☆ 4.7 Article

Facile fabrication of intercalation-type pseudocapacitive S-Ti3C2Tx/PANI/F-Ti3C2Tx cathode for asymmetric capacitive deionization

DESALINATION (2022)

Related references

Note: Only part of the references are listed.

Article Engineering, Environmental

Nanoarchitectonics from 2D to 3D: MXenes-derived nitrogen-doped 3D nanofibrous architecture for extraordinarily-fast capacitive deionization

Zibiao Ding et al.

Summary: The study successfully addressed the intrinsic limitations of 2D nanosheets by synthesizing nitrogen-doped three-dimensional nanofibrous structures (N-TNF), achieving efficient electrochemical desalination. N-TNF exhibited excellent electrochemical performance and stability, showing ultrahigh desalination rate and capacity.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Engineering, Chemical

Ferroferric oxide@titanium carbide MXene heterostructure with enhanced sodium storage ability for efficient hybrid capacitive deionization

Kai Wang et al.

Summary: By loading Fe3O4 nanoparticles onto Ti3C2Tx MXene, a Fe3O4@Ti3C2Tx heterostructure with remarkable desalination capacity and superior cycling performance was obtained.

DESALINATION (2022)

Add to Collection

Article Engineering, Chemical

Particle size distribution influence on capacitive deionization: Insights for electrode preparation

Yuan Zhang et al.

Summary: Water desalination technique, especially capacitive deionization (CDI), is crucial in addressing the global freshwater shortage. CDI has gained attention for its use of low-cost electrode materials and high energy efficiency. However, the importance of proper electrode and parameter designs for desalination performance has been overlooked.

DESALINATION (2022)

Add to Collection

Article Materials Science, Ceramics

Subsize Ti3C2Tx derived from molten-salt synthesized Ti3AlC2 for enhanced capacitive deionization

Bingbing Chen et al.

Summary: Subsize and Na+ intercalated Ti3C2Tx (Na+-Ti3C2Tx-MS) was prepared by HF etching KCl-assisted molten-salt synthesized Ti3AlC2 and following NaOH treatment. Na+-Ti3C2Tx-MS achieved high electrosorption capacity and charge efficiency during CDI process, showing stable desalination performance.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Engineering, Environmental

Highly flexible, self-healable and conductive poly(vinyl alcohol)/Ti3C2Tx MXene film and it's application in capacitive deionization

Jiayi Ai et al.

Summary: This study reports a new self-healing material used in Capacitive deionization, which autonomously repairs damaged interfaces and shows good mechanical and electrochemical performance. The material quickly restores its shape in real application environments and exhibits good salt adsorption capacity and cycling stability in Capacitive deionization.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Engineering, Environmental

Ti3C2 MXenes-derived NaTi2(PO4)3/MXene nanohybrid for fast and efficient hybrid capacitive deionization performance

Zeqiu Chen et al.

Summary: The design and synthesis of NTP/MXene nanohybrid with improved electrical conductivity and enhanced sodium-insertion ability led to extraordinary desalination performance, showing promising applications for practical HCDI with a maximum deionization rate of 29.6 mg g(-1) min(-1, an ultrahigh desalination capacity of 128.6 mg g(-1), and stable cycling desalination ability.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Engineering, Chemical

Block copolymer coated carbon nanotube membrane anodes for enhanced and multipurpose hybrid capacitive deionization

Sen Xiong et al.

Summary: In this study, a pH-responsive block copolymer (BCP) was combined with selective swelling to improve the adsorption capacity and stability of carbon nanotube membranes used in capacitive deionization processes. The BCP-coated electrodes showed enhanced attraction between electrode and anions, leading to improved performance in the hybrid CDI (HCDI) module. The combination of BCPs and selective swelling demonstrated significant enhancement in removal efficiencies towards NaCl and NaH2PO4, as well as improved chemical and mechanical stabilities of the anodes.

DESALINATION (2021)

Add to Collection

Article Engineering, Environmental

2D Ti3C2Tx MXene nanosheets coated cellulose fibers based 3D nanostructures for efficient water desalination

Shoaib Anwer et al.

Summary: A novel and facile synthesis strategy was introduced to design 2D MXene nanosheets coated cellulose fibers based 3D nanostructures, overcoming the drawbacks in commonly used CDI electrodes and MXene based electrodes. The CLF@Ti3C2Tx based active electrodes exhibited good specific capacitance and high salt adsorption capacitance in 1M sodium chloride electrolyte, with considerable cycling stability.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Chemistry, Physical

One-pot synthesis of activated carbon decorated with ZnO nanoparticles for capacitive deionization application

Ahmed S. Yasin et al.

