4.7 Article

Interaction of silty sand and preformed corrosion products on N80 carbon steel in CO2 environment

Related references

Note: Only part of the references are listed.
Article Materials Science, Multidisciplinary

In-depth insight into the synergistic inhibition mechanism of S-benzyl-L-cysteine and thiourea on the corrosion of carbon steel in the CO2-saturated oilfield produced water

Q. H. Zhang et al.

Summary: The study found that SBLC and TU have a significant synergistic corrosion inhibition effect on carbon steel, and the synergistic mechanism was elucidated by theoretical calculations, showing that the intermolecular interaction between SBLC and TU molecules leads to the formation of a stronger adsorbed film.

CORROSION SCIENCE (2021)

Article Materials Science, Multidisciplinary

Inhibition performance of benzimidazole derivatives with different heteroatoms on the under-deposit corrosion of carbon steel in CO2-saturated solution

L. Pang et al.

Summary: In this study, the inhibition performance of different benzimidazole compounds on under-deposit corrosion of carbon steel in CO2-saturated solutions beneath CaCO3 and SiO2 deposits was compared. It was found that 2-SH-BI had the highest inhibition efficiency, and the effectiveness of different inhibitors varied under different deposits.

CORROSION SCIENCE (2021)

Article Materials Science, Multidisciplinary

Application of Scratch Testing for the Assessment of the Adherent Properties of Scales and CO2 Corrosion Product Layers and their Relation to Corrosion

Claudia Prieto et al.

Summary: Operational conditions play a crucial role in controlling pipeline corrosion and iron carbonate may be a key factor in this process. Research indicates that the presence of iron calcium carbonate layers contributes to the formation of a protective and mechanically stable iron carbonate layer.

CORROSION SCIENCE (2021)

Article Materials Science, Multidisciplinary

Impact of corrosion products on performance of imidazoline corrosion inhibitor on X65 carbon steel in CO2 environments

Amir Shamsa et al.

Summary: The impact of pre-corrosion on the performance of an imidazoline-based corrosion inhibitor in CO2 environments was evaluated. It was found that corrosion protection depended on inhibitor adsorption/film formation and the presence of corrosion products. The presence of a continuous FeCO3-rich layer significantly reduced the overall protection provided by the corrosion inhibitor.

CORROSION SCIENCE (2021)

Article Electrochemistry

Electrochemical investigation into the dynamic mechanism of CO2 corrosion product film formation on the carbon steel under the water-condensation condition

Md Mayeedul Islam et al.

Summary: The study investigates the in-situ monitoring of CO2 corrosion of carbon steel and FeCO3 precipitation under continuous replenishing of condensed water conditions using a newly developed electrochemical probe. The research identifies three stages of corrosion and film formation, and confirms the presence of a protective film with a dual-layer structure.

ELECTROCHIMICA ACTA (2021)

Article Energy & Fuels

Sand Production of the Shale Gas Well in Different Production Periods: Structure and Component

Xiangchen Li et al.

Summary: A study conducted on sand samples collected from shale gas wells in the Sichuan Basin of China revealed differences in the size, shape, composition, and organic material adhesion of sand produced in different production phases. The main sources of sand production were found to be shale fractures and proppant failure.

ENERGIES (2021)

Article Energy & Fuels

Effects of Proppant Wettability and Size on Transport and Retention of Coal Fines in Saturated Proppant Packs: Experimental and Theoretical Studies

Fansheng Huang et al.

Summary: Hydraulic fracturing is the key technique for extracting coalbed methane, but coal fines retention can lead to fracture conductivity impairment. This study investigated the effects of proppant wettability and size on coal fines retention, finding that increasing proppant hydrophilicity and size decreases fines retention. Analysis of forces and torques on coal fines near proppants showed that proppant wettability and size affect fines retention mechanisms.

ENERGY & FUELS (2021)

Article Materials Science, Multidisciplinary

Comparisons of corrosion behaviour for X65 and low Cr steels in high pressure CO2-saturated brine

Yong Hua et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)

Article Materials Science, Multidisciplinary

Effect of silty sand on the pre-passivation behaviour of 1Cr steel in a CO2 aqueous environment

Yonggang Zhao et al.

CORROSION ENGINEERING SCIENCE AND TECHNOLOGY (2020)

Article Materials Science, Multidisciplinary

A study on the interaction between chloride ions and CO2 towards carbon steel corrosion

Shaohua Zhang et al.

CORROSION SCIENCE (2020)

Article Chemistry, Physical

Synergistic effect and mechanism of copper corrosion inhibition using cinnamaldehyde and vanillin in HCl solution: An experimental and theoretical approach

Zhen Wang et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2019)

Article Engineering, Chemical

Corrosion of carbon steel in presence of mixed deposits under stagnant seawater conditions

Xiang Wang et al.

JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2017)

Article Energy & Fuels

Organosilane film for sand migration control based on in-situ hydrolysis and polycondensation effects

Xiaqing Li et al.

JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2017)

Article Energy & Fuels

A new integrated method for comprehensive performance of mechanical sand control screens testing and evaluation

Changyin Dong et al.

JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2017)

Article Engineering, Marine

Long-term under-deposit pitting corrosion of carbon steel pipes

Xiang Wang et al.

OCEAN ENGINEERING (2017)

Article Metallurgy & Metallurgical Engineering

Corrosion Performance of Carbon Steel in CO2 Aqueous Environment Containing Silty Sand with Different Sizes

Songle Lu et al.

ACTA METALLURGICA SINICA-ENGLISH LETTERS (2017)

Article Chemistry, Physical

Effect of silty sand in formation water on CO2 corrosion behavior of carbon steel

Wei Liu et al.

APPLIED SURFACE SCIENCE (2016)

Article Materials Science, Multidisciplinary

Condensation corrosion of carbon steel at low to moderate surface temperature and iron carbonate precipitation kinetics

Md Mayeedul Islam et al.

CORROSION SCIENCE (2016)

Article Materials Science, Multidisciplinary

Chukanovite (Fe2(OH)2CO3) identified as a corrosion product at sand-deposited carbon steel in CO2-saturated brine

Vedapriya Pandarinathan et al.

CORROSION SCIENCE (2014)

Review Energy & Fuels

A comprehensive review of solid particle erosion modeling for oil and gas wells and pipelines applications

Mazdak Parsi et al.

JOURNAL OF NATURAL GAS SCIENCE AND ENGINEERING (2014)

Article Metallurgy & Metallurgical Engineering

Electrochemical behavior and mechanism of CO2 corrosion on P110 steel in simulated oilfield solution

Z. F. Yin et al.

ANTI-CORROSION METHODS AND MATERIALS (2011)

Article Electrochemistry

Spontaneous passivation observations during scale formation on mild steel in CO2 brines

Jiabin Han et al.

ELECTROCHIMICA ACTA (2011)

Review Electrochemistry

Electrochemical study of 2-mercaptoimidazole as a novel corrosion inhibitor for steels

R. Alvarez-Bustamante et al.

ELECTROCHIMICA ACTA (2009)

Article Materials Science, Multidisciplinary

Fe3C influence on the corrosion rate of mild steel in aqueousCO2 systems under turbulent flow conditions

JL Mora-Mendoza et al.

CORROSION SCIENCE (2002)