results show that the layered structure has higher initial peak stress, stable platform stress, improved shear resistance, and overall stability.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Add to Collection

Article Engineering, Mechanical

Static and dynamic properties of a perforated metallic auxetic metamaterial with tunable stiffness and energy absorption

Yi Zhang et al.

Summary: This study examines the static performance and energy absorption of 2D metallic auxetic metamaterials designed by tuning densification strain. The concept of variable stiffness factor (VSF) is extended to variable energy factor (VEF) for tunable energy absorption. Results show that the designed structure has the desired mechanical properties and effective energy absorption under different crushing velocities.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2022)

Add to Collection

Article Engineering, Mechanical

Design and mechanical characteristics of auxetic metamaterial with tunable stiffness

Xian Cheng et al.

Summary: Auxetic materials are mechanical metamaterials that exhibit lateral expansion under tension and contraction under compression. Enhancing the stiffness of these materials is a focus of research to expand their potential applications. This study designs re-entrant unit cells with variable stiffness factors and verifies their accuracy through experimental and numerical analyses. The findings demonstrate that the compression points of the proposed structures can be quantitatively tuned, providing a new method for optimizing the design of unit cells with negative Poisson's ratio.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2022)

Add to Collection

Article Engineering, Civil

Experimental and numerical analysis of mounting force of auxetic dowels for furniture joints

Tolga Kuskun et al.

Summary: This study designed and manufactured different types of auxetic dowels, analyzing their installation force, contact pressure, and friction coefficient in particleboard. The auxetic dowels have negative Poisson's ratios, lower installation force than non-auxetic dowels, and lower contact pressures on their surface.

ENGINEERING STRUCTURES (2021)

Add to Collection

Article Engineering, Civil

Bending response and energy absorption of sandwich beams with novel auxetic honeycomb core

Xuan Zhao et al.

Summary: The study focuses on the bending response and energy absorption of the star-triangular honeycomb core (STH-C) and sandwich beam with an STH-C (STH-SW), showing that structural parameters significantly influence the load-bearing capacity of the sandwich beams, especially the thickness-to-length ratio t/l.

ENGINEERING STRUCTURES (2021)

Add to Collection

Article Engineering, Civil

Based on auxetic foam: A novel type of seismic metamaterial for Lamb waves

Ting Ting Huang et al.

Summary: Seismic metamaterial (SM) has gained significant attention in vibration isolation and damping due to its wave manipulation and bandgap properties. A novel 2D SM composed of auxetic foam and steel is proposed to attenuate seismic waves at ultra-low frequencies. Numerical simulations show that modifying the parameters of the components can enhance the bandgap and effectively attenuate seismic waves, aiming to cover the seismic peak spectrum at 2 Hz.

ENGINEERING STRUCTURES (2021)

Add to Collection

Article Engineering, Civil

A novel buckling-restrained brace with auxetic perforated core: Experimental and numerical studies

Yi Zhang et al.

Summary: A novel perforated negative Poisson's ratio core buckling-restrained brace was designed and studied to explore the seismic performance of auxetic metamaterials, revealing their potential for seismic mitigation applications.

ENGINEERING STRUCTURES (2021)

Add to Collection

Article Engineering, Mechanical

Isogeometric shape optimization of missing rib auxetics with prescribed negative Poisson's ratio over large strains using genetic algorithm

Deepak Kumar et al.

Summary: This paper proposes an isogeometric shape optimization framework using genetic algorithm to design 2D auxetic structures with prescribed Poisson's ratio in the nonlinear deformation regime. The versatility of the framework is demonstrated through optimization of a missing rib structure under different loading conditions, showing manufacturability using NURBS and PolyJet 3D printing. Experimental results match well with numerical predictions, highlighting the need for further investigations on compression behavior in very flexible materials.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

Add to Collection

Article Chemistry, Physical

Idealized 3D Auxetic Mechanical Metamaterial: An Analytical, Numerical, and Experimental Study

Naeim Ghavidelnia et al.

Summary: In this study, an auxetic metamaterial structure known as idealized 3D re-entrant structure was analyzed, numerically calculated, and experimentally tested for its mechanical properties and Poisson's ratio using different methods. The results showed that the structure's Poisson's ratio is most influenced by the angle theta related to tension-dominated struts, while angle phi related to compression-dominated struts had the least influence, with compression-dominated struts providing strength and stiffness to the structure. Additionally, it was demonstrated that the structure could potentially have a zero Poisson's ratio within a specific range of theta and phi angles.