Summary: A ZnO nanoparticles-decorated activated carbon (ACZn) nanocomposite was successfully prepared for efficient capacitive deionization. The ACZn nanocomposite showed higher specific capacitance and improved desalination performance compared to activated carbon alone.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Enhanced capacitive deionization performance of activated carbon derived from coconut shell electrodes with low content carbon nanotubes?graphene synergistic hybrid additive

Thi Thom Nguyen et al.

Summary: In this study, a cost-effective and high-performance electrode for brackish water capacitive deionization (CDI) desalination was developed by dispersing graphene/carbon nanotubes conducting hybrid in coconut shell derived activated carbon. The hybrid additive at 1 wt% showed more effective performance than single additives, demonstrating synergistic effects both technically and economically. This is the first study to report the application of ultra-low content AC/CNTs hybrid in AC based CDI electrodes.

MATERIALS LETTERS (2021)

Add to Collection

Review Environmental Sciences

Pushingmicrobial desalination cells towards field application: Prevailing challenges, potential mitigation strategies, and future prospects

Mohd Nur Ikhmal Salehmin et al.

Summary: Microbial desalination cells (MDCs) have been proven to be a versatile bioelectrochemical system with potential to alleviate environmental pollution and water scarcity. However, standalone MDCs are not sufficient for complete wastewater and desalination treatment. Connecting identical MDC units or coupling MDCs with other technologies can improve performance, but scaling-up efforts have been slow and challenges remain unresolved.

SCIENCE OF THE TOTAL ENVIRONMENT (2021)

Add to Collection

Article Engineering, Chemical

Carbon electrode with cross-linked and charged chitosan binder for enhanced capacitive deionization performance

Jiaze Weng et al.

Summary: By crosslinking chitosan with glutaraldehyde, a stable three-dimensional network structure was achieved, enhancing the adsorption capacity and ion exchange membrane of the anode in CDI system.

DESALINATION (2021)

Add to Collection

Article Electrochemistry

Enhanced capacitive deionization of defect-containing MoS2/graphene composites through introducing appropriate MoS2 defect

Weijun Peng et al.

Summary: The defect-containing MoS2/rGO composites prepared via chemical etching exhibit superior electrochemical and desalination performance, with dMSG-5 showing the best performance. The presence of MoS2 defects enhances the ion insertion/extraction adsorption sites of the composite material, improving ion transport efficiency.

ELECTROCHIMICA ACTA (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Synchronous removal of tetracycline and water hardness ions by capacitive deionization

Na Sun et al.

Summary: A low-cost, efficient and eco-friendly capacitive deionization (CDI) technology was introduced to simultaneously remove tetracycline (TC) and water hardness ions. Hierarchical porous carbon material derived from kelp was used as electrodes, achieving high TC removal capacity and maintaining over 90% removal efficiency even after five CDI cycles. The study demonstrated the effective CDI technology in synchronous removal of tetracycline and water hardness ions for water purification.

JOURNAL OF CLEANER PRODUCTION (2021)

Add to Collection

Article Engineering, Environmental

Free-standing Ti3C2Tx MXene film as binder-free electrode in capacitive deionization with an ultrahigh desalination capacity

Jie Ma et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Article Nanoscience & Nanotechnology

MXene as a Cation-Selective Cathode Material for Asymmetric Capacitive Deionization

Bingbing Chen et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Engineering, Environmental

Capacitive deionization with nitrogen-doped highly ordered mesoporous carbon electrodes

Shichao Tian et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Article Electrochemistry

Nitrogen-doped porous carbon tubes composites derived from metal-organic framework for highly efficient capacitive deionization

Yang Zhao et al.

ELECTROCHIMICA ACTA (2020)

Add to Collection

Article Engineering, Chemical

Thermal conversion of polypyrrole nanotubes to nitrogen-doped carbon nanotubes for efficient water desalination using membrane capacitive deionization

Pengfei Shi et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2020)

Add to Collection

Article Nanoscience & Nanotechnology

MXene/Activated-Carbon Hybrid Capacitive Deionization for Permselective Ion Removal at Low and High Salinity

Mohammad Torkamanzadeh et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Engineering, Environmental

All-MXene-Based Integrated Membrane Electrode Constructed using Ti3C2Tx as an Intercalating Agent for High-Performance Desalination

Xiaojie Shen et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2020)

Add to Collection

Article Engineering, Chemical

Carbon nanotubes in-situ cross-linking the activated carbon electrode for high-performance capacitive deionization

Jiangzhou Xie et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2020)

Add to Collection

Article Engineering, Chemical

The polymeric conformational effect on capacitive deionization performance of graphene oxide/polypyrrole composite electrode

Ke Xu et al.

DESALINATION (2020)

Add to Collection

Article Chemistry, Physical

Three-dimensional nitrogen doped hierarchically porous carbon aerogels with ultrahigh specific surface area for high-performance supercapacitors and flexible micro-supercapacitors

Yunfang Gao et al.

CARBON (2020)

Add to Collection

Article Engineering, Chemical

Three-dimensional graphene oxide and polyvinyl alcohol composites as structured activated carbons for capacitive desalination

Zhi Yi Leong et al.

DESALINATION (2019)

Add to Collection

Article Electrochemistry

Nitrogen-rich mesoporous carbons derived from zeolitic imidazolate framework-8 for efficient capacitive deionization

Yubo Zhao et al.

ELECTROCHIMICA ACTA (2019)

Add to Collection

Article Engineering, Chemical

Nitrogen-doped hierarchical porous carbon aerogel for high-performance capacitive deionization

Xiaojun Liu et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2019)

Add to Collection

Article Chemistry, Physical

Comparative study on electrosorptive behavior of NH4HF2-etched Ti3C2 and HF-etched Ti3C2 for capacitive deionization

Aihu Feng et al.

IONICS (2019)

Add to Collection

Article Chemistry, Physical

Highly compact, free- standing porous electrodes from polymer- derived nanoporous carbons for efficient electrochemical capacitive deionization

Fei Ji et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Article Chemistry, Physical

A core-shell heterostructured CuFe@NiFe Prussian blue analogue as a novel electrode material for high-capacity and stable capacitive deionization

Yubo Zhao et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Article Chemistry, Physical

A Comparison of graphene hydrogels modified with single-walled/multi-walled carbon nanotubes as electrode materials for capacitive deionization

Jianglin Cao et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Two-Dimensional Molybdenum Carbide (MXene) with Divacancy Ordering for Brackish and Seawater Desalination via Cation and Anion Intercalation

Pattarachai Srimuk et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2018)

Add to Collection

Article Chemistry, Analytical

An electrochemical sensor based on Fe3O4@PANI nanocomposites for sensitive detection of Pb2+ and Cd2+

Ying Kong et al.

ANALYTICAL METHODS (2018)

Add to Collection

Article Chemistry, Physical

Ar plasma modification of 2D MXene Ti3C2Tx nanosheets for efficient capacitive desalination

Lu Guo et al.

FLATCHEM (2018)

Add to Collection

Article Chemistry, Physical

Porous Cryo-Dried MXene for Efficient Capacitive Deionization

Weizhai Bao et al.

JOULE (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Dual-ions electrochemical deionization: a desalination generator

Fuming Chen et al.

ENERGY & ENVIRONMENTAL SCIENCE (2017)

Add to Collection

Article Chemistry, Physical

MXene as a novel intercalation-type pseudocapacitive cathode and anode for capacitive deionization

Pattarachai Srimuk et al.

JOURNAL OF MATERIALS CHEMISTRY A (2016)

Add to Collection

Article Chemistry, Physical

One-pot fabrication of multifunctional superparamagnetic attapulgite/Fe3O4/polyaniline nanocomposites served as an adsorbent and catalyst support

Bin Mu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2015)

Add to Collection

Article Engineering, Chemical

Desalination by capacitive deionization process using nitric acid-modified activated carbon as the electrodes

Wei Huang et al.

DESALINATION (2014)

Add to Collection

Article Chemistry, Multidisciplinary

Hybrid capacitive deionization to enhance the desalination performance of capacitive techniques

Jaehan Lee et al.

ENERGY & ENVIRONMENTAL SCIENCE (2014)

Add to Collection

Article Energy & Fuels

Efficient technologies for worldwide clean water supply

F. Macedonio et al.

CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2012)

Add to Collection

Article Chemistry, Multidisciplinary

A Desalination Battery

Mauro Pasta et al.

NANO LETTERS (2012)

Add to Collection

Article Chemistry, Multidisciplinary

High-Energy MnO2 Nanowire/Graphene and Graphene Asymmetric Electrochemical Capacitors

Zhong-Shuai Wu et al.

ACS NANO (2010)

Add to Collection

© Peeref 2019-2024. All rights reserved.