MATERIALS (2021)

Add to Collection

Article Mechanics

Novel Isotropic Anti-Tri-Missing Rib Auxetics with Prescribed In-Plane Mechanical Properties Over Large Deformations

Yilin Zhu et al.

Summary: A novel anti-tri-missing rib structure was proposed in this study, with an enhanced design to improve the auxetic behavior and in-plane isotropy achieved by increasing ligament angle and triangle reinforcement. The results show constant NPR over a large strain range at specific orientations, with improved tunable elastic modulus and controllable isotropic constant NPRs without compromising overall stiffness.

INTERNATIONAL JOURNAL OF APPLIED MECHANICS (2021)

Add to Collection

Article Engineering, Multidisciplinary

A novel combined auxetic tubular structure with enhanced tunable stiffness

Xiang Yu Zhang et al.

Summary: The study introduced a novel combined tubular structure with tunable stiffness to improve bearing capacity and stability by adjusting the length of the central column. Experimental results verified the effectiveness of the finite element model and examined the compression process and stress-strain curve of the tubular structure.

COMPOSITES PART B-ENGINEERING (2021)

Add to Collection

Review Engineering, Civil

Design, manufacturing and applications of auxetic tubular structures: A review

Chen Luo et al.

Summary: This paper extensively reviews the design methods, advanced manufacturing technologies, mechanical properties, and potential applications of auxetic tubular structures. Furthermore, it discusses the challenges and opportunities in this field to inspire future research work.

THIN-WALLED STRUCTURES (2021)

Add to Collection

Article Engineering, Civil

A novel type of tubular structure with auxeticity both in radial direction and wall thickness

Xiang Yu Zhang et al.

Summary: A novel tubular structure with auxeticity in both wall thickness and radial direction has been proposed, showing good stability under axial compression. The innovative feature lies in opposite deformation directions of its inner and outer diameter. This structure's closed tube wall surfaces broaden its applications in civil and mechanical engineering fields.

THIN-WALLED STRUCTURES (2021)

Add to Collection

Article Mechanics

A novel design method for 3D positive and negative Poisson's ratio material based on tension-twist coupling effects

Shengyu Duan et al.

COMPOSITE STRUCTURES (2020)

Add to Collection

Article Mechanics

Auxeticity of monoclinic tetrachiral honeycombs

X. Lu et al.

COMPOSITE STRUCTURES (2020)

Add to Collection

Article Instruments & Instrumentation

Enhanced hexa-missing rib auxetics for achieving targeted constant NPR and in-plane isotropy at finite deformation

Yilin Zhu et al.

SMART MATERIALS AND STRUCTURES (2020)

Add to Collection

Review Materials Science, Multidisciplinary

Progress in Auxetic Mechanical Metamaterials: Structures, Characteristics, Manufacturing Methods, and Applications

Zhenwei Wang et al.

ADVANCED ENGINEERING MATERIALS (2020)

Add to Collection

Article Mechanics

Study on the mechanism of band gap and directional wave propagation of the auxetic chiral lattices

Kai Zhang et al.

COMPOSITE STRUCTURES (2020)

Add to Collection

Article Engineering, Civil

In-plane elastic properties of a 2D chiral cellular structure with V-shaped wings

Weidong Liu et al.

ENGINEERING STRUCTURES (2020)

Add to Collection

Article Engineering, Mechanical

Reversible energy absorbing meta-sandwiches by FDM 4D printing

M. Bodaghi et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)

Add to Collection

Review Chemistry, Analytical

Cellular Auxetic Structures for Mechanical Metamaterials: A Review

Parth Uday Kelkar et al.

SENSORS (2020)

Add to Collection

Article Engineering, Biomedical

Mechanical performance of auxetic meta-biomaterials

H. M. A. Kolken et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2020)

Add to Collection

Article Engineering, Multidisciplinary

Programmable soft bending actuators with auxetic metamaterials

Pan Qi et al.

SCIENCE CHINA-TECHNOLOGICAL SCIENCES (2020)

Add to Collection

Review Materials Science, Biomaterials

The use of auxetic materials in tissue engineering

Paul Mardling et al.

BIOMATERIALS SCIENCE (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Hierarchical hexachiral auxetics for large elasto-plastic deformation

Yilin Zhu et al.

MATERIALS RESEARCH EXPRESS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Two nature-mimicking auxetic materials with potential for high energy absorption

Seung Chul Han et al.

MATERIALS TODAY (2019)

Add to Collection

Article Engineering, Civil

Development and performance evaluation of large-scale auxetic protective systems for localised impulsive loads

Alex Remennikov et al.

INTERNATIONAL JOURNAL OF PROTECTIVE STRUCTURES (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Auxetic Mechanical Metamaterials to Enhance Sensitivity of Stretchable Strain Sensors

Ying Jiang et al.

ADVANCED MATERIALS (2018)

Add to Collection

Article Mechanics

Mechanical properties of anti-tetrachiral auxetic stents

Wenwang Wu et al.

COMPOSITE STRUCTURES (2018)

Add to Collection

Article Instruments & Instrumentation

Auxetic hexachiral structures with wavy ligaments for large elasto-plastic deformation

Yilin Zhu et al.

SMART MATERIALS AND STRUCTURES (2018)

Add to Collection

Review Instruments & Instrumentation

Auxetic metamaterials and structures: a review

Xin Ren et al.

SMART MATERIALS AND STRUCTURES (2018)

Add to Collection

Article Multidisciplinary Sciences

3D Printed Auxetic Mechanical Metamaterial with Chiral Cells and Re-entrant Cores

Yunyao Jiang et al.

SCIENTIFIC REPORTS (2018)

Add to Collection

Article Materials Science, Multidisciplinary

3D Printed Chiral Cellular Solids with Amplified Auxetic Effects Due to Elevated Internal Rotation

Yunyao Jiang et al.

ADVANCED ENGINEERING MATERIALS (2017)

Add to Collection

Article Instruments & Instrumentation

Auxetic behavior and acoustic properties of microstructured piezoelectric strain sensors

Maria Laura De Bellis et al.

SMART MATERIALS AND STRUCTURES (2017)

Add to Collection

Article Mechanics

Impact and close-in blast response of auxetic honeycomb-cored sandwich panels: Experimental tests and numerical simulations

Chang Qi et al.

COMPOSITE STRUCTURES (2017)

Add to Collection

Article Mechanics

Elastic properties of chiral, anti-chiral, and hierarchical honeycombs: A simple energy-based approach

Davood Mousanezhad et al.

THEORETICAL AND APPLIED MECHANICS LETTERS (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Topology Optimized Architectures with Programmable Poisson's Ratio over Large Deformations

Anders Clausen et al.

ADVANCED MATERIALS (2015)

Add to Collection

Article Engineering, Multidisciplinary

Influence of translational disorder on the mechanical properties of hexachiral honeycomb systems

Luke Mizzi et al.

COMPOSITES PART B-ENGINEERING (2015)

Add to Collection

Article Physics, Condensed Matter

Poisson's ratio of rectangular anti-chiral structures with size dispersion of circular nodes

A. A. Pozniak et al.

PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS (2014)

Add to Collection

Article Multidisciplinary Sciences

Engineering the shape and structure of materials by fractal cut

Yigil Cho et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2014)

Add to Collection

Article Materials Science, Textiles

Auxetic materials and their potential applications in textiles

Zhengyue Wang et al.

TEXTILE RESEARCH JOURNAL (2014)

Add to Collection

Article Instruments & Instrumentation

Homogenized mechanical properties of auxetic composite materials in finite-strain elasticity

Dennis M. Kochmann et al.

SMART MATERIALS AND STRUCTURES (2013)

Add to Collection

Review Materials Science, Multidisciplinary

Seeing auxetic materials from the mechanics point of view: A structural review on the negative Poisson's ratio

Yunan Prawoto

COMPUTATIONAL MATERIALS SCIENCE (2012)

Add to Collection

Article Materials Science, Multidisciplinary

A Gradient Cellular Core for Aeroengine Fan Blades Based on Auxetic Configurations

C. Lira et al.

JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2011)

Add to Collection

Article Materials Science, Composites

Elastic constants of 3-, 4-and 6-connected chiral and anti-chiral honeycombs subject to uniaxial in-plane loading

A. Alderson et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2010)

Add to Collection

Article Engineering, Electrical & Electronic

Auxetic materials for bioprostheses [In the Spotlight]

Fabrizio Scarpa

IEEE SIGNAL PROCESSING MAGAZINE (2008)

Add to Collection

Article Materials Science, Multidisciplinary

Novel honeycombs with auxetic behaviour

N Gaspar et al.

ACTA MATERIALIA (2005)

Add to Collection

Article Materials Science, Multidisciplinary

A novel mechanism for generating auxetic behaviour in reticulated foams: Missing rib foam model

CW Smith et al.

ACTA MATERIALIA (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.